# Invocation command line: # /home/cpu2017-1.1.9-amd-aocc400_znver4_A1/bin/harness/runcpu --power --configfile amd_speed_aocc400_znver4_A1.cfg --tune all --reportable --iterations 3 --runmode speed --tune base:peak --size test:train:refspeed fpspeed # output_root was not used for this run ############################################################################ ################################################################################ # AMD AOCC 400 SPEC CPU 2017 V1.1.9 Speed Configuration File for 64-bit Linux # # File name : amd_speed_aocc400_znver4_A1.cfg # Creation Date : April 16, 2023 # CPU 2017 Version : 1.1.9 # Supported benchmarks : All Speed benchmarks (intspeed, fpspeed) # Compiler name/version : AOCC 4.0.0 # Operating system version : RHEL 8.6 # Supported OS's : Ubuntu 22.04, RHEL 8.6/9, SLE 15 SP4 # Hardware : AMD znver4 (AMD64) # FP Base Pointer Size : 64-bit # FP Peak Pointer Size : 64-bit # INT Base Pointer Size : 64-bit # INT Peak Pointer Size : 64-bit # Auto Parallelization : No # # Note: DO NOT EDIT THIS FILE, the only edits required to properly run these # binaries are made in the ini Python file. Please consult Readme.amd_speed_aocc400_znver4_A1.txt # for a few uncommon exceptions which require edits to this file. # # Description: # # This binary package automates away many of the complexities necessary to set # up and run SPEC CPU 2017 under optimized conditions on AMD znver4-based # server platforms within Linux (AMD64). # # The binary package was built specifically for AMD znver4 microprocessors and # is not intended to run on other products. # # Please install the binary package by following the instructions in # "Readme.amd_speed_aocc400_znver4_A1.txt" under the "How To Use the Binaries" section. # # The binary package is designed to work without alteration on one socket AMD # znver4-based servers with 96 cores, SMT enabled and 768 (64x12) GB of DDR5 # memory distributed evenly among all 12 channels using 64 GiB DIMMs. # # To run the binary package on other znver4 configurations, please review # "Readme.amd_speed_aocc400_znver4_A1.txt". In general, znver4 CPUs # should be autodetected with no action required by the user. # # In most cases, it should be unnecessary to edit "amd_speed_aocc400_znver4_A1.cfg" or any # other file besides "ini_amd_speed_aocc400_znver4_A1.py" where reporting fields # and run conditions are set. # # The run script automatically sets the optimal number of speed copies and binds # them appropriately. # # The run script and accompanying binary package are designed to work on Ubuntu # 22.04, RHEL 8.6/9, and SLE 15 SP4. # # Important! If you write your own run script, please set the stack size to # "unlimited" when executing this binary package. Failure to do so may cause # some benchmarks to overflow the stack. For example, to set stack size within # the bash shell, include the following line somewhere at the top of your run # script before the runcpu invocation: # # ulimit -s unlimited # # Modification of this config file should only be necessary if you intend to # rebuild the binaries. General instructions for rebuilding the binaries are # found in-line below. # ### add power options power_analyzer = WIN:9888 temp_meter = WIN:9889 ################################################################################ # Modifiable macros: ################################################################################ # "allow_build"" switch: # Change the following line to true if you intend to REBUILD the binaries (AMD # does not support this). Valid values are "true" or "false" (no quotes). %define allow_build false # Only change these macros if you are rebuilding the binary package: %define compiler_name aocc400 %define binary_package_name amd_speed_%{compiler_name}_znver4_A %define binary_package_ext %{binary_package_name} %define binary_package_revision 1 %define build_path ${SPEC} %define flags_file_name %{compiler_name}-flags.xml # Do NOT change build_lib_dir after the build or it will trigger a # rebuild of the xalanc. It should also remain literal: %define build_lib_dir amd_speed_aocc400_znver4_A_lib # To enable the platform file, be sure to uncomment the flagsurl02 header line # below in the Header settings. %define platform_file_name INVALID_platform_%{binary_package_name}.xml ################################################################################ # You should never have to change binary_package_full_name: %define binary_package_full_name %{binary_package_name}%{binary_package_revision} ################################################################################ # Include file name ################################################################################ # The include file contains fields that are commonly changed. This file is auto- # generated based upon INI file settings and should not need user modification # for runs. %define inc_file_name %{binary_package_full_name}.inc %define flags_inc_file_name %{binary_package_full_name}_flags.inc # Binary label extension: # Only modify the binary label extension if you plan to rebuild the binaries. # If you plan to recompile these CPU 2017 binaries, please choose a new extension # name below to avoid confusion with the current binary set on your system # under test, and to avoid confusion for SPEC submission reviewers. You will # also need to set "allow_build" to true above. Finally, you must modify the # Paths section below to point to your library locations if the paths are not # already set up in your build environment. # Note that AMD calls an external script to set up the compiler and library # paths before initiating the build. %define ext %{binary_package_ext} ################################################################################ # Paths and Environment Variables # ** MODIFY AS NEEDED (modification should not be necessary for runs) ** ################################################################################ # Allow environment variables to be set before runs: preenv = 1 # retain:true is necessary to avoid gcc out-of-memory exceptions on certain SUTs: # oversize_threshold is required to support jemalloc 5.2.x+ preENV_MALLOC_CONF = oversize_threshold:0,retain:true preENV_LIBOMP_NUM_HIDDEN_HELPER_THREADS = 0 # OpenMP environment variables: preENV_OMP_SCHEDULE = static preENV_OMP_DYNAMIC = false preENV_OMP_STACKSIZE = 128M # Define the name of the directory that holds AMD library files: %define lib_dir %{binary_package_name}_lib # Set the shared object library path for runs and builds: preENV_LD_LIBRARY_PATH = $[top]/%{lib_dir}/lib:%{ENV_LD_LIBRARY_PATH} %if '%{allow_build}' eq 'false' # The include file is only needed for runs, but not for builds. # include: %{inc_file_name} # ----- Begin inclusion of 'amd_speed_aocc400_znver4_A1.inc' ############################################################################ ################################################################################ ################################################################################ # File name: amd_speed_aocc400_znver4_A1.inc # File generation code date: October 11, 2022 # File generation date/time: May 18, 2023 / 18:24:27 # # This file is automatically generated during a SPEC CPU2017 run. # # To modify inc file generation, please consult the readme file or the run # script. ################################################################################ ################################################################################ ################################################################################ ################################################################################ # The following macros are generated for use in the cfg file. ################################################################################ ################################################################################ %define logical_core_count 512 %define physical_core_count 256 %define physical_core_max 255 %define logical_core_max 511 ################################################################################ ################################################################################ # The following inc blocks set the speed thread counts and affinity settings. # # intspeed benchmarks: 600.perlbench_s,602.gcc_s,605.mcf_s,620.omnetpp_s, # 623.xalancbmk_s,625.x264_s,631.deepsjeng_s,641.leela_s,648.exchange2_s, # 657.xz_s # fpspeed benchmarks: 603.bwaves_s,607.cactuBSSN_s,619.lbm_s,621.wrf_s, # 627.cam4_s,628.pop2_s,638.imagick_s,644.nab_s,649.fotonik3d_s, # 654.roms_s # # Selected thread counts from '9754' section of CPU info ################################################################################ # default preENV thread settings: default: preENV_OMP_THREAD_LIMIT = 512 preENV_GOMP_CPU_AFFINITY = 0-511 ################################################################################ ################################################################################ # intspeed base thread counts: intspeed=base: threads = 256 ENV_GOMP_CPU_AFFINITY = 0-255 bind0 = numactl --physcpubind=0-255 submit = echo "$command" > run.sh ; $BIND bash run.sh ################################################################################ ################################################################################ # fpspeed base thread counts: fpspeed=base: threads = 256 ENV_GOMP_CPU_AFFINITY = 0-255 bind0 = numactl --physcpubind=0-255 submit = echo "$command" > run.sh ; $BIND bash run.sh ################################################################################ ################################################################################ # peak thread counts: 1 600.perlbench_s,602.gcc_s,605.mcf_s,620.omnetpp_s,623.xalancbmk_s,625.x264_s,631.deepsjeng_s,641.leela_s,648.exchange2_s=peak: threads = 1 ENV_GOMP_CPU_AFFINITY = 15 bind0 = numactl --physcpubind=15 submit = echo "$command" > run.sh ; $BIND bash run.sh ################################################################################ ################################################################################ # peak thread counts: 256 603.bwaves_s,619.lbm_s,621.wrf_s,628.pop2_s,649.fotonik3d_s=peak: threads = 256 ENV_GOMP_CPU_AFFINITY = 0-255 bind0 = numactl --physcpubind=0-255 submit = echo "$command" > run.sh ; $BIND bash run.sh ################################################################################ ################################################################################ # peak thread counts: 512 607.cactuBSSN_s,627.cam4_s,638.imagick_s,644.nab_s,657.xz_s=peak: threads = 512 ENV_GOMP_CPU_AFFINITY = 0-511 bind0 = numactl --physcpubind=0-511 submit = echo "$command" > run.sh ; $BIND bash run.sh ################################################################################ ################################################################################ # peak thread counts: 512 654.roms_s=peak: threads = 512 ENV_GOMP_CPU_AFFINITY = 0 256 1 257 2 258 3 259 4 260 5 261 6 262 7 263 8 264 9 265 10 266 11 267 12 268 13 269 14 270 15 271 16 272 17 273 18 274 19 275 20 276 21 277 22 278 23 279 24 280 25 281 26 282 27 283 28 284 29 285 30 286 31 287 32 288 33 289 34 290 35 291 36 292 37 293 38 294 39 295 40 296 41 297 42 298 43 299 44 300 45 301 46 302 47 303 48 304 49 305 50 306 51 307 52 308 53 309 54 310 55 311 56 312 57 313 58 314 59 315 60 316 61 317 62 318 63 319 64 320 65 321 66 322 67 323 68 324 69 325 70 326 71 327 72 328 73 329 74 330 75 331 76 332 77 333 78 334 79 335 80 336 81 337 82 338 83 339 84 340 85 341 86 342 87 343 88 344 89 345 90 346 91 347 92 348 93 349 94 350 95 351 96 352 97 353 98 354 99 355 100 356 101 357 102 358 103 359 104 360 105 361 106 362 107 363 108 364 109 365 110 366 111 367 112 368 113 369 114 370 115 371 116 372 117 373 118 374 119 375 120 376 121 377 122 378 123 379 124 380 125 381 126 382 127 383 128 384 129 385 130 386 131 387 132 388 133 389 134 390 135 391 136 392 137 393 138 394 139 395 140 396 141 397 142 398 143 399 144 400 145 401 146 402 147 403 148 404 149 405 150 406 151 407 152 408 153 409 154 410 155 411 156 412 157 413 158 414 159 415 160 416 161 417 162 418 163 419 164 420 165 421 166 422 167 423 168 424 169 425 170 426 171 427 172 428 173 429 174 430 175 431 176 432 177 433 178 434 179 435 180 436 181 437 182 438 183 439 184 440 185 441 186 442 187 443 188 444 189 445 190 446 191 447 192 448 193 449 194 450 195 451 196 452 197 453 198 454 199 455 200 456 201 457 202 458 203 459 204 460 205 461 206 462 207 463 208 464 209 465 210 466 211 467 212 468 213 469 214 470 215 471 216 472 217 473 218 474 219 475 220 476 221 477 222 478 223 479 224 480 225 481 226 482 227 483 228 484 229 485 230 486 231 487 232 488 233 489 234 490 235 491 236 492 237 493 238 494 239 495 240 496 241 497 242 498 243 499 244 500 245 501 246 502 247 503 248 504 249 505 250 506 251 507 252 508 253 509 254 510 255 511 bind0 = numactl --physcpubind=0-511 submit = echo "$command" > run.sh ; $BIND bash run.sh ################################################################################ ################################################################################ ################################################################################ # Switch back to default: default: ################################################################################ ################################################################################ ################################################################################ # The remainder of this file defines CPU2017 report parameters. ################################################################################ ################################################################################ ################################################################################ # SPEC CPU 2017 report header ################################################################################ license_num =9017 tester =Lenovo Global Technology test_sponsor =Lenovo Global Technology hw_vendor =Lenovo Global Technology hw_temperature_win9889_vendor = Digi International, Inc. hw_temperature_win9889_setup = 50 mm in front of SUT main intake hw_temperature_win9889_serial = W63390099 hw_temperature_win9889_connection = USB hw_power_win9888_vendor = YOKOGAWA, Inc. hw_power_win9888_setup = Connected to PSU1 hw_power_win9888_serial = C3UG05013E hw_power_win9888_met_inst = CNAS hw_power_win9888_connection = Default hw_power_win9888_cal_org = GRG METROLOGY & TEST (BEIJING) CO., LTD. hw_power_win9888_cal_label = J202210116758A-0007 hw_power_win9888_cal_date = 19-Oct-2022 hw_temperature_win9889_model = DigiWATCHPORT_H hw_temperature_win9889_label = WIN:9889 hw_power_win9888_model = YokogawaWT310E hw_power_win9888_label = WIN:9888 hw_model000 =ThinkSystem SR665 V3 hw_model001 =(2.25 GHz, AMD EPYC 9754) #--------- If you install new compilers, edit this section -------------------- sw_compiler =C/C++/Fortran: Version 4.0.0 of AOCC ################################################################################ ################################################################################ # Hardware, firmware and software information ################################################################################ hw_avail =Aug-2023 sw_avail =Nov-2022 hw_cpu_name =AMD EPYC 9754 hw_cpu_nominal_mhz =2250 hw_cpu_max_mhz =3100 hw_ncores =256 hw_nthreadspercore =2 hw_ncpuorder =1,2 chips hw_other =None # Other perf-relevant hw, or "None" fw_bios =Lenovo BIOS Version KAE111J 2.10 released May-2023 sw_base_ptrsize =64-bit hw_pcache =32 KB I + 32 KB D on chip per core hw_scache =1 MB I+D on chip per core hw_tcache000 =256 MB I+D on chip per chip, hw_tcache001 = 16 MB shared / 8 cores hw_ocache =None sw_other =None power_management = BIOS and OS set to balance power and performance test_elevation = 43 hw_line_standard = 220 V / 50 Hz / 1 phase / 3 wires hw_power_provisioning = Line-powered fw_management = Version 2.10 of KAX317G hw_memory_mode = Normal hw_psu = 1 x 1100 W (non-redundant) hw_backplane = 8 x 2.5-inch HDD back plane hw_other_storage = None hw_storage_model = 4XB7A82259 hw_nics = 1 x ThinkSystem Ethernet 4-port Adaptor @ 1 Gb hw_nics_enabled = 4 / 1 hw_nics_connected = 1 @ 1 Gb hw_other_model = 6 x Performance fans ################################################################################ # Notes ################################################################################ # Enter notes_000 through notes_100 here. notes_000 =Binaries were compiled on a system with 2x AMD EPYC 9174F CPU + 1.5TiB Memory using RHEL 8.6 notes_005 = notes_010 =NA: The test sponsor attests, as of date of publication, that CVE-2017-5754 (Meltdown) notes_015 =is mitigated in the system as tested and documented. notes_020 =Yes: The test sponsor attests, as of date of publication, that CVE-2017-5753 (Spectre variant 1) notes_025 =is mitigated in the system as tested and documented. notes_030 =Yes: The test sponsor attests, as of date of publication, that CVE-2017-5715 (Spectre variant 2) notes_035 =is mitigated in the system as tested and documented. notes_submit_000 ='numactl' was used to bind copies to the cores. notes_submit_005 =See the configuration file for details. notes_submit_010 = notes_os_000 ='ulimit -s unlimited' was used to set environment stack size limit notes_os_005 ='ulimit -l 2097152' was used to set environment locked pages in memory limit notes_os_010 = notes_os_015 =runcpu command invoked through numactl i.e.: notes_os_020 =numactl --interleave=all runcpu notes_os_025 = notes_os_030 =To limit dirty cache to 8% of memory, 'sysctl -w vm.dirty_ratio=8' run as root. notes_os_035 =To limit swap usage to minimum necessary, 'sysctl -w vm.swappiness=1' run as root. notes_os_040 =To free node-local memory and avoid remote memory usage, notes_os_045 ='sysctl -w vm.zone_reclaim_mode=1' run as root. notes_os_050 =To clear filesystem caches, 'sync; sysctl -w vm.drop_caches=3' run as root. notes_os_055 =To disable address space layout randomization (ASLR) to reduce run-to-run notes_os_060 =variability, 'sysctl -w kernel.randomize_va_space=0' run as root. notes_os_065 = notes_os_thp_000 =To enable Transparent Hugepages (THP) for all allocations, notes_os_thp_005 ='echo always > /sys/kernel/mm/transparent_hugepage/enabled' and notes_os_thp_010 ='echo always > /sys/kernel/mm/transparent_hugepage/defrag' run as root. notes_comp_000 =The AMD64 AOCC Compiler Suite is available at notes_comp_005 =http://developer.amd.com/amd-aocc/ notes_comp_010 = # notes_jemalloc_000 =jemalloc: configured and built with GCC v4.8.2 in RHEL 7.4 (No options specified) # notes_jemalloc_005 =jemalloc 5.1.0 is available here: # notes_jemalloc_010 =https://github.com/jemalloc/jemalloc/releases/download/5.1.0/jemalloc-5.1.0.tar.bz2 # notes_jemalloc_015 = # sw_other000 =jemalloc: jemalloc memory allocator library v5.1.0 ################################################################################ # The following note fields describe platorm settings. ################################################################################ # example: (edit and uncomment as necessary) # notes_plat_000 =BIOS settings: # notes_plat_002 = TDP: 400 # notes_plat_004 = Determinism Slider set to Power # notes_plat_006 = PPT: 400 # notes_plat_010 = NPS: 4 # notes_plat_011 = Workload Profile = CPU Intensive # notes_plat_012 = TSME = Disabled # notes_plat_014 = SEV Control = Disabled # notes_plat_015 = Fan Speed: Maximum ################################################################################ # The following are custom fields: ################################################################################ # Use custom_fields to enter lines that are not listed here. For example: # notes_plat_100 = Energy Bias set to Max Performance # new_field = Ambient temperature set to 10C ################################################################################ # The following fields must be set here for only Int benchmarks. ################################################################################ intspeed: sw_peak_ptrsize =64-bit notes_os_thp_003 = ################################################################################ # The following fields must be set here for FP benchmarks. ################################################################################ fpspeed: sw_peak_ptrsize =64-bit notes_os_thp_015 =To always enable THP for peak runs of: notes_os_thp_020 =603.bwaves_s, 607.cactuBSSN_s, 619.lbm_s, 627.cam4_s, 628.pop2_s, 638.imagick_s, 644.nab_s, 649.fotonik3d_s: notes_os_thp_025 ='echo madvise > /sys/kernel/mm/transparent_hugepage/enabled; echo always > /sys/kernel/mm/transparent_hugepage/defrag' notes_os_thp_030 =run as root. notes_os_thp_035 =To disable THP for peak runs of 621.wrf_s: notes_os_thp_040 ='echo never > /sys/kernel/mm/transparent_hugepage/enabled; echo always > /sys/kernel/mm/transparent_hugepage/defrag' notes_os_thp_045 =run as root. notes_os_thp_050 =To enable THP only on request for peak runs of 654.roms_s: notes_os_thp_055 ='echo madvise > /sys/kernel/mm/transparent_hugepage/enabled; echo madvise > /sys/kernel/mm/transparent_hugepage/defrag' notes_os_thp_060 =run as root. ################################################################################ # The following fields must be set here or they will be overwritten by sysinfo. ################################################################################ intspeed,fpspeed: hw_disk =1 x 480 GB SATA SSD hw_memory =768 GB (24 x 32 GB 2Rx8 PC5-4800B-R) hw_nchips =2 prepared_by =Lenovo Global Technology sw_file =xfs sw_os000 =SUSE Linux Enterprise Server 15 SP4 sw_os001 =kernel version 5.14.21-150400.22-default sw_state =Run level 3 (multi-user) ################################################################################ # End of inc file ################################################################################ # Switch back to the default block after the include file: default: # ---- End inclusion of '/home/cpu2017-1.1.9-amd-aocc400_znver4_A1/config/amd_speed_aocc400_znver4_A1.inc' # Switch back to default block after the include file: default: fail_build = 1 %elif '%{allow_build}' eq 'true' # If you intend to rebuild, be sure to set the library paths either in the # build script or here: preENV_LIBRARY_PATH = $[top]/%{build_lib_dir}/lib:%{ENV_LIBRARY_PATH} % define build_ncpus 16 # controls number of simultaneous compiles fail_build = 0 makeflags = --jobs=%{build_ncpus} --load-average=%{build_ncpus} %else % error The value of "allow_build" is %{allow_build}, but it can only be "true" or "false". This error was generated %endif ################################################################################ # Enable automated data collection per benchmark ################################################################################ # Data collection is not enabled for reportable runs. # teeout is necessary to get data collection stdout into the logs. Best # practices for the individual data collection items would be to have # them store important output in separate files. Filenames could be # constructed from $SPEC (environment), $lognum (result number from runcpu), # and benchmark name/number. teeout = yes # Run runcpu with '-v 35' (or greater) to log lists of variables which can # be used in substitutions as below. # For CPU2006, change $label to $ext %define data-collection-parameters benchname='$name' benchnum='$num' benchmark='$benchmark' iteration=$iter size='$size' tune='$tune' label='$label' log='$log' lognum='$lognum' from_runcpu='$from_runcpu' %define data-collection-start $[top]/data-collection/data-collection start %{data-collection-parameters} %define data-collection-stop $[top]/data-collection/data-collection stop %{data-collection-parameters} monitor_specrun_wrapper = %{data-collection-start} ; $command ; %{data-collection-stop} ################################################################################ # Header settings ################################################################################ backup_config = 0 # set to 0 if you do not want backup files bench_post_setup = sync # command_add_redirect: If set, the generated ${command} will include # redirection operators (stdout, stderr), which are passed along to the shell # that executes the command. If this variable is not set, specinvoke does the # redirection. command_add_redirect = yes env_vars = yes flagsurl000 = http://www.spec.org/cpu2017/flags/aocc400-flags.xml flagsurl001 = http://www.spec.org/cpu2017/flags/Lenovo-Platform-SPECcpu2017-Flags-V1.2-Bergamo-S.xml #flagsurl02 = $[top]/%{platform_file_name} # label: User defined extension string that tags your binaries & directories: label = %{ext} line_width = 1020 log_line_width = 1020 mean_anyway = yes output_format = all reportable = yes size = test,train,ref teeout = yes teerunout = yes tune = base,peak use_submit_for_speed = yes ################################################################################ # Include the flags file: ################################################################################ #include: %{flags_inc_file_name} # ----- Begin inclusion of 'amd_speed_aocc400_znver4_A1_flags.inc' ############################################################################ ################################################################################ # AMD AOCC 4.0.0 SPEC CPU2017 V1.1.8 Speed Configuration Flags for AMD64 Linux ################################################################################ # Compilers ################################################################################ default: CC = clang -m64 CXX = clang++ -m64 FC = flang -m64 CLD = clang -m64 CXXLD = clang++ -m64 FLD = flang -m64 CC_VERSION_OPTION = --version CXX_VERSION_OPTION = --version FC_VERSION_OPTION = --version ################################################################################ # Portability Flags ################################################################################ default: # data model applies to all benchmarks EXTRA_PORTABILITY = -DSPEC_LP64 # *** Benchmark-specific portability *** # Anything other than the data model is only allowed where a need is proven. # (ordered by last 2 digits of benchmark number) 600.perlbench_s: #lang='C' PORTABILITY = -DSPEC_LINUX_X64 621.wrf_s: #lang='F,C' CPORTABILITY = -DSPEC_CASE_FLAG FPORTABILITY = -Mbyteswapio 623.xalancbmk_s: #lang='CXX' PORTABILITY = -DSPEC_LINUX 627.cam4_s: #lang='F,C' PORTABILITY = -DSPEC_CASE_FLAG 628.pop2_s: #lang='F,C' CPORTABILITY = -DSPEC_CASE_FLAG FPORTABILITY = -Mbyteswapio ################################################################################ # Default libraries and variables ################################################################################ default: # Libraries: EXTRA_LIBS = -fopenmp=libomp \ -lomp \ -lamdalloc \ -lamdlibm \ -lm MATHLIBOPT = #clearing this variable or else SPEC will set it to -lm VECMATHLIB = -fveclib=AMDLIBM # Variables: OPT_ROOT = -march=znver4 \ $(VECMATHLIB) \ -ffast-math \ -fopenmp OPT_ROOT_BASE = -O3 \ $(OPT_ROOT) OPT_ROOT_PEAK = -Ofast \ $(OPT_ROOT) \ -flto THP_ALWAYS = echo always > /sys/kernel/mm/transparent_hugepage/enabled; echo always > /sys/kernel/mm/transparent_hugepage/defrag THP_NEVER = echo never > /sys/kernel/mm/transparent_hugepage/enabled; echo never > /sys/kernel/mm/transparent_hugepage/defrag THP_MADVISE = echo madvise > /sys/kernel/mm/transparent_hugepage/enabled; echo madvise > /sys/kernel/mm/transparent_hugepage/defrag DEFAULT_SUBMIT = echo "$command" > run.sh ; $BIND bash run.sh ############################################################################### # AOCC 4.0.0 workarounds that do not count as PORTABILITY ################################################################################ # The workarounds in this section would not qualify under the SPEC CPU # PORTABILITY rule. # - In peak, they can be set as needed for individual benchmarks. # - In base, individual settings are not allowed; set for whole suite. # Use EXTRA_CFLAGS, EXTRA_CXXFLAGS, and EXTRA_FFLAGS for them. # # See: # https://www.spec.org/cpu2017/Docs/runrules.html#portability # https://www.spec.org/cpu2017/Docs/runrules.html#BaseFlags ####################### # Default workarounds # ####################### default: # Allow unused compile/link arguments without triggering warnings during build: EXTRA_CFLAGS = -Wno-unused-command-line-argument EXTRA_CXXFLAGS = -Wno-unused-command-line-argument EXTRA_FFLAGS = -Wno-unused-command-line-argument LDOPTIONS = -Wno-unused-command-line-argument #################### # Base workarounds # #################### # # *** NONE *** # ############################## # Integer workarounds - base # ############################## intrate=base: # The following is necessary for 602 gcc: EXTRA_LDFLAGS = -z muldefs ######################### # FP workarounds - base # ######################### # # *** NONE *** # #################### # Peak workarounds # #################### # # *** NONE *** # ############################## # Integer workarounds - peak # ############################## 602.gcc_s=peak: #lang='C' EXTRA_LDFLAGS = -z muldefs ##################################### # Floating Point workarounds - peak # ##################################### # # *** NONE *** # ################################################################################ # Tuning Flags ################################################################################ ##################### # Base tuning flags # ##################### default=base: COPTIMIZE = $(OPT_ROOT_BASE) \ -flto \ -fstruct-layout=7 \ -mllvm -unroll-threshold=50 \ -mllvm -inline-threshold=1000 \ -fremap-arrays \ -fstrip-mining \ -mllvm -reduce-array-computations=3 \ -DSPEC_OPENMP \ -Wno-return-type \ -zopt CXXOPTIMIZE = $(OPT_ROOT_BASE) \ -flto \ -mllvm -unroll-threshold=100 \ -finline-aggressive \ -mllvm -loop-unswitch-threshold=200000 \ -mllvm -reduce-array-computations=3 \ -DSPEC_OPENMP \ -zopt FOPTIMIZE = $(OPT_ROOT_BASE) \ -flto \ -Mrecursive \ -funroll-loops \ -mllvm -lsr-in-nested-loop \ -mllvm -reduce-array-computations=3 \ -DSPEC_OPENMP \ -zopt LDCXXFLAGS = -Wl,-mllvm -Wl,-x86-use-vzeroupper=false LDFLAGS = -Wl,-mllvm -Wl,-align-all-nofallthru-blocks=6 \ -Wl,-mllvm -Wl,-reduce-array-computations=3 LDFFLAGS = -Wl,-mllvm -Wl,-enable-X86-prefetching #other libraries # Put OpenMP and math libraries here: # -lm needed at the end for some transcendental functions: EXTRA_LIBS = -fopenmp=libomp \ -lomp \ -lamdlibm \ -lamdalloc \ -lflang \ -lm EXTRA_FLIBS = # Don't put the AMD and mvec math libraries in MATHLIBOPT because it will trigger a reporting issue # because GCC won't use them. Forcefeed all benchmarks the math libraries in EXTRA_LIBS and clear # out MATHLIBOPT. MATHLIBOPT = ######################### # intspeed tuning flags # ######################### intspeed: FOPTIMIZE = $(OPT_ROOT_BASE) \ -flto \ -mllvm -optimize-strided-mem-cost EXTRA_FFLAGS = -mllvm -unroll-aggressive \ -mllvm -unroll-threshold=150 EXTRA_CXXFLAGS = -fvirtual-function-elimination \ -fvisibility=hidden LDFLAGS = -Wl,-mllvm -Wl,-align-all-nofallthru-blocks=6 \ -Wl,-mllvm -Wl,-reduce-array-computations=3 LDCFLAGS = -Wl,-allow-multiple-definition LDCXXFLAGS = LDFFLAGS = -Wl,-mllvm -Wl,-inline-recursion=4 \ -Wl,-mllvm -Wl,-lsr-in-nested-loop \ -Wl,-mllvm -Wl,-enable-iv-split ############################## # intspeed base tuning flags # ############################## intspeed=base: EXTRA_LIBS = -fopenmp=libomp \ -lomp \ -lamdlibm \ -lflang \ -lm EXTRA_CLIBS = -lamdalloc EXTRA_CXXLIBS = -lamdalloc-ext EXTRA_FLIBS = -lamdalloc submit = ${THP_ALWAYS}; ${DEFAULT_SUBMIT} ############################## # intspeed peak tuning flags # ############################## intspeed=peak: submit = ${THP_ALWAYS}; ${DEFAULT_SUBMIT} ############################# # fpspeed base tuning flags # ############################# fpspeed=base: submit = ${THP_ALWAYS}; ${DEFAULT_SUBMIT} ############################# # fpspeed peak tuning flags # ############################# fpspeed=peak: submit = ${THP_ALWAYS}; ${DEFAULT_SUBMIT} ##################### # Peak tuning flags # ##################### default=peak: COPTIMIZE = $(OPT_ROOT_PEAK) -fstruct-layout=9 \ -mllvm -unroll-threshold=50 \ -fremap-arrays \ -fstrip-mining \ -mllvm -inline-threshold=1000 \ -mllvm -reduce-array-computations=3 \ -DSPEC_OPENMP -Wno-return-type \ -zopt CXXOPTIMIZE = $(OPT_ROOT_PEAK) -finline-aggressive \ -mllvm -unroll-threshold=100 \ -mllvm -reduce-array-computations=3 \ -DSPEC_OPENMP \ -zopt FOPTIMIZE = $(OPT_ROOT_PEAK) -Mrecursive \ -mllvm -reduce-array-computations=3 \ -DSPEC_OPENMP \ -zopt LDFLAGS = -Wl,-mllvm -Wl,-align-all-nofallthru-blocks=6 \ -Wl,-mllvm -Wl,-reduce-array-computations=3 LDFFLAGS = -Wl,-mllvm -Wl,-enable-X86-prefetching LDCXXFLAGS = -Wl,-mllvm -Wl,-x86-use-vzeroupper=false EXTRA_LIBS = -fopenmp=libomp \ -lomp \ -lamdlibm \ -lamdalloc \ -lflang \ -lm feedback = 0 PASS1_CFLAGS = -fprofile-instr-generate PASS2_CFLAGS = -fprofile-instr-use PASS1_FFLAGS = -fprofile-generate PASS2_FFLAGS = -fprofile-use PASS1_CXXFLAGS = -fprofile-instr-generate PASS2_CXXFLAGS = -fprofile-instr-use PASS1_LDFLAGS = -fprofile-instr-generate PASS2_LDFLAGS = -fprofile-instr-use fdo_run1 = $command ; llvm-profdata merge --output=default.profdata *.profraw # Benchmark specific peak tuning flags: 603.bwaves_s=peak: #lang='F' FOPTIMIZE = -Ofast \ $(OPT_ROOT) \ -Mrecursive \ -mllvm -reduce-array-computations=3 \ -DSPEC_OPENMP \ -fvector-transform \ -fscalar-transform submit = ${THP_ALWAYS}; ${DEFAULT_SUBMIT} 607.cactuBSSN_s=peak: #lang='CXX,C,F' submit = ${THP_ALWAYS}; ${DEFAULT_SUBMIT} 619.lbm_s=peak: submit = ${THP_ALWAYS}; ${DEFAULT_SUBMIT} 620.omnetpp_s=peak: #lang='CXX' EXTRA_LIBS = -fopenmp=libomp \ -lomp \ -lamdlibm \ -lamdalloc-ext \ -lflang -lm 621.wrf_s=peak: #lang='F,C' FOPTIMIZE = $(OPT_ROOT_BASE) \ -Mrecursive \ -funroll-loops \ -mllvm -lsr-in-nested-loop \ -mllvm -reduce-array-computations=3 \ -DSPEC_OPENMP \ -zopt submit = ${THP_NEVER}; ${DEFAULT_SUBMIT} 623.xalancbmk_s=peak: #lang='CXX' EXTRA_CXXFLAGS = -mllvm -do-block-reorder=aggressive \ -fvirtual-function-elimination -fvisibility=hidden LDFLAGS = -Wl,-mllvm -Wl,-align-all-nofallthru-blocks=6 \ -Wl,-mllvm -Wl,-reduce-array-computations=3 \ -Wl,-mllvm -Wl,-do-block-reorder=aggressive EXTRA_LIBS = -fopenmp=libomp \ -lomp \ -lamdlibm \ -lamdalloc-ext \ -lflang \ -lm 627.cam4_s=peak: #lang='F,C' LDFLAGS = -Wl,-mllvm -Wl,-align-all-nofallthru-blocks=6 \ -Wl,-mllvm -Wl,-reduce-array-computations=3 submit = ${THP_ALWAYS}; ${DEFAULT_SUBMIT} 628.pop2_s=peak: #lang='F,C' FOPTIMIZE = $(OPT_ROOT) \ -Ofast \ -Mrecursive \ -mllvm -reduce-array-computations=3 \ -DSPEC_OPENMP \ -fvector-transform \ -fscalar-transform submit = ${THP_ALWAYS}; ${DEFAULT_SUBMIT} 638.imagick_s=peak: #lang='C' LDFLAGS = -Wl,-mllvm -Wl,-align-all-nofallthru-blocks=6 \ -Wl,-mllvm -Wl,-reduce-array-computations=3 submit = ${THP_ALWAYS}; ${DEFAULT_SUBMIT} 644.nab_s=peak: #lang='C' LDFLAGS = -Wl,-mllvm -Wl,-region-vectorize submit = ${THP_ALWAYS}; ${DEFAULT_SUBMIT} 649.fotonik3d_s=peak: #lang='F' ENV_PGHPF_ZMEM = yes submit = ${THP_ALWAYS}; ${DEFAULT_SUBMIT} 654.roms_s=peak: #lang='F' FOPTIMIZE = -Ofast \ $(OPT_ROOT) \ -Mrecursive \ -mllvm -reduce-array-computations=3 \ -DSPEC_OPENMP \ -fvector-transform \ -fscalar-transform submit = ${THP_MADVISE}; ${DEFAULT_SUBMIT} 657.xz_s=peak: #lang='C' ENV_LIBOMP_NUM_HIDDEN_HELPER_THREADS = 8 # ---- End inclusion of '/home/cpu2017-1.1.9-amd-aocc400_znver4_A1/config/amd_speed_aocc400_znver4_A1_flags.inc' # The following settings were obtained by running the sysinfo_program # 'specperl $[top]/bin/sysinfo' (sysinfo:SHA:2eb381fc1a58eb8122e4a1b875c1e38b3489dac84088192aa0ec6d157b084d06) default: notes_plat_sysinfo_000 = notes_plat_sysinfo_005 = Sysinfo program /home/cpu2017-1.1.9-amd-aocc400_znver4_A1/bin/sysinfo notes_plat_sysinfo_010 = Rev: r6732 of 2022-11-07 fe91c89b7ed5c36ae2c92cc097bec197 notes_plat_sysinfo_015 = running on localhost Thu May 18 18:24:41 2023 notes_plat_sysinfo_020 = notes_plat_sysinfo_025 = SUT (System Under Test) info as seen by some common utilities. notes_plat_sysinfo_030 = notes_plat_sysinfo_035 = ------------------------------------------------------------ notes_plat_sysinfo_040 = Table of contents notes_plat_sysinfo_045 = ------------------------------------------------------------ notes_plat_sysinfo_050 = 1. uname -a notes_plat_sysinfo_055 = 2. w notes_plat_sysinfo_060 = 3. Username notes_plat_sysinfo_065 = 4. ulimit -a notes_plat_sysinfo_070 = 5. sysinfo process ancestry notes_plat_sysinfo_075 = 6. /proc/cpuinfo notes_plat_sysinfo_080 = 7. lscpu notes_plat_sysinfo_085 = 8. numactl --hardware notes_plat_sysinfo_090 = 9. /proc/meminfo notes_plat_sysinfo_095 = 10. who -r notes_plat_sysinfo_100 = 11. Systemd service manager version: systemd 249 (249.11+suse.124.g2bc0b2c447) notes_plat_sysinfo_105 = 12. Services, from systemctl list-unit-files notes_plat_sysinfo_110 = 13. Linux kernel boot-time arguments, from /proc/cmdline notes_plat_sysinfo_115 = 14. cpupower frequency-info notes_plat_sysinfo_120 = 15. tuned-adm active notes_plat_sysinfo_125 = 16. sysctl notes_plat_sysinfo_130 = 17. /sys/kernel/mm/transparent_hugepage notes_plat_sysinfo_135 = 18. /sys/kernel/mm/transparent_hugepage/khugepaged notes_plat_sysinfo_140 = 19. OS release notes_plat_sysinfo_145 = 20. Disk information notes_plat_sysinfo_150 = 21. /sys/devices/virtual/dmi/id notes_plat_sysinfo_155 = 22. dmidecode notes_plat_sysinfo_160 = 23. BIOS notes_plat_sysinfo_165 = ------------------------------------------------------------ notes_plat_sysinfo_170 = notes_plat_sysinfo_175 = ------------------------------------------------------------ notes_plat_sysinfo_180 = 1. uname -a notes_plat_sysinfo_185 = Linux localhost 5.14.21-150400.22-default #1 SMP PREEMPT_DYNAMIC Wed May 11 06:57:18 UTC 2022 (49db222) notes_plat_sysinfo_190 = x86_64 x86_64 x86_64 GNU/Linux notes_plat_sysinfo_195 = notes_plat_sysinfo_200 = ------------------------------------------------------------ notes_plat_sysinfo_205 = 2. w notes_plat_sysinfo_210 = 18:24:41 up 56 min, 1 user, load average: 0.22, 0.26, 14.46 notes_plat_sysinfo_215 = USER TTY FROM LOGIN@ IDLE JCPU PCPU WHAT notes_plat_sysinfo_220 = root tty1 - 17:29 16.00s 2.38s 0.32s /bin/bash ./amd_speed_aocc400_znver4_A1.sh notes_plat_sysinfo_225 = notes_plat_sysinfo_230 = ------------------------------------------------------------ notes_plat_sysinfo_235 = 3. Username notes_plat_sysinfo_240 = From environment variable $USER: root notes_plat_sysinfo_245 = notes_plat_sysinfo_250 = ------------------------------------------------------------ notes_plat_sysinfo_255 = 4. ulimit -a notes_plat_sysinfo_260 = core file size (blocks, -c) unlimited notes_plat_sysinfo_265 = data seg size (kbytes, -d) unlimited notes_plat_sysinfo_270 = scheduling priority (-e) 0 notes_plat_sysinfo_275 = file size (blocks, -f) unlimited notes_plat_sysinfo_280 = pending signals (-i) 3093976 notes_plat_sysinfo_285 = max locked memory (kbytes, -l) 2097152 notes_plat_sysinfo_290 = max memory size (kbytes, -m) unlimited notes_plat_sysinfo_295 = open files (-n) 1024 notes_plat_sysinfo_300 = pipe size (512 bytes, -p) 8 notes_plat_sysinfo_305 = POSIX message queues (bytes, -q) 819200 notes_plat_sysinfo_310 = real-time priority (-r) 0 notes_plat_sysinfo_315 = stack size (kbytes, -s) unlimited notes_plat_sysinfo_320 = cpu time (seconds, -t) unlimited notes_plat_sysinfo_325 = max user processes (-u) 3093976 notes_plat_sysinfo_330 = virtual memory (kbytes, -v) unlimited notes_plat_sysinfo_335 = file locks (-x) unlimited notes_plat_sysinfo_340 = notes_plat_sysinfo_345 = ------------------------------------------------------------ notes_plat_sysinfo_350 = 5. sysinfo process ancestry notes_plat_sysinfo_355 = /usr/lib/systemd/systemd --switched-root --system --deserialize 30 notes_plat_sysinfo_360 = login -- root notes_plat_sysinfo_365 = -bash notes_plat_sysinfo_370 = /bin/bash ./speedfp.sh notes_plat_sysinfo_375 = /bin/bash ./Run036-compliant-amd-speedfp.sh notes_plat_sysinfo_380 = python3 ./run_amd_speed_aocc400_znver4_A1.py notes_plat_sysinfo_385 = /bin/bash ./amd_speed_aocc400_znver4_A1.sh notes_plat_sysinfo_390 = runcpu --power --config amd_speed_aocc400_znver4_A1.cfg --tune all --reportable --iterations 3 fpspeed notes_plat_sysinfo_395 = runcpu --power --configfile amd_speed_aocc400_znver4_A1.cfg --tune all --reportable --iterations 3 --runmode notes_plat_sysinfo_400 = speed --tune base:peak --size test:train:refspeed fpspeed --nopreenv --note-preenv --logfile notes_plat_sysinfo_405 = $SPEC/tmp/CPU2017.062/templogs/preenv.fpspeed.062.0.log --lognum 062.0 --from_runcpu 2 notes_plat_sysinfo_410 = specperl $SPEC/bin/sysinfo notes_plat_sysinfo_415 = $SPEC = /home/cpu2017-1.1.9-amd-aocc400_znver4_A1 notes_plat_sysinfo_420 = notes_plat_sysinfo_425 = ------------------------------------------------------------ notes_plat_sysinfo_430 = 6. /proc/cpuinfo notes_plat_sysinfo_435 = model name : AMD EPYC 9754 128-Core Processor notes_plat_sysinfo_440 = vendor_id : AuthenticAMD notes_plat_sysinfo_445 = cpu family : 25 notes_plat_sysinfo_450 = model : 160 notes_plat_sysinfo_455 = stepping : 2 notes_plat_sysinfo_460 = microcode : 0xaa00208 notes_plat_sysinfo_465 = bugs : sysret_ss_attrs spectre_v1 spectre_v2 spec_store_bypass notes_plat_sysinfo_470 = TLB size : 3584 4K pages notes_plat_sysinfo_475 = cpu cores : 128 notes_plat_sysinfo_480 = siblings : 256 notes_plat_sysinfo_485 = 2 physical ids (chips) notes_plat_sysinfo_490 = 512 processors (hardware threads) notes_plat_sysinfo_495 = physical id 0: core ids 0-127 notes_plat_sysinfo_500 = physical id 1: core ids 0-127 notes_plat_sysinfo_505 = physical id 0: apicids 0-255 notes_plat_sysinfo_510 = physical id 1: apicids 256-511 notes_plat_sysinfo_515 = Caution: /proc/cpuinfo data regarding chips, cores, and threads is not necessarily reliable, especially for notes_plat_sysinfo_520 = virtualized systems. Use the above data carefully. notes_plat_sysinfo_525 = notes_plat_sysinfo_530 = ------------------------------------------------------------ notes_plat_sysinfo_535 = 7. lscpu notes_plat_sysinfo_540 = notes_plat_sysinfo_545 = From lscpu from util-linux 2.37.2: notes_plat_sysinfo_550 = Architecture: x86_64 notes_plat_sysinfo_555 = CPU op-mode(s): 32-bit, 64-bit notes_plat_sysinfo_560 = Address sizes: 52 bits physical, 57 bits virtual notes_plat_sysinfo_565 = Byte Order: Little Endian notes_plat_sysinfo_570 = CPU(s): 512 notes_plat_sysinfo_575 = On-line CPU(s) list: 0-511 notes_plat_sysinfo_580 = Vendor ID: AuthenticAMD notes_plat_sysinfo_585 = Model name: AMD EPYC 9754 128-Core Processor notes_plat_sysinfo_590 = CPU family: 25 notes_plat_sysinfo_595 = Model: 160 notes_plat_sysinfo_600 = Thread(s) per core: 2 notes_plat_sysinfo_605 = Core(s) per socket: 128 notes_plat_sysinfo_610 = Socket(s): 2 notes_plat_sysinfo_615 = Stepping: 2 notes_plat_sysinfo_620 = Frequency boost: disabled notes_plat_sysinfo_625 = CPU max MHz: 3100.3411 notes_plat_sysinfo_630 = CPU min MHz: 1500.0000 notes_plat_sysinfo_635 = BogoMIPS: 4493.42 notes_plat_sysinfo_640 = Flags: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 notes_plat_sysinfo_645 = clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt pdpe1gb rdtscp lm notes_plat_sysinfo_650 = constant_tsc rep_good nopl nonstop_tsc cpuid extd_apicid aperfmperf rapl notes_plat_sysinfo_655 = pni pclmulqdq monitor ssse3 fma cx16 pcid sse4_1 sse4_2 x2apic movbe notes_plat_sysinfo_660 = popcnt aes xsave avx f16c rdrand lahf_lm cmp_legacy svm extapic cr8_legacy notes_plat_sysinfo_665 = abm sse4a misalignsse 3dnowprefetch osvw ibs skinit wdt tce topoext notes_plat_sysinfo_670 = perfctr_core perfctr_nb bpext perfctr_llc mwaitx cpb cat_l3 cdp_l3 notes_plat_sysinfo_675 = invpcid_single hw_pstate ssbd mba ibrs ibpb stibp vmmcall fsgsbase bmi1 notes_plat_sysinfo_680 = avx2 smep bmi2 erms invpcid cqm rdt_a avx512f avx512dq rdseed adx smap notes_plat_sysinfo_685 = avx512ifma clflushopt clwb avx512cd sha_ni avx512bw avx512vl xsaveopt notes_plat_sysinfo_690 = xsavec xgetbv1 xsaves cqm_llc cqm_occup_llc cqm_mbm_total cqm_mbm_local notes_plat_sysinfo_695 = avx512_bf16 clzero irperf xsaveerptr rdpru wbnoinvd amd_ppin arat npt lbrv notes_plat_sysinfo_700 = svm_lock nrip_save tsc_scale vmcb_clean flushbyasid decodeassists notes_plat_sysinfo_705 = pausefilter pfthreshold avic v_vmsave_vmload vgif v_spec_ctrl avx512vbmi notes_plat_sysinfo_710 = umip pku ospke avx512_vbmi2 gfni vaes vpclmulqdq avx512_vnni avx512_bitalg notes_plat_sysinfo_715 = avx512_vpopcntdq la57 rdpid overflow_recov succor smca fsrm flush_l1d notes_plat_sysinfo_720 = Virtualization: AMD-V notes_plat_sysinfo_725 = L1d cache: 8 MiB (256 instances) notes_plat_sysinfo_730 = L1i cache: 8 MiB (256 instances) notes_plat_sysinfo_735 = L2 cache: 256 MiB (256 instances) notes_plat_sysinfo_740 = L3 cache: 512 MiB (32 instances) notes_plat_sysinfo_745 = NUMA node(s): 32 notes_plat_sysinfo_750 = NUMA node0 CPU(s): 0-7,256-263 notes_plat_sysinfo_755 = NUMA node1 CPU(s): 8-15,264-271 notes_plat_sysinfo_760 = NUMA node2 CPU(s): 16-23,272-279 notes_plat_sysinfo_765 = NUMA node3 CPU(s): 24-31,280-287 notes_plat_sysinfo_770 = NUMA node4 CPU(s): 32-39,288-295 notes_plat_sysinfo_775 = NUMA node5 CPU(s): 40-47,296-303 notes_plat_sysinfo_780 = NUMA node6 CPU(s): 48-55,304-311 notes_plat_sysinfo_785 = NUMA node7 CPU(s): 56-63,312-319 notes_plat_sysinfo_790 = NUMA node8 CPU(s): 64-71,320-327 notes_plat_sysinfo_795 = NUMA node9 CPU(s): 72-79,328-335 notes_plat_sysinfo_800 = NUMA node10 CPU(s): 80-87,336-343 notes_plat_sysinfo_805 = NUMA node11 CPU(s): 88-95,344-351 notes_plat_sysinfo_810 = NUMA node12 CPU(s): 96-103,352-359 notes_plat_sysinfo_815 = NUMA node13 CPU(s): 104-111,360-367 notes_plat_sysinfo_820 = NUMA node14 CPU(s): 112-119,368-375 notes_plat_sysinfo_825 = NUMA node15 CPU(s): 120-127,376-383 notes_plat_sysinfo_830 = NUMA node16 CPU(s): 128-135,384-391 notes_plat_sysinfo_835 = NUMA node17 CPU(s): 136-143,392-399 notes_plat_sysinfo_840 = NUMA node18 CPU(s): 144-151,400-407 notes_plat_sysinfo_845 = NUMA node19 CPU(s): 152-159,408-415 notes_plat_sysinfo_850 = NUMA node20 CPU(s): 160-167,416-423 notes_plat_sysinfo_855 = NUMA node21 CPU(s): 168-175,424-431 notes_plat_sysinfo_860 = NUMA node22 CPU(s): 176-183,432-439 notes_plat_sysinfo_865 = NUMA node23 CPU(s): 184-191,440-447 notes_plat_sysinfo_870 = NUMA node24 CPU(s): 192-199,448-455 notes_plat_sysinfo_875 = NUMA node25 CPU(s): 200-207,456-463 notes_plat_sysinfo_880 = NUMA node26 CPU(s): 208-215,464-471 notes_plat_sysinfo_885 = NUMA node27 CPU(s): 216-223,472-479 notes_plat_sysinfo_890 = NUMA node28 CPU(s): 224-231,480-487 notes_plat_sysinfo_895 = NUMA node29 CPU(s): 232-239,488-495 notes_plat_sysinfo_900 = NUMA node30 CPU(s): 240-247,496-503 notes_plat_sysinfo_905 = NUMA node31 CPU(s): 248-255,504-511 notes_plat_sysinfo_910 = Vulnerability Itlb multihit: Not affected notes_plat_sysinfo_915 = Vulnerability L1tf: Not affected notes_plat_sysinfo_920 = Vulnerability Mds: Not affected notes_plat_sysinfo_925 = Vulnerability Meltdown: Not affected notes_plat_sysinfo_930 = Vulnerability Spec store bypass: Mitigation; Speculative Store Bypass disabled via prctl and seccomp notes_plat_sysinfo_935 = Vulnerability Spectre v1: Mitigation; usercopy/swapgs barriers and __user pointer sanitization notes_plat_sysinfo_940 = Vulnerability Spectre v2: Mitigation; Retpolines, IBPB conditional, IBRS_FW, STIBP always-on, RSB notes_plat_sysinfo_945 = filling notes_plat_sysinfo_950 = Vulnerability Srbds: Not affected notes_plat_sysinfo_955 = Vulnerability Tsx async abort: Not affected notes_plat_sysinfo_960 = notes_plat_sysinfo_965 = From lscpu --cache: notes_plat_sysinfo_970 = NAME ONE-SIZE ALL-SIZE WAYS TYPE LEVEL SETS PHY-LINE COHERENCY-SIZE notes_plat_sysinfo_975 = L1d 32K 8M 8 Data 1 64 1 64 notes_plat_sysinfo_980 = L1i 32K 8M 8 Instruction 1 64 1 64 notes_plat_sysinfo_985 = L2 1M 256M 8 Unified 2 2048 1 64 notes_plat_sysinfo_990 = L3 16M 512M 16 Unified 3 16384 1 64 notes_plat_sysinfo_995 = notes_plat_sysinfo_1000= ------------------------------------------------------------ notes_plat_sysinfo_1005= 8. numactl --hardware notes_plat_sysinfo_1010= NOTE: a numactl 'node' might or might not correspond to a physical chip. notes_plat_sysinfo_1015= available: 32 nodes (0-31) notes_plat_sysinfo_1020= node 0 cpus: 0-7,256-263 notes_plat_sysinfo_1025= node 0 size: 23936 MB notes_plat_sysinfo_1030= node 0 free: 23127 MB notes_plat_sysinfo_1035= node 1 cpus: 8-15,264-271 notes_plat_sysinfo_1040= node 1 size: 24187 MB notes_plat_sysinfo_1045= node 1 free: 24002 MB notes_plat_sysinfo_1050= node 2 cpus: 16-23,272-279 notes_plat_sysinfo_1055= node 2 size: 24153 MB notes_plat_sysinfo_1060= node 2 free: 23961 MB notes_plat_sysinfo_1065= node 3 cpus: 24-31,280-287 notes_plat_sysinfo_1070= node 3 size: 24187 MB notes_plat_sysinfo_1075= node 3 free: 24008 MB notes_plat_sysinfo_1080= node 4 cpus: 32-39,288-295 notes_plat_sysinfo_1085= node 4 size: 24187 MB notes_plat_sysinfo_1090= node 4 free: 23989 MB notes_plat_sysinfo_1095= node 5 cpus: 40-47,296-303 notes_plat_sysinfo_1100= node 5 size: 24187 MB notes_plat_sysinfo_1105= node 5 free: 24009 MB notes_plat_sysinfo_1110= node 6 cpus: 48-55,304-311 notes_plat_sysinfo_1115= node 6 size: 24187 MB notes_plat_sysinfo_1120= node 6 free: 23965 MB notes_plat_sysinfo_1125= node 7 cpus: 56-63,312-319 notes_plat_sysinfo_1130= node 7 size: 24187 MB notes_plat_sysinfo_1135= node 7 free: 23970 MB notes_plat_sysinfo_1140= node 8 cpus: 64-71,320-327 notes_plat_sysinfo_1145= node 8 size: 24187 MB notes_plat_sysinfo_1150= node 8 free: 23975 MB notes_plat_sysinfo_1155= node 9 cpus: 72-79,328-335 notes_plat_sysinfo_1160= node 9 size: 24187 MB notes_plat_sysinfo_1165= node 9 free: 23555 MB notes_plat_sysinfo_1170= node 10 cpus: 80-87,336-343 notes_plat_sysinfo_1175= node 10 size: 24187 MB notes_plat_sysinfo_1180= node 10 free: 23955 MB notes_plat_sysinfo_1185= node 11 cpus: 88-95,344-351 notes_plat_sysinfo_1190= node 11 size: 24187 MB notes_plat_sysinfo_1195= node 11 free: 23968 MB notes_plat_sysinfo_1200= node 12 cpus: 96-103,352-359 notes_plat_sysinfo_1205= node 12 size: 24187 MB notes_plat_sysinfo_1210= node 12 free: 23972 MB notes_plat_sysinfo_1215= node 13 cpus: 104-111,360-367 notes_plat_sysinfo_1220= node 13 size: 24187 MB notes_plat_sysinfo_1225= node 13 free: 23993 MB notes_plat_sysinfo_1230= node 14 cpus: 112-119,368-375 notes_plat_sysinfo_1235= node 14 size: 24187 MB notes_plat_sysinfo_1240= node 14 free: 24003 MB notes_plat_sysinfo_1245= node 15 cpus: 120-127,376-383 notes_plat_sysinfo_1250= node 15 size: 24187 MB notes_plat_sysinfo_1255= node 15 free: 24005 MB notes_plat_sysinfo_1260= node 16 cpus: 128-135,384-391 notes_plat_sysinfo_1265= node 16 size: 24187 MB notes_plat_sysinfo_1270= node 16 free: 24019 MB notes_plat_sysinfo_1275= node 17 cpus: 136-143,392-399 notes_plat_sysinfo_1280= node 17 size: 24187 MB notes_plat_sysinfo_1285= node 17 free: 23973 MB notes_plat_sysinfo_1290= node 18 cpus: 144-151,400-407 notes_plat_sysinfo_1295= node 18 size: 24187 MB notes_plat_sysinfo_1300= node 18 free: 24031 MB notes_plat_sysinfo_1305= node 19 cpus: 152-159,408-415 notes_plat_sysinfo_1310= node 19 size: 24187 MB notes_plat_sysinfo_1315= node 19 free: 24028 MB notes_plat_sysinfo_1320= node 20 cpus: 160-167,416-423 notes_plat_sysinfo_1325= node 20 size: 24187 MB notes_plat_sysinfo_1330= node 20 free: 24037 MB notes_plat_sysinfo_1335= node 21 cpus: 168-175,424-431 notes_plat_sysinfo_1340= node 21 size: 24187 MB notes_plat_sysinfo_1345= node 21 free: 24030 MB notes_plat_sysinfo_1350= node 22 cpus: 176-183,432-439 notes_plat_sysinfo_1355= node 22 size: 24187 MB notes_plat_sysinfo_1360= node 22 free: 24038 MB notes_plat_sysinfo_1365= node 23 cpus: 184-191,440-447 notes_plat_sysinfo_1370= node 23 size: 24187 MB notes_plat_sysinfo_1375= node 23 free: 24020 MB notes_plat_sysinfo_1380= node 24 cpus: 192-199,448-455 notes_plat_sysinfo_1385= node 24 size: 24187 MB notes_plat_sysinfo_1390= node 24 free: 24042 MB notes_plat_sysinfo_1395= node 25 cpus: 200-207,456-463 notes_plat_sysinfo_1400= node 25 size: 24187 MB notes_plat_sysinfo_1405= node 25 free: 23958 MB notes_plat_sysinfo_1410= node 26 cpus: 208-215,464-471 notes_plat_sysinfo_1415= node 26 size: 24187 MB notes_plat_sysinfo_1420= node 26 free: 24087 MB notes_plat_sysinfo_1425= node 27 cpus: 216-223,472-479 notes_plat_sysinfo_1430= node 27 size: 23979 MB notes_plat_sysinfo_1435= node 27 free: 23753 MB notes_plat_sysinfo_1440= node 28 cpus: 224-231,480-487 notes_plat_sysinfo_1445= node 28 size: 24187 MB notes_plat_sysinfo_1450= node 28 free: 23917 MB notes_plat_sysinfo_1455= node 29 cpus: 232-239,488-495 notes_plat_sysinfo_1460= node 29 size: 24187 MB notes_plat_sysinfo_1465= node 29 free: 24045 MB notes_plat_sysinfo_1470= node 30 cpus: 240-247,496-503 notes_plat_sysinfo_1475= node 30 size: 24187 MB notes_plat_sysinfo_1480= node 30 free: 24008 MB notes_plat_sysinfo_1485= node 31 cpus: 248-255,504-511 notes_plat_sysinfo_1490= node 31 size: 24187 MB notes_plat_sysinfo_1495= node 31 free: 23989 MB notes_plat_sysinfo_1500= node distances: notes_plat_sysinfo_1505= node 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 notes_plat_sysinfo_1510= 25 26 27 28 29 30 31 notes_plat_sysinfo_1515= 0: 10 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 32 32 32 32 32 32 32 32 32 notes_plat_sysinfo_1520= 32 32 32 32 32 32 32 notes_plat_sysinfo_1525= 1: 11 10 11 11 11 11 11 11 11 11 11 11 11 11 11 11 32 32 32 32 32 32 32 32 32 notes_plat_sysinfo_1530= 32 32 32 32 32 32 32 notes_plat_sysinfo_1535= 2: 11 11 10 11 11 11 11 11 11 11 11 11 11 11 11 11 32 32 32 32 32 32 32 32 32 notes_plat_sysinfo_1540= 32 32 32 32 32 32 32 notes_plat_sysinfo_1545= 3: 11 11 11 10 11 11 11 11 11 11 11 11 11 11 11 11 32 32 32 32 32 32 32 32 32 notes_plat_sysinfo_1550= 32 32 32 32 32 32 32 notes_plat_sysinfo_1555= 4: 11 11 11 11 10 11 11 11 11 11 11 11 11 11 11 11 32 32 32 32 32 32 32 32 32 notes_plat_sysinfo_1560= 32 32 32 32 32 32 32 notes_plat_sysinfo_1565= 5: 11 11 11 11 11 10 11 11 11 11 11 11 11 11 11 11 32 32 32 32 32 32 32 32 32 notes_plat_sysinfo_1570= 32 32 32 32 32 32 32 notes_plat_sysinfo_1575= 6: 11 11 11 11 11 11 10 11 11 11 11 11 11 11 11 11 32 32 32 32 32 32 32 32 32 notes_plat_sysinfo_1580= 32 32 32 32 32 32 32 notes_plat_sysinfo_1585= 7: 11 11 11 11 11 11 11 10 11 11 11 11 11 11 11 11 32 32 32 32 32 32 32 32 32 notes_plat_sysinfo_1590= 32 32 32 32 32 32 32 notes_plat_sysinfo_1595= 8: 11 11 11 11 11 11 11 11 10 11 11 11 11 11 11 11 32 32 32 32 32 32 32 32 32 notes_plat_sysinfo_1600= 32 32 32 32 32 32 32 notes_plat_sysinfo_1605= 9: 11 11 11 11 11 11 11 11 11 10 11 11 11 11 11 11 32 32 32 32 32 32 32 32 32 notes_plat_sysinfo_1610= 32 32 32 32 32 32 32 notes_plat_sysinfo_1615= 10: 11 11 11 11 11 11 11 11 11 11 10 11 11 11 11 11 32 32 32 32 32 32 32 32 32 notes_plat_sysinfo_1620= 32 32 32 32 32 32 32 notes_plat_sysinfo_1625= 11: 11 11 11 11 11 11 11 11 11 11 11 10 11 11 11 11 32 32 32 32 32 32 32 32 32 notes_plat_sysinfo_1630= 32 32 32 32 32 32 32 notes_plat_sysinfo_1635= 12: 11 11 11 11 11 11 11 11 11 11 11 11 10 11 11 11 32 32 32 32 32 32 32 32 32 notes_plat_sysinfo_1640= 32 32 32 32 32 32 32 notes_plat_sysinfo_1645= 13: 11 11 11 11 11 11 11 11 11 11 11 11 11 10 11 11 32 32 32 32 32 32 32 32 32 notes_plat_sysinfo_1650= 32 32 32 32 32 32 32 notes_plat_sysinfo_1655= 14: 11 11 11 11 11 11 11 11 11 11 11 11 11 11 10 11 32 32 32 32 32 32 32 32 32 notes_plat_sysinfo_1660= 32 32 32 32 32 32 32 notes_plat_sysinfo_1665= 15: 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 10 32 32 32 32 32 32 32 32 32 notes_plat_sysinfo_1670= 32 32 32 32 32 32 32 notes_plat_sysinfo_1675= 16: 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 10 11 11 11 11 11 11 11 11 notes_plat_sysinfo_1680= 11 11 11 11 11 11 11 notes_plat_sysinfo_1685= 17: 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 11 10 11 11 11 11 11 11 11 notes_plat_sysinfo_1690= 11 11 11 11 11 11 11 notes_plat_sysinfo_1695= 18: 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 11 11 10 11 11 11 11 11 11 notes_plat_sysinfo_1700= 11 11 11 11 11 11 11 notes_plat_sysinfo_1705= 19: 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 11 11 11 10 11 11 11 11 11 notes_plat_sysinfo_1710= 11 11 11 11 11 11 11 notes_plat_sysinfo_1715= 20: 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 11 11 11 11 10 11 11 11 11 notes_plat_sysinfo_1720= 11 11 11 11 11 11 11 notes_plat_sysinfo_1725= 21: 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 11 11 11 11 11 10 11 11 11 notes_plat_sysinfo_1730= 11 11 11 11 11 11 11 notes_plat_sysinfo_1735= 22: 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 11 11 11 11 11 11 10 11 11 notes_plat_sysinfo_1740= 11 11 11 11 11 11 11 notes_plat_sysinfo_1745= 23: 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 11 11 11 11 11 11 11 10 11 notes_plat_sysinfo_1750= 11 11 11 11 11 11 11 notes_plat_sysinfo_1755= 24: 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 11 11 11 11 11 11 11 11 10 notes_plat_sysinfo_1760= 11 11 11 11 11 11 11 notes_plat_sysinfo_1765= 25: 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 11 11 11 11 11 11 11 11 11 notes_plat_sysinfo_1770= 10 11 11 11 11 11 11 notes_plat_sysinfo_1775= 26: 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 11 11 11 11 11 11 11 11 11 notes_plat_sysinfo_1780= 11 10 11 11 11 11 11 notes_plat_sysinfo_1785= 27: 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 11 11 11 11 11 11 11 11 11 notes_plat_sysinfo_1790= 11 11 10 11 11 11 11 notes_plat_sysinfo_1795= 28: 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 11 11 11 11 11 11 11 11 11 notes_plat_sysinfo_1800= 11 11 11 10 11 11 11 notes_plat_sysinfo_1805= 29: 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 11 11 11 11 11 11 11 11 11 notes_plat_sysinfo_1810= 11 11 11 11 10 11 11 notes_plat_sysinfo_1815= 30: 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 11 11 11 11 11 11 11 11 11 notes_plat_sysinfo_1820= 11 11 11 11 11 10 11 notes_plat_sysinfo_1825= 31: 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 11 11 11 11 11 11 11 11 11 notes_plat_sysinfo_1830= 11 11 11 11 11 11 10 notes_plat_sysinfo_1835= notes_plat_sysinfo_1840= ------------------------------------------------------------ notes_plat_sysinfo_1845= 9. /proc/meminfo notes_plat_sysinfo_1850= MemTotal: 792082580 kB notes_plat_sysinfo_1855= notes_plat_sysinfo_1860= ------------------------------------------------------------ notes_plat_sysinfo_1865= 10. who -r notes_plat_sysinfo_1870= run-level 3 May 18 17:29 notes_plat_sysinfo_1875= notes_plat_sysinfo_1880= ------------------------------------------------------------ notes_plat_sysinfo_1885= 11. Systemd service manager version: systemd 249 (249.11+suse.124.g2bc0b2c447) notes_plat_sysinfo_1890= Default Target Status notes_plat_sysinfo_1895= multi-user running notes_plat_sysinfo_1900= notes_plat_sysinfo_1905= ------------------------------------------------------------ notes_plat_sysinfo_1910= 12. Services, from systemctl list-unit-files notes_plat_sysinfo_1915= STATE UNIT FILES notes_plat_sysinfo_1920= enabled YaST2-Firstboot YaST2-Second-Stage apparmor auditd cron getty@ haveged irqbalance notes_plat_sysinfo_1925= issue-generator kbdsettings klog lvm2-monitor nscd postfix purge-kernels rollback rsyslog notes_plat_sysinfo_1930= smartd sshd wicked wickedd-auto4 wickedd-dhcp4 wickedd-dhcp6 wickedd-nanny notes_plat_sysinfo_1935= enabled-runtime systemd-remount-fs notes_plat_sysinfo_1940= disabled autofs autoyast-initscripts blk-availability boot-sysctl ca-certificates chrony-wait notes_plat_sysinfo_1945= chronyd console-getty cups cups-browsed debug-shell ebtables exchange-bmc-os-info notes_plat_sysinfo_1950= firewalld gpm grub2-once haveged-switch-root hwloc-dump-hwdata ipmi ipmievd notes_plat_sysinfo_1955= issue-add-ssh-keys kexec-load lunmask man-db-create multipathd nfs nfs-blkmap rdisc notes_plat_sysinfo_1960= rpcbind rpmconfigcheck rsyncd serial-getty@ smartd_generate_opts snmpd snmptrapd notes_plat_sysinfo_1965= systemd-boot-check-no-failures systemd-network-generator systemd-sysext notes_plat_sysinfo_1970= systemd-time-wait-sync systemd-timesyncd tuned udisks2 notes_plat_sysinfo_1975= indirect wickedd notes_plat_sysinfo_1980= notes_plat_sysinfo_1985= ------------------------------------------------------------ notes_plat_sysinfo_1990= 13. Linux kernel boot-time arguments, from /proc/cmdline notes_plat_sysinfo_1995= BOOT_IMAGE=/boot/vmlinuz-5.14.21-150400.22-default notes_plat_sysinfo_2000= root=UUID=a318787d-19c7-4838-85d1-48f29c075c16 notes_plat_sysinfo_2005= splash=silent notes_plat_sysinfo_2010= mitigations=auto notes_plat_sysinfo_2015= quiet notes_plat_sysinfo_2020= security=apparmor notes_plat_sysinfo_2025= notes_plat_sysinfo_2030= ------------------------------------------------------------ notes_plat_sysinfo_2035= 14. cpupower frequency-info notes_plat_sysinfo_2040= analyzing CPU 0: notes_plat_sysinfo_2045= current policy: frequency should be within 1.50 GHz and 2.25 GHz. notes_plat_sysinfo_2050= The governor "performance" may decide which speed to use notes_plat_sysinfo_2055= within this range. notes_plat_sysinfo_2060= boost state support: notes_plat_sysinfo_2065= Supported: no notes_plat_sysinfo_2070= Active: no notes_plat_sysinfo_2075= notes_plat_sysinfo_2080= ------------------------------------------------------------ notes_plat_sysinfo_2085= 15. tuned-adm active notes_plat_sysinfo_2090= It seems that tuned daemon is not running, preset profile is not activated. notes_plat_sysinfo_2095= Preset profile: throughput-performance notes_plat_sysinfo_2100= notes_plat_sysinfo_2105= ------------------------------------------------------------ notes_plat_sysinfo_2110= 16. sysctl notes_plat_sysinfo_2115= kernel.numa_balancing 1 notes_plat_sysinfo_2120= kernel.randomize_va_space 0 notes_plat_sysinfo_2125= vm.compaction_proactiveness 20 notes_plat_sysinfo_2130= vm.dirty_background_bytes 0 notes_plat_sysinfo_2135= vm.dirty_background_ratio 10 notes_plat_sysinfo_2140= vm.dirty_bytes 0 notes_plat_sysinfo_2145= vm.dirty_expire_centisecs 3000 notes_plat_sysinfo_2150= vm.dirty_ratio 8 notes_plat_sysinfo_2155= vm.dirty_writeback_centisecs 500 notes_plat_sysinfo_2160= vm.dirtytime_expire_seconds 43200 notes_plat_sysinfo_2165= vm.extfrag_threshold 500 notes_plat_sysinfo_2170= vm.min_unmapped_ratio 1 notes_plat_sysinfo_2175= vm.nr_hugepages 0 notes_plat_sysinfo_2180= vm.nr_hugepages_mempolicy 0 notes_plat_sysinfo_2185= vm.nr_overcommit_hugepages 0 notes_plat_sysinfo_2190= vm.swappiness 1 notes_plat_sysinfo_2195= vm.watermark_boost_factor 15000 notes_plat_sysinfo_2200= vm.watermark_scale_factor 10 notes_plat_sysinfo_2205= vm.zone_reclaim_mode 1 notes_plat_sysinfo_2210= notes_plat_sysinfo_2215= ------------------------------------------------------------ notes_plat_sysinfo_2220= 17. /sys/kernel/mm/transparent_hugepage notes_plat_sysinfo_2225= defrag [always] defer defer+madvise madvise never notes_plat_sysinfo_2230= enabled [always] madvise never notes_plat_sysinfo_2235= hpage_pmd_size 2097152 notes_plat_sysinfo_2240= shmem_enabled always within_size advise [never] deny force notes_plat_sysinfo_2245= notes_plat_sysinfo_2250= ------------------------------------------------------------ notes_plat_sysinfo_2255= 18. /sys/kernel/mm/transparent_hugepage/khugepaged notes_plat_sysinfo_2260= alloc_sleep_millisecs 60000 notes_plat_sysinfo_2265= defrag 1 notes_plat_sysinfo_2270= max_ptes_none 511 notes_plat_sysinfo_2275= max_ptes_shared 256 notes_plat_sysinfo_2280= max_ptes_swap 64 notes_plat_sysinfo_2285= pages_to_scan 4096 notes_plat_sysinfo_2290= scan_sleep_millisecs 10000 notes_plat_sysinfo_2295= notes_plat_sysinfo_2300= ------------------------------------------------------------ notes_plat_sysinfo_2305= 19. OS release notes_plat_sysinfo_2310= From /etc/*-release /etc/*-version notes_plat_sysinfo_2315= os-release SUSE Linux Enterprise Server 15 SP4 notes_plat_sysinfo_2320= notes_plat_sysinfo_2325= ------------------------------------------------------------ notes_plat_sysinfo_2330= 20. Disk information notes_plat_sysinfo_2335= SPEC is set to: /home/cpu2017-1.1.9-amd-aocc400_znver4_A1 notes_plat_sysinfo_2340= Filesystem Type Size Used Avail Use% Mounted on notes_plat_sysinfo_2345= /dev/sda3 xfs 446G 59G 387G 14% / notes_plat_sysinfo_2350= notes_plat_sysinfo_2355= ------------------------------------------------------------ notes_plat_sysinfo_2360= 21. /sys/devices/virtual/dmi/id notes_plat_sysinfo_2365= Vendor: Lenovo notes_plat_sysinfo_2370= Product: ThinkSystem SR665 V3 MB,Genoa,Kauai,DDR5,Kauai,2U notes_plat_sysinfo_2375= Product Family: ThinkSystem notes_plat_sysinfo_2380= Serial: 1234567890 notes_plat_sysinfo_2385= notes_plat_sysinfo_2390= ------------------------------------------------------------ notes_plat_sysinfo_2395= 22. dmidecode notes_plat_sysinfo_2400= Additional information from dmidecode 3.2 follows. WARNING: Use caution when you interpret this section. notes_plat_sysinfo_2405= The 'dmidecode' program reads system data which is "intended to allow hardware to be accurately notes_plat_sysinfo_2410= determined", but the intent may not be met, as there are frequent changes to hardware, firmware, and the notes_plat_sysinfo_2415= "DMTF SMBIOS" standard. notes_plat_sysinfo_2420= Memory: notes_plat_sysinfo_2425= 8x SK Hynix HMCG88AEBRA115N 32 GB 2 rank 4800 notes_plat_sysinfo_2430= 16x SK Hynix HMCG88AEBRA168N 32 GB 2 rank 4800 notes_plat_sysinfo_2435= notes_plat_sysinfo_2440= notes_plat_sysinfo_2445= ------------------------------------------------------------ notes_plat_sysinfo_2450= 23. BIOS notes_plat_sysinfo_2455= (This section combines info from /sys/devices and dmidecode.) notes_plat_sysinfo_2460= BIOS Vendor: Lenovo notes_plat_sysinfo_2465= BIOS Version: KAE111J-2.10 notes_plat_sysinfo_2470= BIOS Date: 05/11/2023 notes_plat_sysinfo_2475= BIOS Revision: 2.10 notes_plat_sysinfo_2480= Firmware Revision: 2.10 hw_cpu_name = AMD EPYC 9754 hw_disk = 446 GB add more disk info here hw_memory001 = 755.389 GB fixme: If using DDR4, the format is: hw_memory002 = 'N GB (N x N GB nRxn PC4-nnnnX-X)' hw_nchips = 2 hw_ncores = 256 hw_nthreadspercore = 2 prepared_by = root (is never output, only tags rawfile) sw_file = xfs sw_os001 = SUSE Linux Enterprise Server 15 SP4 sw_state = Run level 3 (add definition here) # End of settings added by sysinfo_program 644.nab_s: # The following setting was inserted automatically as a result of # post-run basepeak application. basepeak = 1 627.cam4_s: # The following setting was inserted automatically as a result of # post-run basepeak application. basepeak = 1 607.cactuBSSN_s: # The following setting was inserted automatically as a result of # post-run basepeak application. basepeak = 1 603.bwaves_s: # The following setting was inserted automatically as a result of # post-run basepeak application. basepeak = 1 # The following section was added automatically, and contains settings that # did not appear in the original configuration file, but were added to the # raw file after the run. default: hw_psu_info000 = ThinkSystem 1100W Titanium Power Supply hw_psu_info001 = 4P57A72666 notes_plat_form_000 =BIOS configuration: notes_plat_form_005 =Operating Mode set to Custom Mode notes_plat_form_010 =ACPI SRAT L3 Cache as NUMA Domain set to Enabled notes_plat_form_015 =Core Performance Boost set to Disabled notes_plat_form_020 =DF P-states set to P1