Compiler Invocation:
  C:   cc
  F90: f90
  F77: f77
 
Base Tuning:
  C:       -fast -xopenmp -xipo=2 -xprefetch_level=3 -xcode=abs44 
           -m64 -lmtmalloc -xpagesize=4m -xprefetch=latx:3
           -Xc -xprofile 
  Fortran: -fast -openmp -xcode=abs44 -m64 -xipo=2 -autopar
           -fma=fused -xpagesize=4m -xprefetch=latx:3 -xprofile 
  ONESTEP=yes
       
Peak Tuning:
  ONESTEP=yes 
   
  311.wupwise_l: -fast -openmp -autopar -xcode=abs44 -m32 -xipo=2 
                 -fma=fused -xpagesize=512k -xprefetch_level=3 
                 -Qoption iropt -Athr,-Apf:l2subblock=256,-Apf:ipa=9 
                 -xprefetch=latx:3 -xprofile 
  313.swim_l:    -fast -openmp -m64 -xipo=2 -autopar -xcode=abs44 
                 -xpagesize=512k -xprefetch=latx:3 -xprofile
  315.mgrid_l:   -fast -openmp -xipo=2 -xprefetch_level=3
                 -Qoption iropt -Apf:largedim,-Apf:l2subblock=256 
                 -m64 -xcode=abs44 -xpagesize=512k -xprefetch=latx:5 
                 -xprofile
  317.applu_l:   -fast -openmp -xipo=2 -xcode=abs44 -m64 -fma=fused 
                 -xpagesize=4m -Qoption iropt -Aujam:inner=g,
                 -Apf:l2subblock=256  -xprefetch=latx:3 -xprofile
  321.equake_l:  -fast -xopenmp -xipo=2 -xcode=abs44 -xrestrict 
                 -xprefetch_level=3 -lmtmalloc -m64 -xpagesize=64k 
                 -W2,-Apf:l2subblock=256  -xprefetch=latx:3
                 -xprofile
  325.apsi_l:    -fast -openmp -xcode=abs44 -xipo=2 -m64 
                 -xpagesize=4m -lmtmalloc -xprefetch=latx:3
                 -xprofile
  327.gafort_l:  basepeak=yes
  329.fma3d_l:   basepeak=yes
  331.art_l:     basepeak=yes
  
Portability flags:
  318.galgel_l:  -e -fixed
   
Extra art allowed flags:
  331.art_l:     -DINTS_PER_CACHELINE=16 -DDBLS_PER_CACHELINE=8
   
Alternate Source for Peak:
  Approved alternate source ompl.dd was used for 325.apsi_l.
  Change initial data distribution for WORK array
  ompl2001-dd-20040128.tar.gz  
   
Feedback optimization (-xprofile) is done as follows,
unless otherwise noted:
  fdo_pre0:  rm -rf `pwd`/feedback.profile
  PASS1:     -xprofile=collect:./feedback
  PASS2:     -xprofile=use:./feedback
   
Base and Peak User Environment:
  setenv SUNW_MP_PROCBIND "0 2 4 6 8 10 12 14 16 18 
    20 22 24 26 28 30 32 34 36 38 40 42 44 46 48 50 
    52 54 56 58 60 62 64 66 68 70 72 74 76 78 80 82 
    84 86 88 90 92 94 96 98 100 102 104 106 108 110 
    112 114 116 118 120 122 124 126 128 130 132 134 
    136 138 140 142 144 146 148 150 152 154 156 158 
    160 162 164 166 168 170 172 174 176 178 180 182 
    184 186 188 190 192 194 196 198 200 202 204 206
    208 210 212 214 216 218 220 222 224 226 228 230
    232 234 236 238 240 242 244 246 248 250 252 254"
  setenv SUNW_MP_THR_IDLE SPIN
   
Kernel Paramters (/etc/system):
  set autoup=900
  set tune_t_fsflushr=3
   
System configuration details located at
   http://www.sun.com/servers/
   
For a description of Sun Studio 12 Compiler flags, portability flags
and system parameters used to generate this result, please refer to
SUN-20070503-Studio-Solaris-sparc.txt file in the flags directory.
   
This result was measured on Sun SPARC Enterprise M9000.
The Sun SPARC Enterprise M9000 and the Fujitsu SPARC Enterprise
M9000 are electrically equivalent.