Author Topic: Client(s) not responding.-----the firewall is closed.thanks.  (Read 6058 times)

markcowell23

  • Newbie
  • *
  • Posts: 2
  • Karma: +0/-0
Client(s) not responding.-----the firewall is closed.thanks.
« on: August 18, 2019, 10:41:16 AM »
[root@client1 SPECvirt]# cat primectrl.out
2015-03-31 11:00:44:323 Tue Mar 31 11:00:44 CST 2015
2015-03-31 11:00:44:357 RMI server started: client1:9990
2015-03-31 11:00:44:361 [INFO] This is a perf-only benchmark run. Skipping active idle polling interval.
2015-03-31 11:00:44:362 PrimeControl: preparing client drivers.
2015-03-31 11:00:44:506 PrimeControl: starting clients...
2015-03-31 11:00:44:527 PrimeControl: PTDs not used for this benchmark run!
2015-03-31 11:00:44:527 PrimeControl: starting 4 masters.
2015-03-31 11:04:47:012 PrimeControl: waiting on 4 prime client(s).
.
2015-03-31 11:04:48:025 setting hostsReady = true
2015-03-31 11:07:05:113 PrimeControl: Workload and prime controller builds: 79
2015-03-31 11:07:27:641 specvirt: clock sync check completed successfully
2015-03-31 11:07:27:641 specvirt: initiating workload ramp-up.
2015-03-31 11:07:27:641 Polling start time = Tue Mar 31 11:27:28 CST 2015
2015-03-31 11:07:27:641 Polling end time   = Tue Mar 31 13:27:28 CST 2015
2015-03-31 11:12:28:684 PrimeControl: all workloads started.
2015-03-31 11:17:26:811 [ERROR] Received abort signal from client1:1096. Terminating.
2015-03-31 11:17:26:813 PrimeControl: sending abortTest() to prime clients.
2015-03-31 11:27:30:398 PrimeControl: stopping remote client processes
2015-03-31 11:27:30:642 [ERROR] client1:1096 (PRIME_HOST[0][1]) failed to enter run phase before start of polling interval!
2015-03-31 11:27:30:643 [ERROR] client1:1094 (PRIME_HOST[0][2]) failed to enter run phase before start of polling interval!
2015-03-31 11:27:30:644 [ERROR] client1:1092 (PRIME_HOST[0][3]) failed to enter run phase before start of polling interval!
2015-03-31 11:27:30:644 PrimeControl: [ERROR] one or more workloads failed to start runtime before start of polling interval. Aborting.
2015-03-31 11:27:30:644 PrimeControl: [ERROR] startMasters() failed!
2015-03-31 11:27:32:407 PrimeControl: stopping local client threads
2015-03-31 11:27:32:407 Terminating client processes
2015-03-31 11:27:32:407 Sending termination signal to clientmgr processes
2015-03-31 11:27:32:407 Terminating prime client processes
2015-03-31 11:27:32:408 Sending termination signal to prime clientmgr processes
2015-03-31 11:27:32:408 Exiting...
2015-03-31 11:27:32:408 PrimeControl: terminating run. Please wait...
2015-03-31 11:27:32:418 specvirt: benchmark run failed!
2015-03-31 11:27:32:418 specvirt: Done!
[root@client1 SPECvirt]# cat Clientmgr1_1096.out
2015-03-31 11:00:24:661 Creating clientmgr using RMI Registry port 1096
2015-03-31 11:00:24:728 client1:1096 ready...
2015-03-31 11:04:47:000 Starting client1:1096
2015-03-31 11:04:47:001 Command line: [java, -jar, specweb.jar, -sv, client1, -svp, 9990, -id, 1, -tile, 0, -wkld, 1]
2015-03-31 11:04:47:005 Started client1:1096

Messages from: client1:1096
-> 2015-03-31 11:04:47:125 Looking up SPECvirt controller: client1
-> 2015-03-31 11:04:47:260 masterID: 1, tile: 0, workload: 1
-> 2015-03-31 11:04:47:260 hostname: client1
-> 2015-03-31 11:04:47:382 Tue Mar 31 11:04:47 CST 2015
-> 2015-03-31 11:04:47:395 RMI server started: client1:9901
-> 2015-03-31 11:04:47:404 SpecwebControl: **** SPECweb2005 benchmark started
-> 2015-03-31 11:04:47:405 SpecwebControl: * Running SPECweb_Support workload
-> 2015-03-31 11:04:47:405 Configuration: Clearing workload.
-> 2015-03-31 11:04:47:409 RemoteLoadGen: Total clients: 1
-> 2015-03-31 11:04:48:614 RemoteLoadGen: Initializing clients...
-> 2015-03-31 11:04:56:363 RemoteLoadGen: setting client tile ID to 0
-> 2015-03-31 11:04:56:585 SpecwebControl: Waiting for SPECvirt start signal.
-> 2015-03-31 11:07:27:641 sleeping for 1 seconds.
-> 2015-03-31 11:07:28:642 SpecwebControl: *** Starting Iteration 1 of 1
-> 2015-03-31 11:07:28:642 RemoteLoadGen: 300-second ramp-up starting.
-> 2015-03-31 11:12:28:657 RemoteLoadGen: Finished starting clients.
-> 2015-03-31 11:12:28:684 SpecwebControl: Warming up for 900 seconds.
-> 2015-03-31 11:17:26:762 RemoteLoadGen: Warning: RMI exception trying to contact client1:1010. Retrying...
-> 2015-03-31 11:17:26:770 RemoteLoadGen: [ERROR] Unable to contact client1:1010
-> 2015-03-31 11:17:26:771 RemoteLoadGen: [ERROR] 1 remote clients, but only 0 responded
-> 2015-03-31 11:17:26:771 SpecwebControl: [ERROR] Client(s) not responding. Aborting test.
-> 2015-03-31 11:17:26:777 RemoteLoadGen: [ERROR] Remote exception setting server reset data collection from client1:1010
-> java.rmi.ConnectException: Connection refused to host: 101.1.1.19; nested exception is:
->      java.net.ConnectException: 拒绝连接
-> 2015-03-31 11:17:26:779 RemoteLoadGen: 180-second ramp-down starting.
-> 2015-03-31 11:17:26:779 RemoteLoadGen: stopping client client1:1010; abort=false
-> 2015-03-31 11:17:26:780 RemoteLoadGen: [ERROR] Remote exception stopping clients from client1:1010
-> java.rmi.ConnectException: Connection refused to host: 101.1.1.19; nested exception is:
->      java.net.ConnectException: 拒绝连接
-> 2015-03-31 11:17:26:780 SpecwebControl: [ERROR] runWorkload() failed!
-> 2015-03-31 11:17:26:781 SpecwebControl: [ERROR] runTests() failed!
-> 2015-03-31 11:17:26:781 SpecwebControl: [ERROR] Benchmark run failed!
-> 2015-03-31 11:17:26:793 SpecwebControl: Terminating run. Please wait...
[root@client1 SPECvirt]#
[root@client1 SPECvirt]#
[root@client1 SPECvirt]#
[root@client1 SPECvirt]#

ChrisFloyd

  • Moderator
  • Jr. Member
  • *****
  • Posts: 52
  • Karma: +2/-0
Re: Client(s) not responding.-----the firewall is closed.thanks.
« Reply #1 on: August 20, 2019, 08:07:48 PM »
Have you also disabled SELinux?  Which linux distro are you using? 

ChrisFloyd

  • Moderator
  • Jr. Member
  • *****
  • Posts: 52
  • Karma: +2/-0
Re: Client(s) not responding.-----the firewall is closed.thanks.
« Reply #2 on: August 22, 2019, 02:49:17 PM »
Also, it appears you are using version 1.0 of the SPECvirt_sc2013 benchmark.  I would encourage you to upgrade to version 1.1.  You can send a note to info@spec.org, providing your license # and informing them you would like the upgrade to v1.1.

Can you also provide the output from the ClientMgr_1088 log? It appears he run is stopping at beginning of steady state, which could be caused by a number of different factors. 

Thanks

markcowell23

  • Newbie
  • *
  • Posts: 2
  • Karma: +0/-0
Re: Client(s) not responding.-----the firewall is closed.thanks.
« Reply #3 on: August 24, 2019, 11:20:49 AM »
Also, it appears you are using version 1.0 of the SPECvirt_sc2013 benchmark.  I would encourage you to upgrade to version 1.1.  You can send a note to info@spec.org, providing your license # and informing  them you would like the upgrade to v1.1.  Can you also provide the output from the ClientMgr_1088 log? It appears he best washing machine in india run is stopping at beginning of steady state, which could be caused by a number of different factors. 

Thanks

Ok I will update to new version and let you know
« Last Edit: September 02, 2019, 02:53:30 AM by markcowell23 »