| Dell Inc. PowerEdge R770 | SPECpower_ssj2008 = 21,029 overall ssj_ops/watt | ||||
| Test Sponsor: | Dell Inc. | SPEC License #: | 6573 | Test Method: | Single Node |
| Tested By: | Dell Inc. | Test Location: | Round Rock, TX, USA | Test Date: | Mar 11, 2025 |
| Hardware Availability: | Mar-2025 | Software Availability: | Oct-2024 | Publication: | Mar 26, 2025 |
| System Source: | Single Supplier | System Designation: | Server | Power Provisioning: | Line-powered |
| Performance | Power | Performance to Power Ratio | ||
|---|---|---|---|---|
| Target Load | Actual Load | ssj_ops | Average Active Power (W) | |
| 100% | 99.8% | 22,815,824 | 943 | 24,200 |
| 90% | 90.0% | 20,573,668 | 896 | 22,973 |
| 80% | 80.0% | 18,275,559 | 769 | 23,779 |
| 70% | 70.0% | 15,999,259 | 674 | 23,728 |
| 60% | 60.0% | 13,707,130 | 590 | 23,231 |
| 50% | 50.0% | 11,423,709 | 514 | 22,239 |
| 40% | 39.9% | 9,129,584 | 441 | 20,700 |
| 30% | 30.0% | 6,856,849 | 382 | 17,949 |
| 20% | 20.0% | 4,573,809 | 332 | 13,767 |
| 10% | 10.0% | 2,292,108 | 278 | 8,241 |
| Active Idle | 0 | 157 | 0 | |
| ∑ssj_ops / ∑power = | 21,029 | |||
| Set Identifier: | sut |
| Set Description: | System Under Test |
| # of Identical Nodes: | 1 |
| Comment: | SUT |
| Hardware | |
|---|---|
| Hardware Vendor: | Dell Inc. |
| Model: | PowerEdge R770 |
| Form Factor: | 2U |
| CPU Name: | Intel Xeon 6787P 2.0 GHz (Intel Turbo Boost Technology up to 3.80 GHz) |
| CPU Characteristics: | 86-Core, 2.00 GHz, 336MB L3 Cache |
| CPU Frequency (MHz): | 2000 |
| CPU(s) Enabled: | 172 cores, 2 chips, 86 cores/chip |
| Hardware Threads: | 344 (2 / core) |
| CPU(s) Orderable: | 1,2 chips |
| Primary Cache: | 32 KB I + 48 KB D on chip per core |
| Secondary Cache: | 2 MB I+D on chip per core |
| Tertiary Cache: | 336 MB I+D on chip per chip |
| Other Cache: | None |
| Memory Amount (GB): | 256 |
| # and size of DIMM: | 16 x 16 GB |
| Memory Details: | 16GB 1Rx8 PC5-6400; slots Slots A1-8, B1-B8 populated. |
| Power Supply Quantity and Rating (W): | 1 x 1500 |
| Power Supply Details: | 1500W 60mm Titanium - mixed mode, Dell p/n GRD17 |
| Disk Drive: | 1 x Dell EC NVMe ISE 7450 RI M.2 80 480GB, Dell p/n 3H1F4 |
| Disk Controller: | BOSS controller card, Dell p/n CMFVP |
| # and type of Network Interface Cards (NICs) Installed: | 1 x 1GbE BT 4P Broadcom OCP 3.0, Dell p/n M2PYY |
| NICs Enabled in Firmware / OS / Connected: | 4/4/1 |
| Network Speed (Mbit): | 1000 |
| Keyboard: | None |
| Mouse: | None |
| Monitor: | None |
| Optical Drives: | No |
| Other Hardware: | None |
| Software | |
|---|---|
| Power Management: | Enabled (see SUT Notes) |
| Operating System (OS): | Microsoft Windows Server 2022 Standard |
| OS Version: | Version 21H2(OS Build 20348.1251) |
| Filesystem: | NTFS |
| JVM Vendor: | Oracle Corporation |
| JVM Version: | Oracle Java HotSpot(TM) 64-Bit Server VM (build 17.0.13+10-LTS-268, mixed mode) |
| JVM Command-line Options: | -server -Xms1300m -Xmx1300m -Xmn1100m -XX:+UseBiasedLocking -XX:+UseParallelGC -XX:ParallelGCThreads=2 -XX:+UseLargePages -XX:LargePageSizeInBytes=2m -XX:InlineSmallCode=1500 -XX:UseAVX=1 -XX:AutoBoxCacheMax=20000 -XX:+OptimizeFill -XX:+AggressiveHeap -XX:FreqInlineSize=2500 -XX:CompileThresholdScaling=220 |
| JVM Affinity: | start /NODE [0-7] /AFFINITY [0xF,0xF0,0xF00,0xF000,0xF0000,0xF00000,0xF000000,0xF0000000,0xF00000000,0xF000000000,0xF0000000000] |
| JVM Instances: | 86 |
| JVM Initial Heap (MB): | 1300 |
| JVM Maximum Heap (MB): | 1300 |
| JVM Address Bits: | 64 |
| Boot Firmware Version: | 0.5.62 |
| Management Firmware Version: | 1.20.25.00 |
| Workload Version: | SSJ 1.2.10 |
| Director Location: | Controller |
| Other Software: | None |
| Hardware | |
|---|---|
| Hardware Vendor: | Dell Inc |
| Model: | PowerEdge R450 |
| CPU Description: | 2 x Intel Xeon Silver 4310 CPU, 2.10 GHz |
| Memory amount (GB): | 64 |
| Software | |
|---|---|
| Operating System (OS): | Microsoft Windows Server 2022 Datacenter |
| JVM Vendor: | Oracle Corporation |
| JVM Version: | Hotspot(TM) Client VM, version 15.0.2+7 (build 15.0.2+7, mixed mode) |
| CCS Version: | 1.2.6 |
| Power Analyzer pwr1 | |
|---|---|
| Hardware Vendor: | Yokogawa Meters and Instruments Corporation |
| Model: | WT310E |
| Serial Number: | T11733387 |
| Connectivity: | RS-232 |
| Input Connection: | Default |
| Metrology Institute: | NIST |
| Accredited by: | TesCom |
| Calibration Label: | T11733387 |
| Date of Calibration: | 24-Jul-2025 |
| PTDaemon Host System: | same as CCS |
| PTDaemon Host OS: | same as CCS |
| PTDaemon Version: | 1.11.1-462c978e-20240907 |
| Setup Description: | Connected to power supply |
| Temperature Sensor temp1 | |
|---|---|
| Hardware Vendor: | Digi International Inc. |
| Model: | Watchport/H |
| Driver Version: | 5.10.26.0 |
| Connectivity: | USB |
| PTDaemon Host System: | same as CCS |
| PTDaemon Host OS: | same as CCS |
| Setup Description: | 25 mm in front of SUT main airflow intake |
| Target Load | Average Active Power (W) | Minimum Ambient Temperature (°C) |
|---|---|---|
| 100% | 943 | 21.2 |
| 90% | 896 | 21.2 |
| 80% | 769 | 21.2 |
| 70% | 674 | 21.2 |
| 60% | 590 | 21.2 |
| 50% | 514 | 21.2 |
| 40% | 441 | 21.2 |
| 30% | 382 | 21.2 |
| 20% | 332 | 21.1 |
| 10% | 278 | 21.1 |
| Active Idle | 157 | 21.1 |
| Line Standard | Minimum Temperature (°C) | Elevation (m) |
|---|---|---|
| 208V / 60 Hz / 1 phase / 2 wires | 21.1 | 255 |
| Target Load | Actual Load | ssj_ops | |
|---|---|---|---|
| Target | Actual | ||
| Calibration 1 | 23,437,063 | ||
| Calibration 2 | 22,846,464 | ||
| Calibration 3 | 22,867,749 | ||
| ssj_ops@calibrated=22,857,107 | |||
| 100% | 99.8% | 22,857,107 | 22,815,824 |
| 90% | 90.0% | 20,571,396 | 20,573,668 |
| 80% | 80.0% | 18,285,685 | 18,275,559 |
| 70% | 70.0% | 15,999,975 | 15,999,259 |
| 60% | 60.0% | 13,714,264 | 13,707,130 |
| 50% | 50.0% | 11,428,553 | 11,423,709 |
| 40% | 39.9% | 9,142,843 | 9,129,584 |
| 30% | 30.0% | 6,857,132 | 6,856,849 |
| 20% | 20.0% | 4,571,421 | 4,573,809 |
| 10% | 10.0% | 2,285,711 | 2,292,108 |
| Active Idle | 0 | 0 | |