# Invocation command line: # /mnt/ramdisk/cpu2017-1.1.0/bin/harness/runcpu --configfile amd_speed_aocc200_rome_C1.cfg --tune all --reportable --iterations 3 --nopower --runmode speed --tune base:peak --size test:train:refspeed intspeed # output_root was not used for this run ############################################################################ ################################################################################ # AMD AOCC 2.0.0 SPEC CPU2017 V1.1.0 Speed Configuration File for 64-bit Linux # # File name : amd_speed_aocc200_rome_C1.cfg # Creation Date : August 22, 2019 # CPU2017 Version : 1.1.0 # Supported benchmarks : All Speed benchmarks (intspeed, fpspeed) # Compiler name/version : AOCC v2.0.0 # Operating system version : Fedora 26 # Supported OS's : Ubuntu 18.04/19.04, RHEL 8.0, SLES 15 SP1 # Hardware : AMD Rome, Naples (AMD64) # FP Base Pointer Size : 64-bit # FP Peak Pointer Size : 64-bit # INT Base Pointer Size : 64-bit # INT Peak Pointer Size : 32/64-bit # Auto Parallization : No # # Note: DO NOT EDIT THIS FILE, the only edits required to properly run these # binaries are made in the ini Python file. Please consult Readme.amd_speed_aocc200_rome_C1.txt # for a few uncommon exceptions which require edits to this file. # # Description: # # This binary package automates away many of the complexities necessary to set # up and run SPEC CPU2017 under optimized conditions on AMD Rome/Naples-based # server platforms within Linux (AMD64). # # The binary package was built specifically for AMD Rome/Naples microprocessors and # is not intended to run on other products. # # Please install the binary package by following the instructions in # "Readme.amd_speed_aocc200_rome_C1.txt" under the "How To Use the Binaries" section. # # The binary package is designed to work without alteration on two socket AMD # Rome/Naples-based servers with 64 cores per socket, SMT enabled and 1 TiB of DDR4 # memory distributed evenly among all 16 channels using 32 GiB DIMMs. # # To run the binary package on other Rome/Naples configurations, please review # "Readme.amd_speed_aocc200_rome_C1.txt". In general, Rome or Naples CPUs # should be autodetected with no action required by the user. # # In most cases, it should be unnecessary to edit "amd_speed_aocc200_rome_C1.cfg" or any # other file besides "ini_amd_speed_aocc200_rome_C1.py" where reporting fields # and run conditions are set. # # The run script automatically sets the optimal number of speed copies and binds # them appropriately. # # The run script and accompanying binary package are designed to work on Ubuntu # 18.04/19.04, RHEL 8.0 and SLES 15 SP1. # # Important! If you write your own run script, please set the stack size to # "unlimited" when executing this binary package. Failure to do so may cause # some benchmarks to overflow the stack. For example, to set stack size within # the bash shell, include the following line somewhere at the top of your run # script before the runcpu invocation: # # ulimit -s unlimited # # Modification of this config file should only be necessary if you intend to # rebuild the binaries. General instructions for rebuilding the binaries are # found in-line below. # ################################################################################ # Include file name ################################################################################ # The include file contains fields that are commonly changed. This file is auto- # generated based upon INI file settings and should not need user modification # for runs. %define inc_file_name amd_speed_aocc200_rome_C1.inc ################################################################################ # Binary label extension and "allow_build" switch ################################################################################ # Only modify the binary label extension if you plan to rebuild the binaries. %define ext amd_speed_aocc200_rome_C # If you plan to recompile these CPU2017 binaries, please choose a new extension # name (ext above) to avoid confusion with the current binary set on your system # under test, and to avoid confusion for SPEC submission reviewers. You will # also need to set "allow_build" to true below. Finally, you must modify the # Paths section below to point to your library locations if the paths are not # already set up in your build environment. # Change the following line to true if you intend to REBUILD the binaries (AMD # does not support this). Valid values are "true" or "false" (no quotes). %define allow_build false ################################################################################ # Paths and Environment Variables # ** MODIFY AS NEEDED (modification should not be necessary for runs) ** ################################################################################ # Allow environment variables to be set before runs: preenv = 1 # Necessary to avoid out-of-memory exceptions on certain SUTs: preENV_MALLOC_CONF = retain:true # Define the name of the directory that holds AMD library files: %define lib_dir amd_speed_aocc200_rome_C_lib # Set the shared object library path for runs and builds: preENV_LD_LIBRARY_PATH = $[top]/%{lib_dir}/64;$[top]/%{lib_dir}/32:%{ENV_LD_LIBRARY_PATH} # Define 32-bit library build paths: # Do not use $[top] with the 32-bit libraries because doing so will cause an # options checksum error triggering a xalanc recompile attempt on SUTs having # different file paths: JEMALLOC_LIB32_PATH = /sppo/dev/cpu2017/v110/%{lib_dir}/32 OMP_LIB32_PATH = /sppo/dev/cpu2017/v110/%{lib_dir}/32 %if '%{allow_build}' eq 'false' # The include file is only needed for runs, but not for builds. # include: %{inc_file_name} # ----- Begin inclusion of 'amd_speed_aocc200_rome_C1.inc' ############################################################################ ################################################################################ ################################################################################ # File name: amd_speed_aocc200_rome_C1.inc # File generation code date: August 12, 2019 # File generation date/time: December 03, 2019 / 08:31:45 # # This file is automatically generated during a SPEC CPU2017 run. # # To modify inc file generation, please consult the readme file or the run # script. ################################################################################ ################################################################################ ################################################################################ ################################################################################ # The following macros are generated for use in the cfg file. ################################################################################ ################################################################################ %define logical_core_count 128 %define physical_core_count 64 ################################################################################ # The following macros define the Speed thread counts for the peak benchmarks. # # intspeed benchmarks: 600.perlbench_s,602.gcc_s,605.mcf_s,620.omnetpp_s, # 623.xalancbmk_s,625.x264_s,631.deepsjeng_s,641.leela_s,648.exchange2_s, # 657.xz_s # fpspeed benchmarks: 603.bwaves_s,607.cactuBSSN_s,619.lbm_s,621.wrf_s, # 627.cam4_s,628.pop2_s,638.imagick_s,644.nab_s,649.fotonik3d_s, # 654.roms_s # ################################################################################ # default preENV thread settings: default: preENV_OMP_THREAD_LIMIT = 128 preENV_GOMP_CPU_AFFINITY = 0-127 ################################################################################ ################################################################################ # intspeed base thread counts: intspeed=base: threads = 64 ENV_GOMP_CPU_AFFINITY = 0-63 bind0 = numactl --physcpubind=0-63 submit = echo "$command" > run.sh ; $BIND bash run.sh ################################################################################ ################################################################################ # fpspeed base thread counts: fpspeed=base: threads = 64 ENV_GOMP_CPU_AFFINITY = 0-63 bind0 = numactl --physcpubind=0-63 submit = echo "$command" > run.sh ; $BIND bash run.sh ################################################################################ ################################################################################ # peak thread counts: 1 600.perlbench_s,602.gcc_s,605.mcf_s,620.omnetpp_s,623.xalancbmk_s,625.x264_s,631.deepsjeng_s,641.leela_s,648.exchange2_s=peak: threads = 1 ENV_GOMP_CPU_AFFINITY = 0 bind0 = numactl --physcpubind=0 submit = echo "$command" > run.sh ; $BIND bash run.sh ################################################################################ ################################################################################ # peak thread counts: 64 603.bwaves_s,607.cactuBSSN_s,621.wrf_s,627.cam4_s,628.pop2_s,638.imagick_s,649.fotonik3d_s,654.roms_s,657.xz_s=peak: threads = 64 ENV_GOMP_CPU_AFFINITY = 0-63 bind0 = numactl --physcpubind=0-63 submit = echo "$command" > run.sh ; $BIND bash run.sh ################################################################################ ################################################################################ # peak thread counts: 128 619.lbm_s,644.nab_s=peak: threads = 128 ENV_GOMP_CPU_AFFINITY = 0 64 1 65 2 66 3 67 4 68 5 69 6 70 7 71 8 72 9 73 10 74 11 75 12 76 13 77 14 78 15 79 16 80 17 81 18 82 19 83 20 84 21 85 22 86 23 87 24 88 25 89 26 90 27 91 28 92 29 93 30 94 31 95 32 96 33 97 34 98 35 99 36 100 37 101 38 102 39 103 40 104 41 105 42 106 43 107 44 108 45 109 46 110 47 111 48 112 49 113 50 114 51 115 52 116 53 117 54 118 55 119 56 120 57 121 58 122 59 123 60 124 61 125 62 126 63 127 bind0 = numactl --physcpubind=0-127 submit = echo "$command" > run.sh ; $BIND bash run.sh ################################################################################ ################################################################################ ################################################################################ # Switch back to default: default: ################################################################################ ################################################################################ ################################################################################ # The remainder of this file defines CPU2017 report parameters. ################################################################################ ################################################################################ ################################################################################ # SPEC CPU 2017 report header ################################################################################ license_num =55 # (Your SPEC license number) tester =Dell Inc. test_sponsor =Dell Inc. hw_vendor =Dell Inc. hw_model000 =PowerEdge R7525 (AMD EPYC 7532, 2.40 GHz) #--------- If you install new compilers, edit this section -------------------- sw_compiler =C/C++/Fortran: Version 2.0.0 of AOCC ################################################################################ ################################################################################ # Hardware, firmware and software information ################################################################################ hw_avail =Feb-2020 sw_avail =Aug-2019 hw_cpu_name =AMD EPYC ROME32 hw_cpu_nominal_mhz =2400 hw_cpu_max_mhz =3300 hw_ncores =64 hw_nthreadspercore =2 hw_ncpuorder =1,2 chips hw_other =None # Other perf-relevant hw, or "None" fw_bios =Version 1.2.6 released Nov-2019 sw_base_ptrsize =64-bit hw_pcache =32 KB I + 32 KB D on chip per core hw_scache =512 KB I+D on chip per core hw_tcache000 =256 MB I+D on chip per chip, 16 MB shared / 2 hw_tcache001 = cores hw_ocache =None ################################################################################ # Notes ################################################################################ # Enter notes_000 through notes_100 here. notes_000 =Binaries were compiled on a system with 2x AMD EPYC 7601 CPU + 512GB Memory using Fedora 26 notes_005 = notes_010 =NA: The test sponsor attests, as of date of publication, that CVE-2017-5754 (Meltdown) notes_015 =is mitigated in the system as tested and documented. notes_020 =Yes: The test sponsor attests, as of date of publication, that CVE-2017-5753 (Spectre variant 1) notes_025 =is mitigated in the system as tested and documented. notes_030 =Yes: The test sponsor attests, as of date of publication, that CVE-2017-5715 (Spectre variant 2) notes_035 =is mitigated in the system as tested and documented. notes_040 = notes_submit_000 ='numactl' was used to bind copies to the cores. notes_submit_005 =See the configuration file for details. notes_os_000 ='ulimit -s unlimited' was used to set environment stack size notes_os_005 ='ulimit -l 2097152' was used to set environment locked pages in memory limit notes_os_010 = notes_os_015 =runcpu command invoked through numactl i.e.: notes_os_020 =numactl --interleave=all runcpu notes_os_025 = notes_os_030 =Set dirty_ratio=8 to limit dirty cache to 8% of memory notes_os_035 =Set swappiness=1 to swap only if necessary notes_os_040 =Set zone_reclaim_mode=1 to free local node memory and avoid remote memory notes_os_045 =sync then drop_caches=3 to reset caches before invoking runcpu notes_os_050 = notes_os_055 =dirty_ratio, swappiness, zone_reclaim_mode and drop_caches were notes_os_060 =all set using privileged echo (e.g. echo 1 > /proc/sys/vm/swappiness). notes_os_065 = notes_os_070 =Transparent huge pages set to 'always' for this run (OS default) notes_comp_000 =The AMD64 AOCC Compiler Suite is available at notes_comp_005 =http://developer.amd.com/amd-aocc/ notes_comp_010 = notes_jemalloc_000 =jemalloc: configured and built with GCC v9.1.0 in Ubuntu 19.04 with -O3 -znver2 -flto notes_jemalloc_005 =jemalloc 5.1.0 is available here: notes_jemalloc_010 =https://github.com/jemalloc/jemalloc/releases/download/5.1.0/jemalloc-5.1.0.tar.bz2 notes_jemalloc_015 = sw_other =jemalloc: jemalloc memory allocator library v5.1.0 power_management = BIOS set to prefer performance at the cost of additional power usage. ################################################################################ # The following note fields describe platorm settings. ################################################################################ # example: (uncomment as necessary) notes_plat_000 = BIOS settings: notes_plat_005 = NUMA Nodes Per Socket set to 4 notes_plat_010 = CCX as NUMA Domain set to Enabled notes_plat_015 = System Profile set to Custom notes_plat_020 = CPU Power Management set to Maximum Performance notes_plat_025 = Memory Frequency set to Maximum Performance notes_plat_030 = Turbo Boost Enabled notes_plat_035 = Cstates set to Enabled notes_plat_040 = Memory Patrol Scrub Disabled notes_plat_045 = Memory Refresh Rate set to 1x notes_plat_050 = PCI ASPM L1 Link Power Management Disabled notes_plat_055 = Determinism Slider set to Power Determinism notes_plat_060 = Efficiency Optimized Mode Disabled notes_plat_065 = Memory Interleaving set to Disabled ################################################################################ # The following are custom fields: ################################################################################ # Use custom_fields to enter lines that are not listed here. For example: # notes_plat_100 = Energy Bias set to Max Performance # new_field = Ambient temperature set to 10C ################################################################################ # The following fields must be set here for only Int benchmarks. ################################################################################ intspeed: sw_peak_ptrsize =32/64-bit ################################################################################ # The following fields must be set here for FP benchmarks. ################################################################################ fpspeed: sw_peak_ptrsize =64-bit ################################################################################ # The following fields must be set here or they will be overwritten by sysinfo. ################################################################################ intspeed,fpspeed: hw_disk =1 x 800 GB SATA SSD hw_memory000 =512 GB (16 x 32 GB 2Rx4 PC4-3200AA-R) hw_memory002 = hw_nchips =2 prepared_by =Dell Inc. sw_file =tmpfs sw_os000 =SUSE Linux Enterprise Server 15 SP1 sw_os001 =kernel 4.12.14-195-default sw_state =Run level 3 (multi-user) ################################################################################ # End of inc file ################################################################################ # Switch back to the default block after the include file: default: # ---- End inclusion of '/mnt/ramdisk/cpu2017-1.1.0/config/amd_speed_aocc200_rome_C1.inc' # Switch back to default block after the include file: default: fail_build = 1 # OpenMP environment variables: preENV_OMP_STACKSIZE = 128M preENV_OMP_SCHEDULE = static preENV_OMP_DYNAMIC = false %elif '%{allow_build}' eq 'true' # If you intend to rebuild, be sure to set the library paths either in the # build script or here: preENV_LIBRARY_PATH = $[top]/%{lib_dir}/64;$[top]/%{lib_dir}/32:%{ENV_LIBRARY_PATH} % define build_ncpus 64 # controls the number of simultaneous compile jobs fail_build = 0 makeflags = --jobs=%{build_ncpus} --load-average=%{build_ncpus} %else % error The value of "allow_build" is %{allow_build}, but it can only be "true" or "false". This error was generated %endif ################################################################################ # Enable automated data collection per benchmark ################################################################################ # Data collection is not enabled for reportable runs. # teeout is necessary to get data collection stdout into the logs. Best # practices for the individual data collection items would be to have # them store important output in separate files. Filenames could be # constructed from $SPEC (environment), $lognum (result number from runcpu), # and benchmark name/number. teeout = yes # Run runcpu with '-v 35' (or greater) to log lists of variables which can # be used in substitutions as below. # For CPU2006, change $label to $ext %define data-collection-parameters benchname='$name' benchnum='$num' benchmark='$benchmark' iteration=$iter size='$size' tune='$tune' label='$label' log='$log' lognum='$lognum' from_runcpu='$from_runcpu' %define data-collection-start $[top]/data-collection/data-collection start %{data-collection-parameters} %define data-collection-stop $[top]/data-collection/data-collection stop %{data-collection-parameters} monitor_specrun_wrapper = %{data-collection-start} ; $command ; %{data-collection-stop} ################################################################################ # Header settings ################################################################################ backup_config = 0 # set to 0 if you do not want backup files bench_post_setup = sync # command_add_redirect: If set, the generated ${command} will include # redirection operators (stdout, stderr), which are passed along to the shell # that executes the command. If this variable is not set, specinvoke does the # redirection. command_add_redirect = yes env_vars = yes flagsurl000 = http://www.spec.org/cpu2017/flags/aocc200-flags-B1-speed-Dell.xml flagsurl001 = http://www.spec.org/cpu2017/flags/Dell-Platform-Flags-PowerEdge-revE7.xml #flagsurl02 = $[top]/INVALID_platform_amd_speed_aocc200_rome.xml # label: User defined extension string that tags your binaries & directories: label = %{ext} line_width = 1020 log_line_width = 1020 mean_anyway = yes output_format = all reportable = yes size = test,train,ref teeout = yes teerunout = yes tune = base,peak use_submit_for_speed = yes ################################################################################ # Compilers ################################################################################ default: CC = clang CXX = clang++ FC = flang CLD = clang FLD = flang CC_VERSION_OPTION = --version CXX_VERSION_OPTION = --version FC_VERSION_OPTION = --version default:# data model applies to all benchmarks ################################################################################ # Default Flags ################################################################################ EXTRA_PORTABILITY = -DSPEC_LP64 EXTRA_LIBS = -fopenmp=libomp -lomp -ljemalloc -lamdlibm -lm MATHLIBOPT = ################################################################################ # Portability Flags ################################################################################ default: # *** Benchmark-specific portability *** # Anything other than the data model is only allowed where a need is proven. # (ordered by last 2 digits of benchmark number) 600.perlbench_s: #lang='C' PORTABILITY = -DSPEC_LINUX_X64 621.wrf_s: #lang='F,C' CPORTABILITY = -DSPEC_CASE_FLAG FPORTABILITY = -Mbyteswapio 623.xalancbmk_s: #lang='CXX' PORTABILITY = -DSPEC_LINUX 627.cam4_s: #lang='F,C' PORTABILITY = -DSPEC_CASE_FLAG 628.pop2_s: #lang='F,C' CPORTABILITY = -DSPEC_CASE_FLAG FPORTABILITY = -Mbyteswapio ################################################################################ # Tuning Flags ################################################################################ ##################### # Base tuning flags # ##################### default=base: #optimize flags COPTIMIZE = -O3 -flto -ffast-math -march=znver2 -fstruct-layout=3 \ -mllvm -unroll-threshold=50 -fremap-arrays \ -mllvm -function-specialize -mllvm -enable-gvn-hoist \ -mllvm -reduce-array-computations=3 -mllvm -global-vectorize-slp \ -mllvm -vector-library=LIBMVEC \ -mllvm -inline-threshold=1000 -flv-function-specialization CXXOPTIMIZE = -O3 -flto -ffast-math -march=znver2 \ -mllvm -loop-unswitch-threshold=200000 \ -mllvm -vector-library=LIBMVEC \ -mllvm -unroll-threshold=100 -flv-function-specialization \ -mllvm -enable-partial-unswitch FOPTIMIZE = -O3 -flto -march=znver2 -funroll-loops -Mrecursive \ -mllvm -vector-library=LIBMVEC EXTRA_FFLAGS = -Kieee -fno-finite-math-only #linker flags LDFLAGS = -flto -Wl,-mllvm -Wl,-function-specialize \ -Wl,-mllvm -Wl,-region-vectorize \ -Wl,-mllvm -Wl,-vector-library=LIBMVEC \ -Wl,-mllvm -Wl,-reduce-array-computations=3 LDCXXFLAGS = -Wl,-mllvm -Wl,-suppress-fmas #other libraries # Put OpenMP and math libraries here: EXTRA_LIBS = -fopenmp=libomp -lomp -lpthread -ldl -lmvec -lamdlibm -ljemalloc -lflang -lm # Don't put the AMD and mvec math libraries in MATHLIBOPT because it will trigger a reporting issue # because GCC won't use them. Forcefeed all benchmarks the math libraries in EXTRA_LIBS and clear # out MATHLIBOPT. MATHLIBOPT = # The following is necessary for 502/602 gcc: EXTRA_OPTIMIZE = -DSPEC_OPENMP -fopenmp -Wno-return-type -DUSE_OPENMP # The following is necessary for 502/602 gcc: LDOPTIMIZE = -z muldefs ######################## # intspeed tuning flags # ######################## intspeed: EXTRA_FFLAGS = -ffast-math \ -mllvm -disable-indvar-simplify \ -mllvm -unroll-aggressive \ -mllvm -unroll-threshold=150 LDFFLAGS = -ffast-math \ -Wl,-mllvm -Wl,-inline-recursion=4 \ -Wl,-mllvm -Wl,-lsr-in-nested-loop \ -Wl,-mllvm -Wl,-enable-iv-split ######################## # fpspeed tuning flags # ######################## fpspeed: CXX = clang++ -std=c++98 ##################### # Peak tuning flags # ##################### default=peak: #optimize flags COPTIMIZE = -Ofast -flto -march=znver2 -mno-sse4a -fstruct-layout=5 \ -mllvm -vectorize-memory-aggressively \ -mllvm -function-specialize -mllvm -enable-gvn-hoist \ -mllvm -unroll-threshold=50 -fremap-arrays \ -mllvm -vector-library=LIBMVEC \ -mllvm -reduce-array-computations=3 -mllvm -global-vectorize-slp \ -mllvm -inline-threshold=1000 -flv-function-specialization CXXOPTIMIZE = -Ofast -flto -march=znver2 -flv-function-specialization \ -mllvm -unroll-threshold=100 -mllvm -enable-partial-unswitch \ -mllvm -loop-unswitch-threshold=200000 \ -mllvm -vector-library=LIBMVEC \ -mllvm -inline-threshold=1000 FOPTIMIZE = -O3 -flto -march=znver2 -funroll-loops -Mrecursive \ -mllvm -vector-library=LIBMVEC EXTRA_FFLAGS = -Kieee -fno-finite-math-only #linker flags LDFLAGS = -flto -Wl,-mllvm -Wl,-function-specialize \ -Wl,-mllvm -Wl,-region-vectorize \ -Wl,-mllvm -Wl,-vector-library=LIBMVEC \ -Wl,-mllvm -Wl,-reduce-array-computations=3 #libraries EXTRA_LIBS = -fopenmp=libomp -lomp -lpthread -ldl -lmvec -lamdlibm -ljemalloc -lflang -lm EXTRA_OPTIMIZE = -DSPEC_OPENMP -fopenmp -Wno-return-type -DUSE_OPENMP EXTRA_FLIBS = -lmvec -lamdlibm -lm MATHLIBOPT = -lmvec -lamdlibm -lm feedback = 0 PASS1_CFLAGS = -fprofile-instr-generate PASS2_CFLAGS = -fprofile-instr-use PASS1_FFLAGS = -fprofile-generate PASS2_FFLAGS = -fprofile-use PASS1_CXXFLAGS = -fprofile-instr-generate PASS2_CXXFLAGS = -fprofile-instr-use PASS1_LDFLAGS = -fprofile-instr-generate PASS2_LDFLAGS = -fprofile-instr-use fdo_run1 = $command ; llvm-profdata merge -output=default.profdata *.profraw ######################################## # Benchmark specific peak tuning flags # ######################################## 600.perlbench_s=peak: #lang='C' feedback = 1 602.gcc_s=peak: #lang='C' EXTRA_COPTIMIZE = -fgnu89-inline LDOPTIMIZE = -z muldefs EXTRA_LIBS = -fopenmp=libomp -lomp -lpthread -ldl -lm -ljemalloc MATHLIBOPT = -lm 623.xalancbmk_s=peak: #lang='CXX` EXTRA_PORTABILITY = -D_FILE_OFFSET_BITS=64 CXX = clang++ -m32 CXXLD = clang++ -m32 EXTRA_LIBS = -L$[OMP_LIB32_PATH] -fopenmp=libomp -L$[OMP_LIB32_PATH] -lomp -lpthread -ldl -L$[JEMALLOC_LIB32_PATH] -ljemalloc MATHLIBOPT = -lm ENV_OMP_STACKSIZE = 128M 625.x264_s=peak: #lang='C' feedback = 1 654.roms_s=peak: LDFFLAGS = -Wl,-mllvm -Wl,-enable-X86-prefetching # The following settings were obtained by running the sysinfo_program # 'specperl $[top]/bin/sysinfo' (sysinfo:SHA:1b187da62efa5d65f0e989c214b6a257d16a31d3cf135973c9043da741052207) default: notes_plat_sysinfo_000 = notes_plat_sysinfo_005 = Sysinfo program /mnt/ramdisk/cpu2017-1.1.0/bin/sysinfo notes_plat_sysinfo_010 = Rev: r6365 of 2019-08-21 295195f888a3d7edb1e6e46a485a0011 notes_plat_sysinfo_015 = running on linux-g3ob Tue Dec 3 08:31:49 2019 notes_plat_sysinfo_020 = notes_plat_sysinfo_025 = SUT (System Under Test) info as seen by some common utilities. notes_plat_sysinfo_030 = For more information on this section, see notes_plat_sysinfo_035 = https://www.spec.org/cpu2017/Docs/config.html#sysinfo notes_plat_sysinfo_040 = notes_plat_sysinfo_045 = From /proc/cpuinfo notes_plat_sysinfo_050 = model name : AMD EPYC 7532 32-Core Processor notes_plat_sysinfo_055 = 2 "physical id"s (chips) notes_plat_sysinfo_060 = 128 "processors" notes_plat_sysinfo_065 = cores, siblings (Caution: counting these is hw and system dependent. The following notes_plat_sysinfo_070 = excerpts from /proc/cpuinfo might not be reliable. Use with caution.) notes_plat_sysinfo_075 = cpu cores : 32 notes_plat_sysinfo_080 = siblings : 64 notes_plat_sysinfo_085 = physical 0: cores 0 1 4 5 8 9 12 13 16 17 20 21 24 25 28 29 32 33 36 37 40 41 44 45 notes_plat_sysinfo_090 = 48 49 52 53 56 57 60 61 notes_plat_sysinfo_095 = physical 1: cores 0 1 4 5 8 9 12 13 16 17 20 21 24 25 28 29 32 33 36 37 40 41 44 45 notes_plat_sysinfo_100 = 48 49 52 53 56 57 60 61 notes_plat_sysinfo_105 = notes_plat_sysinfo_110 = From lscpu: notes_plat_sysinfo_115 = Architecture: x86_64 notes_plat_sysinfo_120 = CPU op-mode(s): 32-bit, 64-bit notes_plat_sysinfo_125 = Byte Order: Little Endian notes_plat_sysinfo_130 = Address sizes: 43 bits physical, 48 bits virtual notes_plat_sysinfo_135 = CPU(s): 128 notes_plat_sysinfo_140 = On-line CPU(s) list: 0-127 notes_plat_sysinfo_145 = Thread(s) per core: 2 notes_plat_sysinfo_150 = Core(s) per socket: 32 notes_plat_sysinfo_155 = Socket(s): 2 notes_plat_sysinfo_160 = NUMA node(s): 32 notes_plat_sysinfo_165 = Vendor ID: AuthenticAMD notes_plat_sysinfo_170 = CPU family: 23 notes_plat_sysinfo_175 = Model: 49 notes_plat_sysinfo_180 = Model name: AMD EPYC 7532 32-Core Processor notes_plat_sysinfo_185 = Stepping: 0 notes_plat_sysinfo_190 = CPU MHz: 2395.376 notes_plat_sysinfo_195 = BogoMIPS: 4790.75 notes_plat_sysinfo_200 = Virtualization: AMD-V notes_plat_sysinfo_205 = L1d cache: 32K notes_plat_sysinfo_210 = L1i cache: 32K notes_plat_sysinfo_215 = L2 cache: 512K notes_plat_sysinfo_220 = L3 cache: 16384K notes_plat_sysinfo_225 = NUMA node0 CPU(s): 0,1,64,65 notes_plat_sysinfo_230 = NUMA node1 CPU(s): 2,3,66,67 notes_plat_sysinfo_235 = NUMA node2 CPU(s): 4,5,68,69 notes_plat_sysinfo_240 = NUMA node3 CPU(s): 6,7,70,71 notes_plat_sysinfo_245 = NUMA node4 CPU(s): 8,9,72,73 notes_plat_sysinfo_250 = NUMA node5 CPU(s): 10,11,74,75 notes_plat_sysinfo_255 = NUMA node6 CPU(s): 12,13,76,77 notes_plat_sysinfo_260 = NUMA node7 CPU(s): 14,15,78,79 notes_plat_sysinfo_265 = NUMA node8 CPU(s): 16,17,80,81 notes_plat_sysinfo_270 = NUMA node9 CPU(s): 18,19,82,83 notes_plat_sysinfo_275 = NUMA node10 CPU(s): 20,21,84,85 notes_plat_sysinfo_280 = NUMA node11 CPU(s): 22,23,86,87 notes_plat_sysinfo_285 = NUMA node12 CPU(s): 24,25,88,89 notes_plat_sysinfo_290 = NUMA node13 CPU(s): 26,27,90,91 notes_plat_sysinfo_295 = NUMA node14 CPU(s): 28,29,92,93 notes_plat_sysinfo_300 = NUMA node15 CPU(s): 30,31,94,95 notes_plat_sysinfo_305 = NUMA node16 CPU(s): 32,33,96,97 notes_plat_sysinfo_310 = NUMA node17 CPU(s): 34,35,98,99 notes_plat_sysinfo_315 = NUMA node18 CPU(s): 36,37,100,101 notes_plat_sysinfo_320 = NUMA node19 CPU(s): 38,39,102,103 notes_plat_sysinfo_325 = NUMA node20 CPU(s): 40,41,104,105 notes_plat_sysinfo_330 = NUMA node21 CPU(s): 42,43,106,107 notes_plat_sysinfo_335 = NUMA node22 CPU(s): 44,45,108,109 notes_plat_sysinfo_340 = NUMA node23 CPU(s): 46,47,110,111 notes_plat_sysinfo_345 = NUMA node24 CPU(s): 48,49,112,113 notes_plat_sysinfo_350 = NUMA node25 CPU(s): 50,51,114,115 notes_plat_sysinfo_355 = NUMA node26 CPU(s): 52,53,116,117 notes_plat_sysinfo_360 = NUMA node27 CPU(s): 54,55,118,119 notes_plat_sysinfo_365 = NUMA node28 CPU(s): 56,57,120,121 notes_plat_sysinfo_370 = NUMA node29 CPU(s): 58,59,122,123 notes_plat_sysinfo_375 = NUMA node30 CPU(s): 60,61,124,125 notes_plat_sysinfo_380 = NUMA node31 CPU(s): 62,63,126,127 notes_plat_sysinfo_385 = Flags: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov notes_plat_sysinfo_390 = pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt pdpe1gb rdtscp lm notes_plat_sysinfo_395 = constant_tsc rep_good nopl xtopology nonstop_tsc cpuid extd_apicid aperfmperf pni notes_plat_sysinfo_400 = pclmulqdq monitor ssse3 fma cx16 sse4_1 sse4_2 movbe popcnt aes xsave avx f16c notes_plat_sysinfo_405 = rdrand lahf_lm cmp_legacy svm extapic cr8_legacy abm sse4a misalignsse 3dnowprefetch notes_plat_sysinfo_410 = osvw ibs skinit wdt tce topoext perfctr_core perfctr_nb bpext perfctr_l2 mwaitx cpb notes_plat_sysinfo_415 = cat_l3 cdp_l3 hw_pstate sme ssbd sev ibrs ibpb stibp vmmcall fsgsbase bmi1 avx2 smep notes_plat_sysinfo_420 = bmi2 cqm rdt_a rdseed adx smap clflushopt clwb sha_ni xsaveopt xsavec xgetbv1 xsaves notes_plat_sysinfo_425 = cqm_llc cqm_occup_llc cqm_mbm_total cqm_mbm_local clzero irperf xsaveerptr arat npt notes_plat_sysinfo_430 = lbrv svm_lock nrip_save tsc_scale vmcb_clean flushbyasid decodeassists pausefilter notes_plat_sysinfo_435 = pfthreshold avic v_vmsave_vmload vgif umip rdpid overflow_recov succor smca notes_plat_sysinfo_440 = notes_plat_sysinfo_445 = /proc/cpuinfo cache data notes_plat_sysinfo_450 = cache size : 512 KB notes_plat_sysinfo_455 = notes_plat_sysinfo_460 = From numactl --hardware WARNING: a numactl 'node' might or might not correspond to a notes_plat_sysinfo_465 = physical chip. notes_plat_sysinfo_470 = available: 32 nodes (0-31) notes_plat_sysinfo_475 = node 0 cpus: 0 1 64 65 notes_plat_sysinfo_480 = node 0 size: 15676 MB notes_plat_sysinfo_485 = node 0 free: 15625 MB notes_plat_sysinfo_490 = node 1 cpus: 2 3 66 67 notes_plat_sysinfo_495 = node 1 size: 16127 MB notes_plat_sysinfo_500 = node 1 free: 16095 MB notes_plat_sysinfo_505 = node 2 cpus: 4 5 68 69 notes_plat_sysinfo_510 = node 2 size: 16127 MB notes_plat_sysinfo_515 = node 2 free: 16076 MB notes_plat_sysinfo_520 = node 3 cpus: 6 7 70 71 notes_plat_sysinfo_525 = node 3 size: 16126 MB notes_plat_sysinfo_530 = node 3 free: 16095 MB notes_plat_sysinfo_535 = node 4 cpus: 8 9 72 73 notes_plat_sysinfo_540 = node 4 size: 16127 MB notes_plat_sysinfo_545 = node 4 free: 16082 MB notes_plat_sysinfo_550 = node 5 cpus: 10 11 74 75 notes_plat_sysinfo_555 = node 5 size: 16127 MB notes_plat_sysinfo_560 = node 5 free: 16092 MB notes_plat_sysinfo_565 = node 6 cpus: 12 13 76 77 notes_plat_sysinfo_570 = node 6 size: 16127 MB notes_plat_sysinfo_575 = node 6 free: 16092 MB notes_plat_sysinfo_580 = node 7 cpus: 14 15 78 79 notes_plat_sysinfo_585 = node 7 size: 16126 MB notes_plat_sysinfo_590 = node 7 free: 16089 MB notes_plat_sysinfo_595 = node 8 cpus: 16 17 80 81 notes_plat_sysinfo_600 = node 8 size: 16127 MB notes_plat_sysinfo_605 = node 8 free: 16106 MB notes_plat_sysinfo_610 = node 9 cpus: 18 19 82 83 notes_plat_sysinfo_615 = node 9 size: 16097 MB notes_plat_sysinfo_620 = node 9 free: 16076 MB notes_plat_sysinfo_625 = node 10 cpus: 20 21 84 85 notes_plat_sysinfo_630 = node 10 size: 16127 MB notes_plat_sysinfo_635 = node 10 free: 16106 MB notes_plat_sysinfo_640 = node 11 cpus: 22 23 86 87 notes_plat_sysinfo_645 = node 11 size: 16126 MB notes_plat_sysinfo_650 = node 11 free: 16104 MB notes_plat_sysinfo_655 = node 12 cpus: 24 25 88 89 notes_plat_sysinfo_660 = node 12 size: 16127 MB notes_plat_sysinfo_665 = node 12 free: 15956 MB notes_plat_sysinfo_670 = node 13 cpus: 26 27 90 91 notes_plat_sysinfo_675 = node 13 size: 16127 MB notes_plat_sysinfo_680 = node 13 free: 16046 MB notes_plat_sysinfo_685 = node 14 cpus: 28 29 92 93 notes_plat_sysinfo_690 = node 14 size: 16127 MB notes_plat_sysinfo_695 = node 14 free: 16077 MB notes_plat_sysinfo_700 = node 15 cpus: 30 31 94 95 notes_plat_sysinfo_705 = node 15 size: 16114 MB notes_plat_sysinfo_710 = node 15 free: 11863 MB notes_plat_sysinfo_715 = node 16 cpus: 32 33 96 97 notes_plat_sysinfo_720 = node 16 size: 16127 MB notes_plat_sysinfo_725 = node 16 free: 16102 MB notes_plat_sysinfo_730 = node 17 cpus: 34 35 98 99 notes_plat_sysinfo_735 = node 17 size: 16127 MB notes_plat_sysinfo_740 = node 17 free: 16101 MB notes_plat_sysinfo_745 = node 18 cpus: 36 37 100 101 notes_plat_sysinfo_750 = node 18 size: 16127 MB notes_plat_sysinfo_755 = node 18 free: 16107 MB notes_plat_sysinfo_760 = node 19 cpus: 38 39 102 103 notes_plat_sysinfo_765 = node 19 size: 16126 MB notes_plat_sysinfo_770 = node 19 free: 16104 MB notes_plat_sysinfo_775 = node 20 cpus: 40 41 104 105 notes_plat_sysinfo_780 = node 20 size: 16127 MB notes_plat_sysinfo_785 = node 20 free: 16105 MB notes_plat_sysinfo_790 = node 21 cpus: 42 43 106 107 notes_plat_sysinfo_795 = node 21 size: 16127 MB notes_plat_sysinfo_800 = node 21 free: 16106 MB notes_plat_sysinfo_805 = node 22 cpus: 44 45 108 109 notes_plat_sysinfo_810 = node 22 size: 16127 MB notes_plat_sysinfo_815 = node 22 free: 16107 MB notes_plat_sysinfo_820 = node 23 cpus: 46 47 110 111 notes_plat_sysinfo_825 = node 23 size: 16126 MB notes_plat_sysinfo_830 = node 23 free: 16105 MB notes_plat_sysinfo_835 = node 24 cpus: 48 49 112 113 notes_plat_sysinfo_840 = node 24 size: 16127 MB notes_plat_sysinfo_845 = node 24 free: 16101 MB notes_plat_sysinfo_850 = node 25 cpus: 50 51 114 115 notes_plat_sysinfo_855 = node 25 size: 16127 MB notes_plat_sysinfo_860 = node 25 free: 16106 MB notes_plat_sysinfo_865 = node 26 cpus: 52 53 116 117 notes_plat_sysinfo_870 = node 26 size: 16127 MB notes_plat_sysinfo_875 = node 26 free: 16106 MB notes_plat_sysinfo_880 = node 27 cpus: 54 55 118 119 notes_plat_sysinfo_885 = node 27 size: 16126 MB notes_plat_sysinfo_890 = node 27 free: 16105 MB notes_plat_sysinfo_895 = node 28 cpus: 56 57 120 121 notes_plat_sysinfo_900 = node 28 size: 16127 MB notes_plat_sysinfo_905 = node 28 free: 16106 MB notes_plat_sysinfo_910 = node 29 cpus: 58 59 122 123 notes_plat_sysinfo_915 = node 29 size: 16127 MB notes_plat_sysinfo_920 = node 29 free: 16107 MB notes_plat_sysinfo_925 = node 30 cpus: 60 61 124 125 notes_plat_sysinfo_930 = node 30 size: 16127 MB notes_plat_sysinfo_935 = node 30 free: 16107 MB notes_plat_sysinfo_940 = node 31 cpus: 62 63 126 127 notes_plat_sysinfo_945 = node 31 size: 16124 MB notes_plat_sysinfo_950 = node 31 free: 16103 MB notes_plat_sysinfo_955 = node distances: notes_plat_sysinfo_960 = node 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 notes_plat_sysinfo_965 = 20 21 22 23 24 25 26 27 28 29 30 31 notes_plat_sysinfo_970 = 0: 10 11 11 11 12 12 12 12 12 12 12 12 12 12 12 12 32 32 32 32 notes_plat_sysinfo_975 = 32 32 32 32 32 32 32 32 32 32 32 32 notes_plat_sysinfo_980 = 1: 11 10 11 11 12 12 12 12 12 12 12 12 12 12 12 12 32 32 32 32 notes_plat_sysinfo_985 = 32 32 32 32 32 32 32 32 32 32 32 32 notes_plat_sysinfo_990 = 2: 11 11 10 11 12 12 12 12 12 12 12 12 12 12 12 12 32 32 32 32 notes_plat_sysinfo_995 = 32 32 32 32 32 32 32 32 32 32 32 32 notes_plat_sysinfo_1000 = 3: 11 11 11 10 12 12 12 12 12 12 12 12 12 12 12 12 32 32 32 32 notes_plat_sysinfo_1005 = 32 32 32 32 32 32 32 32 32 32 32 32 notes_plat_sysinfo_1010 = 4: 12 12 12 12 10 11 11 11 12 12 12 12 12 12 12 12 32 32 32 32 notes_plat_sysinfo_1015 = 32 32 32 32 32 32 32 32 32 32 32 32 notes_plat_sysinfo_1020 = 5: 12 12 12 12 11 10 11 11 12 12 12 12 12 12 12 12 32 32 32 32 notes_plat_sysinfo_1025 = 32 32 32 32 32 32 32 32 32 32 32 32 notes_plat_sysinfo_1030 = 6: 12 12 12 12 11 11 10 11 12 12 12 12 12 12 12 12 32 32 32 32 notes_plat_sysinfo_1035 = 32 32 32 32 32 32 32 32 32 32 32 32 notes_plat_sysinfo_1040 = 7: 12 12 12 12 11 11 11 10 12 12 12 12 12 12 12 12 32 32 32 32 notes_plat_sysinfo_1045 = 32 32 32 32 32 32 32 32 32 32 32 32 notes_plat_sysinfo_1050 = 8: 12 12 12 12 12 12 12 12 10 11 11 11 12 12 12 12 32 32 32 32 notes_plat_sysinfo_1055 = 32 32 32 32 32 32 32 32 32 32 32 32 notes_plat_sysinfo_1060 = 9: 12 12 12 12 12 12 12 12 11 10 11 11 12 12 12 12 32 32 32 32 notes_plat_sysinfo_1065 = 32 32 32 32 32 32 32 32 32 32 32 32 notes_plat_sysinfo_1070 = 10: 12 12 12 12 12 12 12 12 11 11 10 11 12 12 12 12 32 32 32 32 notes_plat_sysinfo_1075 = 32 32 32 32 32 32 32 32 32 32 32 32 notes_plat_sysinfo_1080 = 11: 12 12 12 12 12 12 12 12 11 11 11 10 12 12 12 12 32 32 32 32 notes_plat_sysinfo_1085 = 32 32 32 32 32 32 32 32 32 32 32 32 notes_plat_sysinfo_1090 = 12: 12 12 12 12 12 12 12 12 12 12 12 12 10 11 11 11 32 32 32 32 notes_plat_sysinfo_1095 = 32 32 32 32 32 32 32 32 32 32 32 32 notes_plat_sysinfo_1100 = 13: 12 12 12 12 12 12 12 12 12 12 12 12 11 10 11 11 32 32 32 32 notes_plat_sysinfo_1105 = 32 32 32 32 32 32 32 32 32 32 32 32 notes_plat_sysinfo_1110 = 14: 12 12 12 12 12 12 12 12 12 12 12 12 11 11 10 11 32 32 32 32 notes_plat_sysinfo_1115 = 32 32 32 32 32 32 32 32 32 32 32 32 notes_plat_sysinfo_1120 = 15: 12 12 12 12 12 12 12 12 12 12 12 12 11 11 11 10 32 32 32 32 notes_plat_sysinfo_1125 = 32 32 32 32 32 32 32 32 32 32 32 32 notes_plat_sysinfo_1130 = 16: 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 10 11 11 11 notes_plat_sysinfo_1135 = 12 12 12 12 12 12 12 12 12 12 12 12 notes_plat_sysinfo_1140 = 17: 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 11 10 11 11 notes_plat_sysinfo_1145 = 12 12 12 12 12 12 12 12 12 12 12 12 notes_plat_sysinfo_1150 = 18: 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 11 11 10 11 notes_plat_sysinfo_1155 = 12 12 12 12 12 12 12 12 12 12 12 12 notes_plat_sysinfo_1160 = 19: 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 11 11 11 10 notes_plat_sysinfo_1165 = 12 12 12 12 12 12 12 12 12 12 12 12 notes_plat_sysinfo_1170 = 20: 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 12 12 12 12 notes_plat_sysinfo_1175 = 10 11 11 11 12 12 12 12 12 12 12 12 notes_plat_sysinfo_1180 = 21: 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 12 12 12 12 notes_plat_sysinfo_1185 = 11 10 11 11 12 12 12 12 12 12 12 12 notes_plat_sysinfo_1190 = 22: 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 12 12 12 12 notes_plat_sysinfo_1195 = 11 11 10 11 12 12 12 12 12 12 12 12 notes_plat_sysinfo_1200 = 23: 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 12 12 12 12 notes_plat_sysinfo_1205 = 11 11 11 10 12 12 12 12 12 12 12 12 notes_plat_sysinfo_1210 = 24: 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 12 12 12 12 notes_plat_sysinfo_1215 = 12 12 12 12 10 11 11 11 12 12 12 12 notes_plat_sysinfo_1220 = 25: 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 12 12 12 12 notes_plat_sysinfo_1225 = 12 12 12 12 11 10 11 11 12 12 12 12 notes_plat_sysinfo_1230 = 26: 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 12 12 12 12 notes_plat_sysinfo_1235 = 12 12 12 12 11 11 10 11 12 12 12 12 notes_plat_sysinfo_1240 = 27: 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 12 12 12 12 notes_plat_sysinfo_1245 = 12 12 12 12 11 11 11 10 12 12 12 12 notes_plat_sysinfo_1250 = 28: 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 12 12 12 12 notes_plat_sysinfo_1255 = 12 12 12 12 12 12 12 12 10 11 11 11 notes_plat_sysinfo_1260 = 29: 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 12 12 12 12 notes_plat_sysinfo_1265 = 12 12 12 12 12 12 12 12 11 10 11 11 notes_plat_sysinfo_1270 = 30: 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 12 12 12 12 notes_plat_sysinfo_1275 = 12 12 12 12 12 12 12 12 11 11 10 11 notes_plat_sysinfo_1280 = 31: 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 12 12 12 12 notes_plat_sysinfo_1285 = 12 12 12 12 12 12 12 12 11 11 11 10 notes_plat_sysinfo_1290 = notes_plat_sysinfo_1295 = From /proc/meminfo notes_plat_sysinfo_1300 = MemTotal: 527939392 kB notes_plat_sysinfo_1305 = HugePages_Total: 0 notes_plat_sysinfo_1310 = Hugepagesize: 2048 kB notes_plat_sysinfo_1315 = notes_plat_sysinfo_1320 = From /etc/*release* /etc/*version* notes_plat_sysinfo_1325 = os-release: notes_plat_sysinfo_1330 = NAME="SLES" notes_plat_sysinfo_1335 = VERSION="15-SP1" notes_plat_sysinfo_1340 = VERSION_ID="15.1" notes_plat_sysinfo_1345 = PRETTY_NAME="SUSE Linux Enterprise Server 15 SP1" notes_plat_sysinfo_1350 = ID="sles" notes_plat_sysinfo_1355 = ID_LIKE="suse" notes_plat_sysinfo_1360 = ANSI_COLOR="0;32" notes_plat_sysinfo_1365 = CPE_NAME="cpe:/o:suse:sles:15:sp1" notes_plat_sysinfo_1370 = notes_plat_sysinfo_1375 = uname -a: notes_plat_sysinfo_1380 = Linux linux-g3ob 4.12.14-195-default #1 SMP Tue May 7 10:55:11 UTC 2019 (8fba516) notes_plat_sysinfo_1385 = x86_64 x86_64 x86_64 GNU/Linux notes_plat_sysinfo_1390 = notes_plat_sysinfo_1395 = Kernel self-reported vulnerability status: notes_plat_sysinfo_1400 = notes_plat_sysinfo_1405 = CVE-2018-3620 (L1 Terminal Fault): Not affected notes_plat_sysinfo_1410 = Microarchitectural Data Sampling: Not affected notes_plat_sysinfo_1415 = CVE-2017-5754 (Meltdown): Not affected notes_plat_sysinfo_1420 = CVE-2018-3639 (Speculative Store Bypass): Mitigation: Speculative Store Bypass disabled notes_plat_sysinfo_1425 = via prctl and seccomp notes_plat_sysinfo_1430 = CVE-2017-5753 (Spectre variant 1): Mitigation: __user pointer sanitization notes_plat_sysinfo_1435 = CVE-2017-5715 (Spectre variant 2): Mitigation: Full AMD retpoline, IBPB: notes_plat_sysinfo_1440 = conditional, IBRS_FW, STIBP: conditional, RSB notes_plat_sysinfo_1445 = filling notes_plat_sysinfo_1450 = notes_plat_sysinfo_1455 = run-level 3 Dec 2 07:57 last=5 notes_plat_sysinfo_1460 = notes_plat_sysinfo_1465 = SPEC is set to: /mnt/ramdisk/cpu2017-1.1.0 notes_plat_sysinfo_1470 = Filesystem Type Size Used Avail Use% Mounted on notes_plat_sysinfo_1475 = tmpfs tmpfs 140G 4.0G 137G 3% /mnt/ramdisk notes_plat_sysinfo_1480 = notes_plat_sysinfo_1485 = From /sys/devices/virtual/dmi/id notes_plat_sysinfo_1490 = BIOS: Dell Inc. 1.2.6 11/21/2019 notes_plat_sysinfo_1495 = Vendor: Dell Inc. notes_plat_sysinfo_1500 = Product: PowerEdge R7525 notes_plat_sysinfo_1505 = Product Family: PowerEdge notes_plat_sysinfo_1510 = Serial: 1234567 notes_plat_sysinfo_1515 = notes_plat_sysinfo_1520 = Additional information from dmidecode follows. WARNING: Use caution when you interpret notes_plat_sysinfo_1525 = this section. The 'dmidecode' program reads system data which is "intended to allow notes_plat_sysinfo_1530 = hardware to be accurately determined", but the intent may not be met, as there are notes_plat_sysinfo_1535 = frequent changes to hardware, firmware, and the "DMTF SMBIOS" standard. notes_plat_sysinfo_1540 = Memory: notes_plat_sysinfo_1545 = 3x 802C80B3802C 36ASF4G72PZ-3G2E2 32 GB 2 rank 3200 notes_plat_sysinfo_1550 = 1x 802C80B3802C 36ASF4G72PZ-3G2E7 32 GB 2 rank 3200 notes_plat_sysinfo_1555 = 2x 802C8632802C 36ASF4G72PZ-3G2E2 32 GB 2 rank 3200 notes_plat_sysinfo_1560 = 1x 802C869D802C 36ASF4G72PZ-3G2E2 32 GB 2 rank 3200 notes_plat_sysinfo_1565 = 9x 80AD863280AD HMA84GR7CJR4N-XN 32 GB 2 rank 3200 notes_plat_sysinfo_1570 = 16x Not Specified Not Specified notes_plat_sysinfo_1575 = notes_plat_sysinfo_1580 = (End of data from sysinfo program) hw_cpu_name = AMD EPYC 7532 hw_disk = 140 GB add more disk info here hw_memory001 = 503.482 GB fixme: If using DDR4, the format is: hw_memory002 = 'N GB (N x N GB nRxn PC4-nnnnX-X)' hw_nchips = 2 prepared_by = root (is never output, only tags rawfile) sw_file = tmpfs sw_os001 = NAME="SLES" sw_state = Run level 3 (add definition here) # End of settings added by sysinfo_program 657.xz_s: # The following setting was inserted automatically as a result of # post-run basepeak application. basepeak = 1 641.leela_s: # The following setting was inserted automatically as a result of # post-run basepeak application. basepeak = 1