As SERT 2 user guide:
“For multiple drives, drives should be partitioned as follows:
o First drive: OS partition(s) and one SERT Data partition (min. 20 GB)
o Any additional drive: SERT Data drive (entire drive capacity)
RAID arrays of more than one device are not allowed, i.e. each individual storage device must be configured as JBOD or a single disk RAID 0 array.”
So, if we have 4 storage, shall have 5 partitions.
But when we have more than 25 storage installed in server, some partition can't be created on Windows platform beacuse of only 26 partitions allowed on windows platform.
How to configure the storage in SERT 2 for server with more than 25 storage on windows platform?