| Hewlett Packard Enterprise ProLiant DL365 Gen11 | SPECpower_ssj2008 = 26,371 overall ssj_ops/watt | ||||
| Test Sponsor: | Hewlett Packard Enterprise | SPEC License #: | 3 | Test Method: | Single Node |
| Tested By: | Hewlett Packard Enterprise | Test Location: | Houston, TX, USA | Test Date: | May 23, 2023 |
| Hardware Availability: | Jul-2023 | Software Availability: | Jul-2023 | Publication: | Jun 13, 2023 |
| System Source: | Single Supplier | System Designation: | Server | Power Provisioning: | Line-powered |
| Performance | Power | Performance to Power Ratio | ||
|---|---|---|---|---|
| Target Load | Actual Load | ssj_ops | Average Active Power (W) | |
| 100% | 99.3% | 23,575,900 | 701 | 33,628 |
| 90% | 89.7% | 21,301,278 | 655 | 32,511 |
| 80% | 80.0% | 18,984,077 | 597 | 31,804 |
| 70% | 70.0% | 16,605,823 | 555 | 29,894 |
| 60% | 60.0% | 14,237,190 | 499 | 28,538 |
| 50% | 50.0% | 11,877,352 | 460 | 25,799 |
| 40% | 40.0% | 9,489,555 | 418 | 22,722 |
| 30% | 30.0% | 7,128,203 | 368 | 19,395 |
| 20% | 20.0% | 4,741,718 | 311 | 15,235 |
| 10% | 10.0% | 2,380,323 | 254 | 9,362 |
| Active Idle | 0 | 123 | 0 | |
| ∑ssj_ops / ∑power = | 26,371 | |||
| Set Identifier: | SUT |
| Set Description: | System Under Test |
| # of Identical Nodes: | 1 |
| Comment: | SUT |
| Hardware | |
|---|---|
| Hardware Vendor: | Hewlett Packard Enterprise |
| Model: | ProLiant DL365 Gen11 |
| Form Factor: | 1U |
| CPU Name: | AMD EPYC 9754 2.25 GHz |
| CPU Characteristics: | 128-Core, 2.25 GHz, 256MB L3 Cache |
| CPU Frequency (MHz): | 2250 |
| CPU(s) Enabled: | 256 cores, 2 chips, 128 cores/chip |
| Hardware Threads: | 512 (2 / core) |
| CPU(s) Orderable: | 1,2 chips |
| Primary Cache: | 32 KB I + 32 KB D on chip per core |
| Secondary Cache: | 1 MB I+D on chip per core |
| Tertiary Cache: | 256 MB I+D on chip per chip |
| Other Cache: | None |
| Memory Amount (GB): | 384 |
| # and size of DIMM: | 24 x 16384 MB |
| Memory Details: | 16 GB 1Rx8 PC5-4800B-R; all slots populated on each socket |
| Power Supply Quantity and Rating (W): | 1 x 1000 |
| Power Supply Details: | HPE 1000W Flex Slot Titanium Hot Plug Power Supply Kit (P03178-B21) |
| Disk Drive: | 1 x HPE 480GB SATA 6G Read Intensive SFF BC Multi Vendor SSD (P40497-B21) |
| Disk Controller: | Embedded SATA Controller |
| # and type of Network Interface Cards (NICs) Installed: | 1 x HPE 1GbE 4p BASE-T I350-T4 OCP3 Adapter (P08449-B21) |
| NICs Enabled in Firmware / OS / Connected: | 4/4/1 |
| Network Speed (Mbit): | 1000 |
| Keyboard: | None |
| Mouse: | None |
| Monitor: | None |
| Optical Drives: | No |
| Other Hardware: | None |
| Software | |
|---|---|
| Power Management: | Enabled (see SUT Notes) |
| Operating System (OS): | Windows Server 2022 Datacenter |
| OS Version: | Version 21H2 (OS Build 20348.1668) |
| Filesystem: | NTFS |
| JVM Vendor: | Oracle Corporation |
| JVM Version: | Java HotSpot(TM) 64-Bit Server VM 18.9 (build 17.0.2+8-LTS-86, mixed mode) |
| JVM Command-line Options: | -set JAVAOPTIONS_SSJ=-server -Xms1500m -Xmx1500m -Xmn1300m -XX:+UseParallelGC -XX:ParallelGCThreads=2 -XX:+UseLargePages -XX:LargePageSizeInBytes=2m -XX:+UseBiasedLocking -XX:InlineSmallCode=1500 -XX:UseAVX=1 -XX:AutoBoxCacheMax=20000 -XX:+OptimizeFill -XX:+AggressiveHeap |
| JVM Affinity: | start NODE [0-7] /AFFINITY [0xF-0xF000000000000000] |
| JVM Instances: | 128 |
| JVM Initial Heap (MB): | 1500 |
| JVM Maximum Heap (MB): | 1500 |
| JVM Address Bits: | 64 |
| Boot Firmware Version: | A55 v1.34 (04/06/2023) |
| Management Firmware Version: | 1.30 Feb 28 2023 |
| Workload Version: | SSJ 1.2.10 |
| Director Location: | Controller |
| Other Software: | HPE ProLiant Agentless Management Service for Windows X64 |
| Hardware | |
|---|---|
| Hardware Vendor: | Hewlett Packard Enterprise |
| Model: | ProLiant DL360 Gen9 |
| CPU Description: | 2x Intel Xeon E5-2660 v3 |
| Memory amount (GB): | 64 |
| Software | |
|---|---|
| Operating System (OS): | Windows Server 2019 |
| JVM Vendor: | Oracle Corporation |
| JVM Version: | 1.8.0_201-b09 (build 25.201-b09, mixed mode) |
| CCS Version: | 1.2.6 |
| Power Analyzer pwr1 | |
|---|---|
| Hardware Vendor: | Yokogawa |
| Model: | WT210 |
| Serial Number: | C2M22001V |
| Connectivity: | GPIB vi NI GPIB-USB-HS |
| Input Connection: | Default |
| Metrology Institute: | NIST |
| Accredited by: | TRANSCAT |
| Calibration Label: | 5-G38EE-40-1 |
| Date of Calibration: | 15-Dec-2022 |
| PTDaemon Host System: | same as CCS |
| PTDaemon Host OS: | same as CCS |
| PTDaemon Version: | 1.10.0-82175bac-20220817 |
| Setup Description: | SUT Power Supply 1 |
| Temperature Sensor temp1 | |
|---|---|
| Hardware Vendor: | Digi International Inc. |
| Model: | Watchport/H |
| Driver Version: | 5.70.105.0 |
| Connectivity: | USB |
| PTDaemon Host System: | same as CCS |
| PTDaemon Host OS: | same as CCS |
| Setup Description: | 5 mm in front of SUT main intake |
| Target Load | Average Active Power (W) | Minimum Ambient Temperature (°C) |
|---|---|---|
| 100% | 701 | 24.1 |
| 90% | 655 | 23.1 |
| 80% | 597 | 23.2 |
| 70% | 555 | 24.0 |
| 60% | 499 | 24.6 |
| 50% | 460 | 23.2 |
| 40% | 418 | 23.2 |
| 30% | 368 | 24.1 |
| 20% | 311 | 24.6 |
| 10% | 254 | 24.9 |
| Active Idle | 123 | 24.9 |
| Line Standard | Minimum Temperature (°C) | Elevation (m) |
|---|---|---|
| 208V / 60 Hz / 1 phase / 2 wires | 23.1 | 132 |
| Target Load | Actual Load | ssj_ops | |
|---|---|---|---|
| Target | Actual | ||
| Calibration 1 | 24,405,481 | ||
| Calibration 2 | 23,780,803 | ||
| Calibration 3 | 23,693,571 | ||
| ssj_ops@calibrated=23,737,187 | |||
| 100% | 99.3% | 23,737,187 | 23,575,900 |
| 90% | 89.7% | 21,363,468 | 21,301,278 |
| 80% | 80.0% | 18,989,750 | 18,984,077 |
| 70% | 70.0% | 16,616,031 | 16,605,823 |
| 60% | 60.0% | 14,242,312 | 14,237,190 |
| 50% | 50.0% | 11,868,594 | 11,877,352 |
| 40% | 40.0% | 9,494,875 | 9,489,555 |
| 30% | 30.0% | 7,121,156 | 7,128,203 |
| 20% | 20.0% | 4,747,437 | 4,741,718 |
| 10% | 10.0% | 2,373,719 | 2,380,323 |
| Active Idle | 0 | 0 | |