SPECpower_ssj2008 Copyright (C) 2007-2014 Standard Performance Evaluation Corporation Fujitsu FUJITSU Server PRIMERGY CX2550 M1 SPECpower_ssj2008 = 9,971 overall ssj_ops/watt Test Sponsor: Fujitsu SPEC License #: 19 Tested By: Fujitsu Test Location: Paderborn, NRW, Germany Test Date: Nov 15, 2014 Publication: Dec 10, 2014 Hardware Availability: Dec-2014 Software Availability: Jun-2013 Test Method: Multi Node System Source: Single Supplier System Designation: Server Power Provisioning: Line-powered Benchmark Results Summary Performance | Power | Performance | | to Power | | Ratio Target Load | Actual Load | ssj_ops | Average | | | | Active Power | | | | (W) | ------------- | ------------- | ------------- | ------------- | ------------- 100% | 100.0% | 12,913,912 | 1,152 | 11,206 90% | 90.0% | 11,626,095 | 1,036 | 11,225 80% | 80.0% | 10,327,585 | 914 | 11,297 70% | 70.1% | 9,048,447 | 791 | 11,441 60% | 60.0% | 7,752,149 | 681 | 11,382 50% | 49.9% | 6,449,897 | 602 | 10,708 40% | 40.0% | 5,168,294 | 538 | 9,611 30% | 30.0% | 3,878,894 | 474 | 8,177 20% | 20.0% | 2,586,185 | 415 | 6,228 10% | 10.0% | 1,293,707 | 350 | 3,698 Active Idle | 0 | 171 | 0 sum of ssj_ops / sum of power = | 9,971 Aggregate SUT Data # of Nodes | # of Chips | # of Cores | # of | Total RAM | # of OS Images | # of JVM | | | Threads | (GB) | | Instances ---------- | ---------- | ---------- | ---------- | ---------- | -------------- | --------- 4 | 8 | 144 | 288 | 256 | 4 | 144 System Under Test Shared Hardware SHARED HARDWARE Enclosure: PRIMERGY CX400 M1 Form Factor: 2U Power Supply Quantity and Rating 2 x 1600 (W): Power Supply Details: Fujitsu Technology Solutions S26113-F617-E50 Network Switch: DLink DGS-3024 Network Switch Details: 24-Port Gigabit Switch KVM Switch: None KVM Switch Details: None Other Hardware: None Comment: Network switch is a standalone device and is not included in the measured power. Set: 'CX2550 M1' Set Identifier: CX2550 M1 Set Description: System Under Test # of Identical Nodes: 4 Comment: Multi Node HARDWARE PER NODE Hardware Vendor: Fujitsu Model: FUJITSU Server PRIMERGY CX2550 M1 Form Factor: Blade CPU Name: Intel Xeon E5-2699 v3 CPU Characteristics: 18-Core, 2.30GHz, 45MB L3 Cache CPU Frequency (MHz): 2300 CPU(s) Enabled: 36 cores, 2 chips, 18 cores/chip Hardware Threads: 72 (2 / core) CPU(s) Orderable: 1,2 chips Primary Cache: 32 KB I + 32 KB D on chip per core Secondary Cache: 256 KB I+D on chip per core Tertiary Cache: 45 MB I+D on chip per chip Other Cache: None Memory Amount (GB): 64 # and size of DIMM: 8 x 8192 MB Memory Details: 8 GB DDR4, registered, ECC, 2133 MHz, PC4-2133R, DIMM, 2Rx8; slots 1A, 1B, 1C, 1D, 1E, 1F, 1G, 1H populated Power Supply Quantity and Rating None (W): Power Supply Details: N/A Disk Drive: 1 x SSD SATA 6G 64GB DOM N H-P, S26361-F5523-E64 Disk Controller: Integrated SATA Controller # and type of Network Interface 2 x Intel I350 Gigabit Network Connection Cards (NICs) Installed: (onboard) NICs Enabled in Firmware / OS / 1/1/1 Connected: Network Speed (Mbit): 1000 Keyboard: None Mouse: None Monitor: None Optical Drives: No Other Hardware: None SOFTWARE PER NODE Power Management: Enabled ("Fujitsu Enhanced Power Settings" power plan) Operating System (OS): Microsoft Windows Server 2008 R2 Enterprise SP1 OS Version: Version 6.1.7601 Service Pack 1 Build 7601 Filesystem: NTFS JVM Vendor: IBM Corporation JVM Version: IBM J9 VM (build 2.6, JRE 1.7.0 Windows Server 2008 R2 amd64-64 20120322_106209 (JIT enabled, AOT enabled) JVM Command-line Options: -Xmn825m -Xms975m -Xmx975m -Xaggressive -Xcompressedrefs -Xgcpolicy:gencon -XlockReservation -Xnoloa -XtlhPrefetch -Xlp -Xconcurrentlevel0 -Xthr:minimizeusercpu -Xgcthreads2 (-Xgcthreads1 for JVM5 and JVM23) JVM Affinity: start /NODE [0,1,2,3] /AFFINITY [0x3,0xC,0x30,0xC0,0x300,0xC00,0x3000,0xC000 ,0x30000] JVM Instances: 36 JVM Initial Heap (MB): 975 JVM Maximum Heap (MB): 975 JVM Address Bits: 64 Boot Firmware Version: R1.7.0 Management Firmware Version: 7.64F Workload Version: SSJ 1.2.10 Director Location: Controller Other Software: IBM WebSphere Application Server V8.5.0.0, Microsoft Hotfix for Windows (KB2510206) Boot Firmware Settings * Set "Hardware Prefetcher = Disabled" in BIOS. * Set "Adjacent Cache Line Prefetch = Disabled" in BIOS. * Set "DCU Streamer Prefetcher = Disabled" in BIOS. * Set "Onboard USB Controllers = Disabled" in BIOS. * Set "Power Technology = Custom" in BIOS. * Set "QPI Link Frequency Select = 6.4 GT/s" in BIOS. * Set "Turbo Mode = Disabled" in BIOS. * Set "Intel Virtualization Technology = Disabled" in BIOS. * Set "ASPM Support = L1 Only" in BIOS. * Set "PCIe Hot Plug = Disable" in BIOS. * Set "DMI Control = Gen1" in BIOS. * Set "LAN Controller = LAN 1" in BIOS. * Set "COD Enable = Enabled" in BIOS. * Set "Early Snoop = Disabled" in BIOS. Management Firmware Settings None System Under Test Notes * Set "Turn off hard disk after = 1 Minute" in OS. * Using the local security settings console, "lock pages in memory" was enabled for the user running the benchmark. * Benchmark was started via Windows Remote Desktop Connection. * Microsoft Hotfix KB2510206 has been installed due to known problems of the group assignment algorithm which does not create a balanced group assignment. For more information see: http://support.microsoft.com/kb/2510206 Controller System HARDWARE Hardware Vendor: Fujitsu Model: PRIMERGY RX200 S6 CPU Description: Intel Xeon X5680 Memory amount (GB): 48 SOFTWARE Operating System (OS): Microsoft Windows Server 2008 R2 Enterprise SP1 JVM Vendor: Oracle Corporation JVM Version: Oracle Java HotSpot(TM) 64-Bit Server VM (build 23.25-b01, mixed mode) CCS Version: 1.2.6 Measurement Devices POWER ANALYZER PWR1 Hardware Vendor: ZES Zimmer Electronic Systems GmbH Model: LMG95 Serial Number: 11770806 Connectivity: RS-232 Input Connection: Default (20A) Metrology Institute: PTB (Physikalisch Technische Bundesanstalt) Accredited by: Atlas Copco Tools Central Europe GmbH Calibration Label: W13088001 Date of Calibration: 15-Sep-2014 PTDaemon Host System: same as CCS PTDaemon Host OS: same as CCS PTDaemon Version: 1.7.0-538b1562-20140802 Setup Description: Connected to PSU 1 and PSU 2 TEMPERATURE SENSOR TEMP1 Hardware Vendor: Digi International Inc. Model: Watchport/H Driver Version: Watchport Virtual Port 5.70.105.0 Connectivity: USB PTDaemon Host System: same as CCS PTDaemon Host OS: same as CCS Setup Description: 5 mm in front of SUT main air intake Notes * SPECpower_ssj.props input.load_level.number_warehouses set to 72 due to a known inconsistency in processor reporting with this Java version. Aggregate Electrical and Environmental Data Target Load | Average | Minimum | Active | Ambient | Power (W) | Temperature | | (Degrees C) ----------- | ---------- | ------------- 100% | 1,152 | 21.2 90% | 1,036 | 21.2 80% | 914 | 21.2 70% | 791 | 21.1 60% | 681 | 21.1 50% | 602 | 21.1 40% | 538 | 21.1 30% | 474 | 21.1 20% | 415 | 21.1 10% | 350 | 21.1 Active Idle | 171 | 21.0 Line Standard | Minimum | Elevation (m) | Temperature | | (Degrees C) | ------------------------- | --------------- | --------------- 230V / 50 Hz / 1 phase / | 21.0 | 117 2 wires | | See the Power/Temperature Details Report (power_ssj2008-20141125-00680-power.txt) for additional details. Aggregate Performance Data Target Load | Actual Load | ssj_ops | | Target | Actual ----------------- | ----------------- | ----------------- | ----------------- Calibration 1 | | | 12,259,384 Calibration 2 | | | 12,896,277 Calibration 3 | | | 12,908,904 Calibration 4 | | | 12,923,689 ssj_ops@calibrated=12,916,297 100% | 100.0% | 12,916,297 | 12,913,912 90% | 90.0% | 11,624,667 | 11,626,095 80% | 80.0% | 10,333,037 | 10,327,585 70% | 70.1% | 9,041,408 | 9,048,447 60% | 60.0% | 7,749,778 | 7,752,149 50% | 49.9% | 6,458,148 | 6,449,897 40% | 40.0% | 5,166,519 | 5,168,294 30% | 30.0% | 3,874,889 | 3,878,894 20% | 20.0% | 2,583,259 | 2,586,185 10% | 10.0% | 1,291,630 | 1,293,707 Active Idle | | 0 | 0 See the Aggregate Performance Report (power_ssj2008-20141125-00680.CX2550 M1.txt) for additional details. Copyright (C) 2007-2014 Standard Performance Evaluation Corporation http://www.spec.org - info@spec.org SPECpower_ssj2008 Reporter Version: [SSJ 1.2.9, July 28, 2011]