| Fujitsu FUJITSU Server PRIMERGY TX1330 M4 | SPECpower_ssj2008 = 12,631 overall ssj_ops/watt | ||||
| Test Sponsor: | Fujitsu | SPEC License #: | 19 | Test Method: | Single Node |
| Tested By: | Fujitsu | Test Location: | Kawasaki, Kanagawa, Japan | Test Date: | Oct 7, 2019 |
| Hardware Availability: | Oct-2019 | Software Availability: | Dec-2018 | Publication: | Nov 6, 2019 |
| System Source: | Single Supplier | System Designation: | Server | Power Provisioning: | Line-powered |
| Performance | Power | Performance to Power Ratio | ||
|---|---|---|---|---|
| Target Load | Actual Load | ssj_ops | Average Active Power (W) | |
| 100% | 99.2% | 776,812 | 53.2 | 14,594 |
| 90% | 90.1% | 705,646 | 46.6 | 15,148 |
| 80% | 80.2% | 628,060 | 41.3 | 15,214 |
| 70% | 71.1% | 556,871 | 37.1 | 15,023 |
| 60% | 59.9% | 469,204 | 32.2 | 14,552 |
| 50% | 49.7% | 389,284 | 28.5 | 13,666 |
| 40% | 40.0% | 312,897 | 25.1 | 12,479 |
| 30% | 30.0% | 235,087 | 22.4 | 10,498 |
| 20% | 20.1% | 157,397 | 20.3 | 7,771 |
| 10% | 9.9% | 77,883 | 18.6 | 4,182 |
| Active Idle | 0 | 15.9 | 0 | |
| ∑ssj_ops / ∑power = | 12,631 | |||
| Set Identifier: | TX1330M4 |
| Set Description: | System Under Test |
| # of Identical Nodes: | 1 |
| Comment: | Single Node |
| Hardware | |
|---|---|
| Hardware Vendor: | Fujitsu |
| Model: | FUJITSU Server PRIMERGY TX1330 M4 |
| Form Factor: | Tower |
| CPU Name: | Intel Xeon E-2288G |
| CPU Characteristics: | 8-Core, 3.7GHz, 16MB L3 Cache |
| CPU Frequency (MHz): | 3700 |
| CPU(s) Enabled: | 8 cores, 1 chip, 8 cores/chip |
| Hardware Threads: | 16 (2 / core) |
| CPU(s) Orderable: | 1 chip |
| Primary Cache: | 32 KB I + 32 KB D on chip per core |
| Secondary Cache: | 256 KB I+D on chip per core |
| Tertiary Cache: | 16 MB I+D on chip per chip |
| Other Cache: | None |
| Memory Amount (GB): | 16 |
| # and size of DIMM: | 2 x 8192 MB |
| Memory Details: | 2 x 8 GB 1Rx8 PC4-2666V-E; slots 1A, 1B, populated |
| Power Supply Quantity and Rating (W): | 1 x 300 |
| Power Supply Details: | Standard power supply part of base unit S26361-K1639-V101 |
| Disk Drive: | 1 x M.2 SSD 240GB, S26361-F5706-E240 |
| Disk Controller: | Integrated SATA Controller |
| # and type of Network Interface Cards (NICs) Installed: | 2 x Intel I210 Gigabit Network Connection (onboard) |
| NICs Enabled in Firmware / OS / Connected: | 1/1/1 |
| Network Speed (Mbit): | 1000 |
| Keyboard: | None |
| Mouse: | None |
| Monitor: | None |
| Optical Drives: | No |
| Other Hardware: | None |
| Software | |
|---|---|
| Power Management: | Enabled (see SUT Notes) |
| Operating System (OS): | SUSE Linux Enterprise Server 12 SP4 |
| OS Version: | 4.12.14-94.41-default |
| Filesystem: | xfs |
| JVM Vendor: | Oracle Corporation |
| JVM Version: | Oracle Java HotSpot(TM) 64-Bit Server VM (build 24.80-b11, mixed mode), version 1.7.0_80 |
| JVM Command-line Options: | -server -Xmn10500m -Xms12000m -Xmx12000m -XX:SurvivorRatio=1 -XX:TargetSurvivorRatio=99 -XX:AllocatePrefetchDistance=256 -XX:AllocatePrefetchLines=4 -XX:LoopUnrollLimit=45 -XX:InitialTenuringThreshold=12 -XX:MaxTenuringThreshold=15 -XX:ParallelGCThreads=8 -XX:InlineSmallCode=3900 -XX:MaxInlineSize=270 -XX:FreqInlineSize=2500 -XX:+AggressiveOpts -XX:+UseLargePages -XX:+UseParallelOldGC -XX:+UseHugeTLBFS -XX:+UseTransparentHugePages -XX:UseAVX=0 |
| JVM Affinity: | chrt -r 1 numactl --localalloc |
| JVM Instances: | 1 |
| JVM Initial Heap (MB): | 12000 |
| JVM Maximum Heap (MB): | 12000 |
| JVM Address Bits: | 64 |
| Boot Firmware Version: | R1.12.0 |
| Management Firmware Version: | 2.50P |
| Workload Version: | SSJ 1.2.10 |
| Director Location: | Controller |
| Other Software: | None |
| Hardware | |
|---|---|
| Hardware Vendor: | Fujitsu |
| Model: | PRIMERGY RX2530 M2 |
| CPU Description: | 2x Intel Xeon E5-2643 v4 |
| Memory amount (GB): | 64 |
| Software | |
|---|---|
| Operating System (OS): | Microsoft Windows Server 2012 R2 Standard |
| JVM Vendor: | Oracle Corporation |
| JVM Version: | Oracle Java HotSpot(TM) 64-Bit Server VM (build 24.80-b11, mixed mode), version 1.7.0_80 |
| CCS Version: | 1.2.6 |
| Power Analyzer pwr1 | |
|---|---|
| Hardware Vendor: | Hioki |
| Model: | Hioki3336 |
| Serial Number: | 170130930 |
| Connectivity: | RS-232 |
| Input Connection: | Default |
| Metrology Institute: | NICT (National Institute of Information and Communications Technology) |
| Accredited by: | HIOKI E.E. CORPORATION |
| Calibration Label: | H06400086-1901 |
| Date of Calibration: | 30-Jan-2019 |
| PTDaemon Host System: | same as CCS |
| PTDaemon Host OS: | same as CCS |
| PTDaemon Version: | 1.9.1-a2d19f26-20190717 |
| Setup Description: | Connected to PSU 1 |
| Temperature Sensor temp1 | |
|---|---|
| Hardware Vendor: | Digi International Inc. |
| Model: | Watchport/H |
| Driver Version: | Watchport Virtual Port 5.70.105.0 |
| Connectivity: | USB |
| PTDaemon Host System: | same as CCS |
| PTDaemon Host OS: | same as CCS |
| Setup Description: | 5 mm in front of SUT main air intake |
| Target Load | Average Active Power (W) | Minimum Ambient Temperature (°C) |
|---|---|---|
| 100% | 53.2 | 21.9 |
| 90% | 46.6 | 21.9 |
| 80% | 41.3 | 22.0 |
| 70% | 37.1 | 22.0 |
| 60% | 32.2 | 22.1 |
| 50% | 28.5 | 22.2 |
| 40% | 25.1 | 22.2 |
| 30% | 22.4 | 22.2 |
| 20% | 20.3 | 22.2 |
| 10% | 18.6 | 22.2 |
| Active Idle | 15.9 | 22.2 |
| Line Standard | Minimum Temperature (°C) | Elevation (m) |
|---|---|---|
| 200V / 50 Hz / 1 phase / 2 wires | 21.9 | 11 |
| Target Load | Actual Load | ssj_ops | |
|---|---|---|---|
| Target | Actual | ||
| Calibration 1 | 680,830 | ||
| Calibration 2 | 783,634 | ||
| Calibration 3 | 782,082 | ||
| ssj_ops@calibrated=782,858 | |||
| 100% | 99.2% | 782,858 | 776,812 |
| 90% | 90.1% | 704,572 | 705,646 |
| 80% | 80.2% | 626,287 | 628,060 |
| 70% | 71.1% | 548,001 | 556,871 |
| 60% | 59.9% | 469,715 | 469,204 |
| 50% | 49.7% | 391,429 | 389,284 |
| 40% | 40.0% | 313,143 | 312,897 |
| 30% | 30.0% | 234,857 | 235,087 |
| 20% | 20.1% | 156,572 | 157,397 |
| 10% | 9.9% | 78,286 | 77,883 |
| Active Idle | 0 | 0 | |