# Invocation command line: # /store/hfeng/mpi2007/bin/runspec --ranks 1280 -I --reportable -a validate -n 3 -o asc -i lref -T base -c sgi-linux-x86_64-sgimpi-14.0.0.080-noipo.cfg large # output_root was not used for this run ############################################################################ #################################################################### # # defaults # #################################################################### flagsurl000= http://www.spec.org/mpi2007/flags/SGI_x86_64_Intel14_flags.xml ext=sgimpi.intel.14.0.0.080 action=validate tune=base input=ref teeout=no env_vars=1 no_input_handler=null mean_anyway=1 FC = ifort CC = icc CXX = icpc #################################################################### # # Base flags # #################################################################### default=default=default=default: FOPTIMIZE = -O3 -xAVX -no-prec-div COPTIMIZE = -O3 -xAVX -no-prec-div CXXOPTIMIZE = -O3 -xAVX -no-prec-div -ansi-alias EXTRA_LIBS = -lmpi default=default=default=default: use_submit_for_speed=1 submit=mpiexec_mpt -n $ranks $command #submit=mpiexec_mpt -n $ranks dplace -s1 -c2-5,8-11 $command #################################################################### # # Portability flags # #################################################################### 121.pop2=default=default=default: CPORTABILITY = -DSPEC_MPI_CASE_FLAG 127.wrf2=default=default=default: CPORTABILITY = -DSPEC_MPI_CASE_FLAG -DSPEC_MPI_LINUX 130.socorro=default=default=default: srcalt=nullify_ptrs FPORTABILITY=-assume nostd_intent_in 104.milc=peak=default=default: basepeak=yes 107.leslie3d=peak=default=default: basepeak=yes 113.GemsFDTD=peak=default=default: ranks=160 115.fds4=peak=default=default: ranks=640 121.pop2=peak=default=default: basepeak=yes 122.tachyon=peak=default=default: basepeak=yes 126.lammps=peak=default=default: ranks=160 127.wrf2=peak=default=default: #ranks=744 basepeak=yes 128.GAPgeofem=peak=default=default: basepeak=yes 129.tera_tf=peak=default=default: basepeak=yes 130.socorro=peak=default=default: basepeak=yes #ranks=640 #RM_SOURCES=specblas.f90 #EXTRA_LIBS=-lacml -lmpi #EXTRA_LIBS=-Wl,--start-group -lmkl_intel_lp64 -lmkl_sequential -lmkl_core -Wl,--end-group -lmpi 132.zeusmp2=peak=default=default: basepeak=yes #ranks=640 137.lu=peak=default=default: basepeak=yes #ranks=640 143.dleslie=peak=default=default: #ranks=2048 #ENV_MPI_DSM_CPULIST=2-5,8-11:allhosts 145.lGemsFDTD=peak=default=default: #ranks=2048 #ENV_MPI_DSM_CPULIST=2-5,8-11:allhosts 147.l2wrf2=peak=default=default: #ranks=2048 #ENV_MPI_DSM_CPULIST=2-5,8-11:allhosts # The following section was added automatically, and contains settings that # did not appear in the original configuration file, but were added to the # raw file after the run. default: hw_avail = Sep-2013 license_num = 4 prepared_by = Huiyu Feng sw_avail = Nov-2013 sw_base_ptrsize = 64-bit sw_other = None sw_peak_ptrsize = 64-bit system_vendor = SGI interconnect_IOMPI_purpose = MPI and I/O traffic interconnect_IOMPI_order = 2 interconnect_IOMPI_label = InfiniBand (MPI and I/O) interconnect_IOMPI_hw_vendor = Mellanox Technologies and SGI interconnect_IOMPI_hw_switch_1_ports = 36 interconnect_IOMPI_hw_switch_1_firmware = 07130007_LLR and 08130007_LLR interconnect_IOMPI_hw_switch_1_data_rate = InfiniBand 4x FDR interconnect_IOMPI_hw_switch_1_count = 16 interconnect_IOMPI_hw_model = None test_sponsor = SGI tester = SGI system_class = Homogeneous sw_preprocessors = None sw_mpi_other = OFED 1.5.2 sw_mpi_library = SGI MPT 2.09 node_compute_count = 64 node_compute_hw_adapter_IB_count = 2 node_compute_hw_adapter_IB_data_rate = InfiniBand 4x FDR node_compute_hw_adapter_IB_driver = OFED-1.5.2 node_compute_hw_adapter_IB_firmware = 2.11.312 node_compute_hw_adapter_IB_interconnect = InfiniBand node_compute_hw_adapter_IB_model000 = Mellanox MT27500 with ConnectX-3 ASIC node_compute_hw_adapter_IB_model001 = (PCIe x8 Gen3 8 GT/s) node_compute_hw_adapter_IB_ports_used = 2 node_compute_hw_adapter_IB_slot_type = PCIe x8 Gen3 node_compute_hw_cpu_char000= Ten Core, 3.0 GHz, 8.0 GT/s QPI node_compute_hw_cpu_char001 = Intel Turbo Boost Technology up to 3.60 GHz node_compute_hw_cpu_char002 = Hyper-Threading Technology enabled node_compute_hw_cpu_mhz = 3000 node_compute_hw_cpu_name = Intel Xeon E5-2690 v2 node_compute_hw_disk = None node_compute_hw_memory = 64 GB (8 x 8 GB 2Rx4 PC3-14900R-13, ECC) node_compute_hw_model = SGI ICE X IP-113 (Intel Xeon E5-2690 v2, 3.0 GHz) node_compute_hw_nchips = 2 node_compute_hw_ncores = 20 node_compute_hw_ncoresperchip = 10 node_compute_hw_ncpuorder = 1-2 chips node_compute_hw_nthreadspercore = 2 node_compute_hw_ocache = None node_compute_hw_other = None node_compute_hw_pcache = 32 KB I + 32 KB D on chip per core node_compute_hw_scache = 256 KB I+D on chip per core node_compute_hw_tcache = 25 MB I+D on chip per chip node_compute_hw_vendor = SGI node_compute_label = SGI ICE X IP-113 Compute Node node_compute_order = 2 node_compute_purpose = compute node_compute_sw_localfile = NFSv3 node_compute_sw_os000 = SUSE Linux Enterprise Server 11 SP2, node_compute_sw_os001 = Kernel 3.0.80-0.7-default node_compute_sw_other000= SGI Tempo Compute Node 2.7.3, node_compute_sw_other001 = Build 708rp14.sles11sp2-1305311204 node_compute_sw_sharedfile = NFSv3 IPoIB node_compute_sw_state = Multi-user, run level 3 node_fileserver_count = 1 node_fileserver_hw_adapter_IB_count = 2 node_fileserver_hw_adapter_IB_data_rate = InfiniBand 4x FDR node_fileserver_hw_adapter_IB_driver = OFED-1.5.0 node_fileserver_hw_adapter_IB_firmware = 2.11.312 node_fileserver_hw_adapter_IB_interconnect = InfiniBand node_fileserver_hw_adapter_IB_model000 = Mellanox MT27500 with ConnectX-3 ASIC node_fileserver_hw_adapter_IB_ports_used = 2 node_fileserver_hw_adapter_IB_slot_type = PCIe x8 Gen3 node_fileserver_hw_cpu_char000= Intel Turbo Boost Technology up to 3.33 GHz node_fileserver_hw_cpu_char001 = Hyper-Threading Technology enabled node_fileserver_hw_cpu_mhz = 2600 node_fileserver_hw_cpu_name = Intel Xeon E5-2670 node_fileserver_hw_disk000 = 64.8 TB RAID 6 node_fileserver_hw_disk001 = 72 x 900 GB SAS (Western Digital, 10K RPM) node_fileserver_hw_memory = 128 GB (8 * 16 GB 2Rx4 PC3-12800R-11, ECC) node_fileserver_hw_model000= SGI Modular InfiniteStorage Server node_fileserver_hw_nchips = 2 node_fileserver_hw_ncores = 16 node_fileserver_hw_ncoresperchip = 8 node_fileserver_hw_ncpuorder = 1-2 chips node_fileserver_hw_nthreadspercore = 2 node_fileserver_hw_ocache = None node_fileserver_hw_other = None node_fileserver_hw_pcache = 32 KB I + 32 KB D on chip per core node_fileserver_hw_scache = 256 KB I+D on chip per chip node_fileserver_hw_tcache = 20 MB I+D on chip per chip node_fileserver_hw_vendor = SGI node_fileserver_label = SGI Modular InfiniteStorage Server node_fileserver_order = 3 node_fileserver_purpose = fileserver node_fileserver_sw_localfile = xfs node_fileserver_sw_os000 = SUSE Linux Enterprise Server 11 SP3 node_fileserver_sw_os001 = Kernel node_fileserver_sw_other000= SGI Foundation Software 2.9, node_fileserver_sw_other001 = Build 700r3.sles11-1004061553 node_fileserver_sw_state = Multi-user, run level 3 sw_c_compiler000 = Intel C++ Composer XE 2011 for Linux, sw_c_compiler001 = Version 14.0.0.080 Build 20130728 sw_cxx_compiler000 = Intel C++ Composer XE 2011 for Linux, sw_cxx_compiler001 = Version 14.0.0.080 Build 20130728 sw_f_compiler000 = Intel Fortran Composer XE 2011 for Linux, sw_f_compiler001 = Version 14.0.0.080 Build 20130728 system_name000 = SGI ICE X (Intel Xeon E5-2690 v2, 3.0 GHz) notes_000 =130.socorro (base): "nullify_ptrs" src.alt was used. notes_005 = notes_010 = Software environment: notes_015 = export MPI_REQUEST_MAX=65536 notes_020 = export MPI_TYPE_MAX=32768 notes_025 = export MPI_BUFS_THRESHOLD=1 notes_030 = export MPI_IB_RAILS=2 notes_035 = export MPI_CONNECTIONS_THRESHOLD=0 notes_040 = ulimit -s unlimited notes_045 = notes_050 = BIOS settings: notes_055 = AMI BIOS version 3.0 notes_060 = Hyper-Threading Technology enabled (default) notes_065 = Intel Turbo Boost Technology enabled (default) notes_070 = Intel Turbo Boost Technology activated in the OS via notes_075 = /etc/init.d/acpid start notes_080 = /etc/init.d/powersaved start notes_085 = powersave -f notes_090 = notes_095 = Job Placement: notes_100 = Each MPI job was assigned to a topologically compact set notes_105 = of nodes, i.e. the minimal needed number of switches was notes_110 = used for each job: 2 switches for up to 180 ranks, notes_115 = 4 switches for up to 320 ranks, 8 switches for 640 ranks, notes_120 = 10 switches for 800 ranks, 16 switches for 1280 ranks, notes_125 = 22 switches for 1920 ranks, and 30 switches for 2560 ranks. notes_130 = notes_135 = Additional notes regarding interconnect: notes_140 = The Infiniband network consists of two independent planes, notes_145 = with half the switches in the system allocated to each plane. notes_150 = I/O traffic is restricted to one plane, while MPI traffic can notes_155 = use both planes. # The following section was added automatically, and contains settings that # did not appear in the original configuration file, but were added to the # raw file after the run. default: interconnect_IOMPI_hw_switch_1_model000 = SGI FDR Integrated IB Switch Blade 2SW9x27 with interconnect_IOMPI_hw_switch_1_model001 = Mellanox SwitchX device 51000 interconnect_IOMPI_hw_topo = Enhanced Hypercube node_fileserver_hw_adapter_IB_model001 = (PCIe x8 Gen3 8 GT/s)