# Invocation command line:
# C:\spec\bin\runspec --config smc-win-intel.cfg --reportable all
# output_root was not used for this run
############################################################################
# This is a sample config file. It was tested with:
#
#      Compiler name/version:       [intel 10.0]
#      Operating system version:    [Windows 2003]
#      Hardware:                    [x86-64/x64]
#
#
# Note that issues with compilation should be directed
# to the compiler vendor. Information about SPEC techncial
# support can be found in the techsupport document in the
# Docs directory of your benchmark installation.
#
# Also note that this is a sample configuration. It
# is expected to work for the environment in which
# it was tested; it is not guaranteed that this is
# the config file that will provide the best performance.
#
# Note that you might find a more recent config file for
# your platform with the posted results at
# www.spec.org/mpi2007
tune        = base
ext         = intel
PATHSEP     = /
env_vars=1
teeout        = yes

#makeflags = -j 8
ranks = 8

#include: smc-win-appfile.cfg
#  ----- Begin inclusion of 'smc-win-appfile.cfg'
############################################################################
# This is an Scali MPI Connect supporting config file for windows.


%if !defined(%{MPIMON_OPTIONS})
%define MPIMON_OPTIONS
%endif

#%warning using %{MPIMON_OPTIONS}

%if defined(%{IC})
#%warning using %{IC}
%else
#%warning defaulting to smp
%define IC smp
%endif

submit = mpimon -net %{IC} %{MPIMON_OPTIONS} $command -- localhost $ranks


# ---- End inclusion of 'C:/spec/config/smc-win-appfile.cfg'

default=default=default=default:

ENV_MPI_BITNESS=64
ENV_MPI_WRAPPER_SYNTAX=windows

MPI_INC=${SMC_HOME}\include
MPI_LIB=${SMC_HOME}\lib\amd64
MPI_LIBS="${MPI_LIB}"\scampi.lib "${MPI_LIB}"\scampio.lib

MPI_LFLAGS=# /link /libpath:"${MPI_LIB}"
MPI_CFLAGS=/I"${MPI_INC}"
MPI_FFLAGS=/I"${MPI_INC}"

EXTRA_LIBS=${MPI_LIBS}

CXX= icl ${MPI_CFLAGS}
CC = icl ${MPI_CFLAGS}
FC = ifort ${MPI_FFLAGS}

OBJ = .obj

STACKSIZE     = /F3950000000

OPTIMIZE      = /O3 /Qprec-div- /QxP

EXTRA_LDFLAGS = ${STACKSIZE} ${MPI_LFLAGS}


115.fds4:
CPORTABILITY = /DSPEC_MPI_UC_NO_TRAILING_UNDERSCORE

121.pop2:
CPORTABILITY =   /DSPEC_MPI_WINDOWS_ICL

127.wrf2:
NEEDATFILE   = 1
CPORTABILITY = /DSPEC_MPI_CASE_FLAG
FPORTABILITY = /us /Qlowercase

129.tera_tf:
FPORTABILITY = /fpscomp:general

130.socorro:
CPORTABILITY = /DSPEC_NO_UNDERSCORE
FPORTABILITY = /Qlowercase

132.zeusmp2:
CPORTABILITY = /DSPEC_MPI_WINDOWS_ICL
FPORTABILITY = /fpscomp:general

# The following section was added automatically, and contains settings that
# did not appear in the original configuration file, but were added to the
# raw file after the run.
default:
flagsurl000 = http://www.spec.org/mpi2007/flags/dell.ic10.windows.flags.xml
hw_avail = Dec-2006
license_num = 021
prepared_by = Rolf Welde Skeie
sw_auto_parallel = No
sw_avail = Aug-2007
sw_base_ptrsize = 64-bit
sw_other = None
sw_peak_ptrsize = Not Applicable
system_name = PowerEdge 1955
system_vendor = Dell Inc.
test_date = Nov-2007
test_sponsor = Scali, Inc.
tester = Scali, Inc.
system_class = SMP
sw_preprocessors = None
sw_mpi_other = None
sw_mpi_library = Scali MPI Connect 5.5
sw_f_compiler = Intel Fortran Compiler 10.0.027
sw_cxx_compiler = Intel C++ Compiler 10.0.027
sw_c_compiler = Intel C++ Compiler 10.0.027
node_E1_count = 1
node_E1_hw_adapter_NONE_count = 0
node_E1_hw_adapter_NONE_data_rate = Not Applicable
node_E1_hw_adapter_NONE_driver = Not Applicable
node_E1_hw_adapter_NONE_firmware = Not Applicable
node_E1_hw_adapter_NONE_interconnect = None
node_E1_hw_adapter_NONE_model = None
node_E1_hw_adapter_NONE_ports_used = 0
node_E1_hw_adapter_NONE_slot_type = Not Applicable
node_E1_hw_cpu_char = 1333 MHz FSB
node_E1_hw_cpu_mhz = 2660
node_E1_hw_cpu_name = Intel Xeon X5355
node_E1_hw_disk000 = Dell SAS5 RAID 0 with 2 x 73BG Fujitsu MAY2073RC
node_E1_hw_disk001 = 10k RPM
node_E1_hw_memory = 16 GB (4 x 4GB DIMMs)
node_E1_hw_model = PowerEdge 1955 (Xeon X5355 2.66GHz)
node_E1_hw_nchips = 2
node_E1_hw_ncores = 8
node_E1_hw_ncoresperchip = 4
node_E1_hw_ncpuorder = 1-2 chips
node_E1_hw_nthreadspercore = 1
node_E1_hw_ocache = None
node_E1_hw_other = None
node_E1_hw_pcache = 32 KB I + 32 KB D on chip per core
node_E1_hw_scache = 8 MB I+D on chip per chip, 4 MB shared / 2 cores
node_E1_hw_tcache = None
node_E1_hw_vendor = Dell Inc.
node_E1_label = Dell PowerEdge 1955
node_E1_order = 1
node_E1_purpose = compute, file server
node_E1_sw_localfile = NTFS
node_E1_sw_os000 = Microsoft Windows Server 2003 R2 Enterprise X64
node_E1_sw_os001 = Edition Service Pack 2
node_E1_sw_other = None
node_E1_sw_sharedfile = Not Applicable
node_E1_sw_state = multi-user