SPECpower_ssj2008 Copyright (C) 2007-2019 Standard Performance Evaluation Corporation Fujitsu FUJITSU Server PRIMERGY RX2540 M5 SPECpower_ssj2008 = 13,502 overall ssj_ops/watt Test Sponsor: Fujitsu SPEC License #: 19 Tested By: Fujitsu Test Location: Kawasaki, Kanagawa, Japan Test Date: Apr 18, 2019 Publication: Jun 5, 2019 Hardware Availability: Jun-2019 Software Availability: Dec-2018 Test Method: Single Node System Source: Single Supplier System Designation: Server Power Provisioning: Line-powered Benchmark Results Summary Performance | Power | Performance | | to Power | | Ratio Target Load | Actual Load | ssj_ops | Average | | | | Active Power | | | | (W) | ------------- | ------------- | ------------- | ------------- | ------------- 100% | 99.7% | 5,514,468 | 388 | 14,201 90% | 90.1% | 4,979,547 | 322 | 15,442 80% | 80.0% | 4,421,965 | 276 | 16,034 70% | 70.0% | 3,873,008 | 242 | 16,028 60% | 60.1% | 3,321,077 | 213 | 15,576 50% | 49.9% | 2,759,717 | 189 | 14,620 40% | 40.0% | 2,211,380 | 169 | 13,091 30% | 30.0% | 1,660,248 | 150 | 11,037 20% | 20.1% | 1,109,117 | 132 | 8,407 10% | 10.0% | 555,330 | 112 | 4,955 Active Idle | 0 | 58.3 | 0 sum of ssj_ops / sum of power = | 13,502 System Under Test Set: 'RX2540M5' Set Identifier: RX2540M5 Set Description: System Under Test # of Identical Nodes: 1 Comment: Single Node HARDWARE Hardware Vendor: Fujitsu Model: FUJITSU Server PRIMERGY RX2540 M5 Form Factor: 2U CPU Name: Intel Xeon Platinum 8280L CPU Characteristics: 28-Core, 2.70GHz, 38.5MB L3 Cache CPU Frequency (MHz): 2700 CPU(s) Enabled: 56 cores, 2 chips, 28 cores/chip Hardware Threads: 112 (2 / core) CPU(s) Orderable: 1,2 chips Primary Cache: 32 KB I + 32 KB D on chip per core Secondary Cache: 1 MB I+D on chip per core Tertiary Cache: 39424 KB I+D on chip per chip Other Cache: None Memory Amount (GB): 192 # and size of DIMM: 12 x 16384 MB Memory Details: 12 x 16 GB 2Rx8 PC4-2933Y-R; slots 1A, 1B, 1C, 1D, 1E, 1F, 1G, 1H, 1J, 1K, 1L, 1M populated Power Supply Quantity and Rating 1 x 800 (W): Power Supply Details: Fujitsu Technology Solutions S26113-F615-E10 Disk Drive: 1 x SSD M.2 240GB, S26361-F5706-E240 Disk Controller: Integrated SATA Controller # and type of Network Interface 2 x Intel(R) I350 Gigabit Network Connection Cards (NICs) Installed: (onboard) NICs Enabled in Firmware / OS / 1/1/1 Connected: Network Speed (Mbit): 1000 Keyboard: None Mouse: None Monitor: None Optical Drives: No Other Hardware: None SOFTWARE Power Management: Enabled (see SUT Notes) Operating System (OS): SUSE Linux Enterprise Server 12 SP4 OS Version: 4.12.14-94.41-default Filesystem: xfs JVM Vendor: Oracle Corporation JVM Version: Oracle Java HotSpot(TM) 64-Bit Server VM (build 24.80-b11, mixed mode), version 1.7.0_80 JVM Command-line Options: -server -Xmn1700m -Xms1950m -Xmx1950m -XX:SurvivorRatio=1 -XX:TargetSurvivorRatio=99 -XX:AllocatePrefetchDistance=256 -XX:AllocatePrefetchLines=4 -XX:LoopUnrollLimit=45 -XX:InitialTenuringThreshold=12 -XX:MaxTenuringThreshold=15 -XX:ParallelGCThreads=8 -XX:InlineSmallCode=3900 -XX:MaxInlineSize=270 -XX:FreqInlineSize=2500 -XX:+AggressiveOpts -XX:+UseLargePages -XX:+UseParallelOldGC -XX:+UseHugeTLBFS -XX:+UseTransparentHugePages -XX:UseAVX=0 JVM Affinity: chrt -r 1 taskset -c [(0,56),(1,57),(2,58),(3,59),(7,63),(8,64),( 9,65),(14,70),(15,71),(16,72),(17,73),(21,77 ),(22,78),(23,79),(4,60),(5,61),(6,62),(10,6 6),(11,67),(12,68),(13,69),(18,74),(19,75),( 20,76),(24,80),(25,81),(26,82),(27,83),(28,8 4),(29,85),(30,86),(31,87),(35,91),(36,92),( 37,93),(42,98),(43,99),(44,100),(45,101),(49 ,105),(50,106),(51,107),(32,88),(33,89),(34, 90),(38,94),(39,95),(40,96),(41,97),(46,102) ,(47,103),(48,104),(52,108),(53,109),(54,110 ),(55,111)] numactl --membind=[0-3] JVM Instances: 56 JVM Initial Heap (MB): 1950 JVM Maximum Heap (MB): 1950 JVM Address Bits: 64 Boot Firmware Version: R1.8.0 Management Firmware Version: 2.00c Workload Version: SSJ 1.2.10 Director Location: Controller Other Software: None Boot Firmware Settings * Set "SATA Controller = Disabled" in BIOS. * Set "Serial Port = Disabled" in BIOS. * Set "Hardware Prefetcher = Disabled" in BIOS. * Set "Adjacent Cache Line Prefetch = Disabled" in BIOS. * Set "DCU Streamer Prefetcher = Disabled" in BIOS. * Set "Intel Virtualization Technology = Disabled" in BIOS. * Set "Turbo Mode = Disabled" in BIOS. * Set "Override OS Energy Performance = Enabled" in BIOS. * Set "Energy Performance = Energy Efficient" in BIOS. * Set "DDR Performance = Power balanced" in BIOS.(effective memory frequency = 2400 MHz) * Set "Autonomous C-state Support = Enabled" in BIOS. * Set "ASPM Support = Auto" in BIOS. * Set "UPI Link Frequency Select = 9.6GT/s" in BIOS. * Set "Uncore Frequency Override = Power balanced" in BIOS. * Set "IMC Interleaving = 1-way" in BIOS. * Set "Package C State limit = C6(Retention)" in BIOS. * Set "HWPM = Natice Mode" in BIOS. * Set "USB Port Control = Enable internal ports only" in BIOS. * Set "Network Stack = Disabled" in BIOS. * Set "LAN Controller = LAN1" in BIOS. Management Firmware Settings None System Under Test Notes * kernal parameter:pcie_aspm=force pcie_aspm.policy=powersave intel_pstate=disable rcu_nocbs=1-111 nohz_full=1-111 isolcpus=1-111 * Benchmark started via ssh * modprobe cpufreq_conservative * cpupower frequency-set --governor conservative * echo -n 98 > /sys/devices/system/cpu/cpufreq/conservative/up_threshold * echo -n 1 > /sys/devices/system/cpu/cpufreq/conservative/freq_step * echo -n 1000000 > /sys/devices/system/cpu/cpufreq/conservative/sampling_rate * echo -n 0 >/sys/devices/system/cpu/cpufreq/conservative/ignore_nice_load * sysctl -w kernel.sched_migration_cost_ns=6000 * echo -n 97 > /sys/devices/system/cpu/cpufreq/conservative/down_threshold * echo -n 1 > /sys/devices/system/cpu/cpufreq/conservative/sampling_down_factor * sysctl -w kernel.sched_min_granularity_ns=10000000 * echo always > /sys/kernel/mm/transparent_hugepage/enabled * powertop --auto-tune * echo 0 > /proc/sys/kernel/nmi_watchdog * cpupower frequency-set -u 2500MHz * sysctl -w vm.swappiness=50 * sysctl -w vm.laptop_mode=5 * <Yes>: The test sponsor attests, as of date of publication, that CVE-2017-5754 (Meltdown) is mitigated in the system as tested and documented. * <Yes>: The test sponsor attests, as of date of publication, that CVE-2017-5753 (Spectre variant 1) is mitigated in the system as tested and documented. * <Yes>: The test sponsor attests, as of date of publication, that CVE-2017-5715 (Spectre variant 2) is mitigated in the system as tested and documented. Controller System HARDWARE Hardware Vendor: Fujitsu Model: PRIMERGY RX2530 M2 CPU Description: 2x Intel Xeon E5-2643 v4 Memory amount (GB): 64 SOFTWARE Operating System (OS): Microsoft Windows Server 2012 R2 Standard JVM Vendor: Oracle Corporation JVM Version: Oracle Java HotSpot(TM) 64-Bit Server VM (build 24.80-b11, mixed mode), version 1.7.0_80 CCS Version: 1.2.6 Measurement Devices POWER ANALYZER PWR1 Hardware Vendor: Hioki Model: Hioki3336 Serial Number: 170130930 Connectivity: RS-232 Input Connection: Default Metrology Institute: NICT (National Institute of Information and Communications Technology) Accredited by: HIOKI E.E. CORPORATION Calibration Label: H06400086-1901 Date of Calibration: 30-Jan-2019 PTDaemon Host System: same as CCS PTDaemon Host OS: same as CCS PTDaemon Version: 1.8.1-260d064e-20161220 Setup Description: Connected to PSU 1 TEMPERATURE SENSOR TEMP1 Hardware Vendor: Digi International Inc. Model: Watchport/H Driver Version: Watchport Virtual Port 5.70.105.0 Connectivity: USB PTDaemon Host System: same as CCS PTDaemon Host OS: same as CCS Setup Description: 5 mm in front of SUT main air intake Notes * SPECpower_ssj.props input.load_level.number_warehouses set to 112 due to a known inconsistency in processor reporting with this Java version. Aggregate Electrical and Environmental Data Target Load | Average | Minimum | Active | Ambient | Power (W) | Temperature | | (Degrees C) ----------- | ---------- | ------------- 100% | 388 | 22.1 90% | 322 | 22.1 80% | 276 | 22.2 70% | 242 | 22.2 60% | 213 | 22.2 50% | 189 | 22.1 40% | 169 | 22.1 30% | 150 | 22.1 20% | 132 | 21.9 10% | 112 | 21.9 Active Idle | 58.3 | 21.9 Line Standard | Minimum | Elevation (m) | Temperature | | (Degrees C) | ------------------------- | --------------- | --------------- 200V / 50 Hz / 1 phase / | 21.9 | 11 2 wires | | See the Power/Temperature Details Report (power_ssj2008-20190423-00958-power.txt) for additional details. Aggregate Performance Data Target Load | Actual Load | ssj_ops | | Target | Actual ----------------- | ----------------- | ----------------- | ----------------- Calibration 1 | | | 5,213,775 Calibration 2 | | | 5,525,036 Calibration 3 | | | 5,533,758 ssj_ops@calibrated=5,529,397 100% | 99.7% | 5,529,397 | 5,514,468 90% | 90.1% | 4,976,457 | 4,979,547 80% | 80.0% | 4,423,518 | 4,421,965 70% | 70.0% | 3,870,578 | 3,873,008 60% | 60.1% | 3,317,638 | 3,321,077 50% | 49.9% | 2,764,698 | 2,759,717 40% | 40.0% | 2,211,759 | 2,211,380 30% | 30.0% | 1,658,819 | 1,660,248 20% | 20.1% | 1,105,879 | 1,109,117 10% | 10.0% | 552,940 | 555,330 Active Idle | | 0 | 0 See the Host Performance Report (power_ssj2008-20190423-00958.linux-yrty.txt) for additional details. Copyright (C) 2007-2019 Standard Performance Evaluation Corporation http://www.spec.org - info@spec.org SPECpower_ssj2008 Reporter Version: [SSJ 1.2.10, May 9, 2012]