SPEC(R) MPIM2007 Summary Hewlett Packard Enterprise SGI 8600 (Intel Xeon Gold 6148, 2.40 GHz) Tue Oct 10 17:52:00 2017 MPI2007 License: 1 Test date: Oct-2017 Test sponsor: HPE Hardware availability: Jul-2017 Tested by: HPE Software availability: Nov-2017 Base Base Base Peak Peak Peak Benchmarks Ranks Run Time Ratio Ranks Run Time Ratio -------------- ------ --------- --------- ------ --------- --------- 104.milc 80 95.6 16.4 * 104.milc 80 95.6 16.4 S 104.milc 80 95.9 16.3 S 107.leslie3d 80 217 24.0 * 107.leslie3d 80 219 23.8 S 107.leslie3d 80 217 24.0 S 113.GemsFDTD 80 193 32.7 S 113.GemsFDTD 80 190 33.2 S 113.GemsFDTD 80 192 32.8 * 115.fds4 80 104 18.7 * 115.fds4 80 104 18.8 S 115.fds4 80 105 18.6 S 121.pop2 80 147 28.0 * 121.pop2 80 147 28.1 S 121.pop2 80 147 28.0 S 122.tachyon 80 123 22.7 S 122.tachyon 80 124 22.6 * 122.tachyon 80 150 18.6 S 126.lammps 80 152 19.2 * 126.lammps 80 152 19.2 S 126.lammps 80 152 19.1 S 127.wrf2 80 193 40.5 S 127.wrf2 80 194 40.3 * 127.wrf2 80 194 40.1 S 128.GAPgeofem 80 59.6 34.7 S 128.GAPgeofem 80 59.8 34.5 S 128.GAPgeofem 80 59.7 34.6 * 129.tera_tf 80 117 23.7 S 129.tera_tf 80 117 23.7 * 129.tera_tf 80 117 23.6 S 130.socorro 80 97.6 39.1 * 130.socorro 80 98.0 38.9 S 130.socorro 80 97.5 39.2 S 132.zeusmp2 80 118 26.2 * 132.zeusmp2 80 118 26.2 S 132.zeusmp2 80 118 26.3 S 137.lu 80 112 32.7 S 137.lu 80 113 32.6 * 137.lu 80 114 32.3 S ============================================================================== 104.milc 80 95.6 16.4 * 107.leslie3d 80 217 24.0 * 113.GemsFDTD 80 192 32.8 * 115.fds4 80 104 18.7 * 121.pop2 80 147 28.0 * 122.tachyon 80 124 22.6 * 126.lammps 80 152 19.2 * 127.wrf2 80 194 40.3 * 128.GAPgeofem 80 59.7 34.6 * 129.tera_tf 80 117 23.7 * 130.socorro 80 97.6 39.1 * 132.zeusmp2 80 118 26.2 * 137.lu 80 113 32.6 * SPECmpiM_base2007 26.5 SPECmpiM_peak2007 Not Run BENCHMARK DETAILS ----------------- Type of System: Homogeneous Total Compute Nodes: 2 Total Chips: 4 Total Cores: 80 Total Threads: 160 Total Memory: 384 GB Base Ranks Run: 80 Minimum Peak Ranks: -- Maximum Peak Ranks: -- C Compiler: Intel C Composer XE for Linux, Version 18.0.0.128 Build 20170811 C++ Compiler: Intel C++ Composer XE for Linux, Version 18.0.0.128 Build 20170811 Fortran Compiler: Intel Fortran Composer XE for Linux, Version 18.0.0.128 Build 20170811 Base Pointers: 64-bit Peak Pointers: Not Applicable MPI Library: HPE Performance Software - Message Passing Interface 2.17 Other MPI Info: OFED 3.2.2 Pre-processors: None Other Software: None Node Description: HPE XA730i Gen10 Server Node ============================================== HARDWARE -------- Number of nodes: 2 Uses of the node: compute Vendor: Hewlett Packard Enterprise Model: SGI 8600 (Intel Xeon Gold 6148, 2.40 GHz) CPU Name: Intel Xeon Gold 6148 CPU(s) orderable: 1-2 chips Chips enabled: 2 Cores enabled: 40 Cores per chip: 20 Threads per core: 2 CPU Characteristics: Intel Turbo Boost Technology up to 3.70 GHz CPU MHz: 2400 Primary Cache: 32 KB I + 32 KB D on chip per core Secondary Cache: 1 MB I+D on chip per core L3 Cache: 27.5 MB I+D on chip per chip Other Cache: None Memory: 192 GB (12 x 16 GB 2Rx4 PC4-2666V-R) Disk Subsystem: None Other Hardware: None Adapter: Mellanox MT27700 with ConnectX-4 ASIC Number of Adapters: 2 Slot Type: PCIe x16 Gen3 8GT/s Data Rate: InfiniBand 4X EDR Ports Used: 1 Interconnect Type: InfiniBand SOFTWARE -------- Adapter: Mellanox MT27700 with ConnectX-4 ASIC Adapter Driver: OFED-3.4-2.1.8.0 Adapter Firmware: 12.18.1000 Operating System: Red Hat Enterprise Linux Server 7.3 (Maipo), Kernel 3.10.0-514.2.2.el7.x86_64 Local File System: LFS Shared File System: LFS System State: Multi-user, run level 3 Other Software: SGI Management Center Compute Node 3.5.0, Build 716r171.rhel73-1705051353 Node Description: Lustre FS =========================== HARDWARE -------- Number of nodes: 4 Uses of the node: fileserver Vendor: Hewlett Packard Enterprise Model: Rackable C1104-GP2 (Intel Xeon E5-2690 v3, 2.60 GHz) CPU Name: Intel Xeon E5-2690 v3 CPU(s) orderable: 1-2 chips Chips enabled: 2 Cores enabled: 24 Cores per chip: 12 Threads per core: 1 CPU Characteristics: Intel Turbo Boost Technology up to 3.50 GHz Hyper-Threading Technology disabled CPU MHz: 2600 Primary Cache: 32 KB I + 32 KB D on chip per core Secondary Cache: 256 KB I+D on chip per core L3 Cache: 30 MB I+D on chip per chip Other Cache: None Memory: 128 GB (8 x 16 GB 2Rx4 PC4-2133P-R) Disk Subsystem: 684 TB RAID 6 48 x 8+2 2TB 7200 RPM Other Hardware: None Adapter: Mellanox MT27700 with ConnectX-4 ASIC Number of Adapters: 2 Slot Type: PCIe x16 Gen3 Data Rate: InfiniBand 4X EDR Ports Used: 1 Interconnect Type: InfiniBand SOFTWARE -------- Adapter: Mellanox MT27700 with ConnectX-4 ASIC Adapter Driver: OFED-3.3-1.0.0.0 Adapter Firmware: 12.14.2036 Operating System: Red Hat Enterprise Linux Server 7.3 (Maipo), Kernel 3.10.0-514.2.2.el7.x86_64 Local File System: ext3 Shared File System: LFS System State: Multi-user, run level 3 Other Software: None Interconnect Description: InfiniBand (MPI and I/O) ================================================== HARDWARE -------- Vendor: Mellanox Technologies and SGI Model: SGI P0002145 Switch Model: SGI P0002145 Number of Switches: 1 Number of Ports: 36 Data Rate: InfiniBand 4X EDR Firmware: 11.0350.0394 Topology: Enhanced Hypercube Primary Use: MPI and I/O traffic Base Tuning Notes ----------------- src.alt used: 129.tera_tf->add_rank_support src.alt used: 130.socorro->nullify_ptrs Submit Notes ------------ The config file option 'submit' was used. General Notes ------------- Software environment: export MPI_REQUEST_MAX=65536 export MPI_TYPE_MAX=32768 export MPI_IB_RAILS=2 export MPI_IB_IMM_UPGRADE=false export MPI_CONNECTIONS_THRESHOLD=0 export MPI_IB_DCIS=2 export MPI_IB_HYPER_LAZY=false ulimit -s unlimited BIOS settings: AMI BIOS version SAED7177, 07/17/2017 Job Placement: Each MPI job was assigned to a topologically compact set of nodes. Additional notes regarding interconnect: The Infiniband network consists of two independent planes, with half the switches in the system allocated to each plane. I/O traffic is restricted to one plane, while MPI traffic can use both planes. Base Compiler Invocation ------------------------ C benchmarks: icc C++ benchmarks: 126.lammps: icpc Fortran benchmarks: ifort Benchmarks using both Fortran and C: icc ifort Base Portability Flags ---------------------- 121.pop2: -DSPEC_MPI_CASE_FLAG 127.wrf2: -DSPEC_MPI_CASE_FLAG -DSPEC_MPI_LINUX 130.socorro: -assume nostd_intent_in Base Optimization Flags ----------------------- C benchmarks: -O3 -xCORE-AVX512 -no-prec-div -ipo C++ benchmarks: 126.lammps: -O3 -xCORE-AVX512 -no-prec-div -ansi-alias -ipo Fortran benchmarks: -O3 -xCORE-AVX512 -no-prec-div -ipo Benchmarks using both Fortran and C: -O3 -xCORE-AVX512 -no-prec-div -ipo Base Other Flags ---------------- C benchmarks: -lmpi C++ benchmarks: 126.lammps: -lmpi Fortran benchmarks: -lmpi Benchmarks using both Fortran and C: -lmpi The flags file that was used to format this result can be browsed at http://www.spec.org/mpi2007/flags/HPE_x86_64_Intel18_flags.html You can also download the XML flags source by saving the following link: http://www.spec.org/mpi2007/flags/HPE_x86_64_Intel18_flags.xml SPEC and SPEC MPI are registered trademarks of the Standard Performance Evaluation Corporation. All other brand and product names appearing in this result are trademarks or registered trademarks of their respective holders. ----------------------------------------------------------------------------- For questions about this result, please contact the tester. For other inquiries, please contact webmaster@spec.org. Copyright 2006-2010 Standard Performance Evaluation Corporation Tested with SPEC MPI2007 v2.0.1. Report generated on Wed Oct 25 17:11:42 2017 by MPI2007 ASCII formatter v1463. Originally published on 25 October 2017.