# Invocation command line: # /home/cpu2017/bin/harness/runcpu --define default-platform-flags --copies 224 --configfile ic19.0u4-lin-core-avx2-rate-20190416.cfg --define smt-on --define cores=112 --define physicalfirst --define invoke_with_interleave --define drop_caches --tune base,peak --output_format all --nopower --runmode rate --tune base:peak --size refrate fprate # output_root was not used for this run ############################################################################ #------------------------------------------------------------------------------ # This is a sample SPEC CPU2017 config file. It is applicable for: # # Compiler name/version: Intel(R) C/C++ and Fortran 19.0u4 Compilers for Linux # Operating system version: Redhat Enterprise Linux 7.5, GLIBC 2.17 # Hardware: Intel(R) processors supporting CORE-AVX2 tuning # # If you wish to build your own: # (1) Copy this to a new name # cd %SPEC%/config # copy this.cfg that.cfg # (2) Change items that are marked 'EDIT' (search for it) # # If you have different software or hardware, this config file may not work. # You may find a better config file for your system next to posted results: # http://www.spec.org/cpu2017/results # # Compiler issues: Contact your compiler vendor, not SPEC. # For SPEC help: http://www.spec.org/auto/cpu2017/Docs/techsupport.html #------------------------------------------------------------------------------ #--------- Preprocessor ------------------------------------------------------- # # Optionally edit if you wish: %define build_ncpus 8 # controls number of simultaneous compiles # Used to date the label %define version 20190416 # Used for the optimization tuning part of the label (not required) %if defined(%{noopt}) %define opt_label -noopt %elif defined(%{medopt}) %define opt_label -medopt %else %define opt_label %endif # Used for labeling static linked builds (not required) %if defined(%{static}) %define static_label -static %else %define static_label %endif #--------- Label -------------------------------------------------------------- # Arbitrary string, tags your binaries & directories. # Two Suggestions: # (1) Change this label as you try new ideas. label = ic19.0u4-lin-core-avx2-rate%{opt_label}%{static_label}-%{version} # (2) Make the label meaningful to YOU. #--------- Global Settings ---------------------------------------------------- # For info, see: # https://www.spec.org/auto/cpu2017/Docs/config.html#fieldname XXX # Example: https://www.spec.org/auto/cpu2017/Docs/config.html#tune ######################################################## # ATTENTION ATTENTION ATTENTION ######################################################## # # NOTE If you change fail_build then PLEASE also # change the line 'define version', because # SPEC review tools use 'label' to track binaries. # ######################################################## # # vvvvvvvvvvvv # do not change unless you read NOTE above fail_build=0 # do not change unless you read NOTE above # ^^^^^^^^^^^^ # do not change unless you read NOTE above # ######################################################## # action = validate command_add_redirect = 1 line_width = 1020 log_line_width = 1020 makeflags = -j%{build_ncpus} output_format = txt,cfg,pdf,csv preenv = 1 tune = base bench_post_setup = sync parallel_test = 1 mean_anyway = 1 reportable = 1 copies = 1 #Reference the flags Files flagsurl000=http://www.spec.org/cpu2017/flags/Intel-ic19.0u1-official-linux64.2019-07-09.xml %ifdef %{default-platform-flags} flagsurl001=http://www.spec.org/cpu2017/flags/Dell-Platform-Flags-PowerEdge-revE6.xml %endif # Set some environment variables intrate: preENV_LD_LIBRARY_PATH = $[top]/lib/intel64:$[top]/lib/ia32:$[top]/je5.0.1-32 fprate: preENV_LD_LIBRARY_PATH = $[top]/lib/intel64 # Affinitization # For UP systems, we need to know if the processors are ordered across cores first or in order # If across cores, processors 0, 1, 2 and 3 are on distinct physical cores # Otherwise, processors 0, 2, 4 and 6 are on distinct physical cores default: submit = numactl --localalloc --physcpubind=$SPECCOPYNUM -- $command %ifdef %{no-numa} submit = taskset -c $SPECCOPYNUM $command %endif #--------- Compilers ---------------------------------------------------------- intrate,fprate: CC = icc -m64 -std=c11 CXX = icpc -m64 FC = ifort -m64 default: # How to say "Show me your version, please" CC_VERSION_OPTION = -V CXX_VERSION_OPTION = -V FC_VERSION_OPTION = -V JEMALLOC32_DIR = /usr/local/je5.0.1-32/lib JEMALLOC64_DIR = /usr/local/je5.0.1-64/lib INTEL64_DIR = /usr/local/IntelCompiler19/compilers_and_libraries_2019.4.227/linux/compiler/lib/intel64 %if !defined(%{static}) JEMALLOC32 = jemalloc JEMALLOC64 = jemalloc QKMALLOC = qkmalloc %else JEMALLOC32 = libjemalloc.a JEMALLOC64 = libjemalloc.a %endif #--------- Portability -------------------------------------------------------- intrate,fprate: PORTABILITY= -DSPEC_LP64 500.perlbench_r: CPORTABILITY = -DSPEC_LINUX_X64 521.wrf_r: CPORTABILITY = -DSPEC_CASE_FLAG FPORTABILITY= -convert big_endian 523.xalancbmk_r: CXXPORTABILITY=-DSPEC_LINUX 526.blender_r: CPORTABILITY= -DSPEC_LINUX -funsigned-char 527.cam4_r: CPORTABILITY= -DSPEC_CASE_FLAG #--------- How Many CPUs? ----------------------------------------------------- # Both SPECrate and SPECspeed can test multiple chips / cores / hw threads # - For SPECrate, you set the number of copies. # See: https://www.spec.org/cpu2017/Docs/system-requirements.html#MultipleCPUs # # q. How many should I set? # a. Unknown, you will have to try it and see! # # To get you started, some suggestions: # # copies - This config file, if numcopies not defined or copies are not specified, # defaults to testing only 1 copy. You might # try changing it to match the number of cores on your system, # or perhaps the number of virtual CPUs as reported by: # grep -c processor /proc/cpuinfo # Be sure you have enough memory. See: # https://www.spec.org/cpu2017/Docs/system-requirements.html#memory # default: %if defined (%{numcopies}) copies = %{numcopies} %else copies = 1 # EDIT to change number of copies (see above) %endif #-------- Tuning Flags ------------------------------------------------- intspeed,fpspeed: #reconsider using a speed config file instead of a rate config file fail=1 intrate,fprate: SSE = -xCORE-AVX2 EXTRA_FOPTIMIZE = -nostandard-realloc-lhs -align array32byte intrate=default: EXTRA_LIBS = -L$(INTEL64_DIR) -l$(QKMALLOC) EXTRA_LDFLAGS = -Wl,-z,muldefs intrate=base: %if defined(%{noopt}) OPT_ROOT = -O0 %elif defined(%{medopt}) OPT_ROOT = -O2 %else OPT_ROOT = -ipo -O3 -no-prec-div %endif FAST_NO_STATIC = $(SSE) $(OPT_ROOT) FORT_FAST_NO_STATIC = $(SSE) $(OPT_ROOT) FAST = $(SSE) $(OPT_ROOT) -static FORT_FAST = $(SSE) $(OPT_ROOT) -static %if !defined(%{static}) COPTIMIZE = $(FAST_NO_STATIC) -qopt-mem-layout-trans=4 CXXOPTIMIZE = $(FAST_NO_STATIC) -qopt-mem-layout-trans=4 FOPTIMIZE = $(FORT_FAST_NO_STATIC) -qopt-mem-layout-trans=4 %if defined(%{noopt}) COPTIMIZE = $(OPT_ROOT) CXXOPTIMIZE = $(OPT_ROOT) FOPTIMIZE = $(OPT_ROOT) %endif %else COPTIMIZE = $(FAST) -qopt-mem-layout-trans=4 CXXOPTIMIZE = $(FAST) -qopt-mem-layout-trans=4 FOPTIMIZE = $(FORT_FAST) -qopt-mem-layout-trans=4 %if defined(%{noopt}) COPTIMIZE = $(OPT_ROOT) -static CXXOPTIMIZE = $(OPT_ROOT) -static FOPTIMIZE = $(OPT_ROOT) -static %endif %endif fprate=base: %if defined(%{noopt}) OPT_ROOT = -O0 %elif defined(%{medopt}) OPT_ROOT = -O2 %else OPT_ROOT = -ipo -O3 -no-prec-div %endif FAST_NO_STATIC = $(SSE) $(OPT_ROOT) FORT_FAST_NO_STATIC = $(SSE) $(OPT_ROOT) FAST = $(SSE) $(OPT_ROOT) -static FORT_FAST = $(SSE) $(OPT_ROOT) -static %if !defined(%{static}) COPTIMIZE = $(FAST_NO_STATIC) -qopt-prefetch -ffinite-math-only -qopt-mem-layout-trans=4 CXXOPTIMIZE = $(FAST_NO_STATIC) -qopt-prefetch -ffinite-math-only -qopt-mem-layout-trans=4 FOPTIMIZE = $(FORT_FAST_NO_STATIC) -qopt-prefetch -ffinite-math-only -qopt-mem-layout-trans=4 -auto %if defined(%{noopt}) COPTIMIZE = $(OPT_ROOT) CXXOPTIMIZE = $(OPT_ROOT) FOPTIMIZE = $(OPT_ROOT) %endif %else COPTIMIZE = $(FAST) -qopt-prefetch -ffinite-math-only -qopt-mem-layout-trans=4 CXXOPTIMIZE = $(FAST) -qopt-prefetch -ffinite-math-only -qopt-mem-layout-trans=4 FOPTIMIZE = $(FORT_FAST) -qopt-prefetch -ffinite-math-only -qopt-mem-layout-trans=4 -auto %if defined(%{noopt}) COPTIMIZE = $(OPT_ROOT) -static CXXOPTIMIZE = $(OPT_ROOT) -static FOPTIMIZE = $(OPT_ROOT) -static %endif %endif intrate=peak: %if defined(%{noopt}) || defined(%{medopt}) #not building or executing peak against less opt fail=1 %endif PASS1_CFLAGS = -prof-gen PASS2_CFLAGS = -prof-use PASS1_FFLAGS = -prof-gen PASS2_FFLAGS = -prof-use PASS1_CXXFLAGS = -prof-gen PASS2_CXXFLAGS = -prof-use PASS1_LDFLAGS = -prof-gen PASS2_LDFLAGS = -prof-use OPT_ROOT = -ipo -O3 -no-prec-div FAST_NO_STATIC_PASS1 = $(OPT_ROOT) FORT_FAST_NO_STATIC_PASS1 = $(OPT_ROOT) FAST_PASS1 = $(OPT_ROOT) -static FORT_FAST_PASS1 = $(OPT_ROOT) -static FAST_NO_STATIC_PASS2 = $(SSE) $(OPT_ROOT) FORT_FAST_NO_STATIC_PASS2 = $(SSE) $(OPT_ROOT) FAST_PASS2 = $(SSE) $(OPT_ROOT) -static FORT_FAST_PASS2 = $(SSE) $(OPT_ROOT) -static %if !defined(%{static}) PASS1_COPTIMIZE = $(FAST_NO_STATIC_PASS1) -qopt-mem-layout-trans=4 PASS1_CXXOPTIMIZE = $(FAST_NO_STATIC_PASS1) -qopt-mem-layout-trans=4 PASS1_FOPTIMIZE = $(FORT_FAST_NO_STATIC_PASS1) -qopt-mem-layout-trans=4 PASS2_COPTIMIZE = $(FAST_NO_STATIC_PASS2) -qopt-mem-layout-trans=4 PASS2_CXXOPTIMIZE = $(FAST_NO_STATIC_PASS2) -qopt-mem-layout-trans=4 PASS2_FOPTIMIZE = $(FORT_FAST_NO_STATIC_PASS2) -qopt-mem-layout-trans=4 %else PASS1_COPTIMIZE = $(FAST_PASS1) -qopt-mem-layout-trans=4 PASS1_CXXOPTIMIZE = $(FAST_PASS1) -qopt-mem-layout-trans=4 PASS1_FOPTIMIZE = $(FORT_FAST_PASS1) -qopt-mem-layout-trans=4 PASS2_COPTIMIZE = $(FAST_PASS2) -qopt-mem-layout-trans=4 PASS2_CXXOPTIMIZE = $(FAST_PASS2) -qopt-mem-layout-trans=4 PASS2_FOPTIMIZE = $(FORT_FAST_PASS2) -qopt-mem-layout-trans=4 %endif fprate=peak: %if defined(%{noopt}) || defined(%{medopt}) #not building or executing peak against less opt fail=1 %endif PASS1_CFLAGS = -prof-gen PASS2_CFLAGS = -prof-use PASS1_FFLAGS = -prof-gen PASS2_FFLAGS = -prof-use PASS1_CXXFLAGS = -prof-gen PASS2_CXXFLAGS = -prof-use PASS1_LDFLAGS = -prof-gen PASS2_LDFLAGS = -prof-use OPT_ROOT = -ipo -O3 -no-prec-div FAST_NO_STATIC_PASS1 = $(OPT_ROOT) FORT_FAST_NO_STATIC_PASS1 = $(OPT_ROOT) FAST_PASS1 = $(OPT_ROOT) -static FORT_FAST_PASS1 = $(OPT_ROOT) -static FAST_NO_STATIC_PASS2 = $(SSE) $(OPT_ROOT) FORT_FAST_NO_STATIC_PASS2 = $(SSE) $(OPT_ROOT) FAST_PASS2 = $(SSE) $(OPT_ROOT) -static FORT_FAST_PASS2 = $(SSE) $(OPT_ROOT) -static %if !defined(%{static}) PASS1_COPTIMIZE = $(FAST_NO_STATIC_PASS1) -qopt-prefetch -ffinite-math-only -qopt-mem-layout-trans=4 PASS1_CXXOPTIMIZE = $(FAST_NO_STATIC_PASS1) -qopt-prefetch -ffinite-math-only -qopt-mem-layout-trans=4 PASS1_FOPTIMIZE = $(FORT_FAST_NO_STATIC_PASS1) -qopt-prefetch -ffinite-math-only -qopt-mem-layout-trans=4 PASS2_COPTIMIZE = $(FAST_NO_STATIC_PASS2) -qopt-prefetch -ffinite-math-only -qopt-mem-layout-trans=4 PASS2_CXXOPTIMIZE = $(FAST_NO_STATIC_PASS2) -qopt-prefetch -ffinite-math-only -qopt-mem-layout-trans=4 PASS2_FOPTIMIZE = $(FORT_FAST_NO_STATIC_PASS2) -qopt-prefetch -ffinite-math-only -qopt-mem-layout-trans=4 -auto %else PASS1_COPTIMIZE = $(FAST_PASS1) -qopt-prefetch -ffinite-math-only -qopt-mem-layout-trans=4 PASS1_CXXOPTIMIZE = $(FAST_PASS1) -qopt-prefetch -ffinite-math-only -qopt-mem-layout-trans=4 PASS1_FOPTIMIZE = $(FORT_FAST_PASS1) -qopt-prefetch -ffinite-math-only -qopt-mem-layout-trans=4 PASS2_COPTIMIZE = $(FAST_PASS2) -qopt-prefetch -ffinite-math-only -qopt-mem-layout-trans=4 PASS2_CXXOPTIMIZE = $(FAST_PASS2) -qopt-prefetch -ffinite-math-only -qopt-mem-layout-trans=4 PASS2_FOPTIMIZE = $(FORT_FAST_PASS2) -qopt-prefetch -ffinite-math-only -qopt-mem-layout-trans=4 -auto %endif #some benchmarks do not want to share a core %if defined (%{smt-on}) %define numpeakcopies %{cores} 503.bwaves_r,510.parest_r,521.wrf_r,554.roms_r=peak: copies = %{numpeakcopies} %endif 500.perlbench_r=peak=default: #[56]00.perlbench[rs] has non standard signed overflow EXTRA_OPTIMIZE = -fno-strict-overflow 525.x264_r=peak: EXTRA_OPTIMIZE = -fno-alias 502.gcc_r,523.xalancbmk_r=peak: CC = icc -m32 -std=c11 -L/usr/local/IntelCompiler19/compilers_and_libraries_2019.4.227/linux/compiler/lib/ia32_lin CXX = icpc -m32 -L/usr/local/IntelCompiler19/compilers_and_libraries_2019.4.227/linux/compiler/lib/ia32_lin FC = ifort -m32 -L/usr/local/IntelCompiler19/compilers_and_libraries_2019.4.227/linux/compiler/lib/ia32_lin EXTRA_LIBS = -L$(JEMALLOC32_DIR) -l$(JEMALLOC32) EXTRA_LDFLAGS = -Wl,-z,muldefs #Change portability for 32b, large file support for safety PORTABILITY = -D_FILE_OFFSET_BITS=64 #int rate subset for removing FDO 505.mcf_r,557.xz_r,520.omnetpp_r,525.x264_r,548.exchange2_r,531.deepsjeng_r,541.leela_r=peak: feedback = 0 OPT_ROOT = -ipo -O3 -no-prec-div FAST_NO_STATIC = $(SSE) $(OPT_ROOT) FORT_FAST_NO_STATIC = $(SSE) $(OPT_ROOT) FAST = $(SSE) $(OPT_ROOT) -static FORT_FAST = $(SSE) $(OPT_ROOT) -static %if !defined(%{static}) COPTIMIZE = $(FAST_NO_STATIC) -qopt-mem-layout-trans=4 CXXOPTIMIZE = $(FAST_NO_STATIC) -qopt-mem-layout-trans=4 FOPTIMIZE = $(FORT_FAST_NO_STATIC) -qopt-mem-layout-trans=4 %else COPTIMIZE = $(FAST) -qopt-mem-layout-trans=4 CXXOPTIMIZE = $(FAST) -qopt-mem-layout-trans=4 FOPTIMIZE = $(FORT_FAST) -qopt-mem-layout-trans=4 %endif #fp rate subset for removing FDO 503.bwaves_r,507.cactuBSSN_r,510.parest_r,526.blender_r,538.imagick_r,544.nab_r,549.fotonik3d_r=peak=default: feedback = 0 OPT_ROOT = -ipo -O3 -no-prec-div FAST_NO_STATIC = $(SSE) $(OPT_ROOT) FORT_FAST_NO_STATIC = $(SSE) $(OPT_ROOT) FAST = $(SSE) $(OPT_ROOT) -static FORT_FAST = $(SSE) $(OPT_ROOT) -static %if !defined(%{static}) COPTIMIZE = $(FAST_NO_STATIC) -qopt-prefetch -ffinite-math-only -qopt-mem-layout-trans=4 CXXOPTIMIZE = $(FAST_NO_STATIC) -qopt-prefetch -ffinite-math-only -qopt-mem-layout-trans=4 FOPTIMIZE = $(FORT_FAST_NO_STATIC) -qopt-prefetch -ffinite-math-only -qopt-mem-layout-trans=4 -auto %if defined(%{noopt}) COPTIMIZE = $(OPT_ROOT) CXXOPTIMIZE = $(OPT_ROOT) FOPTIMIZE = $(OPT_ROOT) %endif %else COPTIMIZE = $(FAST) -qopt-prefetch -ffinite-math-only -qopt-mem-layout-trans=4 CXXOPTIMIZE = $(FAST) -qopt-prefetch -ffinite-math-only -qopt-mem-layout-trans=4 FOPTIMIZE = $(FORT_FAST) -qopt-prefetch -ffinite-math-only -qopt-mem-layout-trans=4 -auto %if defined(%{noopt}) COPTIMIZE = $(OPT_ROOT) -static CXXOPTIMIZE = $(OPT_ROOT) -static FOPTIMIZE = $(OPT_ROOT) -static %endif %endif #------------------------------------------------------------------------------- # Tester and System Descriptions - EDIT the sections below #------------------------------------------------------------------------------- # For info about any field, see # https://www.spec.org/auto/cpu2017/Docs/config.html#fieldname # Example: https://www.spec.org/auto/cpu2017/Docs/config.html#hw_memory #------------------------------------------------------------------------------- #--------- If you install new compilers, EDIT this section -------------------- intrate,intspeed,fpspeed,fprate: sw_compiler000 = C/C++: Version 19.0.4.227 of Intel C/C++ sw_compiler001 = Compiler Build 20190416 for Linux; sw_compiler002 = Fortran: Version 19.0.4.227 of Intel Fortran sw_compiler003 = Compiler Build 20190416 for Linux sw_base_ptrsize = 64-bit fprate,fpspeed: sw_peak_ptrsize = 64-bit sw_other = None intspeed: sw_peak_ptrsize = 64-bit sw_other001 = jemalloc memory allocator V5.0.1 intrate: sw_peak_ptrsize = 32/64-bit sw_other001 = jemalloc memory allocator V5.0.1 #--------- EDIT Your info --------------------------------------------------------- # To understand the difference between hw_vendor/sponsor/tester, see: # www.spec.org/auto/cpu2017/Docs/config.html#test_sponsor intrate,intspeed,fprate,fpspeed: # Important: keep this line hw_vendor = Dell Inc. tester = Dell Inc. test_sponsor = Dell Inc. license_num = 55 prepared_by = Dell Inc. #--------- EDIT system availability dates and system information ---------------------------------------------- intrate,intspeed,fprate,fpspeed: # Important: keep this line # Example # Brief info about field hw_avail = Apr-2019 sw_avail = May-2019 hw_cpu_nominal_mhz = 2200 hw_cpu_max_mhz = 4000 hw_ncores = 112 hw_nthreadspercore = 2 hw_ncpuorder = 2,4 chips hw_model000 = PowerEdge MX840c (Intel Xeon Platinum 8276, hw_model001 = 2.20GHz) hw_other = None # sw_other = # TurboHeap Library V8.1 # Other perf-relevant sw, or "None" hw_pcache = 32 KB I + 32 KB D on chip per core hw_scache = 1 MB I+D on chip per core hw_tcache = 38.5 MB I+D on chip per chip hw_ocache = None # hw_memory001 = # 4 TB (256 x 16 GB 2Rx4 PC4-2133P-R, # N GB (M x N GB nRxn # hw_memory002 = # running at 1600 MHz) # PCn-nnnnnR-n[, ECC and other info]) #--------- Sysinfo fields - You may need to adjust this section --------------- # Note: Some commented-out fields above are automatically set to preliminary # values by sysinfo # www.spec.org/auto/cpu2017/Docs/config.html#sysinfo # Uncomment lines for which you already have a better answer than sysinfo # intrate,intspeed,fprate,fpspeed: # Important: keep this line # Example # Brief info about field # hw_cpu_name = # Intel Xeon E9-9999 v9 # chip name # hw_disk = # 9 x 9 TB SATA III 9999 RPM # Size, type, other perf-relevant info # hw_nchips = # 99 # number chips enabled # sw_file = # ext99 # File system # sw_state = # Run level 99 # Software state. # sw_os001 = # Linux Sailboat # Operating system # sw_os002 = # Distribution 7.2 SP1 # and version #--------- EDIT Intel Recommended Fields - You may wish to adjust this section ----- default: notes_030 = NA: The test sponsor attests, as of date of publication, that CVE-2017-5754 (Meltdown) notes_035 = is mitigated in the system as tested and documented. #Ease of tagging results from the runcpu command line with commands run outside of runcpu harneess #Adjust as necessary for your SUT %if defined(%{THP_enabled}) notes_200 = Transparent Huge Pages enabled with: notes_201 = echo always > /sys/kernel/mm/transparent_hugepage/enabled %elif defined(%{THP_disabled}) notes_200 = Transparent Huge Pages disabled with: notes_201 = echo never > /sys/kernel/mm/transparent_hugepage/enabled %else notes_040 = Yes: The test sponsor attests, as of date of publication, that CVE-2017-5753 (Spectre variant 1) %endif %ifdef %{drop_caches} notes_045 = is mitigated in the system as tested and documented. notes_050 = Yes: The test sponsor attests, as of date of publication, that CVE-2017-5715 (Spectre variant 2) notes_055 = is mitigated in the system as tested and documented. %endif %ifdef %{invoke_with_interleave} notes_060 = Transparent Huge Pages enabled by default notes_065 = Prior to runcpu invocation notes_070 = Filesystem page cache synced and cleared with: notes_075 = sync; echo 3> /proc/sys/vm/drop_caches notes_080 = runcpu command invoked through numactl i.e.: notes_085 = numactl --interleave=all runcpu %endif intrate,fprate: %if defined(%{no-numa}) notes_submit_000 = The taskset mechanism was used to bind copies to processors. The config file option 'submit' notes_submit_001 = was used to generate taskset commands to bind each copy to a specific processor. notes_submit_002 = For details, please see the config file. %else notes_submit_000 = The numactl mechanism was used to bind copies to processors. The config file option 'submit' notes_submit_005 = was used to generate numactl commands to bind each copy to a specific processor. notes_submit_010 = For details, please see the config file. %endif intrate,intspeed: notes_jemalloc_003 = jemalloc, a general purpose malloc implementation notes_jemalloc_004 = built with the RedHat Enterprise 7.5, and the system compiler gcc 4.8.5 notes_jemalloc_005 = sources available from jemalloc.net or https://github.com/jemalloc/jemalloc/releases # The following settings were obtained by running the sysinfo_program # 'specperl $[top]/bin/sysinfo' (sysinfo:SHA:32259ebd59f3e93740723202f27c44c82ee68e0f2e40cd2ca50cfd5519772397) default: notes_plat_sysinfo_000 = Sysinfo program /home/cpu2017/bin/sysinfo notes_plat_sysinfo_005 = Rev: r5974 of 2018-05-19 9bcde8f2999c33d61f64985e45859ea9 notes_plat_sysinfo_010 = running on intel-sut Sat Nov 2 07:20:24 2019 notes_plat_sysinfo_015 = notes_plat_sysinfo_020 = SUT (System Under Test) info as seen by some common utilities. notes_plat_sysinfo_025 = For more information on this section, see notes_plat_sysinfo_030 = https://www.spec.org/cpu2017/Docs/config.html#sysinfo notes_plat_sysinfo_035 = notes_plat_sysinfo_040 = From /proc/cpuinfo notes_plat_sysinfo_045 = model name : Intel(R) Xeon(R) Platinum 8276 CPU @ 2.20GHz notes_plat_sysinfo_050 = 4 "physical id"s (chips) notes_plat_sysinfo_055 = 224 "processors" notes_plat_sysinfo_060 = cores, siblings (Caution: counting these is hw and system dependent. The following notes_plat_sysinfo_065 = excerpts from /proc/cpuinfo might not be reliable. Use with caution.) notes_plat_sysinfo_070 = cpu cores : 28 notes_plat_sysinfo_075 = siblings : 56 notes_plat_sysinfo_080 = physical 0: cores 0 1 2 3 4 5 6 8 9 10 11 12 13 14 16 17 18 19 20 21 22 24 25 26 27 notes_plat_sysinfo_085 = 28 29 30 notes_plat_sysinfo_090 = physical 1: cores 0 1 2 3 4 5 6 8 9 10 11 12 13 14 16 17 18 19 20 21 22 24 25 26 27 notes_plat_sysinfo_095 = 28 29 30 notes_plat_sysinfo_100 = physical 2: cores 0 1 2 3 4 5 6 8 9 10 11 12 13 14 16 17 18 19 20 21 22 24 25 26 27 notes_plat_sysinfo_105 = 28 29 30 notes_plat_sysinfo_110 = physical 3: cores 0 1 2 3 4 5 6 8 9 10 11 12 13 14 16 17 18 19 20 21 22 24 25 26 27 notes_plat_sysinfo_115 = 28 29 30 notes_plat_sysinfo_120 = notes_plat_sysinfo_125 = From lscpu: notes_plat_sysinfo_130 = Architecture: x86_64 notes_plat_sysinfo_135 = CPU op-mode(s): 32-bit, 64-bit notes_plat_sysinfo_140 = Byte Order: Little Endian notes_plat_sysinfo_145 = CPU(s): 224 notes_plat_sysinfo_150 = On-line CPU(s) list: 0-223 notes_plat_sysinfo_155 = Thread(s) per core: 2 notes_plat_sysinfo_160 = Core(s) per socket: 28 notes_plat_sysinfo_165 = Socket(s): 4 notes_plat_sysinfo_170 = NUMA node(s): 8 notes_plat_sysinfo_175 = Vendor ID: GenuineIntel notes_plat_sysinfo_180 = CPU family: 6 notes_plat_sysinfo_185 = Model: 85 notes_plat_sysinfo_190 = Model name: Intel(R) Xeon(R) Platinum 8276 CPU @ 2.20GHz notes_plat_sysinfo_195 = Stepping: 7 notes_plat_sysinfo_200 = CPU MHz: 1503.409 notes_plat_sysinfo_205 = BogoMIPS: 4400.00 notes_plat_sysinfo_210 = Virtualization: VT-x notes_plat_sysinfo_215 = L1d cache: 32K notes_plat_sysinfo_220 = L1i cache: 32K notes_plat_sysinfo_225 = L2 cache: 1024K notes_plat_sysinfo_230 = L3 cache: 39424K notes_plat_sysinfo_235 = NUMA node0 CPU(s): notes_plat_sysinfo_240 = 0,8,16,24,32,40,48,56,64,72,80,88,96,104,112,120,128,136,144,152,160,168,176,184,192 notes_plat_sysinfo_245 = ,200,208,216 notes_plat_sysinfo_250 = NUMA node1 CPU(s): notes_plat_sysinfo_255 = 1,9,17,25,33,41,49,57,65,73,81,89,97,105,113,121,129,137,145,153,161,169,177,185,193 notes_plat_sysinfo_260 = ,201,209,217 notes_plat_sysinfo_265 = NUMA node2 CPU(s): notes_plat_sysinfo_270 = 2,10,18,26,34,42,50,58,66,74,82,90,98,106,114,122,130,138,146,154,162,170,178,186,19 notes_plat_sysinfo_275 = 4,202,210,218 notes_plat_sysinfo_280 = NUMA node3 CPU(s): notes_plat_sysinfo_285 = 3,11,19,27,35,43,51,59,67,75,83,91,99,107,115,123,131,139,147,155,163,171,179,187,19 notes_plat_sysinfo_290 = 5,203,211,219 notes_plat_sysinfo_295 = NUMA node4 CPU(s): notes_plat_sysinfo_300 = 4,12,20,28,36,44,52,60,68,76,84,92,100,108,116,124,132,140,148,156,164,172,180,188,1 notes_plat_sysinfo_305 = 96,204,212,220 notes_plat_sysinfo_310 = NUMA node5 CPU(s): notes_plat_sysinfo_315 = 5,13,21,29,37,45,53,61,69,77,85,93,101,109,117,125,133,141,149,157,165,173,181,189,1 notes_plat_sysinfo_320 = 97,205,213,221 notes_plat_sysinfo_325 = NUMA node6 CPU(s): notes_plat_sysinfo_330 = 6,14,22,30,38,46,54,62,70,78,86,94,102,110,118,126,134,142,150,158,166,174,182,190,1 notes_plat_sysinfo_335 = 98,206,214,222 notes_plat_sysinfo_340 = NUMA node7 CPU(s): notes_plat_sysinfo_345 = 7,15,23,31,39,47,55,63,71,79,87,95,103,111,119,127,135,143,151,159,167,175,183,191,1 notes_plat_sysinfo_350 = 99,207,215,223 notes_plat_sysinfo_355 = Flags: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov notes_plat_sysinfo_360 = pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx pdpe1gb rdtscp notes_plat_sysinfo_365 = lm constant_tsc art arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc cpuid notes_plat_sysinfo_370 = aperfmperf pni pclmulqdq dtes64 monitor ds_cpl vmx smx est tm2 ssse3 sdbg fma cx16 notes_plat_sysinfo_375 = xtpr pdcm pcid dca sse4_1 sse4_2 x2apic movbe popcnt aes xsave avx f16c rdrand notes_plat_sysinfo_380 = lahf_lm abm 3dnowprefetch cpuid_fault epb cat_l3 cdp_l3 invpcid_single intel_ppin notes_plat_sysinfo_385 = ssbd mba ibrs ibpb stibp ibrs_enhanced tpr_shadow vnmi flexpriority ept vpid notes_plat_sysinfo_390 = fsgsbase tsc_adjust bmi1 hle avx2 smep bmi2 erms invpcid rtm cqm mpx rdt_a avx512f notes_plat_sysinfo_395 = avx512dq rdseed adx smap clflushopt clwb intel_pt avx512cd avx512bw avx512vl notes_plat_sysinfo_400 = xsaveopt xsavec xgetbv1 xsaves cqm_llc cqm_occup_llc cqm_mbm_total cqm_mbm_local notes_plat_sysinfo_405 = dtherm ida arat pln pts pku ospke avx512_vnni flush_l1d arch_capabilities notes_plat_sysinfo_410 = notes_plat_sysinfo_415 = /proc/cpuinfo cache data notes_plat_sysinfo_420 = cache size : 39424 KB notes_plat_sysinfo_425 = notes_plat_sysinfo_430 = From numactl --hardware WARNING: a numactl 'node' might or might not correspond to a notes_plat_sysinfo_435 = physical chip. notes_plat_sysinfo_440 = available: 8 nodes (0-7) notes_plat_sysinfo_445 = node 0 cpus: 0 8 16 24 32 40 48 56 64 72 80 88 96 104 112 120 128 136 144 152 160 168 notes_plat_sysinfo_450 = 176 184 192 200 208 216 notes_plat_sysinfo_455 = node 0 size: 95145 MB notes_plat_sysinfo_460 = node 0 free: 94634 MB notes_plat_sysinfo_465 = node 1 cpus: 1 9 17 25 33 41 49 57 65 73 81 89 97 105 113 121 129 137 145 153 161 169 notes_plat_sysinfo_470 = 177 185 193 201 209 217 notes_plat_sysinfo_475 = node 1 size: 96762 MB notes_plat_sysinfo_480 = node 1 free: 96260 MB notes_plat_sysinfo_485 = node 2 cpus: 2 10 18 26 34 42 50 58 66 74 82 90 98 106 114 122 130 138 146 154 162 170 notes_plat_sysinfo_490 = 178 186 194 202 210 218 notes_plat_sysinfo_495 = node 2 size: 96762 MB notes_plat_sysinfo_500 = node 2 free: 96172 MB notes_plat_sysinfo_505 = node 3 cpus: 3 11 19 27 35 43 51 59 67 75 83 91 99 107 115 123 131 139 147 155 163 171 notes_plat_sysinfo_510 = 179 187 195 203 211 219 notes_plat_sysinfo_515 = node 3 size: 96762 MB notes_plat_sysinfo_520 = node 3 free: 96275 MB notes_plat_sysinfo_525 = node 4 cpus: 4 12 20 28 36 44 52 60 68 76 84 92 100 108 116 124 132 140 148 156 164 172 notes_plat_sysinfo_530 = 180 188 196 204 212 220 notes_plat_sysinfo_535 = node 4 size: 96762 MB notes_plat_sysinfo_540 = node 4 free: 96203 MB notes_plat_sysinfo_545 = node 5 cpus: 5 13 21 29 37 45 53 61 69 77 85 93 101 109 117 125 133 141 149 157 165 173 notes_plat_sysinfo_550 = 181 189 197 205 213 221 notes_plat_sysinfo_555 = node 5 size: 96741 MB notes_plat_sysinfo_560 = node 5 free: 96248 MB notes_plat_sysinfo_565 = node 6 cpus: 6 14 22 30 38 46 54 62 70 78 86 94 102 110 118 126 134 142 150 158 166 174 notes_plat_sysinfo_570 = 182 190 198 206 214 222 notes_plat_sysinfo_575 = node 6 size: 96762 MB notes_plat_sysinfo_580 = node 6 free: 96273 MB notes_plat_sysinfo_585 = node 7 cpus: 7 15 23 31 39 47 55 63 71 79 87 95 103 111 119 127 135 143 151 159 167 175 notes_plat_sysinfo_590 = 183 191 199 207 215 223 notes_plat_sysinfo_595 = node 7 size: 96760 MB notes_plat_sysinfo_600 = node 7 free: 96203 MB notes_plat_sysinfo_605 = node distances: notes_plat_sysinfo_610 = node 0 1 2 3 4 5 6 7 notes_plat_sysinfo_615 = 0: 10 21 21 21 11 21 21 21 notes_plat_sysinfo_620 = 1: 21 10 21 21 21 11 21 21 notes_plat_sysinfo_625 = 2: 21 21 10 21 21 21 11 21 notes_plat_sysinfo_630 = 3: 21 21 21 10 21 21 21 11 notes_plat_sysinfo_635 = 4: 11 21 21 21 10 21 21 21 notes_plat_sysinfo_640 = 5: 21 11 21 21 21 10 21 21 notes_plat_sysinfo_645 = 6: 21 21 11 21 21 21 10 21 notes_plat_sysinfo_650 = 7: 21 21 21 11 21 21 21 10 notes_plat_sysinfo_655 = notes_plat_sysinfo_660 = From /proc/meminfo notes_plat_sysinfo_665 = MemTotal: 791000260 kB notes_plat_sysinfo_670 = HugePages_Total: 0 notes_plat_sysinfo_675 = Hugepagesize: 2048 kB notes_plat_sysinfo_680 = notes_plat_sysinfo_685 = /usr/bin/lsb_release -d notes_plat_sysinfo_690 = Ubuntu 18.04.2 LTS notes_plat_sysinfo_695 = notes_plat_sysinfo_700 = From /etc/*release* /etc/*version* notes_plat_sysinfo_705 = debian_version: buster/sid notes_plat_sysinfo_710 = os-release: notes_plat_sysinfo_715 = NAME="Ubuntu" notes_plat_sysinfo_720 = VERSION="18.04.2 LTS (Bionic Beaver)" notes_plat_sysinfo_725 = ID=ubuntu notes_plat_sysinfo_730 = ID_LIKE=debian notes_plat_sysinfo_735 = PRETTY_NAME="Ubuntu 18.04.2 LTS" notes_plat_sysinfo_740 = VERSION_ID="18.04" notes_plat_sysinfo_745 = HOME_URL="https://www.ubuntu.com/" notes_plat_sysinfo_750 = SUPPORT_URL="https://help.ubuntu.com/" notes_plat_sysinfo_755 = notes_plat_sysinfo_760 = uname -a: notes_plat_sysinfo_765 = Linux intel-sut 4.15.0-45-generic #48-Ubuntu SMP Tue Jan 29 16:28:13 UTC 2019 x86_64 notes_plat_sysinfo_770 = x86_64 x86_64 GNU/Linux notes_plat_sysinfo_775 = notes_plat_sysinfo_780 = Kernel self-reported vulnerability status: notes_plat_sysinfo_785 = notes_plat_sysinfo_790 = CVE-2017-5754 (Meltdown): Not affected notes_plat_sysinfo_795 = CVE-2017-5753 (Spectre variant 1): Mitigation: __user pointer sanitization notes_plat_sysinfo_800 = CVE-2017-5715 (Spectre variant 2): Mitigation: Enhanced IBRS, IBPB notes_plat_sysinfo_805 = notes_plat_sysinfo_810 = run-level 3 Nov 1 21:44 notes_plat_sysinfo_815 = notes_plat_sysinfo_820 = SPEC is set to: /home/cpu2017 notes_plat_sysinfo_825 = Filesystem Type Size Used Avail Use% Mounted on notes_plat_sysinfo_830 = /dev/sda2 ext4 439G 31G 386G 8% / notes_plat_sysinfo_835 = notes_plat_sysinfo_840 = Additional information from dmidecode follows. WARNING: Use caution when you interpret notes_plat_sysinfo_845 = this section. The 'dmidecode' program reads system data which is "intended to allow notes_plat_sysinfo_850 = hardware to be accurately determined", but the intent may not be met, as there are notes_plat_sysinfo_855 = frequent changes to hardware, firmware, and the "DMTF SMBIOS" standard. notes_plat_sysinfo_860 = BIOS Dell Inc. 2.2.9 05/08/2019 notes_plat_sysinfo_865 = Memory: notes_plat_sysinfo_870 = 16x 00AD00B300AD HMA84GR7CJR4N-WM 32 GB 2 rank 2933 notes_plat_sysinfo_875 = 8x 00AD063200AD HMA84GR7CJR4N-WM 32 GB 2 rank 2933 notes_plat_sysinfo_880 = 24x Not Specified Not Specified notes_plat_sysinfo_885 = notes_plat_sysinfo_890 = (End of data from sysinfo program) hw_cpu_name = Intel Xeon Platinum 8276 hw_disk = 1 x 480 GB SATA SSD hw_memory000 = 768 GB (24 x 32 GB 2Rx4 PC4-2933Y-R) hw_nchips = 4 prepared_by = root (is never output, only tags rawfile) fw_bios = Version 2.2.9 released May-2019 sw_file = ext4 sw_os000 = Ubuntu 18.04.2 LTS sw_os001 = kernel 4.15.0-45-generic sw_state = Run level 3 (multi-user) # End of settings added by sysinfo_program # The following section was added automatically, and contains settings that # did not appear in the original configuration file, but were added to the # raw file after the run. default: notes_000 =Environment variables set by runcpu before the start of the run: notes_005 =LD_LIBRARY_PATH = "/home/cpu2017/lib/intel64:/home/cpu2017/lib/ia32:/home/cpu2017/je5.0.1-32" notes_010 = notes_015 = Binaries compiled on a system with 1x Intel Core i9-799X CPU + 32GB RAM notes_020 = memory using Redhat Enterprise Linux 7.5 notes_025 = notes_plat_form_000 = BIOS settings: notes_plat_form_005 = ADDDC setting disabled notes_plat_form_010 = Sub NUMA Cluster disabled notes_plat_form_015 = Virtualization Technology disabled notes_plat_form_020 = DCU Streamer Prefetcher disabled notes_plat_form_025 = System Profile set to Custom notes_plat_form_030 = CPU Performance set to Maximum Performance notes_plat_form_035 = C States set to Autonomous notes_plat_form_040 = C1E disabled notes_plat_form_045 = Uncore Frequency set to Dynamic notes_plat_form_050 = Energy Efficiency Policy set to Performance notes_plat_form_055 = Memory Patrol Scrub disabled notes_plat_form_060 = Logical Processor enabled notes_plat_form_065 = CPU Interconnect Bus Link Power Management disabled notes_plat_form_070 = PCI ASPM L1 Link Power Management disabled