Hewlett Packard Enterprise ProLiant DL145 Gen11 SPECpower_ssj2008 = 24,781 overall ssj_ops/watt
Test Sponsor: Hewlett Packard Enterprise SPEC License #: 3 Test Method: Single Node
Tested By: Hewlett Packard Enterprise Test Location: Houston, TX, USA Test Date: Sep 23, 2024
Hardware Availability: Oct-2024 Software Availability: Jul-2024 Publication: Oct 10, 2024
System Source: Single Supplier System Designation: Server Power Provisioning: Line-powered
Benchmark Results Summary
Performance Power Performance to Power Ratio
Target Load Actual Load ssj_ops Average Active Power (W)
100% 99.7% 6,347,593 210 30,197
90% 89.1% 5,673,052 192 29,533
80% 79.9% 5,088,973 173 29,417
70% 69.9% 4,452,459 153 29,025
60% 60.1% 3,825,526 133 28,752
50% 49.9% 3,177,526 121 26,178
40% 40.0% 2,549,750 111 22,914
30% 30.0% 1,911,544 101 18,985
20% 20.0% 1,276,258 89.7 14,231
10% 10.1% 640,798 78.5 8,165
Active Idle 0 46.8 0
∑ssj_ops / ∑power = 24,781
Graph of results
System Under Test
Set: 'SUT'
Set Identifier: SUT
Set Description: System Under Test
# of Identical Nodes: 1
Comment: SUT
Hardware
Hardware Vendor: Hewlett Packard Enterprise
Model: ProLiant DL145 Gen11
Form Factor: 2U
CPU Name: AMD EPYC 8534P 2.30 GHz 64-core
CPU Characteristics: 64-Core, 2.30 GHz, 128MB L3 Cache
CPU Frequency (MHz): 2300
CPU(s) Enabled: 64 cores, 1 chip, 64 cores/chip
Hardware Threads: 128 (2 / core)
CPU(s) Orderable: 1 chip
Primary Cache: 31 KB I + 32 KB D on chip per core
Secondary Cache: 1 MB I+D on chip per core
Tertiary Cache: 128 MB I+D on chip per chip
Other Cache: None
Memory Amount (GB): 96
# and size of DIMM: 6 x 16384 MB
Memory Details: HPE 16GB (1x16GB) Single Rank x8 DDR5-4800 CAS-40-39-39 EC8 Registered Smart Memory Kit; slots 1, 2, 3, 4, 5 & 6 on each socket (P43322-B21)
Power Supply Quantity and Rating (W): 1 x 700
Power Supply Details: HPE 700W PSU 94% (P44975-B21)
Disk Drive: 1 x HPE 480GB SATA 6G Read Intensive SFF BC Multi Vendor SSD (P40497-B21)
Disk Controller: Embedded SATA
# and type of Network Interface Cards (NICs) Installed: 1 x Intel I350-T4 Ethernet 1Gb 4-port BASE-T OCP3 Adapter for HPE (P08449-B21)
NICs Enabled in Firmware / OS / Connected: 4/4/1
Network Speed (Mbit): 1000
Keyboard: None
Mouse: None
Monitor: None
Optical Drives: No
Other Hardware: None
Software
Power Management: Enabled (see SUT Notes)
Operating System (OS): SUSE Linux Enterprise Server 15 SP5
OS Version: 5.14.21-150500.53-default
Filesystem: xfs
JVM Vendor: OpenJDK
JVM Version: OpenJDK 64-Bit Server VM (build 17.0.2+8-86, mixed mode, sharing)
JVM Command-line Options: -server -Xms1500m -Xmx1500m -Xmn1300m -XX:+UseParallelGC -XX:ParallelGCThreads=2 -XX:+UseLargePages -XX:LargePageSizeInBytes=2m -XX:+UseBiasedLocking -XX:InlineSmallCode=1500 -XX:UseAVX=1 -XX:AutoBoxCacheMax=20000 -XX:+OptimizeFill -XX:+AggressiveHeap
JVM Affinity: for each even physicalCoreId { numactl -C physicalCoreId, physicalCoreId+1, physicalCoreId + 64, physicalCoreId + 65 }
JVM Instances: 32
JVM Initial Heap (MB): 1500
JVM Maximum Heap (MB): 1500
JVM Address Bits: 64
Boot Firmware Version: A58 v1.20 (08/09/2024)
Management Firmware Version: 1.61 Jul 10 2024
Workload Version: SSJ 1.2.10
Director Location: Controller
Other Software: HPE ProLiant Agentless Management Service for SUSE LINUX Enterprise Server 15
Boot Firmware Settings
BIOS Platform Configuration (RBSU):
Management Firmware Settings
See SUT Notes
System Under Test Notes
Controller System
Hardware
Hardware Vendor: Hewlett Packard Enterprise
Model: ProLiant DL360 G9
CPU Description: 2x Intel Xeon E5-2660 v3
Memory amount (GB): 128
Software
Operating System (OS): Windows Server 2019
JVM Vendor: Oracle Corporation
JVM Version: 1.8.0_251-b08 (build 25.251-b08, mixed mode)
CCS Version: 1.2.6
Measurement Devices
Power Analyzer pwr1
Hardware Vendor: Yokogawa
Model: WT310
Serial Number: C2QM22004V
Connectivity: GPIB vi NI GPIB-USB-HS
Input Connection: Default
Metrology Institute: NIST
Accredited by: TRANSCAT
Calibration Label: 5-H48PA-180-1
Date of Calibration: 01-Aug-2024
PTDaemon Host System: same as CCS
PTDaemon Host OS: same as CCS
PTDaemon Version: 1.11.0-a4047d62-20231205
Setup Description: SUT Power Supply
Temperature Sensor temp1
Hardware Vendor: Digi International Inc.
Model: Watchport/H
Driver Version: 5.70.105.0
Connectivity: USB
PTDaemon Host System: same as CCS
PTDaemon Host OS: same as CCS
Setup Description: 5 mm in front of SUT main intake
Notes
None
Aggregate Electrical and Environmental Data
Target Load Average Active Power (W) Minimum Ambient Temperature (°C)
100% 210 23.9
90% 192 23.9
80% 173 23.8
70% 153 24.1
60% 133 24.6
50% 121 24.8
40% 111 24.9
30% 101 25.3
20% 89.7 25.2
10% 78.5 25.2
Active Idle 46.8 25.5
Line Standard Minimum Temperature (°C) Elevation (m)
208V / 60 Hz / 1 phase / 2 wires 23.8 132
See the Power/Temperature Details Report for additional details.
Aggregate Performance Data
Target Load Actual Load ssj_ops
Target Actual
Calibration 1     6,100,842
Calibration 2     6,352,506
Calibration 3     6,384,586
ssj_ops@calibrated=6,368,546
100% 99.7% 6,368,546 6,347,593
90% 89.1% 5,731,691 5,673,052
80% 79.9% 5,094,837 5,088,973
70% 69.9% 4,457,982 4,452,459
60% 60.1% 3,821,127 3,825,526
50% 49.9% 3,184,273 3,177,526
40% 40.0% 2,547,418 2,549,750
30% 30.0% 1,910,564 1,911,544
20% 20.0% 1,273,709 1,276,258
10% 10.1% 636,855 640,798
Active Idle   0 0
Graph of results
See the Host Performance Report for additional details.