Author Topic: SUT Verification Failed  (Read 4038 times)

wglandon

  • Newbie
  • *
  • Posts: 1
  • Karma: +0/-0
SUT Verification Failed
« on: August 21, 2020, 08:17:13 PM »
Attempting to verify the SUT from the Controller results in an SUT Verification Failed message.
I can ping between the SUT and the Controller.
The firewall has been disabled on the SUT and Controller.
The latest 64bit version of Java has been installed on the SUT and the Controller and the path has been updated in the serthost.sh, director.sh, reporter.sh and run-sertui.sh

Logs have been collected and are attached to this post.

Thanks,

Warren

Klaus Lange

  • Moderator
  • Newbie
  • *****
  • Posts: 5
  • Karma: +0/-0
  • Just another day in paradise
Re: SUT Verification Failed
« Reply #1 on: September 28, 2020, 10:41:47 AM »
Hi there,

Thank you for your interest in SPEC and our SERT suite.

Please ensure that you started the SERT suite on the SUT, as outlined in the SERT user Guide, section 3.1.2 - https://www.spec.org/sert2/SERT-userguide.pdf.

If you still experience the same issues, please file a support ticket via https://www.spec.org/sert/feedback/issuereport.html and add the corresponding logs file as outline in Section 7 of the SERT User Guide. This will enable us to root cause your issue.

Regards,
Klaus-Dieter Lange
SPECpower Committee Chair