SPECpower_ssj2008 Copyright (C) 2007-2021 Standard Performance Evaluation Corporation Hewlett Packard Enterprise ProLiant DL365 Gen10 Plus SPECpower_ssj2008 = 18,268 overall ssj_ops/watt Test Sponsor: Hewlett Packard Enterprise SPEC License #: 3 Tested By: Hewlett Packard Enterprise Test Location: Houston, TX, USA Test Date: Feb 18, 2021 Publication: Mar 15, 2021 Hardware Availability: Mar-2021 Software Availability: Jul-2020 Test Method: Single Node System Source: Single Supplier System Designation: Server Power Provisioning: Line-powered Benchmark Results Summary Performance | Power | Performance | | to Power | | Ratio Target Load | Actual Load | ssj_ops | Average | | | | Active Power | | | | (W) | ------------- | ------------- | ------------- | ------------- | ------------- 100% | 99.5% | 11,174,699 | 468 | 23,857 90% | 89.9% | 10,099,393 | 443 | 22,821 80% | 80.0% | 8,986,537 | 417 | 21,542 70% | 70.0% | 7,868,166 | 388 | 20,283 60% | 60.0% | 6,737,276 | 348 | 19,381 50% | 50.0% | 5,616,169 | 298 | 18,868 40% | 40.0% | 4,491,004 | 267 | 16,848 30% | 30.0% | 3,375,237 | 242 | 13,958 20% | 20.0% | 2,251,910 | 215 | 10,480 10% | 10.0% | 1,121,751 | 185 | 6,073 Active Idle | 0 | 109 | 0 sum of ssj_ops / sum of power = | 18,268 System Under Test Set: 'SUT' Set Identifier: SUT Set Description: System Under Test # of Identical Nodes: 1 Comment: SUT HARDWARE Hardware Vendor: Hewlett Packard Enterprise Model: ProLiant DL365 Gen10 Plus Form Factor: 1U CPU Name: AMD EPYC 7713 2.00 GHz CPU Characteristics: 64-Core, 2.0GHz 256MB L3 Cache CPU Frequency (MHz): 2000 CPU(s) Enabled: 128 cores, 2 chips, 64 cores/chip Hardware Threads: 256 (2 / core) CPU(s) Orderable: 1,2 chips Primary Cache: 32 KB I + 32 KB D on chip per core Secondary Cache: 512 KB I+D on chip per core Tertiary Cache: 256 MB I+D on chip per core Other Cache: None Memory Amount (GB): 256 # and size of DIMM: 16 x 16384 MB Memory Details: 16 GB 2Rx8 PC4-3200AA-R; slots 1, 3, 5, 7, 10, 12, 14 and 16 populated Power Supply Quantity and Rating 1 x 800 (W): Power Supply Details: HPE 800W Flex Slot Titanium Hot Plug Low Halogen Power Supply Kit (865438-B21) Disk Drive: 1 x HPE 480GB SATA 6G SSD (P05976-B21) Disk Controller: 1 x HPE Smart Array S100i SR Gen10 # and type of Network Interface 1 x Intel Ethernet I350T 4-Port 1Gb NIC Cards (NICs) Installed: NICs Enabled in Firmware / OS / 4/4/1 Connected: Network Speed (Mbit): 1000 Keyboard: None Mouse: None Monitor: None Optical Drives: No Other Hardware: None SOFTWARE Power Management: Enabled (see SUT Notes) Operating System (OS): SUSE Linux Enterprise Server 12 SP5 OS Version: 4.12.14-122.17-default Filesystem: xfs JVM Vendor: Oracle Corporation JVM Version: Oracle Java HotSpot(TM) 64-Bit Server VM 18.9 (build 11.0.8+10-LTS, mixed mode) JVM Command-line Options: -server -Xmn1450m -Xms1700m -Xmx1700m -XX:SurvivorRatio=1 -XX:TargetSurvivorRatio=99 -XX:ParallelGCThreads=2 -XX:AllocatePrefetchDistance=256 -XX:AllocatePrefetchLines=2 -XX:LoopUnrollLimit=45 -XX:InitialTenuringThreshold=12 -XX:MaxTenuringThreshold=15 -XX:InlineSmallCode=3900 -XX:MaxInlineSize=270 -XX:FreqInlineSize=2500 -XX:+UseLargePages -XX:+UseParallelOldGC -XX:LargePageSizeInBytes=2m -XX:+UseBiasedLocking -XX:+UseHugeTLBFS -XX:+UseTransparentHugePages JVM Affinity: for each physicalCore { numactl -C physicalCoreId, physicalCoreId + 128 } JVM Instances: 128 JVM Initial Heap (MB): 1700 JVM Maximum Heap (MB): 1700 JVM Address Bits: 64 Boot Firmware Version: A42 v2.40 (02/15/2021) Management Firmware Version: 2.40 Feb 07 2021 Workload Version: SSJ 1.2.10 Director Location: Controller Other Software: None Boot Firmware Settings BIOS Platform Configuration (RBSU): * BIOS Serial Console Port: Disabled * USB Support: All USB Ports Disabled * Determinism Control: Manual * Performance Determinism : Power Determinism * Memory Interleaving Mode: Disabled * Maximum Memory Bus Frequency: 2400 MHz * DRAM Controller Power Down: Enabled * NUMA memory domains per socket: Four memory domains per socket * Last-Level Cache (LLC) As NUMA Node: Enabled * Data Fabric C-State Enable: Force Enabled * C-State Efficiency Mode: Enabled * AMD Core Performance Boost: Disabled * AMD Fmax Boost Limit Control: Manual * AMD Fmax Boost Limit: 2000 * L1 Stream HW Prefetcher: Disabled * L2 Stream HW Prefetcher: Disabled * Maximum PCI Express Speed: PCIe Generation 1.0 Management Firmware Settings See SUT Notes System Under Test Notes * Benchmark started via ssh * SPECpower_ssj.props input.load_level.number_warehouses set to 256 due to a known inconsistency in processor reporting with this Java version * OS tunes: * echo -n 98 > /sys/devices/system/cpu/cpufreq/ondemand/up_threshold * echo -n 1000000 > /sys/devices/system/cpu/cpufreq/ondemand/sampling_rate * echo 6000 > /proc/sys/kernel/sched_migration_cost_ns * echo 10000000 > /proc/sys/kernel/sched_min_granularity_ns * echo 0 > /proc/sys/kernel/nmi_watchdog * Applied protection against speculative execution * N/A: The test sponsor attests, as of date of publication, that CVE-2017-5754 (Meltdown) is mitigated in the system as tested and documented. * Yes: The test sponsor attests, as of date of publication, that CVE-2017-5753 (Spectre variant 1) is mitigated in the system as tested and documented. * Yes: The test sponsor attests, as of date of publication, that CVE-2017-5715 (Spectre variant 2) is mitigated in the system as tested and documented. Controller System HARDWARE Hardware Vendor: Hewlett Packard Enterprise Model: ProLiant DL360 Gen9 CPU Description: 2 x Intel Xeon E5-2660 v3 Memory amount (GB): 128 SOFTWARE Operating System (OS): Windows Server 2012 R2 JVM Vendor: Oracle Corporation JVM Version: 1.8.0_161-b12 (build 25.161-b12, mixed mode) CCS Version: 1.2.6 Measurement Devices POWER ANALYZER PWR1 Hardware Vendor: Yokogawa Model: WT210 Serial Number: 91K308556 Connectivity: GPIB vi NI GPIB-USB-HS Input Connection: Default Metrology Institute: NIST Accredited by: Transcat Calibration Label: 5-FQ7PK-200-1 Date of Calibration: 17-Jun-2020 PTDaemon Host System: same as CCS PTDaemon Host OS: same as CCS PTDaemon Version: 1.9.2-3976349f-20201208 Setup Description: SUT Power Supplies TEMPERATURE SENSOR TEMP1 Hardware Vendor: Digi International Inc. Model: Watchport/H Driver Version: 5.70.105.0 Connectivity: USB PTDaemon Host System: same as CCS PTDaemon Host OS: same as CCS Setup Description: 5 mm in front of SUT main intake Notes None Aggregate Electrical and Environmental Data Target Load | Average | Minimum | Active | Ambient | Power (W) | Temperature | | (Degrees C) ----------- | ---------- | ------------- 100% | 468 | 21.3 90% | 443 | 21.2 80% | 417 | 21.2 70% | 388 | 21.2 60% | 348 | 21.2 50% | 298 | 21.3 40% | 267 | 21.2 30% | 242 | 21.2 20% | 215 | 21.2 10% | 185 | 21.2 Active Idle | 109 | 21.2 Line Standard | Minimum | Elevation (m) | Temperature | | (Degrees C) | ------------------------- | --------------- | --------------- 208V / 60 Hz / 1 phase / | 21.2 | 132 2 wires | | See the Power/Temperature Details Report (power_ssj2008-20210221-01064-power.txt) for additional details. Aggregate Performance Data Target Load | Actual Load | ssj_ops | | Target | Actual ----------------- | ----------------- | ----------------- | ----------------- Calibration 1 | | | 11,280,389 Calibration 2 | | | 11,246,655 Calibration 3 | | | 11,218,266 ssj_ops@calibrated=11,232,461 100% | 99.5% | 11,232,461 | 11,174,699 90% | 89.9% | 10,109,215 | 10,099,393 80% | 80.0% | 8,985,968 | 8,986,537 70% | 70.0% | 7,862,722 | 7,868,166 60% | 60.0% | 6,739,476 | 6,737,276 50% | 50.0% | 5,616,230 | 5,616,169 40% | 40.0% | 4,492,984 | 4,491,004 30% | 30.0% | 3,369,738 | 3,375,237 20% | 20.0% | 2,246,492 | 2,251,910 10% | 10.0% | 1,123,246 | 1,121,751 Active Idle | | 0 | 0 See the Host Performance Report (power_ssj2008-20210221-01064.dl365-milan.txt) for additional details. Copyright (C) 2007-2021 Standard Performance Evaluation Corporation http://www.spec.org - info@spec.org SPECpower_ssj2008 Reporter Version: [SSJ 1.2.10, May 9, 2012]