| Hewlett Packard Enterprise ProLiant DL20 Gen10 Plus | SPECpower_ssj2008 = 9,366 overall ssj_ops/watt | ||||
| Test Sponsor: | Hewlett Packard Enterprise | SPEC License #: | 3 | Test Method: | Single Node |
| Tested By: | Hewlett Packard Enterprise | Test Location: | Houston, TX, USA | Test Date: | Feb 2, 2022 |
| Hardware Availability: | Mar-2022 | Software Availability: | Aug-2021 | Publication: | Mar 24, 2022 |
| System Source: | Single Supplier | System Designation: | Server | Power Provisioning: | Line-powered |
| Performance | Power | Performance to Power Ratio | ||
|---|---|---|---|---|
| Target Load | Actual Load | ssj_ops | Average Active Power (W) | |
| 100% | 100.4% | 849,748 | 81.5 | 10,430 |
| 90% | 89.8% | 760,072 | 70.1 | 10,845 |
| 80% | 80.1% | 678,255 | 59.8 | 11,348 |
| 70% | 69.9% | 592,146 | 51.1 | 11,586 |
| 60% | 60.0% | 508,225 | 45.4 | 11,196 |
| 50% | 50.0% | 423,424 | 40.7 | 10,400 |
| 40% | 39.8% | 336,855 | 36.5 | 9,240 |
| 30% | 30.0% | 253,725 | 33.1 | 7,662 |
| 20% | 20.0% | 169,111 | 30.3 | 5,575 |
| 10% | 10.0% | 84,327 | 27.2 | 3,104 |
| Active Idle | 0 | 21.5 | 0 | |
| ∑ssj_ops / ∑power = | 9,366 | |||
| Set Identifier: | SUT |
| Set Description: | System Under Test |
| # of Identical Nodes: | 1 |
| Comment: | SUT |
| Hardware | |
|---|---|
| Hardware Vendor: | Hewlett Packard Enterprise |
| Model: | ProLiant DL20 Gen10 Plus |
| Form Factor: | 1U |
| CPU Name: | Intel(R) Xeon(R) E-2388G CPU 3.20GHz |
| CPU Characteristics: | 8-Core, 3.20 GHz, 16MB L3 Cache |
| CPU Frequency (MHz): | 3200 |
| CPU(s) Enabled: | 8 cores, 1 chip, 8 cores/chip |
| Hardware Threads: | 16 (2 / core) |
| CPU(s) Orderable: | 1 chip |
| Primary Cache: | 32 KB I + 48 KB D on chip per core |
| Secondary Cache: | 512 KB I+D on chip per core |
| Tertiary Cache: | 16 MB I+D on chip per chip |
| Other Cache: | None |
| Memory Amount (GB): | 16 |
| # and size of DIMM: | 2 x 8192 MB |
| Memory Details: | 8GB 1Rx8 PC4-3200AA-ED2-11; slots 1, 3 populated |
| Power Supply Quantity and Rating (W): | 1 x 290 |
| Power Supply Details: | HPE 290W 94% Non-Redundant FIO Platinum Power Supply (P21649-B21) |
| Disk Drive: | 1 x HPE 240GB M.2 SATA M.2 2280 5300B SSD (P19888-B21) |
| Disk Controller: | Embedded SATA Controller |
| # and type of Network Interface Cards (NICs) Installed: | 1 x HPE Ethernet 1Gb 2-port BASE-T BCM5720 Adapter (onboard) |
| NICs Enabled in Firmware / OS / Connected: | 2/1/1 |
| Network Speed (Mbit): | 1000 |
| Keyboard: | None |
| Mouse: | None |
| Monitor: | None |
| Optical Drives: | No |
| Other Hardware: | None |
| Software | |
|---|---|
| Power Management: | Enabled (see SUT Notes) |
| Operating System (OS): | Windows Server 2019 Datacenter |
| OS Version: | Version 1809 (OS Build 17763.2114) |
| Filesystem: | NTFS |
| JVM Vendor: | Oracle Corporation |
| JVM Version: | Java HotSpot(TM) 64-Bit Server VM 18.9 (build 11.0.9+7-LTS, mixed mode) |
| JVM Command-line Options: | -server -Xmn10500m -Xms12000m -Xmx12000m -XX:SurvivorRatio=1 -XX:TargetSurvivorRatio=99 -XX:ParallelGCThreads=16 -XX:AllocatePrefetchDistance=256 -XX:AllocatePrefetchLines=4 -XX:LoopUnrollLimit=45 -XX:InitialTenuringThreshold=12 -XX:MaxTenuringThreshold=15 -XX:InlineSmallCode=3900 -XX:MaxInlineSize=270 -XX:FreqInlineSize=2500 -XX:+UseLargePages -XX:+UseParallelOldGC -XX:UseAVX=0 -XX:-UseAdaptiveSizePolicy -XX:-ThreadLocalHandshakes |
| JVM Affinity: | None |
| JVM Instances: | 1 |
| JVM Initial Heap (MB): | 12000 |
| JVM Maximum Heap (MB): | 12000 |
| JVM Address Bits: | 64 |
| Boot Firmware Version: | U60 v1.54 (01/13/2022) |
| Management Firmware Version: | 2.55 Oct 01 2021 |
| Workload Version: | SSJ 1.2.10 |
| Director Location: | Controller |
| Other Software: | KB5005030 |
| Hardware | |
|---|---|
| Hardware Vendor: | Hewlett-Packard Company |
| Model: | ProLiant DL360p Gen8 |
| CPU Description: | Intel Xeon E5-2660 v3 |
| Memory amount (GB): | 128 |
| Software | |
|---|---|
| Operating System (OS): | Windows Server 2012 R2 Standard |
| JVM Vendor: | Oracle Corporation |
| JVM Version: | 1.8.0_251-b08 |
| CCS Version: | 1.2.6 |
| Power Analyzer pwr1 | |
|---|---|
| Hardware Vendor: | Yokogawa |
| Model: | WT310 |
| Serial Number: | C2QM22005V |
| Connectivity: | GPIB vi NI GPIB-USB-HS |
| Input Connection: | Default |
| Metrology Institute: | NIST |
| Accredited by: | TRANSCAT |
| Calibration Label: | 5-F91A5-20-1 |
| Date of Calibration: | 26-Jun-2021 |
| PTDaemon Host System: | same as CCS |
| PTDaemon Host OS: | same as CCS |
| PTDaemon Version: | 1.9.2-3976349f-20201208 |
| Setup Description: | SUT Power Supply 1 |
| Temperature Sensor temp1 | |
|---|---|
| Hardware Vendor: | Digi International Inc. |
| Model: | Watchport/H |
| Driver Version: | 5.70.105.0 |
| Connectivity: | USB |
| PTDaemon Host System: | same as CCS |
| PTDaemon Host OS: | same as CCS |
| Setup Description: | 5 mm in front of SUT main intake |
| Target Load | Average Active Power (W) | Minimum Ambient Temperature (°C) |
|---|---|---|
| 100% | 81.5 | 22.2 |
| 90% | 70.1 | 22.4 |
| 80% | 59.8 | 22.4 |
| 70% | 51.1 | 22.3 |
| 60% | 45.4 | 22.2 |
| 50% | 40.7 | 22.1 |
| 40% | 36.5 | 21.9 |
| 30% | 33.1 | 21.8 |
| 20% | 30.3 | 21.8 |
| 10% | 27.2 | 21.6 |
| Active Idle | 21.5 | 21.6 |
| Line Standard | Minimum Temperature (°C) | Elevation (m) |
|---|---|---|
| 208V / 60 Hz / 1 phase / 2 wires | 21.6 | 132 |
| Target Load | Actual Load | ssj_ops | |
|---|---|---|---|
| Target | Actual | ||
| Calibration 1 | 846,413 | ||
| Calibration 2 | 847,464 | ||
| Calibration 3 | 845,856 | ||
| ssj_ops@calibrated=846,660 | |||
| 100% | 100.4% | 846,660 | 849,748 |
| 90% | 89.8% | 761,994 | 760,072 |
| 80% | 80.1% | 677,328 | 678,255 |
| 70% | 69.9% | 592,662 | 592,146 |
| 60% | 60.0% | 507,996 | 508,225 |
| 50% | 50.0% | 423,330 | 423,424 |
| 40% | 39.8% | 338,664 | 336,855 |
| 30% | 30.0% | 253,998 | 253,725 |
| 20% | 20.0% | 169,332 | 169,111 |
| 10% | 10.0% | 84,666 | 84,327 |
| Active Idle | 0 | 0 | |