SPECmail2001 Result HP StorageWorks Disk Array xp128 SPECmail2001 msgs/min = 6,250 Valid Result SPEC license # 3, Tested by: HP Storage Network Solutions Test date: Apr-2003, Hardware Avail: Mar-2003, Software Avail: Jun-2002 6,250 SPECmail2001 messages per minute is equal to 1,250,000 SPECmail2001_users. -------------------------------------------------------------------------------- Summary Results --------------- Response Required Percentage Compliant Function time limit Percentage 80% 100% 120% (seconds) Compliant SMTP Connect 5 >95% 100.00% 100.00% 100.00% SMTP Data 5 >95% 100.00% 100.00% 99.99% POP Connect 5 >95% 100.00% 100.00% 100.00% POP Status 5 >95% 100.00% 100.00% 100.00% POP Retrieve 5 >95% 100.00% 100.00% 100.00% POP Delete 5 >95% 100.00% 100.00% 100.00% Delivery Time 60 >95% 99.02% 99.00% 99.22% Error Rate NA <1% 0.00% 0.01% 0.00% -------------------------------------------------------------------------------- -------------------------------------------------------------------------------- HP Network Storage (1 system) Software SAN Software: Command View, LUN Configuration & Security Manager, Business Copy Availability: Jun-2002 Operating System: Proprietary OS File System: N/A Hardware Vendor: Hewlett-Packard Model Name: HP StorageWorks Disk Array xp128 Availability: May-2002 Disk Subsystem: SAN - RAID0/1 (See attached Tuning Information section) Memory (MB): 512MB - shared memory Network: None # of Systems: 1 CPU: NEC/MIPS-32 ACP - Array Control Processor CPU MHz: 160 CPUs Enabled: 2 cores, 2 chips, 1 core/chip Primary Cache: N/A Secondary Cache: N/A Other Cache: SAN - 16GB of storage cache Other: Fiber Card: Client Host Interface Processor CHIP - NEC/MIPS-32 200MHz Notes / Tuning Information Network Storage Configuration Number of disk drives 80 Disk drive capacity 73GB, 10,000 RPM Number of array groups 20 Number of disks per array group 4 Array group RAID level RAID0/1 Number of array groups used per MAS 4 Open-3 LDEV size 2.461GB Number of Open-3 LDEVs used per array group 10 Number of Open-3 LDEVs used per MAS 40 Cache memory 16GB - dynamic write cache, mirror with independent power supply Cache memory battery backup time 48 hours, minimum Shared memory 512MB Shared memory backup time 7 days Number of 8-port CHIP Pair 1 - each with 8-port 200MHz NEC/MIPS-32 microprocessor 2Gb/s Auto-sensing FC/CA Number of ACP Pair 1 - High Performance, 160MHz NEC/MIPS-32 microprocessor microcode version 21.04.04 -------------------------------------------------------------------------------- Internet Directory - LDAP Server (3 systems) Software System Release: MSR 3.3 Availability: Jun-2002 Operating System: MOS File System: MessageBase (tm) Hardware Vendor: Mirapoint Model Name: DS400 Availability: Mar-2002 Disk Subsystem: 3 x 73GB 10K RPM SCSI (RAID1 w/2 disks + hot-spare) Memory (MB): 2048 Network: Intel 10/100 Pro # of Systems: 3 CPU: Intel PIII CPU MHz: 1400 CPUs Enabled: 2 cores, 2 chips, 1 core/chip Primary Cache: 32KB L1 cache on chip Secondary Cache: 512KB Other Cache: N/A Other: N/A Notes / Tuning Information Hostname: mperf20 (primary), mperf21 (replica), mperf22 (replica) Licenses: User-unlimited, Directory Server Access, SMTP FastPath LDAP Server configuration: Truncated LDIF contents (HP1.25M.ldif) used to populate the ldap database: dn: c=us objectclass: top objectclass: country c: us dn: o=specHP1.25M,c=us objectclass: organization o: specHP1.25M dn: miLoginid=u1,o=specHP1.25M,c=us objectclass: top objectclass: mirapointUser objectclass: mirapointMailUser miLoginid: u1 sn: u1 cn: u1 mail: u1@local.p.net maillocaladdress: u1 mailhost: mperf11.p.net userPassword: u1 ... CLI configuration commands: # Don't send system alerts, etc. to customercare@mirapoint.com conf disable customercare # Create index for the miLoginid attribute dir addindex "" miLoginid eq,pres # Populate the LDAP database dir importldif "" ftp://mperf100.p.net/pub/hp1.25m.ldif # Setup primary LDAP server dir addreplica spec mirapoint c=us c=us dir setrepoption spec binddn cn=administrator dir setrepoption spec bindpw admin dir setrepoption spec master ldap://mperf20.p.net dir addrephost spec ldap://mperf21.p.net dir addrephost spec ldap://mperf22.p.net dir exportconfig # (Save the exported config to a file) # Setup replica LDAP server dir importconfig # (Paste in the config from exported file obtained on the primary) MSL is 30 seconds (not configurable) TIME_WAIT is 60 seconds (not configurable) MSS is 1460 bytes (not configurable) -------------------------------------------------------------------------------- Message Director - Router (3 systems) Software System Release: MSR 3.3 Availability: Jun-2002 Operating System: MOS File System: MessageBase (tm) Hardware Vendor: Mirapoint Model Name: MD400 Availability: Mar-2002 Disk Subsystem: 3 x 73GB 10K RPM SCSI (RAID1 w/2 disks + hot-spare) Memory (MB): 2048 Network: Intel 10/100 Pro # of Systems: 3 CPU: Intel PIII CPU MHz: 1400 CPUs Enabled: 2 cores, 2 chips, 1 core/chip Primary Cache: 32KB L1 cache on chip Secondary Cache: 512KB Other Cache: N/A Other: N/A Notes / Tuning Information Hostnames: mperf2, mperf3, mperf4 Licenses: User-limit Unlimited, LDAP Routing, POP Unlimited, SMTP FastPath CLI configuration commands: # Don't send system alerts, etc. to customercare@mirapoint.com conf disable customercare # Accept mail for the local domain maildom add local.p.net # Relay mail for remote domains relay add operf31.p.net # Turn off authentication check to prevent unauthorized relaying smtp set smtpauth off # Enable option to minimize message queueing smtp set fastpath on # Perform per-user routing using LDAP mailhost lookups smtp set ldaprouting all # Configure LDAP (primary: 10.5.1.20; replicas: 10.5.1.21 and 10.5.1.22) #(Point mperf2 to primary - command issued on mperf2) ldap add 10.5.1.20 #(Point mperf3 and mperf4 to replica - command issued on mperf3 and mperf4) ldap add 10.5.1.22 ldap setquery user:publishedname o=specHP1.25M,c=us (miLoginid=$(mbox)) mail ldap setquery user:mailhost o=specHP1.25M,c=us (miLoginid=$(mbox)) mailhost # Set the period that LDAP query results are cached internally ldap set cachetimeout 2h MSL is 30 seconds (not configurable) TIME_WAIT is 60 seconds (not configurable) MSS is 1460 bytes (not configurable) -------------------------------------------------------------------------------- Message Director - Access Switch (2 systems) Software System Release: MSR 3.3 Availability: Jun-2002 Operating System: MOS File System: MessageBase (tm) Hardware Vendor: Mirapoint Model Name: MD400 Availability: Mar-2002 Disk Subsystem: 3 x 73GB 10K RPM SCSI (RAID1 w/2 disks + hot-spare) Memory (MB): 2048 Network: Intel 10/100 Pro # of Systems: 2 CPU: Intel PIII CPU MHz: 1400 CPUs Enabled: 2 cores, 2 chips, 1 core/chip Primary Cache: 32KB L1 cache on chip Secondary Cache: 512KB Other Cache: N/A Other: N/A Notes / Tuning Information Hostname: mperf5, mperf6 Licenses: User-limit 20, LDAP Routing, POP 20 users, SMTP FastPath CLI configuration commands: # Don't send system alerts, etc. to customercare@mirapoint.com conf disable customercare # Enable per-user access switching pop set mode ldapproxy # Configure LDAP #(Point mperf5 and mperf6 to first replica - command issued on mperf5 and mperf6 ldap add 10.5.1.21 ldap setquery user:publishedname o=specHP1.25M,c=us (mail=$(login)) mail ldap setquery user:mailhost o=specHP1.25M,c=us (mail=$(login)) mailhost # Set the period that LDAP query results are cached internally ldap set cachetimeout 2h MSL is 30 seconds (not configurable) TIME_WAIT is 60 seconds (not configurable) MSS is 1460 bytes (not configurable) -------------------------------------------------------------------------------- Internet Message Server - Message Store (5 systems) Software System Release: MSR 3.3 Availability: Jun-2002 Operating System: MOS File System: MessageBase (tm) Hardware Vendor: Mirapoint Model Name: M4000-S Availability: Mar-2002 Disk Subsystem: 3x73GB 10k RPM SCSI (RAID1 w/2 disks + hot-spare) Memory (MB): 2048 Network: Intel 10/100 Pro # of Systems: 5 CPU: Intel PIII CPU MHz: 1400 CPUs Enabled: 2 cores, 2 chips, 1 core/chip Primary Cache: 32KB L1 cache on chip Secondary Cache: 512KB Other Cache: N/A Other: Fiber card: QLA 2200F/66mHz PCI (SAN connector) Notes / Tuning Information Hostnames: mperf11, mperf12, mperf13, mperf14 and mperf15. Licenses: User-limit unlimited, LDAP Routing, POP unlimited users, SAN Attached Storage, SMTP FastPath CLI configuration commands: # Don't send system alerts, etc. to customercare@mirapoint.com conf disable customercare # Accept mail for the local domain maildom add local.p.net # Turn off authentication check to prevent unauthorized relaying smtp set smtpauth off # Enable option to minimize message queueing smtp set fastpath on # Configure LDAP (pointing to LDAP primary for authentication) ldap add 10.5.1.20 ldap setquery user:publishedname o=specHP1.25M,c=us (miLoginid=$(mbox)) mail auth set default plaintext:ldap MSL is 30 seconds (not configurable) TIME_WAIT is 60 seconds (not configurable) MSS is 1460 bytes (not configurable) -------------------------------------------------------------------------------- Benchmark Manager (1 system) Software JVM: Sun Java 2 SDK, Standard Edition, v1.2.2_009 (symcjit) Availability: Apr-2001 Operating System: Microsoft Windows NT Workstation 4.0 (service pack 5) File System: FAT Hardware Vendor: Hewlett-Packard Model Name: Pavilion 4440 Availability: Jun-2000 Disk Subsystem: 1 x 4GB SCSI Memory (MB): 156 Network: Intel 10/100 Pro # of Systems: 1 CPU: AMD-K6-2 CPU MHz: 333 CPUs Enabled: 1 core, 1 chip, 1 core/chip Primary Cache: 32KB(I) + 32KB(D) on chip Secondary Cache: 512KB Other Cache: N/A Other: N/A Notes / Tuning Information Hostname: operf30 MaxUserPort set to value 65534 -------------------------------------------------------------------------------- SMTP Sink (1 system) Software JVM: Sun Java 2 SDK, Standard Edition, v1.2.2_009 (symcjit) Availability: Apr-2001 Operating System: Microsoft Windows 2000 Professional File System: NTFS Hardware Vendor: Hewlett-Packard Model Name: ProLiant ML370 Server Availability: Mar-2003 Disk Subsystem: 1 x 36.4GB Ultra 320 SCSI Memory (MB): 2GB Network: 1 NC7781 Gigabit NIC # of Systems: 1 CPU: Intel Xeon CPU MHz: 2400 CPUs Enabled: 2 cores, 2 chips, 1 core/chip Primary Cache: Secondary Cache: 512KB Other Cache: N/A Other: N/A Notes / Tuning Information Hostname: operf31 Comment out line for SMTP in /WINNT/system32/drivers/etc/SERVICES (required to allow the mail sink to bind to port 25) MaxUserPort set to value 65534 -------------------------------------------------------------------------------- Load Generator (5 systems) Software JVM: Sun Java 2 SDK, Standard Edition, v1.2.2_009 (symcjit) Availability: Apr-2001 Operating System: Microsoft Windows 2000 Professional File System: NTFS Hardware Vendor: Hewlett-Packard Model Name: ProLiant ML370 Server Availability: Mar-2003 Disk Subsystem: 1 x 36.4GB Ultra 320 SCSI Memory (MB): 2GB Network: 1 x NC7781 Gigabit NIC # of Systems: 5 CPU: Intel Xeon CPU MHz: 2400 CPUs Enabled: 2 cores, 2 chips, 1 core/chip Primary Cache: Secondary Cache: 512KB Other Cache: N/A Other: N/A Notes / Tuning Information Hostnames: operf32, operf33, operf34, operf35, operf36 MaxUserPort set to value 65534 -------------------------------------------------------------------------------- -------------------------------------------------------------------------------- General Notes / Tuning Information Network switch:    Foundry Network ServerIronXL (2x 1000Base-SX ports and 24x 10/100 BaseT ports)    The Foundry switch is configured to perform SMTP server load balancing (SLB)    for virtual host vmr1.p.net. Accesses to the SMTP port of vmr1.p.net are    load balanced across the SMTP ports of real hosts mperf2, mperf3, mperf4    The Foundry switch is configured to perform POP3 server load balancing (SLB)    for virtual host vsw1.p.net. Accesses to the POP3 port of vsw1.p.net are    load balanced across the POP3 ports of real hosts mperf5, mperf6    using the round-robin SLB algorithm.    Configuration commands:         server real mperf2 10.5.1.2 port smtp         server real mperf3 10.5.1.3 port smtp         server real mperf4 10.5.1.4 port smtp         server virtual vmr1 10.5.10.1 predictor round-robin           port smtp           bind smtp mperf2 smtp mperf3 smtp mperf4         server real mperf5 10.5.1.5 port pop3         server real mperf6 10.5.1.6 port pop3         server virtual vsw1 10.5.10.2 predictor round-robin           port pop3           bind pop3 mperf5 pop3 mperf6 DNS configuration:    "A" records for every host on the network (to map hostnames to IP    addresses).    "PTR" records for every host on the network (to reverse map IP    addresses to hostnames).    "PTR" and "A" records for the "virtual" host vmr1.p.net.    Host alias "smtp.p.net" is mapped to vmr1.p.net (the virtual message    router pool) with a CNAME record.    Host alias "pop.p.net" is mapped to vsw1.p.net (the virtual access switch)    with a CNAME record. SAN switch:    Brocade Silkworm 2800 (16 Universal ports)    Performance: 1.0625 Gb/sec line speed, full duplex    Switch Bandwidth: 16 Gb/sec end-to-end    Switch Core: Non-blocking    Fabric Latency: < 2 microseconds with no contention, cut through routing    Maximum Frame Size: 2112-byte payload    Frame Buffers: 448 dynamically allocated Testing performed at Mirapoint Headquarters (Performance Lab) in Sunnyvale, CA. -------------------------------------------------------------------------------- For questions about this result, please contact the tester. For other inquiries, please contact webmaster@spec.org Copyright (C) 1999-2001 Standard Performance Evaluation Corporation Benchmark run on Mon Apr 28 02:19:55 PST 2003 by SPECmail2001 v1.01 Report generated on Mon Apr 25 17:23:51 EDT 2005 by SPECmail2001 v1.05 HTML Formatter