| CPU2006 license: | 19 | Test date: | Jan-2011 |
|---|---|---|---|
| Test sponsor: | Fujitsu | Hardware Availability: | Feb-2011 |
| Tested by: | Fujitsu | Software Availability: | Jan-2011 |
| Hardware | |
|---|---|
| CPU Name: | Intel Xeon E5606 |
| CPU Characteristics: | |
| CPU MHz: | 2133 |
| FPU: | Integrated |
| CPU(s) enabled: | 4 cores, 1 chip, 4 cores/chip |
| CPU(s) orderable: | 1,2 chips |
| Primary Cache: | 32 KB I + 32 KB D on chip per core |
| Secondary Cache: | 256 KB I+D on chip per core |
| L3 Cache: | 8 MB I+D on chip per chip |
| Other Cache: | None |
| Memory: | 24 GB (6 x 4 GB 2Rx4 PC3-10600R-9, ECC, running at 1067 MHz and CL7) |
| Disk Subsystem: | 1 x SAS, 300 GB, 10000 RPM |
| Other Hardware: | -- |
| Software | |
|---|---|
| Operating System: | SUSE Linux Enterprise Server 11 (x86_64) with SP1, Kernel 2.6.32.12-0.7-default |
| Compiler: | Intel C++ Compiler XE for applications running on IA-32 Version 12.0.1.116 Build 20101116 |
| Auto Parallel: | No |
| File System: | ext3 |
| System State: | Run level 3 (multi-user) |
| Base Pointers: | 32-bit |
| Peak Pointers: | 32/64-bit |
| Other Software: | Microquill SmartHeap V9.01 Binaries compiled on RHEL5.5 with binutils-2.17.50.0.6-14.el5 |
| Benchmark | Base | Peak | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Copies | Seconds | Ratio | Seconds | Ratio | Seconds | Ratio | Copies | Seconds | Ratio | Seconds | Ratio | Seconds | Ratio | |
| Results appear in the order in which they were run. Bold underlined text indicates a median measurement. | ||||||||||||||
| 400.perlbench | 4 | 623 | 62.7 | 624 | 62.6 | 625 | 62.6 | 4 | 522 | 74.8 | 525 | 74.5 | 522 | 74.8 |
| 401.bzip2 | 4 | 917 | 42.1 | 917 | 42.1 | 920 | 42.0 | 4 | 833 | 46.3 | 832 | 46.4 | 832 | 46.4 |
| 403.gcc | 4 | 508 | 63.4 | 508 | 63.4 | 506 | 63.6 | 4 | 508 | 63.4 | 508 | 63.4 | 506 | 63.6 |
| 429.mcf | 4 | 344 | 106 | 344 | 106 | 343 | 106 | 4 | 321 | 114 | 323 | 113 | 324 | 113 |
| 445.gobmk | 4 | 678 | 61.9 | 678 | 61.9 | 678 | 61.9 | 4 | 659 | 63.7 | 659 | 63.7 | 658 | 63.8 |
| 456.hmmer | 4 | 363 | 103 | 362 | 103 | 361 | 103 | 4 | 309 | 121 | 310 | 121 | 309 | 121 |
| 458.sjeng | 4 | 744 | 65.1 | 744 | 65.1 | 744 | 65.0 | 4 | 704 | 68.8 | 704 | 68.8 | 704 | 68.8 |
| 462.libquantum | 4 | 217 | 382 | 219 | 379 | 219 | 379 | 4 | 217 | 382 | 219 | 379 | 219 | 379 |
| 464.h264ref | 4 | 834 | 106 | 835 | 106 | 834 | 106 | 4 | 820 | 108 | 821 | 108 | 820 | 108 |
| 471.omnetpp | 4 | 439 | 56.9 | 440 | 56.8 | 439 | 56.9 | 4 | 403 | 62.0 | 403 | 62.1 | 403 | 62.1 |
| 473.astar | 4 | 594 | 47.3 | 593 | 47.3 | 592 | 47.5 | 4 | 594 | 47.3 | 593 | 47.3 | 592 | 47.5 |
| 483.xalancbmk | 4 | 331 | 83.5 | 331 | 83.4 | 331 | 83.4 | 4 | 331 | 83.5 | 331 | 83.4 | 331 | 83.4 |
The config file option 'submit' was used. numactl was used to bind copies to the cores
'ulimit -s unlimited' was used to set the stacksize to unlimited prior to run Large pages were not enabled for this run
BIOS configuration: Data Reuse Optimization = Disable
For information about Fujitsu please visit: http://www.fujitsu.com
| 400.perlbench: | -DSPEC_CPU_LINUX_IA32 |
| 462.libquantum: | -DSPEC_CPU_LINUX |
| 483.xalancbmk: | -DSPEC_CPU_LINUX |
| -xSSE4.2 -ipo -O3 -no-prec-div -opt-prefetch -B /usr/share/libhugetlbfs/ -Wl,-hugetlbfs-link=BDT |
| -xSSE4.2 -ipo -O3 -no-prec-div -opt-prefetch -Wl,-z,muldefs -L/smartheap -lsmartheap -B /usr/share/libhugetlbfs/ -Wl,-hugetlbfs-link=BDT |
| icc -m32 | |
| 400.perlbench: | icc -m64 |
| 401.bzip2: | icc -m64 |
| 456.hmmer: | icc -m64 |
| 458.sjeng: | icc -m64 |
| icpc -m32 |
| 400.perlbench: | -DSPEC_CPU_LP64 -DSPEC_CPU_LINUX_X64 |
| 401.bzip2: | -DSPEC_CPU_LP64 |
| 456.hmmer: | -DSPEC_CPU_LP64 |
| 458.sjeng: | -DSPEC_CPU_LP64 |
| 462.libquantum: | -DSPEC_CPU_LINUX |
| 483.xalancbmk: | -DSPEC_CPU_LINUX |
| 471.omnetpp: | -xSSE4.2(pass 2) -prof-gen(pass 1) -ipo(pass 2) -O3(pass 2) -no-prec-div(pass 2) -prof-use(pass 2) -ansi-alias -opt-ra-region-strategy=block -Wl,-z,muldefs -L/smartheap -lsmartheap |
| 473.astar: | basepeak = yes |
| 483.xalancbmk: | basepeak = yes |