SPEC Community
Product Support => SERT => Topic started by: jemetcal on May 20, 2022, 11:10:05 AM
-
Is it possible to change the measurement interval for worklets like CPU: SSJ similar to using EXPERT.prop on SPECpower_ssj2008. For example, can the config-all.xml file be modified to define worklet measurement interval duration? I understand this will result in a noncompliant run.
<!-- Hybrid SSJ -->
<measurement-phase>
<name>Measurement</name>
<sequence>
<interval-length ref="ssjIntervalLength"/>
<premeasurement>30s</premeasurment> <!-- add this parameter to execute each pre- measurement interval for 30s -->
<measurement>120s</measurment> <!-- add this parameter to execute each interval for 600s -->
<postmeasurement>10s</postmeasurment> <!-- add this parameter to execute each post-measurement interval for 10s -->
<interval-series className="GraduatedMeasurementSeries">
<interval-count>8</interval-count>
</interval-series>
</sequence>
</measurement-phase>
-
The interval duration can be changed for experimentation and investigative purposes, but as you pointed out correctly, any change will render the result non-compliant.
-
Understood. Is the sample method I entered the correct procedure, e.g. adding <measurement>[value]</measurement> to override the default measurement interval?