Product Support > SPECvirt_sc2013

SPECjApp w/ Websphere and DB2 dbload issue

(1/2) > >>

reggiesun:
I am using websphere and DB2 on SPECjAPPserver
when i run loaddb.sh 500 4 in /opt/SPECjAppserver/bin to generate the Db data

in Appserver1 run automicity test, all 3 test items are PASS, run 1 tile also valid.
but in Appserver 2 3 4, the automicity test, the test item 1, 2 are pass, 3 is fail

when i run the specvirt, only tile1 is normal, app2 app3 app4 seems no valid responding....why?

how to solve this problem? thanks!

abond:
Hey Reggiesun,

I'm sorry you are having issues getting tiles 2-4 going.

A couple of questions.
1. If you run a single tile test everything works fine?
2. When you mentioned running the atomicity tests are you referring to running them via the curl command outlined in the technical support FAQ?https://spec.org/virt_sc2013/docs/SPECvirt_TechnicalSupport.html#Appserver

One of the best ways to validate whether the appserver and related db server are working correctly and get a better understanding of what type of error might be happening is to run manual transactions through the appserver web interface.  You would need to bring up a web browser and bring up the appserver application web page.  Then enter some manual transactions through the web ui to see if they are completed correctly.  This would help validate whether the db access in tiles 2-4 is working correctly. 

Thanks,
Andy

reggiesun:
Hi Andy,
thank you for you reply,
I can get 1 tile  run pass
when i get 1 tile run pass, i assumed that the DB data is already health, am i right?

the atomicity test i am running is
curl http://specdelivery:9080/SPECjAppServer/app?action=atomicityTests
for tile1, i can get all three items pass, but 2 3 4, first two item pass, and the last fail.

then i do a test, if i poweroff the appserver1, then i run automicityTests on appserver2, it will all three item pass.....then i power on and start websphere, appserver1 fail on item three, appserver2 still all three item pass.

i also do another test, start the appserver2 first, appserver 1, 3 ,4 later,  appserver2 is normal, and 1 3 4 automicity test item 3 fail

sorcier:
hey , can anyone tell me if there is a user guide for set up the app/db with WebSphere and DB2 ？thanks in advance

reggiesun:
from the SystemOut.log, i saw that because all the appserver 2 3 4 are cloned by appserver1

[11/21/19 2:20:12:337 EST] 00000058 SibMessage    I   [appserverNode01:appserverNode01.server1-appserverNode01] CWSIS1593I: The messaging engine, ME_UUID=DB6CA71846112E6C, INC_UUID=0C7D7FB78CD50A19, has failed to gain an initial lock on the data store.

seems all ME_UUID are the same, is that the root cause of conflict?

how can I modify it?

Navigation

[0] Message Index

[#] Next page