Skip navigation

Standard Performance Evaluation Corporation

Facebook logo LinkedIn logo Twitter logo Google+ logo
 
 

ISO 21836:2020 SERT® Suite Requirements

The base component versions for ISO/IEC 21836:2020 SEEM testing using the SPEC® SERT suite are:
●  The SERT suite version 2.0.1, 2.0.2, 2.0.3 or later 2.x.x versions which comply with minor version test plans listed in the ISO specification section 9.3.3.
●  The PTDaemon® tool version 1.8.1, 1.9.0, 1.9.1, or later versions which comply with minor version test plans listed in the ISO specification section 9.3.4.
●  Power Analyzers and Temperature Sensors listed in Annex B of the ISO specification. Support for new devices may be obtained using the test processes laid out in sections 9.2.2 and 9.2.3 of the ISO documentation.
●  A number of CPU, Operating System, and Java Virtual Machine combinations were tested and pre-approved at the time the ISO specification was authored. These combinations can be found in Annex A of that specification. Additional combinations of CPU, OS, and JVM shall complete test plans per Clause 9 of the ISO specification prior to being used for SEEM results. Currently accepted client configurations can be found here.

More details regarding the ISO specification can be found here.

The following SPEC SERT suite components have been tested to the ISO requirement and are approved to obtain SEEM results just as the base components would.

The SERT suite versions below, not listed in section 9.3.2 of the ISO specification, have been tested and have been found to meet all requirements listed in section 9.3.3. These versions may be used in addition to the base versions to obtain SEEM results.

SERT Suite Version

Acceptance Data
N/A


The PTDaemon tool versions below, not listed in section 9.2.1 of the ISO specification, have been tested and have been found to meet all requirements listed in section 9.3.3. These versions may be used in addition to the base versions to obtain SEEM results.

PTDaemon Tool Version

Acceptance Data
N/A


The following power analyzers and temperature devices, which are not listed in Annex B of the ISO specification, have been tested and found to meet all requirements listed in section 9.2.2 and 9.2.3 respectively of the ISO documentation and have been added to the PTDaemon tool. These configurations can be used to obtain SEEM results:

Note1:  Please check device list on the PTDaemon tool webpage regarding required versions for indivudual power and temperature devices.
Note2:  Also check the compatibility list for SERT director operating system and interface compatibility.

Power Analyzers

Manufacturer

Model

Acceptance Data
N/A
N/A


Temperature Sensors

Manufacturer

Model

Acceptance Data
N/A
N/A



For CPU, Operating System, and Java Virtual Machine client configuration combinations tested and pre-approved at the time the ISO specification was authored(per Annex 1), as well as those which completed test plans per Clause 9 of the ISO specification please see the most recent JVM Client Configuration data.