| Fujitsu FUJITSU Server PRIMERGY TX1310 M5 (D3931-C100) | SPECpower_ssj2008 = 9,993 overall ssj_ops/watt | ||||
| Test Sponsor: | Fujitsu | SPEC License #: | 19 | Test Method: | Single Node |
| Tested By: | Fujitsu | Test Location: | Kawasaki, Kanagawa, Japan | Test Date: | Dec 18, 2021 |
| Hardware Availability: | Mar-2022 | Software Availability: | Jun-2021 | Publication: | Jan 19, 2022 |
| System Source: | Single Supplier | System Designation: | Server | Power Provisioning: | Line-powered |
| Performance | Power | Performance to Power Ratio | ||
|---|---|---|---|---|
| Target Load | Actual Load | ssj_ops | Average Active Power (W) | |
| 100% | 99.9% | 659,394 | 58.9 | 11,204 |
| 90% | 90.2% | 595,196 | 50.7 | 11,751 |
| 80% | 80.3% | 529,513 | 43.7 | 12,124 |
| 70% | 70.3% | 463,722 | 39.0 | 11,888 |
| 60% | 59.7% | 393,761 | 34.0 | 11,584 |
| 50% | 50.3% | 332,000 | 30.2 | 11,011 |
| 40% | 40.0% | 264,032 | 26.8 | 9,861 |
| 30% | 29.8% | 196,303 | 24.0 | 8,170 |
| 20% | 19.9% | 131,513 | 21.6 | 6,090 |
| 10% | 10.0% | 65,719 | 19.0 | 3,457 |
| Active Idle | 0 | 15.6 | 0 | |
| ∑ssj_ops / ∑power = | 9,993 | |||
| Set Identifier: | TX1310M5 |
| Set Description: | System Under Test |
| # of Identical Nodes: | 1 |
| Comment: | Single Node |
| Hardware | |
|---|---|
| Hardware Vendor: | Fujitsu |
| Model: | FUJITSU Server PRIMERGY TX1310 M5 (D3931-C100) |
| Form Factor: | Tower |
| CPU Name: | Intel Xeon E-2356G (Intel Turbo Boost Technology up to 5.0GHz) |
| CPU Characteristics: | 6-Core, 3.2GHz, 12MB L3 Cache |
| CPU Frequency (MHz): | 3200 |
| CPU(s) Enabled: | 6 cores, 1 chip, 6 cores/chip |
| Hardware Threads: | 12 (2 / core) |
| CPU(s) Orderable: | 1 chips |
| Primary Cache: | 32 KB I + 48 KB D on chip per core |
| Secondary Cache: | 512 KB I+D on chip per core |
| Tertiary Cache: | 12 MB I+D on chip per chip |
| Other Cache: | None |
| Memory Amount (GB): | 16 |
| # and size of DIMM: | 2 x 8196 MB |
| Memory Details: | 2 x 8 GB 1Rx8 PC4-3200AA-ED2-11; slots 1A, 1B populated |
| Power Supply Quantity and Rating (W): | 1 x 250 |
| Power Supply Details: | S26113-E591-V70-2 |
| Disk Drive: | 1 x SSD M.2 240GB, S26361-F5787-E240 |
| Disk Controller: | Integrated SATA Controller |
| # and type of Network Interface Cards (NICs) Installed: | 2 x Intel I210 Gigabit Network Connection (onboard) |
| NICs Enabled in Firmware / OS / Connected: | 2/2/1 |
| Network Speed (Mbit): | 1000 |
| Keyboard: | None |
| Mouse: | None |
| Monitor: | None |
| Optical Drives: | No |
| Other Hardware: | None |
| Software | |
|---|---|
| Power Management: | Enabled (see SUT Notes) |
| Operating System (OS): | SUSE Linux Enterprise Server 15 SP3 |
| OS Version: | 5.3.18-57-default |
| Filesystem: | btrfs |
| JVM Vendor: | Oracle Corporation |
| JVM Version: | Oracle Java HotSpot(TM) 64-Bit Server VM 18.9 (build 11.0.9+7-LTS, mixed mode) |
| JVM Command-line Options: | -server -Xmn10500m -Xms12000m -Xmx12000m -XX:+UseHugeTLBFS -XX:+UseLargePages -XX:+UseTransparentHugePages -XX:AllocatePrefetchDistance=256 -XX:AllocatePrefetchInstr=0 -XX:AllocatePrefetchLines=4 -XX:InlineSmallCode=3900 -XX:MaxInlineSize=270 -XX:ParallelGCThreads=8 -XX:SurvivorRatio=1 -XX:TargetSurvivorRatio=99 -XX:+UseParallelOldGC -XX:FreqInlineSize=2500 -XX:MinJumpTableSize=18 -XX:UseAVX=0 -XX:+UseBiasedLocking -XX:-ThreadLocalHandshakes |
| JVM Affinity: | chrt -r 1 taskset -c 0,1,2,3,4,5,6,7,8,9,10,11 numactl --membind=0 |
| JVM Instances: | 1 |
| JVM Initial Heap (MB): | 12000 |
| JVM Maximum Heap (MB): | 12000 |
| JVM Address Bits: | 64 |
| Boot Firmware Version: | R1.30.0 |
| Management Firmware Version: | 1.01S |
| Workload Version: | SSJ 1.2.10 |
| Director Location: | Controller |
| Other Software: | None |
| Hardware | |
|---|---|
| Hardware Vendor: | Fujitsu |
| Model: | PRIMERGY RX2530 M2 |
| CPU Description: | Intel Xeon E5-2643 v4 |
| Memory amount (GB): | 64 |
| Software | |
|---|---|
| Operating System (OS): | Microsoft Windows Server 2012 R2 Standard |
| JVM Vendor: | Oracle Corporation |
| JVM Version: | Oracle Java HotSpot(TM) 64-Bit Server VM (build 25.211-b12, mixed mode), version 1.8.0_211 |
| CCS Version: | 1.2.6 |
| Power Analyzer pwr1 | |
|---|---|
| Hardware Vendor: | Hioki |
| Model: | PW3336 |
| Serial Number: | 170134584 |
| Connectivity: | RS-232 |
| Input Connection: | Default |
| Metrology Institute: | NICT (National Institute of Information and Communications Technology) |
| Accredited by: | HIOKI E.E. CORPORATION |
| Calibration Label: | H06400087-2103 |
| Date of Calibration: | 08-Mar-2021 |
| PTDaemon Host System: | same as CCS |
| PTDaemon Host OS: | same as CCS |
| PTDaemon Version: | 1.9.2-3976349f-20201208 |
| Setup Description: | Connected to PSU 1 |
| Temperature Sensor temp1 | |
|---|---|
| Hardware Vendor: | Digi International Inc. |
| Model: | Watchport/H |
| Driver Version: | Watchport Virtual Port 5.70.105.0 |
| Connectivity: | USB |
| PTDaemon Host System: | same as CCS |
| PTDaemon Host OS: | same as CCS |
| Setup Description: | 5 mm in front of SUT main air intake |
| Target Load | Average Active Power (W) | Minimum Ambient Temperature (°C) |
|---|---|---|
| 100% | 58.9 | 28.1 |
| 90% | 50.7 | 28.2 |
| 80% | 43.7 | 29.4 |
| 70% | 39.0 | 28.1 |
| 60% | 34.0 | 29.1 |
| 50% | 30.2 | 28.1 |
| 40% | 26.8 | 27.7 |
| 30% | 24.0 | 29.2 |
| 20% | 21.6 | 28.5 |
| 10% | 19.0 | 27.4 |
| Active Idle | 15.6 | 26.8 |
| Line Standard | Minimum Temperature (°C) | Elevation (m) |
|---|---|---|
| 200V / 50 Hz / 1 phase / 2 wires | 26.8 | 11 |
| Target Load | Actual Load | ssj_ops | |
|---|---|---|---|
| Target | Actual | ||
| Calibration 1 | 618,192 | ||
| Calibration 2 | 660,389 | ||
| Calibration 3 | 659,189 | ||
| ssj_ops@calibrated=659,789 | |||
| 100% | 99.9% | 659,789 | 659,394 |
| 90% | 90.2% | 593,810 | 595,196 |
| 80% | 80.3% | 527,831 | 529,513 |
| 70% | 70.3% | 461,852 | 463,722 |
| 60% | 59.7% | 395,873 | 393,761 |
| 50% | 50.3% | 329,895 | 332,000 |
| 40% | 40.0% | 263,916 | 264,032 |
| 30% | 29.8% | 197,937 | 196,303 |
| 20% | 19.9% | 131,958 | 131,513 |
| 10% | 10.0% | 65,979 | 65,719 |
| Active Idle | 0 | 0 | |