# Invocation command line: # /home/cpu2017/bin/harness/runcpu --configfile amd1704na-rate-revD.cfg --tune all --nopower --runmode rate --tune base:peak --size test:train:refrate fprate # output_root was not used for this run ############################################################################ ################################################################################ # AMD1704 SPEC CPU2017 V1.0.2 Rate Configuration File for 64-bit Linux # # File name : amd1704na-rate-revD.cfg # Creation Date : July 10, 2018 # CPU2017 Version : 1.0.5 # Supported benchmarks : All Rate benchmarks (intrate, fprate) # Compiler name/version : AOCC/1.2.1 # Operating system version : Ubuntu 18.04 # Supported OS's : Ubuntu 16.04/18.04, RHEL 7.4/7.5, SLES 12 SP3 # Hardware : AMD Naples (AMD64) # FP Base Pointer Size : 64-bit # FP Peak Pointer Size : 32/64-bit # INT Base Pointer Size : 64-bit # INT Peak Pointer Size : 32/64-bit # Auto Parallization : No # # Note: DO NOT EDIT THIS FILE, the only edits required to properly run these # binaries are made in AMD1704na-rate-revD.inc. Please consult Readme.amd1704na_revD.txt # for a few uncommon exceptions which require edits to this file. # # Description:# # This binary package automates away many of the complexities necessary to set # up and run SPEC CPU2017 under optimized conditions on AMD Naples-based # server platforms within Linux (AMD64). # # The binary package was built specifically for AMD Naples microprocessors and # is not intended to run on other products. # # Please install the binary package by following the instructions in # "Readme.amd1704na_revD.txt" under the "How To Use the Binaries" section. # # The binary package is designed to work without alteration on two socket AMD # Naples-based servers with 32 cores per socket, SMT enabled and 512 GiB of DDR4 # memory distributed evenly among all 16 channels using 16 GiB DIMMs. # # To run the binary package on other Naples configurations, please review # "Readme.amd1704na_revD.txt" for instructions on how to easily modify # the CPU2017 configuration include file "AMD1704na-rate-revD.inc". Typically, # the number of sockets, number of cores per socket, SMT state and memory # size values will need to be changed in amd1704na-rate-revX.inc. Furthermore, # modify necessary system specific and test specific documentation within this # file. Again, refer to Readme.amd1704na-rate-revX.txt for more information. # # In most cases, it should be unnecessary to edit "AMD1704na-rate-revD.cfg" or any # other file besides "AMD1704na-rate-revD.inc". # # The config file automatically sets the number of rate copies equal to the # number of logical processors and automatically binds each copy to a unique # logical core. # # The run script and accompanying binary package are designed to work on Ubuntu # 18.04/16.04, RHEL 7.4/7.5 and SLES 12 SP3. # # Important! If you write your own run script, please set the stack size to # "unlimited" when executing this binary package. Failure to do so may cause # some benchmarks to overflow the stack. For example, to set stack size within # the bash shell, include the following line somewhere at the top of your run # script before the runcpu invocation: # # ulimit -s unlimited # # Modification of this config file should only be necessary if you intend to # rebuild the binaries. General instructions for rebuilding the binaries are # found in-line below. # ################################################################################ # Include file name ################################################################################ # The include file contains fields that are commonly changed. This is usually # the only file that needs modification for runs. %define inc_file_name AMD1704na-rate-revD.inc #include: %{inc_file_name} # ----- Begin inclusion of 'AMD1704na-rate-revD.inc' ############################################################################ ################################################################################ ################################################################################ # File name: AMD1704na-rate-revD.inc # File generation code date: May 29, 2018 # File generation date/time: November 01, 2018 / 13:55:43 # # This file is automatically generated during a SPEC CPU2017 run. # # To modify inc file generation, please consult the readme file or the run # script. ################################################################################ ################################################################################ ################################################################################ ################################################################################ # The following macros are generated for use in the cfg file. ################################################################################ ################################################################################ %define logical_core_count 48 %define physical_core_count 24 # The following macros define the rate copy counts for the peak benchmarks. # Int Rate Peak copy counts: %define copies_500perlbench 48 %define copies_502gcc 24 %define copies_505mcf 48 %define copies_520omnetpp 48 %define copies_523xalancbmk 48 %define copies_525x264 48 %define copies_531deepsjeng 48 %define copies_541leela 48 %define copies_548exchange 48 %define copies_557xz 48 # FP Rate Peak copy counts: %define copies_503bwaves 24 %define copies_507cactus 48 %define copies_508namd 48 %define copies_510parest 24 %define copies_511povray 48 %define copies_519lbm 48 %define copies_521wrf 48 %define copies_526blender 48 %define copies_527cam4 48 %define copies_538imagick 48 %define copies_544nab 48 %define copies_549fotonik 48 %define copies_554roms 24 # Base copy counts: %define copies_base_int 48 %define copies_base_fp 48 ################################################################################ ################################################################################ ################################################################################ ################################################################################ # Bind commands for assigning affinity ################################################################################ ################################################################################ bind0 = numactl --localalloc --physcpubind=0 bind1 = numactl --localalloc --physcpubind=1 bind2 = numactl --localalloc --physcpubind=2 bind3 = numactl --localalloc --physcpubind=3 bind4 = numactl --localalloc --physcpubind=4 bind5 = numactl --localalloc --physcpubind=5 bind6 = numactl --localalloc --physcpubind=6 bind7 = numactl --localalloc --physcpubind=7 bind8 = numactl --localalloc --physcpubind=8 bind9 = numactl --localalloc --physcpubind=9 bind10 = numactl --localalloc --physcpubind=10 bind11 = numactl --localalloc --physcpubind=11 bind12 = numactl --localalloc --physcpubind=12 bind13 = numactl --localalloc --physcpubind=13 bind14 = numactl --localalloc --physcpubind=14 bind15 = numactl --localalloc --physcpubind=15 bind16 = numactl --localalloc --physcpubind=16 bind17 = numactl --localalloc --physcpubind=17 bind18 = numactl --localalloc --physcpubind=18 bind19 = numactl --localalloc --physcpubind=19 bind20 = numactl --localalloc --physcpubind=20 bind21 = numactl --localalloc --physcpubind=21 bind22 = numactl --localalloc --physcpubind=22 bind23 = numactl --localalloc --physcpubind=23 bind24 = numactl --localalloc --physcpubind=24 bind25 = numactl --localalloc --physcpubind=25 bind26 = numactl --localalloc --physcpubind=26 bind27 = numactl --localalloc --physcpubind=27 bind28 = numactl --localalloc --physcpubind=28 bind29 = numactl --localalloc --physcpubind=29 bind30 = numactl --localalloc --physcpubind=30 bind31 = numactl --localalloc --physcpubind=31 bind32 = numactl --localalloc --physcpubind=32 bind33 = numactl --localalloc --physcpubind=33 bind34 = numactl --localalloc --physcpubind=34 bind35 = numactl --localalloc --physcpubind=35 bind36 = numactl --localalloc --physcpubind=36 bind37 = numactl --localalloc --physcpubind=37 bind38 = numactl --localalloc --physcpubind=38 bind39 = numactl --localalloc --physcpubind=39 bind40 = numactl --localalloc --physcpubind=40 bind41 = numactl --localalloc --physcpubind=41 bind42 = numactl --localalloc --physcpubind=42 bind43 = numactl --localalloc --physcpubind=43 bind44 = numactl --localalloc --physcpubind=44 bind45 = numactl --localalloc --physcpubind=45 bind46 = numactl --localalloc --physcpubind=46 bind47 = numactl --localalloc --physcpubind=47 submit = echo "$command" > run.sh ; $BIND bash run.sh ################################################################################ ################################################################################ # The remainder of this file defines CPU2017 report parameters. ################################################################################ ################################################################################ ################################################################################ # SPEC CPU 2017 report header ################################################################################ license_num =001176 # (Your SPEC license number) tester =Supermicro test_sponsor =Supermicro hw_vendor =Supermicro hw_model000 =A+ Server 1113S-WN10RT hw_model001 =(H11SSW-NT , AMD EPYC 7401P) #--------- If you install new compilers, edit this section -------------------- sw_compiler000 =C/C++: Version 1.0.0 of AOCC sw_compiler001 =Fortran: Version 4.8.2 of GCC ################################################################################ ################################################################################ # Hardware, firmware and software information ################################################################################ hw_avail =Sep-2018 # Date of LAST hardware component to ship sw_avail =Feb-2018 # Date of LAST software component to ship hw_cpu_name =AMD EPYC 7401P hw_cpu_nominal_mhz =2000 hw_cpu_max_mhz =3000 hw_ncores =24 hw_nthreadspercore =2 hw_ncpuorder =1 chip hw_other =None # Other perf-relevant hw, or "None" fw_bios =Supermicro BIOS version 1.0 released Sep-2018 # Ex: BIOS American Megatrends Inc. 0205 Jul-2018 sw_base_ptrsize =64-bit hw_pcache =64 KB I + 32 KB D on chip per core hw_scache =512 KB I+D on chip per core hw_tcache =64 MB I+D on chip per chip, 8 MB shared / 3 cores hw_ocache =None ################################################################################ # Notes ################################################################################ notes_plat_000 =BIOS Settings: notes_plat_005 =Determinism Slider = Power #notes_plat_002 =cTDP Control = Manual #notes_plat_003 =cTDP = 200 notes_020 =Binaries were compiled on a system with 2x AMD EPYC 7601 CPU + 512GB Memory using RHEL 7.4 notes_065 =NA: The test sponsor attests, as of date of publication, that CVE-2017-5754 (Meltdown) notes_070 =is mitigated in the system as tested and documented. notes_075 =Yes: The test sponsor attests, as of date of publication, that CVE-2017-5753 (Spectre variant 1) notes_080 =is mitigated in the system as tested and documented. notes_085 =Yes: The test sponsor attests, as of date of publication, that CVE-2017-5715 (Spectre variant 2) notes_090 =is mitigated in the system as tested and documented. notes_submit_000 ='numactl' was used to bind copies to the cores. notes_submit_005 =See the configuration file for details. notes_os_000 ='ulimit -s unlimited' was used to set environment stack size notes_os_005 ='ulimit -l 2097152' was used to set environment locked pages in memory limit notes_os_010 = notes_os_015 =runspec command invoked through numactl i.e.: notes_os_020 =numactl --interleave=all runspec notes_os_025 = notes_os_030 =Set dirty_ratio=8 to limit dirty cache to 8% of memory notes_os_035 =Set swappiness=1 to swap only if necessary notes_os_040 =Set zone_reclaim_mode=1 to free local node memory and avoid remote memory notes_os_045 =sync then drop_caches=3 to reset caches before invoking runcpu notes_os_050 = notes_os_055 =dirty_ratio, swappiness, zone_reclaim_mode and drop_caches were notes_os_060 =all set using privileged echo (e.g. echo 1 > /proc/sys/vm/swappiness). notes_os_065 = notes_os_070 =Transparent huge pages were enabled for this run (OS default) notes_comp_000 =The AMD64 AOCC Compiler Suite is available at notes_comp_005 =http://developer.amd.com/amd-aocc/ notes_comp_010 = notes_comp_015 =The AOCC Gold Linker plugin was installed and used for the link stage. notes_comp_020 = notes_comp_025 =The AOCC Fortran Plugin version 1.0 was used to leverage AOCC optimizers notes_comp_030 =with gfortran. It is available here: notes_comp_035 =http://developer.amd.com/amd-aocc/ ################################################################################ # The following fields must be set here for Int Rate. ################################################################################ intrate: sw_other000 =jemalloc general purpose malloc implementation sw_other001 =V4.5.0 notes_100 =jemalloc, a general purpose malloc implementation, was obtained at notes_101 =https://github.com/jemalloc/jemalloc/releases/download/4.5.0/jemalloc-4.5.0.tar.bz2 notes_102 =jemalloc was built with GCC v4.8.5 in RHEL v7.2 under default conditions. notes_103 =jemalloc uses environment variable MALLOC_CONF with values narenas and lg_chunk: notes_104 = narenas: sets the maximum number of arenas to use for automatic multiplexing notes_105 = of threads and arenas. notes_106 = lg_chunk: set the virtual memory chunk size (log base 2). For example, notes_107 = lg_chunk:21 sets the default chunk size to 2^21 = 2MiB. sw_peak_ptrsize =32/64-bit ################################################################################ # The following fields must be set here for FP Rate. ################################################################################ fprate: #sw_other =None # Other perf-relevant sw, or "None" sw_other000 =jemalloc general purpose malloc implementation sw_other001 =V4.5.0 notes_025 =jemalloc, a general purpose malloc implementation, was obtained at notes_030 =https://github.com/jemalloc/jemalloc/releases/download/4.5.0/jemalloc-4.5.0.tar.bz2 notes_035 =jemalloc was built with GCC v4.8.5 in RHEL v7.2 under default conditions. notes_040 =jemalloc uses environment variable MALLOC_CONF with values narenas and lg_chunk: notes_045 = narenas: sets the maximum number of arenas to use for automatic multiplexing notes_050 = of threads and arenas. notes_055 = lg_chunk: set the virtual memory chunk size (log base 2). For example, notes_060 = lg_chunk:21 sets the default chunk size to 2^21 = 2MiB. sw_peak_ptrsize =64-bit ################################################################################ # The following fields must be set here or they will be overwritten by sysinfo. ################################################################################ intrate,fprate: hw_disk =1 x 200 GB SATA III SSD # ex: 1 x 1 TB SSD hw_memory =512 GB (8 x 64 GB 4Rx4 PC4-2666V-L) hw_nchips =1 prepared_by =Supermicro # ex: Advanced Micro Devices sw_file =xfs # ex1: ext4, ex2: ntfs sw_os000 =SUSE Linux Enterprise Server 12 SP3 (x86_64) # ex: Ubuntu 16.04 LTS, sw_os001 =kernel 4.4.114-94.11-default # ex: Kernel 4.4.0-87-generic sw_os002 = sw_state =Run level 3 (multi-user) # ex: Run level 3 (Full multiuser with network) ################################################################################ # End of inc file ################################################################################ # Switch back to the default block after the include file: default: # ---- End inclusion of '/home/cpu2017/config/AMD1704na-rate-revD.inc' # Switch back to default block after the include file: default: ################################################################################ # Binary label extension and "allow_build"" switch ################################################################################ # Only modify the binary label extension if you plan to rebuild the binaries. %define ext amd1704-rate-revD # If you plan to recompile these CPU2017 binaries, please choose a new extension # name (ext above) to avoid confusion with the current binary set on your system # under test, and to avoid confusion for SPEC submission reviewers. You will # also need to set "allow_build" to true below. Finally, you must modify the # Paths section below to point to your library locations if the paths are not # already set up in your build environment. # Change the following line to true if you intend to REBUILD the binaries (AMD # does not support this). Valid values are "true" or "false" (no quotes). %define allow_build false # ################################################################################ # Paths -- MODIFY AS NEEDED (modification should not be necessary for runs) ################################################################################ # Set location of runtime libraries for runs or builds. preenv = 1 %define lib_dir amd1704-rate-libs-revD # The following path will have to be changed on the build system if different: JEMALLOC_LIB32_PATH = /root/work/lib/jemalloc/lib32 %if '%{allow_build}' eq 'false' fail_build = 1 # Runtime libraries: preENV_LD_LIBRARY_PATH = $[top]/%{lib_dir}/64;$[top]/%{lib_dir}/32:%{ENV_LD_LIBRARY_PATH} %elif '%{allow_build}' eq 'true' # If you intend to rebuild, be sure to set the library paths either in the # build script or here: % define build_ncpus 16 # controls number of simultaneous compiles fail_build = 0 makeflags = --jobs=%{build_ncpus} --load-average=%{build_ncpus} %else % error The value of "allow_build" is %{allow_build}, but it can only be "true" or "false". This error was generated %endif ################################################################################ # Header settings ################################################################################ backup_config = 0 # set to 0 if you do not want backup files bench_post_setup = sync # command_add_redirect: If set, the generated ${command} will include # redirection operators (stdout, stderr), which are passed along to the shell # that executes the command. If this variable is not set, specinvoke does the # redirection. NOTE: this value must be "yes" for the affinity generation # section of this config file. command_add_redirect = yes check_md5 = yes env_vars = no flagsurl000 = http://www.spec.org/cpu2017/flags/aocc100-flags-revC-I.2018-11-13.xml flagsurl001 = http://www.spec.org/cpu2017/flags/gcc.2018-02-16.xml flagsurl002 = http://www.spec.org/cpu2017/flags/Supermicro-Platform-Settings-V1.2-Naples-revD.xml ignore_errors = no # label: Arbitrary string, tags your binaries & directories. label = %{ext} line_width = 1020 log_line_width = 1020 mean_anyway = yes output_format = all reportable = yes size = test,train,ref teeout = yes teerunout = yes tune = base,peak ################################################################################ # Compilers ################################################################################ default: CC = clang CXX = clang++ FC = gfortran CLD = clang FLD = clang CC_VERSION_OPTION = --version CXX_VERSION_OPTION = --version FC_VERSION_OPTION = --version ################################################################################ # Portability Flags ################################################################################ default:# data model applies to all benchmarks EXTRA_PORTABILITY = -DSPEC_LP64 # Benchmark-specific portability (anything other than data model # is allowed only where need is proven # Benchmark-specific portability (anything other than data model # is allowed only where need is proven 500.perlbench_r,600.perlbench_s: #lang='C' PORTABILITY = -DSPEC_LINUX_X64 521.wrf_r,621.wrf_s: #lang='F,C' CPORTABILITY = -DSPEC_CASE_FLAG FPORTABILITY = -fconvert=big-endian 523.xalancbmk_r,623.xalancbmk_s: #lang='CXX' PORTABILITY = -DSPEC_LINUX 526.blender_r: #lang='CXX,C' CPORTABILITY = -funsigned-char CXXPORTABILITY = -D__BOOL_DEFINED 527.cam4_r,627.cam4_s: #lang='F,C' PORTABILITY = -DSPEC_CASE_FLAG 628.pop2_s: #lang='F,C' CPORTABILITY = -DSPEC_CASE_FLAG FPORTABILITY = -fconvert=big-endian ################################################################################ # Tuning Flags ################################################################################ ##################### # Base tuning flags # ##################### default=base: COPTIMIZE = -O3 -flto -ffast-math -march=znver1 -fstruct-layout=2 \ -mllvm -unroll-threshold=100 -fremap-arrays \ -mno-avx2 -mllvm -inline-threshold=1000 \ -mllvm -disable-vect-cmp CXXOPTIMIZE = -O3 -flto -march=znver1 \ -mllvm -unroll-threshold=100 -finline-aggressive \ -fremap-arrays -mllvm -inline-threshold=1000 \ -mllvm -disable-vect-cmp FOPTIMIZE = -O3 -mavx -madx -funroll-loops -ffast-math EXTRA_FFLAGS = -fplugin=dragonegg.so \ -fplugin-arg-dragonegg-llvm-option="-merge-constant -disable-vect-cmp" EXTRA_FLIBS = -lgfortran -lamdlibm -lm EXTRA_LDFLAGS = -flto -Wl,-plugin-opt=-merge-constant \ -Wl,-plugin-opt=-lsr-in-nested-loop \ -Wl,-plugin-opt=-disable-vect-cmp EXTRA_LIBS = -ljemalloc # The following is necessary for 502/602 gcc: LDOPTIMIZE = -z muldefs ######################## # intrate tuning flags # ######################## intrate: EXTRA_FFLAGS = -Ofast -fdefault-integer-8 -fplugin=dragonegg.so \ -fplugin-arg-dragonegg-llvm-option="-lsr-in-nested-loop \ -enable-iv-split -merge-constant -inline-threshold:1000 -disable-vect-cmp" preENV_MALLOC_CONF = lg_chunk:26 sw_peak_ptrsize =32/64-bit copies = %{copies_base_int} ####################### # fprate tuning flags # ####################### fprate: preENV_MALLOC_CONF = lg_chunk:28 sw_peak_ptrsize =64-bit copies = %{copies_base_fp} ##################### # Peak tuning flags # ##################### default=peak: COPTIMIZE = -Ofast -flto -march=znver1 -fstruct-layout=3 \ -mllvm -vectorize-memory-aggressively -mno-avx2 \ -mllvm -unroll-threshold=100 -fremap-arrays \ -mllvm -inline-threshold=1000 CXXOPTIMIZE = -Ofast -flto -march=znver1 -finline-aggressive \ -mllvm -unroll-threshold=100 -fremap-arrays \ -mllvm -inline-threshold=1000 FOPTIMIZE = -O3 -mavx2 -madx -funroll-loops -ffast-math EXTRA_FFLAGS = -fplugin=dragonegg.so \ -fplugin-arg-dragonegg-llvm-option="-merge-constant -inline-threshold:1000" EXTRA_FLIBS = -lgfortran -lamdlibm -lm EXTRA_LDFLAGS = -flto -Wl,-plugin-opt=-merge-constant \ -Wl,-plugin-opt=-lsr-in-nested-loop EXTRA_LIBS = -ljemalloc feedback = 0 PASS1_CFLAGS = -fprofile-instr-generate PASS2_CFLAGS = -fprofile-instr-use PASS1_FFLAGS = -fprofile-generate PASS2_FFLAGS = -fprofile-use PASS1_CXXFLAGS = -fprofile-instr-generate PASS2_CXXFLAGS = -fprofile-instr-use PASS1_LDFLAGS = -fprofile-instr-generate PASS2_LDFLAGS = -fprofile-instr-use fdo_run1 = $command ; llvm-profdata merge -output=default.profdata *.profraw 500.perlbench_r=peak: #lang='C' feedback = 1 copies = %{copies_500perlbench} 502.gcc_r=peak: #lang='C' EXTRA_PORTABILITY = -D_FILE_OFFSET_BITS=64 EXTRA_COPTIMIZE = -fgnu89-inline CC = clang -m32 CLD = clang -m32 EXTRA_LIBS = -L$[JEMALLOC_LIB32_PATH] -ljemalloc copies = %{copies_502gcc} 503.bwaves_r=peak: copies = %{copies_503bwaves} 505.mcf_r=peak: copies = %{copies_505mcf} 507.cactuBSSN_r=peak: copies = %{copies_507cactus} 508.namd_r=peak: copies = %{copies_508namd} 510.parest_r=peak: copies = %{copies_510parest} 511.povray_r=peak: copies = %{copies_511povray} 519.lbm_r=peak: copies = %{copies_519lbm} 520.omnetpp_r=peak: copies = %{copies_520omnetpp} 521.wrf_r,621.wrf_s=peak: #lang='F,C' COPTIMIZE = -O3 -mavx -ffast-math FOPTIMIZE = -O3 -mavx -funroll-loops -ffast-math copies = %{copies_521wrf} 523.xalancbmk_r=peak: #lang='CXX` EXTRA_PORTABILITY = -D_FILE_OFFSET_BITS=64 CXX = clang++ -m32 CXXLD = clang++ -m32 EXTRA_LIBS = -L$[JEMALLOC_LIB32_PATH] -ljemalloc copies = %{copies_523xalancbmk} 525.x264_r=peak: #lang='C' feedback = 1 copies = %{copies_525x264} 526.blender_r=peak: #lang='C' copies = %{copies_526blender} 527.cam4_r=peak: #lang='C' copies = %{copies_527cam4} 531.deepsjeng_r=peak: #lang='C' copies = %{copies_531deepsjeng} 538.imagick_r=peak: #lang='C' copies = %{copies_538imagick} 541.leela_r=peak: #lang="C++" CXXOPTIMIZE = -Ofast -flto -march=znver1 -mllvm -unroll-count=8 \ -mllvm -unroll-threshold=100 feedback = 1 copies = %{copies_541leela} 544.nab_r=peak: #lang='C' copies = %{copies_544nab} 548.exchange2_r=peak: #lang='C' copies = %{copies_548exchange} 549.fotonik3d_r=peak: copies = %{copies_549fotonik} 554.roms_r=peak: copies = %{copies_554roms} 557.xz_r=peak: copies = %{copies_557xz} # The following settings were obtained by running the sysinfo_program # 'specperl $[top]/bin/sysinfo' (sysinfo:SHA:32259ebd59f3e93740723202f27c44c82ee68e0f2e40cd2ca50cfd5519772397) default: notes_plat_sysinfo_000 = Sysinfo program /home/cpu2017/bin/sysinfo notes_plat_sysinfo_005 = Rev: r5974 of 2018-05-19 9bcde8f2999c33d61f64985e45859ea9 notes_plat_sysinfo_010 = running on linux-pm02 Wed Nov 14 04:49:50 2018 notes_plat_sysinfo_015 = notes_plat_sysinfo_020 = SUT (System Under Test) info as seen by some common utilities. notes_plat_sysinfo_025 = For more information on this section, see notes_plat_sysinfo_030 = https://www.spec.org/cpu2017/Docs/config.html#sysinfo notes_plat_sysinfo_035 = notes_plat_sysinfo_040 = From /proc/cpuinfo notes_plat_sysinfo_045 = model name : AMD EPYC 7401P 24-Core Processor notes_plat_sysinfo_050 = 1 "physical id"s (chips) notes_plat_sysinfo_055 = 48 "processors" notes_plat_sysinfo_060 = cores, siblings (Caution: counting these is hw and system dependent. The following notes_plat_sysinfo_065 = excerpts from /proc/cpuinfo might not be reliable. Use with caution.) notes_plat_sysinfo_070 = cpu cores : 24 notes_plat_sysinfo_075 = siblings : 48 notes_plat_sysinfo_080 = physical 0: cores 0 1 2 4 5 6 8 9 10 12 13 14 16 17 18 20 21 22 24 25 26 28 29 30 notes_plat_sysinfo_085 = notes_plat_sysinfo_090 = From lscpu: notes_plat_sysinfo_095 = Architecture: x86_64 notes_plat_sysinfo_100 = CPU op-mode(s): 32-bit, 64-bit notes_plat_sysinfo_105 = Byte Order: Little Endian notes_plat_sysinfo_110 = CPU(s): 48 notes_plat_sysinfo_115 = On-line CPU(s) list: 0-47 notes_plat_sysinfo_120 = Thread(s) per core: 2 notes_plat_sysinfo_125 = Core(s) per socket: 24 notes_plat_sysinfo_130 = Socket(s): 1 notes_plat_sysinfo_135 = NUMA node(s): 4 notes_plat_sysinfo_140 = Vendor ID: AuthenticAMD notes_plat_sysinfo_145 = CPU family: 23 notes_plat_sysinfo_150 = Model: 1 notes_plat_sysinfo_155 = Model name: AMD EPYC 7401P 24-Core Processor notes_plat_sysinfo_160 = Stepping: 2 notes_plat_sysinfo_165 = CPU MHz: 2000.000 notes_plat_sysinfo_170 = CPU max MHz: 2000.0000 notes_plat_sysinfo_175 = CPU min MHz: 1200.0000 notes_plat_sysinfo_180 = BogoMIPS: 3999.77 notes_plat_sysinfo_185 = Virtualization: AMD-V notes_plat_sysinfo_190 = L1d cache: 32K notes_plat_sysinfo_195 = L1i cache: 64K notes_plat_sysinfo_200 = L2 cache: 512K notes_plat_sysinfo_205 = L3 cache: 8192K notes_plat_sysinfo_210 = NUMA node0 CPU(s): 0-5,24-29 notes_plat_sysinfo_215 = NUMA node1 CPU(s): 6-11,30-35 notes_plat_sysinfo_220 = NUMA node2 CPU(s): 12-17,36-41 notes_plat_sysinfo_225 = NUMA node3 CPU(s): 18-23,42-47 notes_plat_sysinfo_230 = Flags: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov notes_plat_sysinfo_235 = pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt pdpe1gb rdtscp lm notes_plat_sysinfo_240 = constant_tsc rep_good nopl nonstop_tsc extd_apicid amd_dcm aperfmperf eagerfpu pni notes_plat_sysinfo_245 = pclmulqdq monitor ssse3 fma cx16 sse4_1 sse4_2 movbe popcnt aes xsave avx f16c notes_plat_sysinfo_250 = rdrand lahf_lm cmp_legacy svm extapic cr8_legacy abm sse4a misalignsse 3dnowprefetch notes_plat_sysinfo_255 = osvw skinit wdt tce topoext perfctr_core perfctr_nb bpext perfctr_l2 mwaitx arat cpb notes_plat_sysinfo_260 = hw_pstate retpoline retpoline_amd npt lbrv svm_lock nrip_save tsc_scale vmcb_clean notes_plat_sysinfo_265 = flushbyasid decodeassists pausefilter pfthreshold vmmcall avic fsgsbase bmi1 avx2 notes_plat_sysinfo_270 = smep bmi2 rdseed adx smap clflushopt sha_ni xsaveopt xsavec xgetbv1 clzero irperf notes_plat_sysinfo_275 = ibpb overflow_recov succor smca notes_plat_sysinfo_280 = notes_plat_sysinfo_285 = /proc/cpuinfo cache data notes_plat_sysinfo_290 = cache size : 512 KB notes_plat_sysinfo_295 = notes_plat_sysinfo_300 = From numactl --hardware WARNING: a numactl 'node' might or might not correspond to a notes_plat_sysinfo_305 = physical chip. notes_plat_sysinfo_310 = available: 4 nodes (0-3) notes_plat_sysinfo_315 = node 0 cpus: 0 1 2 3 4 5 24 25 26 27 28 29 notes_plat_sysinfo_320 = node 0 size: 128826 MB notes_plat_sysinfo_325 = node 0 free: 128628 MB notes_plat_sysinfo_330 = node 1 cpus: 6 7 8 9 10 11 30 31 32 33 34 35 notes_plat_sysinfo_335 = node 1 size: 129021 MB notes_plat_sysinfo_340 = node 1 free: 128853 MB notes_plat_sysinfo_345 = node 2 cpus: 12 13 14 15 16 17 36 37 38 39 40 41 notes_plat_sysinfo_350 = node 2 size: 129021 MB notes_plat_sysinfo_355 = node 2 free: 128873 MB notes_plat_sysinfo_360 = node 3 cpus: 18 19 20 21 22 23 42 43 44 45 46 47 notes_plat_sysinfo_365 = node 3 size: 129020 MB notes_plat_sysinfo_370 = node 3 free: 128862 MB notes_plat_sysinfo_375 = node distances: notes_plat_sysinfo_380 = node 0 1 2 3 notes_plat_sysinfo_385 = 0: 10 16 16 16 notes_plat_sysinfo_390 = 1: 16 10 16 16 notes_plat_sysinfo_395 = 2: 16 16 10 16 notes_plat_sysinfo_400 = 3: 16 16 16 10 notes_plat_sysinfo_405 = notes_plat_sysinfo_410 = From /proc/meminfo notes_plat_sysinfo_415 = MemTotal: 528271804 kB notes_plat_sysinfo_420 = HugePages_Total: 0 notes_plat_sysinfo_425 = Hugepagesize: 2048 kB notes_plat_sysinfo_430 = notes_plat_sysinfo_435 = From /etc/*release* /etc/*version* notes_plat_sysinfo_440 = SuSE-release: notes_plat_sysinfo_445 = SUSE Linux Enterprise Server 12 (x86_64) notes_plat_sysinfo_450 = VERSION = 12 notes_plat_sysinfo_455 = PATCHLEVEL = 3 notes_plat_sysinfo_460 = # This file is deprecated and will be removed in a future service pack or release. notes_plat_sysinfo_465 = # Please check /etc/os-release for details about this release. notes_plat_sysinfo_470 = os-release: notes_plat_sysinfo_475 = NAME="SLES" notes_plat_sysinfo_480 = VERSION="12-SP3" notes_plat_sysinfo_485 = VERSION_ID="12.3" notes_plat_sysinfo_490 = PRETTY_NAME="SUSE Linux Enterprise Server 12 SP3" notes_plat_sysinfo_495 = ID="sles" notes_plat_sysinfo_500 = ANSI_COLOR="0;32" notes_plat_sysinfo_505 = CPE_NAME="cpe:/o:suse:sles:12:sp3" notes_plat_sysinfo_510 = notes_plat_sysinfo_515 = uname -a: notes_plat_sysinfo_520 = Linux linux-pm02 4.4.114-94.11-default #1 SMP Thu Feb 1 19:28:26 UTC 2018 (4309ff9) notes_plat_sysinfo_525 = x86_64 x86_64 x86_64 GNU/Linux notes_plat_sysinfo_530 = notes_plat_sysinfo_535 = Kernel self-reported vulnerability status: notes_plat_sysinfo_540 = notes_plat_sysinfo_545 = CVE-2017-5754 (Meltdown): Not affected notes_plat_sysinfo_550 = CVE-2017-5753 (Spectre variant 1): Mitigation: Barriers notes_plat_sysinfo_555 = CVE-2017-5715 (Spectre variant 2): Mitigation: Full AMD retpoline + IBPB notes_plat_sysinfo_560 = notes_plat_sysinfo_565 = run-level 3 Nov 13 17:58 notes_plat_sysinfo_570 = notes_plat_sysinfo_575 = SPEC is set to: /home/cpu2017 notes_plat_sysinfo_580 = Filesystem Type Size Used Avail Use% Mounted on notes_plat_sysinfo_585 = /dev/sda4 xfs 145G 5.7G 139G 4% /home notes_plat_sysinfo_590 = notes_plat_sysinfo_595 = Additional information from dmidecode follows. WARNING: Use caution when you interpret notes_plat_sysinfo_600 = this section. The 'dmidecode' program reads system data which is "intended to allow notes_plat_sysinfo_605 = hardware to be accurately determined", but the intent may not be met, as there are notes_plat_sysinfo_610 = frequent changes to hardware, firmware, and the "DMTF SMBIOS" standard. notes_plat_sysinfo_615 = BIOS American Megatrends Inc. 1.0 09/04/2018 notes_plat_sysinfo_620 = Memory: notes_plat_sysinfo_625 = 8x NO DIMM NO DIMM notes_plat_sysinfo_630 = 8x Samsung M386A8K40BM2-CTD 64 GB 4 rank 2667 notes_plat_sysinfo_635 = notes_plat_sysinfo_640 = (End of data from sysinfo program) hw_cpu_name = AMD EPYC 7401P hw_disk = 145 GB add more disk info here hw_memory001 = 503.799 GB fixme: If using DDR4, the format is: hw_memory002 = 'N GB (N x N GB nRxn PC4-nnnnX-X)' hw_nchips = 1 prepared_by = root (is never output, only tags rawfile) sw_file = xfs sw_os001 = SUSE Linux Enterprise Server 12 (x86_64) sw_os002 = 4.4.114-94.11-default sw_state = Run level 3 (add definition here) # End of settings added by sysinfo_program # The following section was added automatically, and contains settings that # did not appear in the original configuration file, but were added to the # raw file after the run. 549.fotonik3d_r: # The following setting was inserted automatically as a result of # post-run basepeak application. basepeak = 1 538.imagick_r: # The following setting was inserted automatically as a result of # post-run basepeak application. basepeak = 1 527.cam4_r: # The following setting was inserted automatically as a result of # post-run basepeak application. basepeak = 1 526.blender_r: # The following setting was inserted automatically as a result of # post-run basepeak application. basepeak = 1 521.wrf_r: # The following setting was inserted automatically as a result of # post-run basepeak application. basepeak = 1 507.cactuBSSN_r: # The following setting was inserted automatically as a result of # post-run basepeak application. basepeak = 1 default: notes_000 =Environment variables set by runcpu before the start of the run: notes_005 =LD_LIBRARY_PATH = "/home/cpu2017/amd1704-rate-libs-revD/64;/home/cpu2017/amd1704-rate-libs-revD/32:" notes_010 =MALLOC_CONF = "lg_chunk:28" notes_015 =