| Hewlett Packard Enterprise ProLiant DL385 Gen10 | SPECpower_ssj2008 = 11,044 overall ssj_ops/watt | ||||
| Test Sponsor: | Hewlett Packard Enterprise | SPEC License #: | 3 | Test Method: | Single Node |
| Tested By: | Hewlett Packard Enterprise | Test Location: | Houston, TX, USA | Test Date: | Mar 16, 2018 |
| Hardware Availability: | Jan-2018 | Software Availability: | Oct-2017 | Publication: | May 1, 2018 |
| System Source: | Single Supplier | System Designation: | Server | Power Provisioning: | Line-powered |
| Performance | Power | Performance to Power Ratio | ||
|---|---|---|---|---|
| Target Load | Actual Load | ssj_ops | Average Active Power (W) | |
| 100% | 99.8% | 4,295,252 | 298 | 14,423 |
| 90% | 89.9% | 3,866,000 | 271 | 14,244 |
| 80% | 79.8% | 3,433,541 | 248 | 13,871 |
| 70% | 69.9% | 3,009,106 | 220 | 13,706 |
| 60% | 60.0% | 2,580,804 | 199 | 12,969 |
| 50% | 49.9% | 2,148,432 | 193 | 11,110 |
| 40% | 40.0% | 1,720,665 | 179 | 9,607 |
| 30% | 30.0% | 1,290,277 | 165 | 7,817 |
| 20% | 20.0% | 859,238 | 150 | 5,712 |
| 10% | 10.0% | 430,149 | 136 | 3,174 |
| Active Idle | 0 | 81.1 | 0 | |
| ∑ssj_ops / ∑power = | 11,044 | |||
| Set Identifier: | SUT |
| Set Description: | System Under Test |
| # of Identical Nodes: | 1 |
| Comment: | SUT |
| Hardware | |
|---|---|
| Hardware Vendor: | Hewlett Packard Enterprise |
| Model: | ProLiant DL385 Gen10 |
| Form Factor: | 2U |
| CPU Name: | AMD EPYC 7601 2.20 GHz |
| CPU Characteristics: | 32-Core, 2.20GHz 64MB L3 Cache |
| CPU Frequency (MHz): | 2200 |
| CPU(s) Enabled: | 64 cores, 2 chips, 32 cores/chip |
| Hardware Threads: | 128 (2 / core) |
| CPU(s) Orderable: | 1,2 chips |
| Primary Cache: | 32 KB I + 32 KB D on chip per core |
| Secondary Cache: | 512 KB I+D on chip per core |
| Tertiary Cache: | 64 MB I+D on chip per core |
| Other Cache: | None |
| Memory Amount (GB): | 128 |
| # and size of DIMM: | 16 x 8192 MB |
| Memory Details: | 8GB 1Rx8 PC4-2666V-R slots 1, 3, 5, 7, 10, 12, 14 & 16 on each socket |
| Power Supply Quantity and Rating (W): | 1 x 800 |
| Power Supply Details: | HPE 800W Flex Slot Titanium Hot Plug Low Halogen Power Supply Kit (865438-B21) |
| Disk Drive: | 1 x HPE 480GB SATA M.2 (880877-B21) |
| Disk Controller: | embedded SATA |
| # and type of Network Interface Cards (NICs) Installed: | 1 x HPE Ethernet 1Gb 4-port 331i Adapter |
| NICs Enabled in Firmware / OS / Connected: | 4/1/1 |
| Network Speed (Mbit): | 1000 |
| Keyboard: | None |
| Mouse: | None |
| Monitor: | None |
| Optical Drives: | No |
| Other Hardware: | 1 x HPE High Performance Fan kit (867810-B21) |
| Software | |
|---|---|
| Power Management: | Enabled (see SUT Notes) |
| Operating System (OS): | Windows Server 2012 R2 Datacenter |
| OS Version: | Version 6.3 (Build 9600) |
| Filesystem: | NTFS |
| JVM Vendor: | Oracle Corporation |
| JVM Version: | Oracle Java HotSpot(TM) 64-Bit Server VM (build 24.80-b11, mixed mode), version 1.7.0_80 |
| JVM Command-line Options: | -server -Xmx6656m -Xms6656m -Xmn4500m -XX:SurvivorRatio=15 -XX:InlineSmallCode=8000 -XX:FreqInlineSize=8000 -XX:+UseLargePages -XX:+UseBiasedLocking -XX:ParallelGCThreads=8 -XX:+UseParallelOldGC -XX:+AggressiveOpts -XX:+OptimizeStringConcat -XX:AllocatePrefetchLines=7 -XX:MaxInlineSize=80 -XX:LoopUnrollLimit=30 -XX:AllocatePrefetchDistance=192 -XX:InitialTenuringThreshold=10 |
| JVM Affinity: | start /NODE[0,1,2,3,4,5,6,7] /AFFINITY [0xFF, 0xFF00] |
| JVM Instances: | 16 |
| JVM Initial Heap (MB): | 6656 |
| JVM Maximum Heap (MB): | 6656 |
| JVM Address Bits: | 64 |
| Boot Firmware Version: | A40 v1.20 (01/12/2018) |
| Management Firmware Version: | 1.20 Dec 15 2017 |
| Workload Version: | SSJ 1.2.10 |
| Director Location: | Controller |
| Other Software: | HPE Service Pack for ProLiant (SPP) Version 2017.10.1, Microsoft kb4025334 |
| Hardware | |
|---|---|
| Hardware Vendor: | Hewlett Packard Enterprise |
| Model: | ProLiant DL360 Gen9 |
| CPU Description: | 2x Intel Xeon E5-2660 v3 |
| Memory amount (GB): | 128 |
| Software | |
|---|---|
| Operating System (OS): | Windows Server 2012 R2 |
| JVM Vendor: | Oracle Corporation |
| JVM Version: | 1.8.0_161-b12 (build 25.161-b12, mixed mode) |
| CCS Version: | 1.2.6 |
| Power Analyzer pwr1 | |
|---|---|
| Hardware Vendor: | Yokogawa |
| Model: | WT310E |
| Serial Number: | C2QM22002V |
| Connectivity: | Yokogawa USB |
| Input Connection: | Default |
| Metrology Institute: | NIST |
| Accredited by: | TRANSCAT |
| Calibration Label: | 5-D537U-20-1 |
| Date of Calibration: | 28-Jul-2017 |
| PTDaemon Host System: | same as CCS |
| PTDaemon Host OS: | same as CCS |
| PTDaemon Version: | 1.8.1-260d064e-20161220 |
| Setup Description: | SUT Power Supply 1 |
| Temperature Sensor temp1 | |
|---|---|
| Hardware Vendor: | Digi International Inc. |
| Model: | Watchport/H |
| Driver Version: | 5.70.105.0 |
| Connectivity: | USB |
| PTDaemon Host System: | same as CCS |
| PTDaemon Host OS: | same as CCS |
| Setup Description: | 5 mm in front of SUT main intake |
| Target Load | Average Active Power (W) | Minimum Ambient Temperature (°C) |
|---|---|---|
| 100% | 298 | 21.7 |
| 90% | 271 | 21.8 |
| 80% | 248 | 21.8 |
| 70% | 220 | 21.7 |
| 60% | 199 | 21.7 |
| 50% | 193 | 21.6 |
| 40% | 179 | 21.4 |
| 30% | 165 | 21.4 |
| 20% | 150 | 21.6 |
| 10% | 136 | 21.6 |
| Active Idle | 81.1 | 21.6 |
| Line Standard | Minimum Temperature (°C) | Elevation (m) |
|---|---|---|
| 210V / 60 Hz / 1 phase / 2 wires | 21.4 | 132 |
| Target Load | Actual Load | ssj_ops | |
|---|---|---|---|
| Target | Actual | ||
| Calibration 1 | 4,301,156 | ||
| Calibration 2 | 4,303,561 | ||
| Calibration 3 | 4,300,393 | ||
| ssj_ops@calibrated=4,301,977 | |||
| 100% | 99.8% | 4,301,977 | 4,295,252 |
| 90% | 89.9% | 3,871,779 | 3,866,000 |
| 80% | 79.8% | 3,441,581 | 3,433,541 |
| 70% | 69.9% | 3,011,384 | 3,009,106 |
| 60% | 60.0% | 2,581,186 | 2,580,804 |
| 50% | 49.9% | 2,150,988 | 2,148,432 |
| 40% | 40.0% | 1,720,791 | 1,720,665 |
| 30% | 30.0% | 1,290,593 | 1,290,277 |
| 20% | 20.0% | 860,395 | 859,238 |
| 10% | 10.0% | 430,198 | 430,149 |
| Active Idle | 0 | 0 | |