| Dell Inc. PowerEdge R240 (Intel Xeon E-2176G, 3.70 GHz) | SPECpower_ssj2008 = 8,913 overall ssj_ops/watt | ||||
| Test Sponsor: | Dell Inc. | SPEC License #: | 55 | Test Method: | Single Node |
| Tested By: | Dell Inc. | Test Location: | Round Rock, TX, USA | Test Date: | Jun 30, 2019 |
| Hardware Availability: | Apr-2019 | Software Availability: | Apr-2015 | Publication: | Jul 17, 2019 |
| System Source: | Single Supplier | System Designation: | Server | Power Provisioning: | Line-powered |
| Performance | Power | Performance to Power Ratio | ||
|---|---|---|---|---|
| Target Load | Actual Load | ssj_ops | Average Active Power (W) | |
| 100% | 99.9% | 856,931 | 93.1 | 9,208 |
| 90% | 89.6% | 769,188 | 81.0 | 9,499 |
| 80% | 80.1% | 687,411 | 67.2 | 10,228 |
| 70% | 70.1% | 601,199 | 55.9 | 10,762 |
| 60% | 59.7% | 512,622 | 47.5 | 10,800 |
| 50% | 49.9% | 428,614 | 41.7 | 10,289 |
| 40% | 39.9% | 342,541 | 36.6 | 9,358 |
| 30% | 29.9% | 256,976 | 32.3 | 7,965 |
| 20% | 20.0% | 171,765 | 28.5 | 6,021 |
| 10% | 10.0% | 85,416 | 25.1 | 3,408 |
| Active Idle | 0 | 20.0 | 0 | |
| ∑ssj_ops / ∑power = | 8,913 | |||
| Set Identifier: | sut |
| Set Description: | System Under Test |
| # of Identical Nodes: | 1 |
| Comment: | PowerEdge R240 |
| Hardware | |
|---|---|
| Hardware Vendor: | Dell Inc. |
| Model: | PowerEdge R240 (Intel Xeon E-2176G, 3.70 GHz) |
| Form Factor: | 1U |
| CPU Name: | Intel Xeon E-2176G |
| CPU Characteristics: | 6 core, 3.70 GHz, 12 MB L3 Cache |
| CPU Frequency (MHz): | 3700 |
| CPU(s) Enabled: | 6 cores, 1 chip, 6 cores/chip |
| Hardware Threads: | 12 (2 / core) |
| CPU(s) Orderable: | 1 chips |
| Primary Cache: | 32 KB I + 32 KB D on chip per core |
| Secondary Cache: | 256 KB I+D on chip per core |
| Tertiary Cache: | 12 MB I+D on chip per chip |
| Other Cache: | None |
| Memory Amount (GB): | 32 |
| # and size of DIMM: | 2 x 16 GB |
| Memory Details: | 16GB 2Rx8 PC4-2933Y-R running at 2666. Slots A1-2 populated. |
| Power Supply Quantity and Rating (W): | 1 x 250 |
| Power Supply Details: | Integrated 250W Bronze Efficiency |
| Disk Drive: | 1 x 240 GB SATA SSD |
| Disk Controller: | Native Chipset SATA |
| # and type of Network Interface Cards (NICs) Installed: | 1 x quad-port Broadcom 5720 |
| NICs Enabled in Firmware / OS / Connected: | 4/4/1 |
| Network Speed (Mbit): | 1000 |
| Keyboard: | None |
| Mouse: | None |
| Monitor: | None |
| Optical Drives: | No |
| Other Hardware: | None |
| Software | |
|---|---|
| Power Management: | Balanced power plan in OS |
| Operating System (OS): | Microsoft Windows Server 2012 R2 Datacenter |
| OS Version: | Version 6.3.9600.18969 |
| Filesystem: | NTFS |
| JVM Vendor: | Oracle Corporation |
| JVM Version: | Java HotSpot 64-Bit Server VM (build 24.80-b11, mixed mode), version 1.7.0_80-b15 |
| JVM Command-line Options: | -server -Xmx1850m -Xms1850m -Xmn1600m -XX:SurvivorRatio=1 -XX:TargetSurvivorRatio=99 -XX:ParallelGCThreads=6 -XX:AllocatePrefetchDistance=256 -XX:AllocatePrefetchLines=4 -XX:LoopUnrollLimit=45 -XX:InitialTenuringThreshold=12 -XX:MaxTenuringThreshold=15 -XX:InlineSmallCode=3900 -XX:MaxInlineSize=270 -XX:FreqInlineSize=2500 -XX:+UseLargePages -XX:+UseParallelOldGC -XX:+AggressiveOpts |
| JVM Affinity: | start /NODE [0] /AFFINITY [0x3F,0xFC0] |
| JVM Instances: | 2 |
| JVM Initial Heap (MB): | 1850 |
| JVM Maximum Heap (MB): | 1850 |
| JVM Address Bits: | 64 |
| Boot Firmware Version: | 1.1.5 |
| Management Firmware Version: | 3.34.34.34 A00 |
| Workload Version: | SSJ 1.2.10 |
| Director Location: | Controller |
| Other Software: | Microsoft Windows Server 2012 R2 monthly security rollups KB4489881, KB4489883 applied to the test system in Apr-2019 prior to results generation. |
| Hardware | |
|---|---|
| Hardware Vendor: | Dell Inc |
| Model: | PowerEdge R410 |
| CPU Description: | Intel Xeon E5620, 2.40 GHz |
| Memory amount (GB): | 32.0 |
| Software | |
|---|---|
| Operating System (OS): | Microsoft Windows Server 2008 R2 Enterprise Edition Service Pack 1 |
| JVM Vendor: | Oracle Corporation |
| JVM Version: | Hotspot(TM) Client VM, version 1.8.0_121 |
| CCS Version: | 1.2.6 |
| Power Analyzer pwr1 | |
|---|---|
| Hardware Vendor: | Yokogawa Meters and Instruments Corporation |
| Model: | WT210 |
| Serial Number: | 91N819622 |
| Connectivity: | RS-232 |
| Input Connection: | Default |
| Metrology Institute: | NIST |
| Accredited by: | TesCom |
| Calibration Label: | 98378 |
| Date of Calibration: | 21-Mar-2019 |
| PTDaemon Host System: | same as CCS |
| PTDaemon Host OS: | same as CCS |
| PTDaemon Version: | 1.8.1-260d064e-20161220 |
| Setup Description: | Connected to power supply |
| Temperature Sensor temp1 | |
|---|---|
| Hardware Vendor: | Digi International Inc. |
| Model: | Watchport/H |
| Driver Version: | 5.10.26.0 |
| Connectivity: | USB |
| PTDaemon Host System: | same as CCS |
| PTDaemon Host OS: | same as CCS |
| Setup Description: | 25 mm in front of SUT main airflow intake |
| Target Load | Average Active Power (W) | Minimum Ambient Temperature (°C) |
|---|---|---|
| 100% | 93.1 | 20.4 |
| 90% | 81.0 | 20.4 |
| 80% | 67.2 | 20.4 |
| 70% | 55.9 | 20.4 |
| 60% | 47.5 | 20.4 |
| 50% | 41.7 | 20.4 |
| 40% | 36.6 | 20.4 |
| 30% | 32.3 | 20.4 |
| 20% | 28.5 | 20.4 |
| 10% | 25.1 | 20.3 |
| Active Idle | 20.0 | 20.3 |
| Line Standard | Minimum Temperature (°C) | Elevation (m) |
|---|---|---|
| 208V / 60 Hz / 1 phase / 2 wires | 20.3 | 255 |
| Target Load | Actual Load | ssj_ops | |
|---|---|---|---|
| Target | Actual | ||
| Calibration 1 | 855,240 | ||
| Calibration 2 | 858,352 | ||
| Calibration 3 | 857,855 | ||
| ssj_ops@calibrated=858,104 | |||
| 100% | 99.9% | 858,104 | 856,931 |
| 90% | 89.6% | 772,293 | 769,188 |
| 80% | 80.1% | 686,483 | 687,411 |
| 70% | 70.1% | 600,672 | 601,199 |
| 60% | 59.7% | 514,862 | 512,622 |
| 50% | 49.9% | 429,052 | 428,614 |
| 40% | 39.9% | 343,241 | 342,541 |
| 30% | 29.9% | 257,431 | 256,976 |
| 20% | 20.0% | 171,621 | 171,765 |
| 10% | 10.0% | 85,810 | 85,416 |
| Active Idle | 0 | 0 | |