| Dell Inc. PowerEdge R730 (Intel Xeon E5-2699 v4 2.20 GHz) | SPECpower_ssj2008 = 10,802 overall ssj_ops/watt | ||||
| Test Sponsor: | Dell Inc. | SPEC License #: | 55 | Test Method: | Single Node |
| Tested By: | Dell Inc. | Test Location: | Round Rock, TX, USA | Test Date: | Mar 28, 2016 |
| Hardware Availability: | Mar-2016 | Software Availability: | Apr-2015 | Publication: | Apr 15, 2016 |
| System Source: | Single Supplier | System Designation: | Server | Power Provisioning: | Line-powered |
| Performance | Power | Performance to Power Ratio | ||
|---|---|---|---|---|
| Target Load | Actual Load | ssj_ops | Average Active Power (W) | |
| 100% | 99.4% | 3,341,589 | 269 | 12,429 |
| 90% | 90.4% | 3,038,834 | 236 | 12,852 |
| 80% | 79.7% | 2,679,252 | 205 | 13,098 |
| 70% | 69.6% | 2,340,874 | 182 | 12,844 |
| 60% | 60.0% | 2,016,068 | 166 | 12,180 |
| 50% | 50.0% | 1,680,601 | 152 | 11,040 |
| 40% | 40.1% | 1,347,418 | 138 | 9,735 |
| 30% | 30.0% | 1,009,827 | 122 | 8,263 |
| 20% | 19.9% | 670,112 | 105 | 6,367 |
| 10% | 10.0% | 337,218 | 88.4 | 3,815 |
| Active Idle | 0 | 44.9 | 0 | |
| ∑ssj_ops / ∑power = | 10,802 | |||
| Set Identifier: | sut |
| Set Description: | System Under Test |
| # of Identical Nodes: | 1 |
| Comment: | PowerEdge R730 |
| Hardware | |
|---|---|
| Hardware Vendor: | Dell Inc. |
| Model: | PowerEdge R730 (Intel Xeon E5-2699 v4 2.20 GHz) |
| Form Factor: | 2U |
| CPU Name: | Intel Xeon E5-2699 v4 2.20 GHz |
| CPU Characteristics: | 22 core, 2.20 GHz, 55 MB L3 Cache |
| CPU Frequency (MHz): | 2200 |
| CPU(s) Enabled: | 44 cores, 2 chips, 22 cores/chip |
| Hardware Threads: | 88 (2 / core) |
| CPU(s) Orderable: | 1,2 chips |
| Primary Cache: | 32 KB I + 32 KB D on chip per core |
| Secondary Cache: | 256 KB I+D on chip per core |
| Tertiary Cache: | 55 MB I+D on chip per chip |
| Other Cache: | None |
| Memory Amount (GB): | 128 |
| # and size of DIMM: | 8 x 16 GB |
| Memory Details: | 16GB 2Rx8 PC4-2400T ECC; Dell p/n HNDJ7, Slots A1-4,B1-4 populated. |
| Power Supply Quantity and Rating (W): | 1 x 750 |
| Power Supply Details: | Dell p/n KNHJV |
| Disk Drive: | 1 x 120 GB SATA SSD, Dell p/n KX83R |
| Disk Controller: | Native Chipset SATA |
| # and type of Network Interface Cards (NICs) Installed: | 1 x quad-port Broadcom 5720, Dell P/N FM487 |
| NICs Enabled in Firmware / OS / Connected: | 4/4/1 |
| Network Speed (Mbit): | 1000 |
| Keyboard: | None |
| Mouse: | None |
| Monitor: | None |
| Optical Drives: | No |
| Other Hardware: | None |
| Software | |
|---|---|
| Power Management: | Power saver power plan in OS |
| Operating System (OS): | Microsoft Windows Server 2012 R2 Datacenter |
| OS Version: | Version 6.3.9600.17196 |
| Filesystem: | NTFS |
| JVM Vendor: | Oracle Corporation |
| JVM Version: | Java HotSpot 64-Bit Server VM (build 24.80-b11, mixed mode), version 1.7.0_80 |
| JVM Command-line Options: | -server -Xmx1024m -Xms1024m -Xmn800m -XX:SurvivorRatio=60 -XX:TargetSurvivorRatio=90 -XX:ParallelGCThreads=4 -XX:AllocatePrefetchDistance=256 -XX:AllocatePrefetchLines=4 -XX:LoopUnrollLimit=45 -XX:InitialTenuringThreshold=12 -XX:MaxTenuringThreshold=15 -XX:InlineSmallCode=3900 -XX:MaxInlineSize=270 -XX:FreqInlineSize=2500 -XX:+UseLargePages -XX:+UseParallelOldGC -XX:+OptimizeStringConcat -XX:+UseStringCache -XX:+AggressiveOpts |
| JVM Affinity: | start /NODE [0,1,2,3] /AFFINITY [0x3,0xC,0x30,0xC0,0x300,0xC00,0x3000,0xC000,0x30000,0xC0000,0x300000] |
| JVM Instances: | 44 |
| JVM Initial Heap (MB): | 1024 |
| JVM Maximum Heap (MB): | 1024 |
| JVM Address Bits: | 64 |
| Boot Firmware Version: | 2.0.1 |
| Management Firmware Version: | 2.30.30.30 |
| Workload Version: | SSJ 1.2.10 |
| Director Location: | Controller |
| Other Software: | none |
| Hardware | |
|---|---|
| Hardware Vendor: | Dell Inc |
| Model: | PowerEdge R410 |
| CPU Description: | Intel Xeon E5160, 3.00 GHz |
| Memory amount (GB): | 8.0 |
| Software | |
|---|---|
| Operating System (OS): | Microsoft Windows Server 2008 R2 Enterprise Edition Service Pack 1 |
| JVM Vendor: | Oracle Corporation |
| JVM Version: | Hotspot(TM) Client VM, version 1.8.0_73 |
| CCS Version: | 1.2.6 |
| Power Analyzer pwr1 | |
|---|---|
| Hardware Vendor: | Yokogawa Meters and Instruments Corporation |
| Model: | WT210 |
| Serial Number: | 91K308530 |
| Connectivity: | RS-232 |
| Input Connection: | Default |
| Metrology Institute: | NIST |
| Accredited by: | SIMCO |
| Calibration Label: | 6995453 |
| Date of Calibration: | 6-Jul-2015 |
| PTDaemon Host System: | same as CCS |
| PTDaemon Host OS: | same as CCS |
| PTDaemon Version: | 1.8.0-efc0c004-20160120 |
| Setup Description: | Connected to power supply |
| Temperature Sensor temp1 | |
|---|---|
| Hardware Vendor: | Digi International Inc. |
| Model: | Watchport/H |
| Driver Version: | 5.10.26.0 |
| Connectivity: | USB |
| PTDaemon Host System: | same as CCS |
| PTDaemon Host OS: | same as CCS |
| Setup Description: | 25 mm in front of SUT main airflow intake |
| Target Load | Average Active Power (W) | Minimum Ambient Temperature (°C) |
|---|---|---|
| 100% | 269 | 20.8 |
| 90% | 236 | 20.9 |
| 80% | 205 | 20.9 |
| 70% | 182 | 20.9 |
| 60% | 166 | 20.9 |
| 50% | 152 | 20.9 |
| 40% | 138 | 20.8 |
| 30% | 122 | 20.8 |
| 20% | 105 | 20.7 |
| 10% | 88.4 | 20.6 |
| Active Idle | 44.9 | 20.5 |
| Line Standard | Minimum Temperature (°C) | Elevation (m) |
|---|---|---|
| 208V / 60 Hz / 1 phase / 2 wires | 20.5 | 255 |
| Target Load | Actual Load | ssj_ops | |
|---|---|---|---|
| Target | Actual | ||
| Calibration 1 | 3,375,414 | ||
| Calibration 2 | 3,392,299 | ||
| Calibration 3 | 3,332,626 | ||
| ssj_ops@calibrated=3,362,463 | |||
| 100% | 99.4% | 3,362,463 | 3,341,589 |
| 90% | 90.4% | 3,026,216 | 3,038,834 |
| 80% | 79.7% | 2,689,970 | 2,679,252 |
| 70% | 69.6% | 2,353,724 | 2,340,874 |
| 60% | 60.0% | 2,017,478 | 2,016,068 |
| 50% | 50.0% | 1,681,231 | 1,680,601 |
| 40% | 40.1% | 1,344,985 | 1,347,418 |
| 30% | 30.0% | 1,008,739 | 1,009,827 |
| 20% | 19.9% | 672,493 | 670,112 |
| 10% | 10.0% | 336,246 | 337,218 |
| Active Idle | 0 | 0 | |