| Supermicro Server AS-1015CS-TNR | SPECpower_ssj2008 = 29,021 overall ssj_ops/watt | ||||
| Test Sponsor: | Supermicro | SPEC License #: | 1176 | Test Method: | Single Node |
| Tested By: | Supermicro | Test Location: | Zhonghe Dist, New Taipei City, Taiwan (R.O.C.) | Test Date: | May 27, 2023 |
| Hardware Availability: | Nov-2022 | Software Availability: | May-2023 | Publication: | Jun 21, 2023 |
| System Source: | Single Supplier | System Designation: | Server | Power Provisioning: | Line-powered |
| Performance | Power | Performance to Power Ratio | ||
|---|---|---|---|---|
| Target Load | Actual Load | ssj_ops | Average Active Power (W) | |
| 100% | 99.6% | 13,753,308 | 394 | 34,872 |
| 90% | 89.5% | 12,355,300 | 341 | 36,274 |
| 80% | 79.9% | 11,035,894 | 299 | 36,884 |
| 70% | 70.0% | 9,670,187 | 278 | 34,791 |
| 60% | 59.8% | 8,259,005 | 258 | 32,000 |
| 50% | 49.8% | 6,872,374 | 237 | 28,961 |
| 40% | 40.0% | 5,531,211 | 217 | 25,511 |
| 30% | 30.0% | 4,143,956 | 191 | 21,656 |
| 20% | 20.0% | 2,758,744 | 168 | 16,401 |
| 10% | 10.0% | 1,382,417 | 147 | 9,398 |
| Active Idle | 0 | 79.6 | 0 | |
| ∑ssj_ops / ∑power = | 29,021 | |||
| Set Identifier: | sut |
| Set Description: | System Under Test |
| # of Identical Nodes: | 1 |
| Comment: | None |
| Hardware | |
|---|---|
| Hardware Vendor: | Supermicro |
| Model: | Server AS-1015CS-TNR |
| Form Factor: | 1U |
| CPU Name: | AMD EPYC 9754,2.25GHz |
| CPU Characteristics: | 128 Core, 2.25GHz, 256 MB cache |
| CPU Frequency (MHz): | 2250 |
| CPU(s) Enabled: | 128 cores, 1 chip, 128 cores/chip |
| Hardware Threads: | 256 (2 / core) |
| CPU(s) Orderable: | 1 chip |
| Primary Cache: | 32 KB I + 32 KB D on chip per core |
| Secondary Cache: | 1 MB I+D on chip per core |
| Tertiary Cache: | 256 MB I+D on chip per chip, 32 MB shared / 8 cores |
| Other Cache: | None |
| Memory Amount (GB): | 384 |
| # and size of DIMM: | 12 x 32 GB |
| Memory Details: | 32GB 2Rx8 DDR5-4800; CPU1 A1,B1,C1,D1,E1,F1,G1,H1,I1,J1,K1,L1 populated. |
| Power Supply Quantity and Rating (W): | 1 x 860 |
| Power Supply Details: | PWS-860P-1R2 |
| Disk Drive: | 1x480GB M.2 NVMe GEN4 Micron,MTFDKBA480TFR-1BC1ZABYY |
| Disk Controller: | onboard SCU controller |
| # and type of Network Interface Cards (NICs) Installed: | 1 x Dual Intel I350 Gigabit Ethernet controller, AOC-AG-i2M |
| NICs Enabled in Firmware / OS / Connected: | 2/2/1 |
| Network Speed (Mbit): | 1000 |
| Keyboard: | None |
| Mouse: | None |
| Monitor: | None |
| Optical Drives: | No |
| Other Hardware: | None |
| Software | |
|---|---|
| Power Management: | Power Saver (see SUT Notes) |
| Operating System (OS): | Microsoft Windows Server 2022 Datacenter |
| OS Version: | Version 10.0.20348 Build 20348 |
| Filesystem: | NTFS |
| JVM Vendor: | Oracle Corporation |
| JVM Version: | OpenJDK 64-Bit Server VM build 17.0.1+12-39, mixed mode |
| JVM Command-line Options: | -server -Xms2048m -Xmx2048m -Xmn1900m -XX:+UseParallelGC -XX:ParallelGCThreads=4 -XX:+UseLargePages -XX:LargePageSizeInBytes=2m -XX:+UseBiasedLocking -XX:InlineSmallCode=1500 -XX:UseAVX=1 XX:AutoBoxCacheMax=20000-XX:+OptimizeFill -XX:+AggressiveHeap |
| JVM Affinity: | start /NODE [0-15] /AFFINITY [0xF, 0xF0, 0xF00, 0xF000] |
| JVM Instances: | 64 |
| JVM Initial Heap (MB): | 2048 |
| JVM Maximum Heap (MB): | 2048 |
| JVM Address Bits: | 64 |
| Boot Firmware Version: | 1.4 |
| Management Firmware Version: | 01.00.18 |
| Workload Version: | SSJ 1.2.10 |
| Director Location: | Controller |
| Other Software: | KB5026370 |
| Hardware | |
|---|---|
| Hardware Vendor: | Supermicro |
| Model: | X11DPG |
| CPU Description: | Intel(R) Xeon(R) Gold 6142 2.60G |
| Memory amount (GB): | 96 |
| Software | |
|---|---|
| Operating System (OS): | Microsoft Windows Server 2019 Datacenter |
| JVM Vendor: | Oracle Corporation |
| JVM Version: | Jave(TM) SE Runtime Environment (build 1.7.0_80-b15) Java HotSpot(TM) 64-Bit Server VM(build 24.80-b11) |
| CCS Version: | 1.2.6 |
| Power Analyzer pwr1 | |
|---|---|
| Hardware Vendor: | Yokogawa Meters and Instruments Corporation. |
| Model: | WT310 |
| Serial Number: | C3RF27027E |
| Connectivity: | GPIB |
| Input Connection: | Default |
| Metrology Institute: | NML (National Measurement Laboratory) |
| Accredited by: | Omnio Calibration Lab. Co., Ltd. |
| Calibration Label: | OCL-230203F01008 |
| Date of Calibration: | 03-Feb-2023 |
| PTDaemon Host System: | same as CCS |
| PTDaemon Host OS: | same as CCS |
| PTDaemon Version: | 1.10.0-82175bac-20220817 |
| Setup Description: | SUT Power Supply |
| Temperature Sensor temp1 | |
|---|---|
| Hardware Vendor: | Digi International Inc. |
| Model: | Watchport/H |
| Driver Version: | 5.10.26.0 |
| Connectivity: | USB |
| PTDaemon Host System: | same as CCS |
| PTDaemon Host OS: | same as CCS |
| Setup Description: | 10 mm in front of SUT main air intake |
| Target Load | Average Active Power (W) | Minimum Ambient Temperature (°C) |
|---|---|---|
| 100% | 394 | 30.6 |
| 90% | 341 | 30.2 |
| 80% | 299 | 30.3 |
| 70% | 278 | 30.8 |
| 60% | 258 | 30.8 |
| 50% | 237 | 30.2 |
| 40% | 217 | 30.2 |
| 30% | 191 | 30.6 |
| 20% | 168 | 30.8 |
| 10% | 147 | 30.4 |
| Active Idle | 79.6 | 30.3 |
| Line Standard | Minimum Temperature (°C) | Elevation (m) |
|---|---|---|
| 220V / 50 Hz / 1 phase / 2 wires | 30.2 | 10 |
| Target Load | Actual Load | ssj_ops | |
|---|---|---|---|
| Target | Actual | ||
| Calibration 1 | 14,021,122 | ||
| Calibration 2 | 13,833,403 | ||
| Calibration 3 | 13,788,400 | ||
| ssj_ops@calibrated=13,810,902 | |||
| 100% | 99.6% | 13,810,902 | 13,753,308 |
| 90% | 89.5% | 12,429,811 | 12,355,300 |
| 80% | 79.9% | 11,048,721 | 11,035,894 |
| 70% | 70.0% | 9,667,631 | 9,670,187 |
| 60% | 59.8% | 8,286,541 | 8,259,005 |
| 50% | 49.8% | 6,905,451 | 6,872,374 |
| 40% | 40.0% | 5,524,361 | 5,531,211 |
| 30% | 30.0% | 4,143,270 | 4,143,956 |
| 20% | 20.0% | 2,762,180 | 2,758,744 |
| 10% | 10.0% | 1,381,090 | 1,382,417 |
| Active Idle | 0 | 0 | |