| Fujitsu FUJITSU Server PRIMERGY TX1330 M5 | SPECpower_ssj2008 = 10,857 overall ssj_ops/watt | ||||
| Test Sponsor: | Fujitsu | SPEC License #: | 19 | Test Method: | Single Node |
| Tested By: | Fujitsu | Test Location: | Kawasaki, Kanagawa, Japan | Test Date: | Dec 16, 2021 |
| Hardware Availability: | Mar-2022 | Software Availability: | Jun-2021 | Publication: | Jan 19, 2022 |
| System Source: | Single Supplier | System Designation: | Server | Power Provisioning: | Line-powered |
| Performance | Power | Performance to Power Ratio | ||
|---|---|---|---|---|
| Target Load | Actual Load | ssj_ops | Average Active Power (W) | |
| 100% | 99.5% | 829,272 | 73.6 | 11,272 |
| 90% | 90.0% | 749,606 | 59.1 | 12,686 |
| 80% | 79.7% | 663,603 | 49.7 | 13,356 |
| 70% | 69.9% | 582,017 | 43.8 | 13,285 |
| 60% | 59.9% | 498,986 | 39.0 | 12,787 |
| 50% | 50.0% | 416,552 | 34.7 | 12,014 |
| 40% | 40.2% | 334,849 | 30.5 | 10,984 |
| 30% | 30.1% | 251,087 | 27.2 | 9,215 |
| 20% | 20.1% | 167,056 | 24.4 | 6,836 |
| 10% | 10.1% | 83,722 | 21.6 | 3,884 |
| Active Idle | 0 | 18.0 | 0 | |
| ∑ssj_ops / ∑power = | 10,857 | |||
| Set Identifier: | TX1330M5 |
| Set Description: | System Under Test |
| # of Identical Nodes: | 1 |
| Comment: | Single Node |
| Hardware | |
|---|---|
| Hardware Vendor: | Fujitsu |
| Model: | FUJITSU Server PRIMERGY TX1330 M5 |
| Form Factor: | Tower |
| CPU Name: | Intel Xeon E-2388G (Intel Turbo Boost Technology up to 5.1GHz) |
| CPU Characteristics: | 8-Core, 3.2GHz, 16MB L3 Cache |
| CPU Frequency (MHz): | 3200 |
| CPU(s) Enabled: | 8 cores, 1 chip, 8 cores/chip |
| Hardware Threads: | 16 (2 / core) |
| CPU(s) Orderable: | 1 chips |
| Primary Cache: | 32 KB I + 48 KB D on chip per core |
| Secondary Cache: | 512 KB I+D on chip per core |
| Tertiary Cache: | 16 MB I+D on chip per chip |
| Other Cache: | None |
| Memory Amount (GB): | 16 |
| # and size of DIMM: | 2 x 8196 MB |
| Memory Details: | 2 x 8 GB 1Rx8 PC4-3200AA-ED2-11; slots 1A, 1B populated |
| Power Supply Quantity and Rating (W): | 1 x 300 |
| Power Supply Details: | S26113-E581-V50-1 |
| Disk Drive: | 1 x SSD M.2 240GB, S26361-F5787-E240 |
| Disk Controller: | Integrated SATA Controller |
| # and type of Network Interface Cards (NICs) Installed: | 2 x Intel I210 Gigabit Network Connection (onboard) |
| NICs Enabled in Firmware / OS / Connected: | 2/2/1 |
| Network Speed (Mbit): | 1000 |
| Keyboard: | None |
| Mouse: | None |
| Monitor: | None |
| Optical Drives: | No |
| Other Hardware: | None |
| Software | |
|---|---|
| Power Management: | Enabled (see SUT Notes) |
| Operating System (OS): | SUSE Linux Enterprise Server 15 SP3 |
| OS Version: | 5.3.18-57-default |
| Filesystem: | btrfs |
| JVM Vendor: | Oracle Corporation |
| JVM Version: | Oracle Java HotSpot(TM) 64-Bit Server VM 18.9 (build 11.0.9+7-LTS, mixed mode) |
| JVM Command-line Options: | -server -Xmn11500m -Xms13000m -Xmx13000m -XX:+UseHugeTLBFS -XX:+UseLargePages -XX:+UseTransparentHugePages -XX:AllocatePrefetchDistance=256 -XX:AllocatePrefetchInstr=0 -XX:AllocatePrefetchLines=4 -XX:InlineSmallCode=3900 -XX:MaxInlineSize=270 -XX:ParallelGCThreads=8 -XX:SurvivorRatio=1 -XX:TargetSurvivorRatio=99 -XX:+UseParallelOldGC -XX:FreqInlineSize=2500 -XX:MinJumpTableSize=18 -XX:UseAVX=0 -XX:+UseBiasedLocking -XX:-ThreadLocalHandshakes |
| JVM Affinity: | chrt -r 1 taskset -c 0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15 numactl --membind=0 |
| JVM Instances: | 1 |
| JVM Initial Heap (MB): | 13000 |
| JVM Maximum Heap (MB): | 13000 |
| JVM Address Bits: | 64 |
| Boot Firmware Version: | R1.30.0 |
| Management Firmware Version: | 1.01S |
| Workload Version: | SSJ 1.2.10 |
| Director Location: | Controller |
| Other Software: | None |
| Hardware | |
|---|---|
| Hardware Vendor: | Fujitsu |
| Model: | PRIMERGY RX2530 M2 |
| CPU Description: | Intel Xeon E5-2643 v4 |
| Memory amount (GB): | 64 |
| Software | |
|---|---|
| Operating System (OS): | Microsoft Windows Server 2012 R2 Standard |
| JVM Vendor: | Oracle Corporation |
| JVM Version: | Oracle Java HotSpot(TM) 64-Bit Server VM (build 25.211-b12, mixed mode), version 1.8.0_211 |
| CCS Version: | 1.2.6 |
| Power Analyzer pwr1 | |
|---|---|
| Hardware Vendor: | Hioki |
| Model: | PW3336 |
| Serial Number: | 170134584 |
| Connectivity: | RS-232 |
| Input Connection: | Default |
| Metrology Institute: | NICT (National Institute of Information and Communications Technology) |
| Accredited by: | HIOKI E.E. CORPORATION |
| Calibration Label: | H06400087-2103 |
| Date of Calibration: | 08-Mar-2021 |
| PTDaemon Host System: | same as CCS |
| PTDaemon Host OS: | same as CCS |
| PTDaemon Version: | 1.9.2-3976349f-20201208 |
| Setup Description: | Connected to PSU 1 |
| Temperature Sensor temp1 | |
|---|---|
| Hardware Vendor: | Digi International Inc. |
| Model: | Watchport/H |
| Driver Version: | Watchport Virtual Port 5.70.105.0 |
| Connectivity: | USB |
| PTDaemon Host System: | same as CCS |
| PTDaemon Host OS: | same as CCS |
| Setup Description: | 5 mm in front of SUT main air intake |
| Target Load | Average Active Power (W) | Minimum Ambient Temperature (°C) |
|---|---|---|
| 100% | 73.6 | 23.0 |
| 90% | 59.1 | 23.0 |
| 80% | 49.7 | 23.0 |
| 70% | 43.8 | 22.9 |
| 60% | 39.0 | 22.9 |
| 50% | 34.7 | 22.9 |
| 40% | 30.5 | 22.9 |
| 30% | 27.2 | 22.9 |
| 20% | 24.4 | 22.9 |
| 10% | 21.6 | 22.8 |
| Active Idle | 18.0 | 22.8 |
| Line Standard | Minimum Temperature (°C) | Elevation (m) |
|---|---|---|
| 200V / 50 Hz / 1 phase / 2 wires | 22.8 | 11 |
| Target Load | Actual Load | ssj_ops | |
|---|---|---|---|
| Target | Actual | ||
| Calibration 1 | 645,928 | ||
| Calibration 2 | 834,170 | ||
| Calibration 3 | 831,919 | ||
| ssj_ops@calibrated=833,045 | |||
| 100% | 99.5% | 833,045 | 829,272 |
| 90% | 90.0% | 749,740 | 749,606 |
| 80% | 79.7% | 666,436 | 663,603 |
| 70% | 69.9% | 583,131 | 582,017 |
| 60% | 59.9% | 499,827 | 498,986 |
| 50% | 50.0% | 416,522 | 416,552 |
| 40% | 40.2% | 333,218 | 334,849 |
| 30% | 30.1% | 249,913 | 251,087 |
| 20% | 20.1% | 166,609 | 167,056 |
| 10% | 10.1% | 83,304 | 83,722 |
| Active Idle | 0 | 0 | |