# Invocation command line: # /home/cpu2017/bin/harness/runcpu --nobuild --action validate --define default-platform-flags --copies 4 --configfile ic19.0u1-lin-core-avx2-rate-20181112.cfg --define cores=4 --define physicalfirst --define no-numa --tune base,peak --output_format all --define drop_caches --nopower --runmode rate --tune base:peak --size refrate fprate # output_root was not used for this run ############################################################################ #------------------------------------------------------------------------------ # This is a sample SPEC CPU2017 config file. It is applicable for: # # Compiler name/version: Intel(R) C/C++ and Fortran 19.0u1 Compilers for Linux # Operating system version: Redhat Enterprise Linux 7.5, GLIBC 2.17 # Hardware: Intel(R) processors supporting CORE-AVX2 tuning # # If you wish to build your own: # (1) Copy this to a new name # cd %SPEC%/config # copy this.cfg that.cfg # (2) Change items that are marked 'EDIT' (search for it) # # If you have different software or hardware, this config file may not work. # You may find a better config file for your system next to posted results: # http://www.spec.org/cpu2017/results # # Compiler issues: Contact your compiler vendor, not SPEC. # For SPEC help: http://www.spec.org/auto/cpu2017/Docs/techsupport.html #------------------------------------------------------------------------------ #--------- Preprocessor ------------------------------------------------------- # # Optionally edit if you wish: %define build_ncpus 8 # controls number of simultaneous compiles # Used to date the label %define version 20181112 # Used for the optimization tuning part of the label (not required) %if defined(%{noopt}) %define opt_label -noopt %elif defined(%{medopt}) %define opt_label -medopt %else %define opt_label %endif # Used for labeling static linked builds (not required) %if defined(%{static}) %define static_label -static %else %define static_label %endif #--------- Label -------------------------------------------------------------- # Arbitrary string, tags your binaries & directories. # Two Suggestions: # (1) Change this label as you try new ideas. label = ic19.0u1-lin-core-avx2-rate%{opt_label}%{static_label}-%{version} # (2) Make the label meaningful to YOU. #--------- Global Settings ---------------------------------------------------- # For info, see: # https://www.spec.org/auto/cpu2017/Docs/config.html#fieldname XXX # Example: https://www.spec.org/auto/cpu2017/Docs/config.html#tune ######################################################## # ATTENTION ATTENTION ATTENTION ######################################################## # # NOTE If you change fail_build then PLEASE also # change the line 'define version', because # SPEC review tools use 'label' to track binaries. # ######################################################## # # vvvvvvvvvvvv # do not change unless you read NOTE above fail_build=0 # do not change unless you read NOTE above # ^^^^^^^^^^^^ # do not change unless you read NOTE above # ######################################################## # action = validate command_add_redirect = 1 line_width = 1020 log_line_width = 1020 makeflags = -j%{build_ncpus} output_format = txt,cfg,pdf,csv preenv = 1 tune = base bench_post_setup = sync parallel_test = 1 mean_anyway = 1 reportable = 1 copies = 1 #Reference the flags Files flagsurl000=http://www.spec.org/cpu2017/flags/Intel-ic18.0-official-linux64.2019-04-02.xml %ifdef %{default-platform-flags} flagsurl001=http://www.spec.org/cpu2017/flags/Default-Platform-Flags.xml %endif # Set some environment variables intrate: preENV_LD_LIBRARY_PATH = $[top]/lib/ia32:$[top]/lib/intel64:$[top]/je5.0.1-32:$[top]/je5.0.1-64 fprate: preENV_LD_LIBRARY_PATH = $[top]/lib/ia32:$[top]/lib/intel64 # Affinitization # For UP systems, we need to know if the processors are ordered across cores first or in order # If across cores, processors 0, 1, 2 and 3 are on distinct physical cores # Otherwise, processors 0, 2, 4 and 6 are on distinct physical cores default: submit = numactl --localalloc --physcpubind=$SPECCOPYNUM -- $command %ifdef %{no-numa} submit = taskset -c $SPECCOPYNUM $command %endif #--------- Compilers ---------------------------------------------------------- intrate,fprate: CC = icc -m64 -std=c11 CXX = icpc -m64 FC = ifort -m64 default: # How to say "Show me your version, please" CC_VERSION_OPTION = -V CXX_VERSION_OPTION = -V FC_VERSION_OPTION = -V JEMALLOC32_DIR = /usr/local/je5.0.1-32/lib JEMALLOC64_DIR = /usr/local/je5.0.1-64/lib INTEL64_DIR = /usr/local/IntelCompiler19/compilers_and_libraries_2019.1.144/linux/compiler/lib/intel64 %if !defined(%{static}) JEMALLOC32 = jemalloc JEMALLOC64 = jemalloc QKMALLOC = qkmalloc %else JEMALLOC32 = libjemalloc.a JEMALLOC64 = libjemalloc.a %endif #--------- Portability -------------------------------------------------------- intrate,fprate: PORTABILITY= -DSPEC_LP64 500.perlbench_r: CPORTABILITY = -DSPEC_LINUX_X64 521.wrf_r: CPORTABILITY = -DSPEC_CASE_FLAG FPORTABILITY= -convert big_endian 523.xalancbmk_r: CXXPORTABILITY=-DSPEC_LINUX 526.blender_r: CPORTABILITY= -DSPEC_LINUX -funsigned-char 527.cam4_r: CPORTABILITY= -DSPEC_CASE_FLAG #--------- How Many CPUs? ----------------------------------------------------- # Both SPECrate and SPECspeed can test multiple chips / cores / hw threads # - For SPECrate, you set the number of copies. # See: https://www.spec.org/cpu2017/Docs/system-requirements.html#MultipleCPUs # # q. How many should I set? # a. Unknown, you will have to try it and see! # # To get you started, some suggestions: # # copies - This config file defaults to testing only 1 copy. You might # try changing it to match the number of cores on your system, # or perhaps the number of virtual CPUs as reported by: # grep -c processor /proc/cpuinfo # Be sure you have enough memory. See: # https://www.spec.org/cpu2017/Docs/system-requirements.html#memory # default: copies = 1 # EDIT to change number of copies (see above) #-------- Tuning Flags ------------------------------------------------- intspeed,fpspeed: #reconsider using a speed config file instead of a rate config file fail=1 intrate,fprate: SSE = -xCORE-AVX2 EXTRA_FOPTIMIZE = -nostandard-realloc-lhs -align array32byte intrate=default: EXTRA_LIBS = -L$(INTEL64_DIR) -l$(QKMALLOC) EXTRA_LDFLAGS = -Wl,-z,muldefs intrate=base: %if defined(%{noopt}) OPT_ROOT = -O0 %elif defined(%{medopt}) OPT_ROOT = -O2 %else OPT_ROOT = -ipo -O3 -no-prec-div %endif FAST_NO_STATIC = $(SSE) $(OPT_ROOT) FORT_FAST_NO_STATIC = $(SSE) $(OPT_ROOT) FAST = $(SSE) $(OPT_ROOT) -static FORT_FAST = $(SSE) $(OPT_ROOT) -static %if !defined(%{static}) COPTIMIZE = $(FAST_NO_STATIC) -qopt-mem-layout-trans=4 CXXOPTIMIZE = $(FAST_NO_STATIC) -qopt-mem-layout-trans=4 FOPTIMIZE = $(FORT_FAST_NO_STATIC) -qopt-mem-layout-trans=4 %if defined(%{noopt}) COPTIMIZE = $(OPT_ROOT) CXXOPTIMIZE = $(OPT_ROOT) FOPTIMIZE = $(OPT_ROOT) %endif %else COPTIMIZE = $(FAST) -qopt-mem-layout-trans=4 CXXOPTIMIZE = $(FAST) -qopt-mem-layout-trans=4 FOPTIMIZE = $(FORT_FAST) -qopt-mem-layout-trans=4 %if defined(%{noopt}) COPTIMIZE = $(OPT_ROOT) -static CXXOPTIMIZE = $(OPT_ROOT) -static FOPTIMIZE = $(OPT_ROOT) -static %endif %endif fprate=base: %if defined(%{noopt}) OPT_ROOT = -O0 %elif defined(%{medopt}) OPT_ROOT = -O2 %else OPT_ROOT = -ipo -O3 -no-prec-div %endif FAST_NO_STATIC = $(SSE) $(OPT_ROOT) FORT_FAST_NO_STATIC = $(SSE) $(OPT_ROOT) FAST = $(SSE) $(OPT_ROOT) -static FORT_FAST = $(SSE) $(OPT_ROOT) -static %if !defined(%{static}) COPTIMIZE = $(FAST_NO_STATIC) -qopt-prefetch -ffinite-math-only -qopt-mem-layout-trans=4 CXXOPTIMIZE = $(FAST_NO_STATIC) -qopt-prefetch -ffinite-math-only -qopt-mem-layout-trans=4 FOPTIMIZE = $(FORT_FAST_NO_STATIC) -qopt-prefetch -ffinite-math-only -qopt-mem-layout-trans=4 -auto %if defined(%{noopt}) COPTIMIZE = $(OPT_ROOT) CXXOPTIMIZE = $(OPT_ROOT) FOPTIMIZE = $(OPT_ROOT) %endif %else COPTIMIZE = $(FAST) -qopt-prefetch -ffinite-math-only -qopt-mem-layout-trans=4 CXXOPTIMIZE = $(FAST) -qopt-prefetch -ffinite-math-only -qopt-mem-layout-trans=4 FOPTIMIZE = $(FORT_FAST) -qopt-prefetch -ffinite-math-only -qopt-mem-layout-trans=4 -auto %if defined(%{noopt}) COPTIMIZE = $(OPT_ROOT) -static CXXOPTIMIZE = $(OPT_ROOT) -static FOPTIMIZE = $(OPT_ROOT) -static %endif %endif intrate=peak: %if defined(%{noopt}) || defined(%{medopt}) #not building or executing peak against less opt fail=1 %endif PASS1_CFLAGS = -prof-gen PASS2_CFLAGS = -prof-use PASS1_FFLAGS = -prof-gen PASS2_FFLAGS = -prof-use PASS1_CXXFLAGS = -prof-gen PASS2_CXXFLAGS = -prof-use PASS1_LDFLAGS = -prof-gen PASS2_LDFLAGS = -prof-use OPT_ROOT = -ipo -O3 -no-prec-div FAST_NO_STATIC_PASS1 = $(OPT_ROOT) FORT_FAST_NO_STATIC_PASS1 = $(OPT_ROOT) FAST_PASS1 = $(OPT_ROOT) -static FORT_FAST_PASS1 = $(OPT_ROOT) -static FAST_NO_STATIC_PASS2 = $(SSE) $(OPT_ROOT) FORT_FAST_NO_STATIC_PASS2 = $(SSE) $(OPT_ROOT) FAST_PASS2 = $(SSE) $(OPT_ROOT) -static FORT_FAST_PASS2 = $(SSE) $(OPT_ROOT) -static %if !defined(%{static}) PASS1_COPTIMIZE = $(FAST_NO_STATIC_PASS1) -qopt-mem-layout-trans=4 PASS1_CXXOPTIMIZE = $(FAST_NO_STATIC_PASS1) -qopt-mem-layout-trans=4 PASS1_FOPTIMIZE = $(FORT_FAST_NO_STATIC_PASS1) -qopt-mem-layout-trans=4 PASS2_COPTIMIZE = $(FAST_NO_STATIC_PASS2) -qopt-mem-layout-trans=4 PASS2_CXXOPTIMIZE = $(FAST_NO_STATIC_PASS2) -qopt-mem-layout-trans=4 PASS2_FOPTIMIZE = $(FORT_FAST_NO_STATIC_PASS2) -qopt-mem-layout-trans=4 %else PASS1_COPTIMIZE = $(FAST_PASS1) -qopt-mem-layout-trans=4 PASS1_CXXOPTIMIZE = $(FAST_PASS1) -qopt-mem-layout-trans=4 PASS1_FOPTIMIZE = $(FORT_FAST_PASS1) -qopt-mem-layout-trans=4 PASS2_COPTIMIZE = $(FAST_PASS2) -qopt-mem-layout-trans=4 PASS2_CXXOPTIMIZE = $(FAST_PASS2) -qopt-mem-layout-trans=4 PASS2_FOPTIMIZE = $(FORT_FAST_PASS2) -qopt-mem-layout-trans=4 %endif fprate=peak: %if defined(%{noopt}) || defined(%{medopt}) #not building or executing peak against less opt fail=1 %endif PASS1_CFLAGS = -prof-gen PASS2_CFLAGS = -prof-use PASS1_FFLAGS = -prof-gen PASS2_FFLAGS = -prof-use PASS1_CXXFLAGS = -prof-gen PASS2_CXXFLAGS = -prof-use PASS1_LDFLAGS = -prof-gen PASS2_LDFLAGS = -prof-use OPT_ROOT = -ipo -O3 -no-prec-div FAST_NO_STATIC_PASS1 = $(OPT_ROOT) FORT_FAST_NO_STATIC_PASS1 = $(OPT_ROOT) FAST_PASS1 = $(OPT_ROOT) -static FORT_FAST_PASS1 = $(OPT_ROOT) -static FAST_NO_STATIC_PASS2 = $(SSE) $(OPT_ROOT) FORT_FAST_NO_STATIC_PASS2 = $(SSE) $(OPT_ROOT) FAST_PASS2 = $(SSE) $(OPT_ROOT) -static FORT_FAST_PASS2 = $(SSE) $(OPT_ROOT) -static %if !defined(%{static}) PASS1_COPTIMIZE = $(FAST_NO_STATIC_PASS1) -qopt-prefetch -ffinite-math-only -qopt-mem-layout-trans=4 PASS1_CXXOPTIMIZE = $(FAST_NO_STATIC_PASS1) -qopt-prefetch -ffinite-math-only -qopt-mem-layout-trans=4 PASS1_FOPTIMIZE = $(FORT_FAST_NO_STATIC_PASS1) -qopt-prefetch -ffinite-math-only -qopt-mem-layout-trans=4 PASS2_COPTIMIZE = $(FAST_NO_STATIC_PASS2) -qopt-prefetch -ffinite-math-only -qopt-mem-layout-trans=4 PASS2_CXXOPTIMIZE = $(FAST_NO_STATIC_PASS2) -qopt-prefetch -ffinite-math-only -qopt-mem-layout-trans=4 PASS2_FOPTIMIZE = $(FORT_FAST_NO_STATIC_PASS2) -qopt-prefetch -ffinite-math-only -qopt-mem-layout-trans=4 -auto %else PASS1_COPTIMIZE = $(FAST_PASS1) -qopt-prefetch -ffinite-math-only -qopt-mem-layout-trans=4 PASS1_CXXOPTIMIZE = $(FAST_PASS1) -qopt-prefetch -ffinite-math-only -qopt-mem-layout-trans=4 PASS1_FOPTIMIZE = $(FORT_FAST_PASS1) -qopt-prefetch -ffinite-math-only -qopt-mem-layout-trans=4 PASS2_COPTIMIZE = $(FAST_PASS2) -qopt-prefetch -ffinite-math-only -qopt-mem-layout-trans=4 PASS2_CXXOPTIMIZE = $(FAST_PASS2) -qopt-prefetch -ffinite-math-only -qopt-mem-layout-trans=4 PASS2_FOPTIMIZE = $(FORT_FAST_PASS2) -qopt-prefetch -ffinite-math-only -qopt-mem-layout-trans=4 -auto %endif #some benchmarks do not want to share a core %ifdef %{smt-on} %define numpeakcopies %{cores} 510.parest_r,521.wrf_r,554.roms_r=peak: copies = %{numpeakcopies} %endif 500.perlbench_r=peak=default: #[56]00.perlbench[rs] has non standard signed overflow EXTRA_OPTIMIZE = -fno-strict-overflow 525.x264_r=peak: EXTRA_OPTIMIZE = -fno-alias 502.gcc_r,523.xalancbmk_r=peak: CC = icc -m32 -std=c11 -L/usr/local/IntelCompiler19/compilers_and_libraries_2019.1.144/linux/compiler/lib/ia32_lin CXX = icpc -m32 -L/usr/local/IntelCompiler19/compilers_and_libraries_2019.1.144/linux/compiler/lib/ia32_lin FC = ifort -m32 -L/usr/local/IntelCompiler19/compilers_and_libraries_2019.1.144/linux/compiler/lib/ia32_lin EXTRA_LIBS = -L$(JEMALLOC32_DIR) -l$(JEMALLOC32) EXTRA_LDFLAGS = -Wl,-z,muldefs #Change portability for 32b, large file support for safety PORTABILITY = -D_FILE_OFFSET_BITS=64 #int rate subset for removing FDO 505.mcf_r,557.xz_r,520.omnetpp_r,548.exchange2_r,531.deepsjeng_r,541.leela_r,525.x264_r=peak: feedback = 0 OPT_ROOT = -ipo -O3 -no-prec-div FAST_NO_STATIC = $(SSE) $(OPT_ROOT) FORT_FAST_NO_STATIC = $(SSE) $(OPT_ROOT) FAST = $(SSE) $(OPT_ROOT) -static FORT_FAST = $(SSE) $(OPT_ROOT) -static %if !defined(%{static}) COPTIMIZE = $(FAST_NO_STATIC) -qopt-mem-layout-trans=4 CXXOPTIMIZE = $(FAST_NO_STATIC) -qopt-mem-layout-trans=4 FOPTIMIZE = $(FORT_FAST_NO_STATIC) -qopt-mem-layout-trans=4 %else COPTIMIZE = $(FAST) -qopt-mem-layout-trans=4 CXXOPTIMIZE = $(FAST) -qopt-mem-layout-trans=4 FOPTIMIZE = $(FORT_FAST) -qopt-mem-layout-trans=4 %endif #fp rate subset for removing FDO 503.bwaves_r,507.cactuBSSN_r,510.parest_r,526.blender_r,538.imagick_r,544.nab_r,549.fotonik3d_r=peak=default: feedback = 0 OPT_ROOT = -ipo -O3 -no-prec-div FAST_NO_STATIC = $(SSE) $(OPT_ROOT) FORT_FAST_NO_STATIC = $(SSE) $(OPT_ROOT) FAST = $(SSE) $(OPT_ROOT) -static FORT_FAST = $(SSE) $(OPT_ROOT) -static %if !defined(%{static}) COPTIMIZE = $(FAST_NO_STATIC) -qopt-prefetch -ffinite-math-only -qopt-mem-layout-trans=4 CXXOPTIMIZE = $(FAST_NO_STATIC) -qopt-prefetch -ffinite-math-only -qopt-mem-layout-trans=4 FOPTIMIZE = $(FORT_FAST_NO_STATIC) -qopt-prefetch -ffinite-math-only -qopt-mem-layout-trans=4 -auto %if defined(%{noopt}) COPTIMIZE = $(OPT_ROOT) CXXOPTIMIZE = $(OPT_ROOT) FOPTIMIZE = $(OPT_ROOT) %endif %else COPTIMIZE = $(FAST) -qopt-prefetch -ffinite-math-only -qopt-mem-layout-trans=4 CXXOPTIMIZE = $(FAST) -qopt-prefetch -ffinite-math-only -qopt-mem-layout-trans=4 FOPTIMIZE = $(FORT_FAST) -qopt-prefetch -ffinite-math-only -qopt-mem-layout-trans=4 -auto %if defined(%{noopt}) COPTIMIZE = $(OPT_ROOT) -static CXXOPTIMIZE = $(OPT_ROOT) -static FOPTIMIZE = $(OPT_ROOT) -static %endif %endif #------------------------------------------------------------------------------- # Tester and System Descriptions - EDIT the sections below #------------------------------------------------------------------------------- # For info about any field, see # https://www.spec.org/auto/cpu2017/Docs/config.html#fieldname # Example: https://www.spec.org/auto/cpu2017/Docs/config.html#hw_memory #------------------------------------------------------------------------------- #--------- If you install new compilers, EDIT this section -------------------- intrate,intspeed,fpspeed,fprate: sw_compiler000 = C/C++: Version 19.0.1.144 of Intel C/C++ sw_compiler001 = Compiler for Linux; sw_compiler002 = Fortran: Version 19.0.1.144 of Intel Fortran sw_compiler003 = Compiler for Linux sw_base_ptrsize = 64-bit fprate,fpspeed: sw_peak_ptrsize = 64-bit sw_other = None intrate,intspeed: sw_peak_ptrsize = 32/64-bit sw_other001 = jemalloc memory allocator V5.0.1 #--------- EDIT Your info --------------------------------------------------------- # To understand the difference between hw_vendor/sponsor/tester, see: # www.spec.org/auto/cpu2017/Docs/config.html#test_sponsor intrate,intspeed,fprate,fpspeed: # Important: keep this line hw_vendor = Supermicro tester = Supermicro test_sponsor = Supermicro license_num = 001176 prepared_by = Supermicro #--------- EDIT system availability dates and system information ---------------------------------------------- intrate,intspeed,fprate,fpspeed: # Important: keep this line # Example # Brief info about field hw_avail = Nov-2018 # Nov-2099 # Date of LAST hardware component to ship sw_avail = Nov-2018 # Nov-2099 # Date of LAST software component to ship hw_cpu_nominal_mhz = 3600 # 9999 # Nominal chip frequency, in MHz hw_cpu_max_mhz = 3600 # 9999 # Max chip frequency, in MHz hw_ncores = 4 # 9999 # number cores enabled hw_nthreadspercore = 1 # 9 # number threads enabled per core hw_ncpuorder = 1 chip # 1-9 chips # Ordering options hw_model000 = SuperServer 5019C-WR (X11SCW-F , Intel Core hw_model001 = i3-8100) hw_other = None # TurboNUMA Router 10 Gb # Other perf-relevant hw, or "None" # sw_other = # TurboHeap Library V8.1 # Other perf-relevant sw, or "None" hw_pcache = 32 KB I + 32 KB D on chip per core # Primary cache size, type, location hw_scache = 256 KB I+D on chip per core # Second cache or "None" hw_tcache = 6 MB I+D on chip per chip # Third cache or "None" hw_ocache = None # Other cache or "None" hw_memory000 = 64 GB (4 x 16 GB 2Rx8 PC4-2666V-E, # N GB (M x N GB nRxn hw_memory001 = running at 2400) # PCn-nnnnnR-n[, ECC and other info]) #--------- Sysinfo fields - You may need to adjust this section --------------- # Note: Some commented-out fields above are automatically set to preliminary # values by sysinfo # www.spec.org/auto/cpu2017/Docs/config.html#sysinfo # Uncomment lines for which you already have a better answer than sysinfo # intrate,intspeed,fprate,fpspeed: # Important: keep this line # Brief info about field hw_cpu_name = Intel Core i3-8100 # chip name hw_disk = 1 x 200 GB SATA III SSD # Size, type, other perf-relevant info hw_nchips = 1 # number chips enabled sw_file = xfs # File system sw_state = Run level 3 (multi-user) # Software state. fw_bios = Version 1.0b released May-2019 sw_os000 = SUSE Linux Enterprise Server 12 SP3 (x86_64) # Operating system sw_os001 = Kernel 4.4.114-94.11-default # and version #--------- EDIT Intel Recommended Fields - You may wish to adjust this section ----- default: notes_015 = Binaries compiled on a system with 1x Intel Core i9-7900X CPU + 32GB RAM notes_020 = memory using Redhat Enterprise Linux 7.5 intrate: notes_jemalloc_003 = jemalloc, a general purpose malloc implementation notes_jemalloc_004 = built with the RedHat Enterprise 7.5, and the system compiler gcc 4.8.5 notes_jemalloc_005 = sources available from jemalloc.net or https://github.com/jemalloc/jemalloc/releases default: notes_os_000 = Stack size set to unlimited using "ulimit -s unlimited" #Ease of tagging results from the runcpu command line with commands run outside of runcpu harneess #Adjust as necessary for your SUT %if defined(%{THP_enabled}) notes_200 = Transparent Huge Pages enabled with: notes_201 = echo always > /sys/kernel/mm/transparent_hugepage/enabled %elif defined(%{THP_disabled}) notes_200 = Transparent Huge Pages disabled with: notes_201 = echo never > /sys/kernel/mm/transparent_hugepage/enabled %else notes_025 = Transparent Huge Pages enabled by default %endif %ifdef %{drop_caches} notes_030 = Prior to runcpu invocation notes_035 = Filesystem page cache synced and cleared with: notes_040 = sync; echo 3> /proc/sys/vm/drop_caches %endif %ifdef %{invoke_with_interleave} notes_205 = runcpu command invoked through numactl i.e.: notes_206 = numactl --interleave=all runcpu %endif intrate,fprate: %if defined(%{no-numa}) notes_submit_000 = The taskset mechanism was used to bind copies to processors. The config file option 'submit' notes_submit_005 = was used to generate taskset commands to bind each copy to a specific processor. notes_submit_010 = For details, please see the config file. %else notes_submit_000 = The numactl mechanism was used to bind copies to processors. The config file option 'submit' notes_submit_001 = was used to generate numactl commands to bind each copy to a specific processor. notes_submit_002 = For details, please see the config file. %endif notes_045 = notes_050 = Yes: The test sponsor attests, as of date of publication, that CVE-2017-5754 (Meltdown) notes_055 = is mitigated in the system as tested and documented. notes_060 = Yes: The test sponsor attests, as of date of publication, that CVE-2017-5753 (Spectre variant 1) notes_065 = is mitigated in the system as tested and documented. notes_070 = Yes: The test sponsor attests, as of date of publication, that CVE-2017-5715 (Spectre variant 2) notes_075 = is mitigated in the system as tested and documented. # notes_plat_000 = BIOS Settings: # notes_plat_001 = Monitor/Mwait = Disable # notes_plat_002 = LLC prefetch = Disable # notes_plat_003 = Power Technology = Custom # notes_plat_004 = Power Performance Tuning = BIOS Controls EPB # notes_plat_005 = ENERGY_PERF_BIAS_CFG mode = Extreme Performance # notes_plat_006 = Hardware P-state = Out of Band Mode # notes_plat_007 = SNC = Enable # notes_plat_008 = XPT Prefetch = Disable # notes_plat_009 = Stale AtoS = Disable # notes_plat_010 = LLC dead line alloc = Enable # notes_plat_011 = IMC Interleaving = 1-way Interleave # notes_plat_012 = SDDC Plus One = Disable # notes_plat_013 = ADDDC Sparing = Disable # notes_plat_014 = Patrol Scrub = Disable # notes_plat_015 = Hyper-Threading [ALL] = Disable # The following settings were obtained by running the sysinfo_program # 'specperl $[top]/bin/sysinfo' (sysinfo:SHA:32259ebd59f3e93740723202f27c44c82ee68e0f2e40cd2ca50cfd5519772397) default: notes_plat_sysinfo_000 = Sysinfo program /home/cpu2017/bin/sysinfo notes_plat_sysinfo_005 = Rev: r5974 of 2018-05-19 9bcde8f2999c33d61f64985e45859ea9 notes_plat_sysinfo_010 = running on linux-65nv Fri Sep 6 22:45:10 2019 notes_plat_sysinfo_015 = notes_plat_sysinfo_020 = SUT (System Under Test) info as seen by some common utilities. notes_plat_sysinfo_025 = For more information on this section, see notes_plat_sysinfo_030 = https://www.spec.org/cpu2017/Docs/config.html#sysinfo notes_plat_sysinfo_035 = notes_plat_sysinfo_040 = From /proc/cpuinfo notes_plat_sysinfo_045 = model name : Intel(R) Core(TM) i3-8100 CPU @ 3.60GHz notes_plat_sysinfo_050 = 1 "physical id"s (chips) notes_plat_sysinfo_055 = 4 "processors" notes_plat_sysinfo_060 = cores, siblings (Caution: counting these is hw and system dependent. The following notes_plat_sysinfo_065 = excerpts from /proc/cpuinfo might not be reliable. Use with caution.) notes_plat_sysinfo_070 = cpu cores : 4 notes_plat_sysinfo_075 = siblings : 4 notes_plat_sysinfo_080 = physical 0: cores 0 1 2 3 notes_plat_sysinfo_085 = notes_plat_sysinfo_090 = From lscpu: notes_plat_sysinfo_095 = Architecture: x86_64 notes_plat_sysinfo_100 = CPU op-mode(s): 32-bit, 64-bit notes_plat_sysinfo_105 = Byte Order: Little Endian notes_plat_sysinfo_110 = CPU(s): 4 notes_plat_sysinfo_115 = On-line CPU(s) list: 0-3 notes_plat_sysinfo_120 = Thread(s) per core: 1 notes_plat_sysinfo_125 = Core(s) per socket: 4 notes_plat_sysinfo_130 = Socket(s): 1 notes_plat_sysinfo_135 = NUMA node(s): 1 notes_plat_sysinfo_140 = Vendor ID: GenuineIntel notes_plat_sysinfo_145 = CPU family: 6 notes_plat_sysinfo_150 = Model: 158 notes_plat_sysinfo_155 = Model name: Intel(R) Core(TM) i3-8100 CPU @ 3.60GHz notes_plat_sysinfo_160 = Stepping: 11 notes_plat_sysinfo_165 = CPU MHz: 3600.069 notes_plat_sysinfo_170 = CPU max MHz: 3600.0000 notes_plat_sysinfo_175 = CPU min MHz: 800.0000 notes_plat_sysinfo_180 = BogoMIPS: 7199.99 notes_plat_sysinfo_185 = Virtualization: VT-x notes_plat_sysinfo_190 = L1d cache: 32K notes_plat_sysinfo_195 = L1i cache: 32K notes_plat_sysinfo_200 = L2 cache: 256K notes_plat_sysinfo_205 = L3 cache: 6144K notes_plat_sysinfo_210 = NUMA node0 CPU(s): 0-3 notes_plat_sysinfo_215 = Flags: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov notes_plat_sysinfo_220 = pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx pdpe1gb rdtscp notes_plat_sysinfo_225 = lm constant_tsc art arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc notes_plat_sysinfo_230 = aperfmperf eagerfpu pni pclmulqdq dtes64 monitor ds_cpl vmx est tm2 ssse3 sdbg fma notes_plat_sysinfo_235 = cx16 xtpr pdcm pcid sse4_1 sse4_2 x2apic movbe popcnt tsc_deadline_timer aes xsave notes_plat_sysinfo_240 = avx f16c rdrand lahf_lm abm 3dnowprefetch arat epb invpcid_single pln pts dtherm hwp notes_plat_sysinfo_245 = hwp_notify hwp_act_window hwp_epp intel_pt rsb_ctxsw spec_ctrl retpoline kaiser notes_plat_sysinfo_250 = tpr_shadow vnmi flexpriority ept vpid fsgsbase tsc_adjust bmi1 avx2 smep bmi2 erms notes_plat_sysinfo_255 = invpcid mpx rdseed adx smap clflushopt xsaveopt xsavec xgetbv1 notes_plat_sysinfo_260 = notes_plat_sysinfo_265 = /proc/cpuinfo cache data notes_plat_sysinfo_270 = cache size : 6144 KB notes_plat_sysinfo_275 = notes_plat_sysinfo_280 = From numactl --hardware WARNING: a numactl 'node' might or might not correspond to a notes_plat_sysinfo_285 = physical chip. notes_plat_sysinfo_290 = available: 1 nodes (0) notes_plat_sysinfo_295 = node 0 cpus: 0 1 2 3 notes_plat_sysinfo_300 = node 0 size: 64332 MB notes_plat_sysinfo_305 = node 0 free: 55528 MB notes_plat_sysinfo_310 = node distances: notes_plat_sysinfo_315 = node 0 notes_plat_sysinfo_320 = 0: 10 notes_plat_sysinfo_325 = notes_plat_sysinfo_330 = From /proc/meminfo notes_plat_sysinfo_335 = MemTotal: 65876956 kB notes_plat_sysinfo_340 = HugePages_Total: 0 notes_plat_sysinfo_345 = Hugepagesize: 2048 kB notes_plat_sysinfo_350 = notes_plat_sysinfo_355 = From /etc/*release* /etc/*version* notes_plat_sysinfo_360 = SuSE-release: notes_plat_sysinfo_365 = SUSE Linux Enterprise Server 12 (x86_64) notes_plat_sysinfo_370 = VERSION = 12 notes_plat_sysinfo_375 = PATCHLEVEL = 3 notes_plat_sysinfo_380 = # This file is deprecated and will be removed in a future service pack or release. notes_plat_sysinfo_385 = # Please check /etc/os-release for details about this release. notes_plat_sysinfo_390 = os-release: notes_plat_sysinfo_395 = NAME="SLES" notes_plat_sysinfo_400 = VERSION="12-SP3" notes_plat_sysinfo_405 = VERSION_ID="12.3" notes_plat_sysinfo_410 = PRETTY_NAME="SUSE Linux Enterprise Server 12 SP3" notes_plat_sysinfo_415 = ID="sles" notes_plat_sysinfo_420 = ANSI_COLOR="0;32" notes_plat_sysinfo_425 = CPE_NAME="cpe:/o:suse:sles:12:sp3" notes_plat_sysinfo_430 = notes_plat_sysinfo_435 = uname -a: notes_plat_sysinfo_440 = Linux linux-65nv 4.4.114-94.11-default #1 SMP Thu Feb 1 19:28:26 UTC 2018 (4309ff9) notes_plat_sysinfo_445 = x86_64 x86_64 x86_64 GNU/Linux notes_plat_sysinfo_450 = notes_plat_sysinfo_455 = Kernel self-reported vulnerability status: notes_plat_sysinfo_460 = notes_plat_sysinfo_465 = CVE-2017-5754 (Meltdown): Mitigation: PTI notes_plat_sysinfo_470 = CVE-2017-5753 (Spectre variant 1): Mitigation: Barriers notes_plat_sysinfo_475 = CVE-2017-5715 (Spectre variant 2): Mitigation: IBRS+IBPB notes_plat_sysinfo_480 = notes_plat_sysinfo_485 = run-level 3 Sep 6 18:10 notes_plat_sysinfo_490 = notes_plat_sysinfo_495 = SPEC is set to: /home/cpu2017 notes_plat_sysinfo_500 = Filesystem Type Size Used Avail Use% Mounted on notes_plat_sysinfo_505 = /dev/sda3 xfs 145G 21G 124G 15% /home notes_plat_sysinfo_510 = notes_plat_sysinfo_515 = Additional information from dmidecode follows. WARNING: Use caution when you interpret notes_plat_sysinfo_520 = this section. The 'dmidecode' program reads system data which is "intended to allow notes_plat_sysinfo_525 = hardware to be accurately determined", but the intent may not be met, as there are notes_plat_sysinfo_530 = frequent changes to hardware, firmware, and the "DMTF SMBIOS" standard. notes_plat_sysinfo_535 = BIOS American Megatrends Inc. 1.0b 05/16/2019 notes_plat_sysinfo_540 = Memory: notes_plat_sysinfo_545 = 4x Micron 18ADF2G72AZ-2G6H1R 16 GB 2 rank 2667, configured at 2400 notes_plat_sysinfo_550 = notes_plat_sysinfo_555 = (End of data from sysinfo program) hw_cpu_name = Intel Core i3-8100 hw_disk = 145 GB add more disk info here hw_memory001 = 62.825 GB fixme: If using DDR4, the format is: hw_memory002 = 'N GB (N x N GB nRxn PC4-nnnnX-X)' hw_nchips = 1 prepared_by = root (is never output, only tags rawfile) sw_file = xfs sw_os001 = SUSE Linux Enterprise Server 12 (x86_64) sw_os002 = 4.4.114-94.11-default sw_state = Run level 3 (add definition here) # End of settings added by sysinfo_program # The following section was added automatically, and contains settings that # did not appear in the original configuration file, but were added to the # raw file after the run. 510.parest_r: # The following setting was inserted automatically as a result of # post-run basepeak application. basepeak = 1 503.bwaves_r: # The following setting was inserted automatically as a result of # post-run basepeak application. basepeak = 1 default: notes_000 =Environment variables set by runcpu before the start of the run: notes_005 =LD_LIBRARY_PATH = "/home/cpu2017/lib/intel64" notes_010 =