# Invocation command line: # /lvol_nfs/brent/mpi2007_v1.0/bin/runspec --reportable -c linux_em64t_hpmpi medium --ranks=64 --define CMD_PREFIX= --define MPIRUN_OPTIONS=-cpu_bind=MAP_CPU:0,4,1,5,2,6,3,7 -e MPI_RDMA_NENVELOPE=32 -e MPI_RDMA_MSGSIZE=4096,16384,4194304 -e LD_LIBRARY_PATH=/opt/intel/cce/10.1/lib:/opt/intel/fce/10.1/lib:/apps/lsf/7.0/linux2.6-glibc2.3-x86_64/lib:/apps/lsf/7.0/linux2.6-glibc2.3-x86_64/lib:/apps/lsf/7.0/linux2.6-glibc2.3-x86_64/lib -hostfile /lvol_nfs/brent/mpi2007_v1.0/hosts.26304 --define MPI_ROOT=/lvol_nfs/brent/mpi2007_v1.0/hpmpi23_20081105 # output_root was not used for this run ############################################################################ action=validate tune=base env_vars=1 ext=icc101_hpmpi makeflags=-j 4 FC = $(MPI_ROOT)/bin/mpif90 CC = $(MPI_ROOT)/bin/mpicc CXX= $(MPI_ROOT)/bin/mpiCC BOPTS=-O3 -no-prec-div -xT default=default=default=default: COPTIMIZE = ${BOPTS} FOPTIMIZE = ${BOPTS} CXXOPTIMIZE= ${BOPTS} submit= %{CMD_PREFIX} \$MPI_ROOT/bin/mpirun %{MPIRUN_OPTIONS} \$SPEC/submit.sh $command 121.pop2: CPORTABILITY= -DSPEC_MPI_CASE_FLAG 127.wrf2: CPORTABILITY = -DSPEC_MPI_LINUX -DSPEC_MPI_CASE_FLAG 130.socorro=default=default=default: CPORTABILITY = -DSPEC_EIGHT_BYTE_LONG 104.milc=default=default=default: srcalt=calloc 113.GemsFDTD=default=default=default: srcalt=maxprocandstop 129.tera_tf=default=default=default: srcalt=fixbuffer # The following section was added automatically, and contains settings that # did not appear in the original configuration file, but were added to the # raw file after the run. default: flagsurl000 = http://www.spec.org/mpi2007/flags/EM64T_Intel101_flags.20090108.xml sw_base_ptrsize = 64-bit sw_peak_ptrsize = 64-bit sw_mpi_library = HP-MPI v2.3 sw_preprocessors = No sw_c_compiler = Intel C++ Compiler 10.1 for Linux (10.1.018) sw_cxx_compiler = Intel C++ Compiler 10.1 for Linux (10.1.018) sw_f_compiler = Intel Fortran Compiler 10.1 for Linux (10.1.018) test_sponsor = Hewlett-Packard Company license_num = 1 tester = HP Richardson hw_avail = Jun-2008 sw_avail = Jan-2009 prepared_by = HP Richardson system_vendor = Hewlett-Packard Company system_name = HP ProLiant DL160 G5 node_head_sw_state = Multi-User node_head_sw_sharedfile = NFS node_head_sw_other = none node_head_sw_os = SLES 10 update 1 node_head_sw_localfile = Linux/ext3 node_head_purpose = head, fileserver, compute node_head_order = 1 node_head_label = DL160 G5 Head Node node_head_hw_vendor = Hewlett-Packard Company node_head_hw_tcache = None node_head_hw_scache = 12 MB I+D on chip per chip, 6 MB shared / 2 cores node_head_hw_pcache = 32 KB I + 32 KB D on chip per core node_head_hw_other = HP Smart Array E200 Raid Controller node_head_hw_ocache = None node_head_hw_nthreadspercore = 1 node_head_hw_ncpuorder = 1-2 chips node_head_hw_ncoresperchip = 4 node_head_hw_ncores = 8 node_head_hw_nchips = 2 node_head_hw_model = DL160 G5 node_head_hw_memory = 16 GB (FBDIMM 8x2-GB 667 Mtf/s) node_head_hw_disk = 2x146GB 15k RPM SAS (RAID 0 mode) node_head_hw_cpu_name = Intel Xeon CPU E5462 node_head_hw_cpu_mhz = 2800 node_head_hw_cpu_char = 1600 MHz FSB node_head_hw_adapter_ib_slot_type = PCIe x16 Gen2 node_head_hw_adapter_ib_ports_used = 1 node_head_hw_adapter_ib_model = HP 448397-B21 (4x DDR) node_head_hw_adapter_ib_interconnect = InfiniBand node_head_hw_adapter_ib_firmware = 2.5.0 node_head_hw_adapter_ib_driver = OFED 1.3 node_head_hw_adapter_ib_data_rate = InfiniBand 4x DDR node_head_hw_adapter_ib_count = 1 node_head_hw_adapter_fs_slot_type = Builtin PCI-Express node_head_hw_adapter_fs_ports_used = 1 node_head_hw_adapter_fs_model = NetXtreme BCM5722 Gigabit Ethernet node_head_hw_adapter_fs_interconnect = Ethernet node_head_hw_adapter_fs_firmware = 5722-v3.07, ASFIPMI v6.02 node_head_hw_adapter_fs_driver = tg3 version 3.86b node_head_hw_adapter_fs_data_rate = 1 Gb/s Ethernet node_head_hw_adapter_fs_count = 1 node_head_count = 1 node_compute_sw_state = Multi-User node_compute_sw_sharedfile = NFS node_compute_sw_other = none node_compute_sw_os = SLES 10 update 1 node_compute_sw_localfile = Linux/ext3 node_compute_purpose = compute node_compute_order = 1 node_compute_label = DL160 G5 Compute Node node_compute_hw_vendor = Hewlett-Packard Company node_compute_hw_tcache = None node_compute_hw_scache = 12 MB I+D on chip per chip, 6 MB shared / 2 cores node_compute_hw_pcache = 32 KB I + 32 KB D on chip per core node_compute_hw_other = HP Smart Array E200 Raid Controller node_compute_hw_ocache = None node_compute_hw_nthreadspercore = 1 node_compute_hw_ncpuorder = 1-2 chips node_compute_hw_ncoresperchip = 4 node_compute_hw_ncores = 8 node_compute_hw_nchips = 2 node_compute_hw_model = DL160 G5 node_compute_hw_memory = 16 GB (FBDIMM 8x2-GB 667 Mtf/s) node_compute_hw_disk = 2x146GB 15k RPM SAS (RAID 0 mode) node_compute_hw_cpu_name = Intel Xeon CPU E5462 node_compute_hw_cpu_mhz = 2800 node_compute_hw_cpu_char = 1600 MHz FSB node_compute_hw_adapter_ib_slot_type = PCIe x16 Gen2 node_compute_hw_adapter_ib_ports_used = 1 node_compute_hw_adapter_ib_model = HP 448397-B21 (4x DDR) node_compute_hw_adapter_ib_interconnect = InfiniBand node_compute_hw_adapter_ib_firmware = 2.5.0 node_compute_hw_adapter_ib_driver = OFED 1.3 node_compute_hw_adapter_ib_data_rate = InfiniBand 4x DDR node_compute_hw_adapter_ib_count = 1 node_compute_hw_adapter_fs_slot_type = Builtin PCI-Express node_compute_hw_adapter_fs_ports_used = 1 node_compute_hw_adapter_fs_model = NetXtreme BCM5722 Gigabit Ethernet node_compute_hw_adapter_fs_interconnect = Ethernet node_compute_hw_adapter_fs_firmware = 5722-v3.07, ASFIPMI v6.02 node_compute_hw_adapter_fs_driver = tg3 version 3.86b node_compute_hw_adapter_fs_data_rate = 1 Gb/s Ethernet node_compute_hw_adapter_fs_count = 1 node_compute_count = 7 interconnect_ib_hw_topo = single switch interconnect_fs_hw_topo = single switch interconnect_ib_purpose = MPI traffic interconnect_ib_order = 1 interconnect_ib_label = InfiniBand Switch interconnect_ib_hw_vendor = Hewlett-Packard Company interconnect_ib_hw_switch_445825_ports = 144 interconnect_ib_hw_switch_445825_model = HP 445825-B21 interconnect_ib_hw_switch_445825_firmware = 4.1.1.1.11 interconnect_ib_hw_switch_445825_data_rate = InfiniBand 4x DDR interconnect_ib_hw_switch_445825_count = 1 interconnect_ib_hw_model = HP 445825-B21 (4x DDR) interconnect_fs_purpose = Cluster File System interconnect_fs_order = 1 interconnect_fs_label = Gigabit Ethernet Switch interconnect_fs_hw_vendor = Hewlett-Packard Company interconnect_fs_hw_switch_fs_ports = 48 interconnect_fs_hw_switch_fs_model = ProCurve J8693A Switch 3500yl-48G interconnect_fs_hw_switch_fs_firmware = K.12.16 interconnect_fs_hw_switch_fs_data_rate = 1Gbps Ethernet interconnect_fs_hw_switch_fs_count = 1 interconnect_fs_hw_model = ProCurve J8693A Switch 3500yl-48G system_class = Homogeneous notes_000 =Required alternate sources: notes_005 = 129.tera_tf: fixbuffer notes_010 =Optional alternate sources: notes_015 = 104.milc: calloc notes_020 = 113.GemsFDTD: maxprocandstop notes_025 = notes_030 =% cat submit.sh notes_035 =#!/bin/bash notes_040 =ulimit -s 326780 notes_045 =exec $* notes_050 =% notes_055 = notes_060 =BASE PORTABILITY FLAG NOTICE: notes_065 = 130.socorro: Discontinue use of -DSPEC_EIGHT_BYTE_LONG because it notes_070 = doesn't appear in the source code.