Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 2.6.32-71.el6.x86_64 (mockbuild@x86-007.build.bos.redhat.com) (gcc version 4.4.4 20100726 (Red Hat 4.4.4-13) (GCC) ) #1 SMP Wed Sep 1 01:33:01 EDT 2010
Command line: initrd=vm-host/initramfs-2.6.32-71.el6.x86_64.img ro root=UUID=d6b66a1e-9a14-4b69-bb24-f16c774054f1 rd_NO_LUKS rd_NO_LVM rd_NO_MD rd_NO_DM LANG=en_US.UTF-8 SYSFONT=latarcyrheb-sun16 KEYBOARDTYPE=pc KEYTABLE=us crashkernel=auto intel_iommu=on iommu=pt BOOT_IMAGE=vm-host/vmlinuz-2.6.32-71.el6.x86_64 
KERNEL supported cpus:
  Intel GenuineIntel
  AMD AuthenticAMD
  Centaur CentaurHauls
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009d000 (usable)
 BIOS-e820: 000000000009d000 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000005a68f000 (usable)
 BIOS-e820: 000000005a68f000 - 000000005a6b3000 (ACPI data)
 BIOS-e820: 000000005a6b3000 - 000000005a6b4000 (ACPI NVS)
 BIOS-e820: 000000005a6b4000 - 000000005a6b5000 (ACPI data)
 BIOS-e820: 000000005a6b5000 - 000000005a6bc000 (ACPI NVS)
 BIOS-e820: 000000005a6bc000 - 000000005a6ff000 (usable)
 BIOS-e820: 000000005a6ff000 - 000000005a702000 (ACPI NVS)
 BIOS-e820: 000000005a702000 - 000000005a703000 (usable)
 BIOS-e820: 000000005a703000 - 000000005ab03000 (ACPI NVS)
 BIOS-e820: 000000005ab03000 - 0000000067371000 (usable)
 BIOS-e820: 0000000067371000 - 00000000673d2000 (ACPI NVS)
 BIOS-e820: 00000000673d2000 - 0000000067401000 (usable)
 BIOS-e820: 0000000067401000 - 000000006740f000 (ACPI NVS)
 BIOS-e820: 000000006740f000 - 000000006749b000 (usable)
 BIOS-e820: 000000006749b000 - 000000006749c000 (ACPI data)
 BIOS-e820: 000000006749c000 - 00000000674ac000 (ACPI NVS)
 BIOS-e820: 00000000674ac000 - 00000000674c0000 (usable)
 BIOS-e820: 00000000674c0000 - 00000000674e0000 (reserved)
 BIOS-e820: 00000000674e0000 - 0000000067573000 (usable)
 BIOS-e820: 0000000067573000 - 0000000067574000 (ACPI data)
 BIOS-e820: 0000000067574000 - 000000007cf2b000 (usable)
 BIOS-e820: 000000007cf2b000 - 000000007cf2e000 (reserved)
 BIOS-e820: 000000007cf2e000 - 000000007cf2f000 (ACPI data)
 BIOS-e820: 000000007cf2f000 - 000000007cf30000 (usable)
 BIOS-e820: 000000007cf30000 - 000000007cf31000 (reserved)
 BIOS-e820: 000000007cf31000 - 000000007d777000 (usable)
 BIOS-e820: 000000007d777000 - 000000007d83b000 (reserved)
 BIOS-e820: 000000007d83b000 - 000000007dcaf000 (usable)
 BIOS-e820: 000000007dcaf000 - 000000007dd5f000 (reserved)
 BIOS-e820: 000000007dd5f000 - 000000007e404000 (usable)
 BIOS-e820: 000000007e404000 - 000000007e405000 (ACPI data)
 BIOS-e820: 000000007e405000 - 000000007e76b000 (usable)
 BIOS-e820: 000000007e76b000 - 000000007e76c000 (ACPI NVS)
 BIOS-e820: 000000007e76c000 - 000000007f800000 (usable)
 BIOS-e820: 000000007f800000 - 0000000090000000 (reserved)
 BIOS-e820: 00000000fc000000 - 00000000fd000000 (reserved)
 BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
 BIOS-e820: 00000000ff800000 - 0000000100000000 (reserved)
 BIOS-e820: 0000000100000000 - 0000010080000000 (usable)
DMI 2.6 present.
e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
last_pfn = 0x10080000 max_arch_pfn = 0x400000000
MTRR default type: write-back
MTRR fixed ranges enabled:
  00000-9FFFF write-back
  A0000-FFFFF uncachable
MTRR variable ranges enabled:
  0 base 00080000000 mask FFF80000000 uncachable
  1 base 7FF80000000 mask FFF80000000 uncachable
  2 disabled
  3 disabled
  4 disabled
  5 disabled
  6 disabled
  7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
last_pfn = 0x7f800 max_arch_pfn = 0x400000000
initial memory mapped : 0 - 20000000
init_memory_mapping: 0000000000000000-000000007f800000
 0000000000 - 007f800000 page 2M
kernel direct mapping tables up to 7f800000 @ 8000-b000
init_memory_mapping: 0000000100000000-0000010080000000
 0100000000 - 10080000000 page 2M
kernel direct mapping tables up to 10080000000 @ 100000-505000
RAMDISK: 59993000 - 5a66ee82
ACPI: RSDP 00000000000fdfd0 00024 (v02 IBM   )
ACPI: XSDT 00000000675731c0 000BC (v01 IBM    SERMEGAL 00000000      01000013)
ACPI: FACP 000000005a6b2000 000F4 (v04 IBM    SERMEGAL 00000000 IBM  01000019)
ACPI Warning: Invalid length for Pm1aControlBlock: 32, using default 16 (20090903/tbfadt-607)
ACPI: DSDT 000000005a6a6000 04EC7 (v01 IBM    SERMEGAL 00000003 IBM  01000015)
ACPI: FACS 000000005a6b3000 00040
ACPI: TCPA 000000006749b000 00064 (v00                 00000000      00000000)
ACPI: ERST 000000005a6b4000 00230 (v01 IBM    SERMEGAL 00000001 IBM  0100001B)
ACPI: HPET 000000005a6b1000 00038 (v01 IBM    SERMEGAL 00000001 IBM  01000017)
ACPI: APIC 000000005a6b0000 0015E (v03 IBM    SERMEGAL 00000000 IBM  01000014)
ACPI: MCFG 000000005a6af000 0003C (v01 IBM    SERMEGAL 00000001 IBM  01000018)
ACPI: OEM0 000000005a6ae000 00358 (v03 IBM    XSECSRAT 00000100 IBM  01000013)
ACPI: SLIT 000000005a6ad000 00035 (v01 IBM    SERMEGAL 00000001 IBM  01000020)
ACPI: SRAT 000000005a6ac000 002F8 (v03 IBM    SERMEGAL 00000001 IBM  0100001A)
ACPI: SLIC 000000005a6ab000 00176 (v01 IBM    SERMEGAL 00000000 IBM  0100001F)
ACPI: SSDT 000000005a6a5000 004D5 (v02 IBM    CPUSCOPE 00004000 IBM  01000016)
ACPI: SSDT 000000005a6a4000 008A1 (v02 IBM    CPUWYVRN 00004000 IBM  01000016)
ACPI: SSDT 000000005a69b000 08A24 (v02 IBM    PSTATEPM 00004000 IBM  01000016)
ACPI: SSDT 000000005a69a000 00F92 (v02 IBM    CPUCSTAT 00004000 IBM  01000016)
ACPI: SSDT 000000005a699000 00214 (v02 IBM    WYVRNDEV 00004000 IBM  01000016)
ACPI: SSDT 000000005a698000 0009E (v02 IBM    WYVRNGPE 00004000 IBM  01000016)
ACPI: SSDT 000000005a697000 00F44 (v02 IBM    CPUNOTFY 00004000 IBM  01000016)
ACPI: SSDT 000000005a68f000 078C4 (v02 IBM    CPUTSTAT 00004000 IBM  01000016)
ACPI: DMAR 000000007cf2e000 000EC (v01 IBM    SERMEGAL 00000001 IBM  01000021)
ACPI: Local APIC address 0xfee00000
system APIC only can use physical flat
Setting APIC routing to physical flat.
SRAT: PXM 0 -> APIC 0 -> Node 0
SRAT: PXM 0 -> APIC 2 -> Node 0
SRAT: PXM 0 -> APIC 4 -> Node 0
SRAT: PXM 0 -> APIC 6 -> Node 0
SRAT: PXM 0 -> APIC 16 -> Node 0
SRAT: PXM 0 -> APIC 18 -> Node 0
SRAT: PXM 0 -> APIC 20 -> Node 0
SRAT: PXM 0 -> APIC 22 -> Node 0
SRAT: PXM 1 -> APIC 32 -> Node 1
SRAT: PXM 1 -> APIC 34 -> Node 1
SRAT: PXM 1 -> APIC 36 -> Node 1
SRAT: PXM 1 -> APIC 38 -> Node 1
SRAT: PXM 1 -> APIC 48 -> Node 1
SRAT: PXM 1 -> APIC 50 -> Node 1
SRAT: PXM 1 -> APIC 52 -> Node 1
SRAT: PXM 1 -> APIC 54 -> Node 1
SRAT: PXM 0 -> APIC 1 -> Node 0
SRAT: PXM 0 -> APIC 3 -> Node 0
SRAT: PXM 0 -> APIC 5 -> Node 0
SRAT: PXM 0 -> APIC 7 -> Node 0
SRAT: PXM 0 -> APIC 17 -> Node 0
SRAT: PXM 0 -> APIC 19 -> Node 0
SRAT: PXM 0 -> APIC 21 -> Node 0
SRAT: PXM 0 -> APIC 23 -> Node 0
SRAT: PXM 1 -> APIC 33 -> Node 1
SRAT: PXM 1 -> APIC 35 -> Node 1
SRAT: PXM 1 -> APIC 37 -> Node 1
SRAT: PXM 1 -> APIC 39 -> Node 1
SRAT: PXM 1 -> APIC 49 -> Node 1
SRAT: PXM 1 -> APIC 51 -> Node 1
SRAT: PXM 1 -> APIC 53 -> Node 1
SRAT: PXM 1 -> APIC 55 -> Node 1
SRAT: Node 0 PXM 0 0-80000000
SRAT: Node 0 PXM 0 100000000-4080000000
SRAT: Node 1 PXM 1 4080000000-8080000000
SRAT: Node 2 PXM 2 8080000000-c080000000
SRAT: Node 2 PXM 2 c080000000-10080000000
NUMA: Allocated memnodemap from 9000 - 9440
NUMA: Using 31 for the hash shift.
Bootmem setup node 0 0000000000000000-0000004080000000
  NODE_DATA [0000000000009440 - 000000000003d43f]
  bootmap [0000000000500000 -  0000000000d0ffff] pages 810
(10 early reservations) ==> bootmem [0000000000 - 4080000000]
  #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
  #1 [0000006000 - 0000008000]       TRAMPOLINE ==> [0000006000 - 0000008000]
  #2 [0001000000 - 0001c9eff8]    TEXT DATA BSS ==> [0001000000 - 0001c9eff8]
  #3 [0059993000 - 005a66ee82]          RAMDISK ==> [0059993000 - 005a66ee82]
  #4 [000009cc00 - 0000100000]    BIOS reserved ==> [000009cc00 - 0000100000]
  #5 [0001c9f000 - 0001c9f508]              BRK ==> [0001c9f000 - 0001c9f508]
  #6 [0000008000 - 0000009000]          PGTABLE ==> [0000008000 - 0000009000]
  #7 [0000100000 - 0000500000]          PGTABLE ==> [0000100000 - 0000500000]
  #8 [0000001000 - 0000001035]        ACPI SLIT ==> [0000001000 - 0000001035]
  #9 [0000009000 - 0000009440]       MEMNODEMAP ==> [0000009000 - 0000009440]
Bootmem setup node 1 0000004080000000-0000008080000000
  NODE_DATA [0000004080000000 - 0000004080033fff]
  bootmap [0000004080034000 -  0000004080833fff] pages 800
(10 early reservations) ==> bootmem [4080000000 - 8080000000]
  #0 [0000000000 - 0000001000]   BIOS data page
  #1 [0000006000 - 0000008000]       TRAMPOLINE
  #2 [0001000000 - 0001c9eff8]    TEXT DATA BSS
  #3 [0059993000 - 005a66ee82]          RAMDISK
  #4 [000009cc00 - 0000100000]    BIOS reserved
  #5 [0001c9f000 - 0001c9f508]              BRK
  #6 [0000008000 - 0000009000]          PGTABLE
  #7 [0000100000 - 0000500000]          PGTABLE
  #8 [0000001000 - 0000001035]        ACPI SLIT
  #9 [0000009000 - 0000009440]       MEMNODEMAP
Bootmem setup node 2 0000008080000000-0000010080000000
  NODE_DATA [0000008080000000 - 0000008080033fff]
  bootmap [0000008080034000 -  0000008081033fff] pages 1000
(10 early reservations) ==> bootmem [8080000000 - 10080000000]
  #0 [0000000000 - 0000001000]   BIOS data page
  #1 [0000006000 - 0000008000]       TRAMPOLINE
  #2 [0001000000 - 0001c9eff8]    TEXT DATA BSS
  #3 [0059993000 - 005a66ee82]          RAMDISK
  #4 [000009cc00 - 0000100000]    BIOS reserved
  #5 [0001c9f000 - 0001c9f508]              BRK
  #6 [0000008000 - 0000009000]          PGTABLE
  #7 [0000100000 - 0000500000]          PGTABLE
  #8 [0000001000 - 0000001035]        ACPI SLIT
  #9 [0000009000 - 0000009440]       MEMNODEMAP
found SMP MP-table at [ffff88000009d140] 9d140
Reserving 129MB of memory at 32MB for crashkernel (System RAM: 1050624MB)
 [ffffea0000000000-ffffea0032dfffff] PMD -> [ffff880028600000-ffff8800597fffff] on node 0
 [ffffea0032e00000-ffffea003f3fffff] PMD -> [ffff88005ac00000-ffff8800671fffff] on node 0
 [ffffea003f400000-ffffea003fffffff] PMD -> [ffff880067600000-ffff8800681fffff] on node 0
 [ffffea0040000000-ffffea00549fffff] PMD -> [ffff880068400000-ffff88007cdfffff] on node 0
 [ffffea0054a00000-ffffea0054ffffff] PMD -> [ffff88007d000000-ffff88007d5fffff] on node 0
 [ffffea0055000000-ffffea00551fffff] PMD -> [ffff88007da00000-ffff88007dbfffff] on node 0
 [ffffea0055200000-ffffea00557fffff] PMD -> [ffff88007de00000-ffff88007e3fffff] on node 0
 [ffffea0055800000-ffffea00567fffff] PMD -> [ffff88007e800000-ffff88007f7fffff] on node 0
 [ffffea0056800000-ffffea007fffffff] PMD -> [ffff880100000000-ffff8801297fffff] on node 0
 [ffffea0080000000-ffffea00bfffffff] PMD -> [ffff880129a00000-ffff8801699fffff] on node 0
 [ffffea00c0000000-ffffea00e1bfffff] PMD -> [ffff880169c00000-ffff88018b7fffff] on node 0
 [ffffea00e1c00000-ffffea00ffffffff] PMD -> [ffff884080a00000-ffff88409edfffff] on node 1
 [ffffea0100000000-ffffea013fffffff] PMD -> [ffff88409f000000-ffff8840deffffff] on node 1
 [ffffea0140000000-ffffea017fffffff] PMD -> [ffff8840df200000-ffff88411f1fffff] on node 1
 [ffffea0180000000-ffffea01bfffffff] PMD -> [ffff88411f400000-ffff88415f3fffff] on node 1
 [ffffea01c0000000-ffffea01c1bfffff] PMD -> [ffff88415f600000-ffff8841611fffff] on node 1
 [ffffea01c1c00000-ffffea01ffffffff] PMD -> [ffff888081200000-ffff8880bf5fffff] on node 2
 [ffffea0200000000-ffffea023fffffff] PMD -> [ffff8880bf800000-ffff8880ff7fffff] on node 2
 [ffffea0240000000-ffffea027fffffff] PMD -> [ffff8880ffa00000-ffff88813f9fffff] on node 2
 [ffffea0280000000-ffffea02bfffffff] PMD -> [ffff88813fc00000-ffff88817fbfffff] on node 2
 [ffffea02c0000000-ffffea02ffffffff] PMD -> [ffff88817fe00000-ffff8881bfdfffff] on node 2
 [ffffea0300000000-ffffea033fffffff] PMD -> [ffff8881c0000000-ffff8881ffffffff] on node 2
 [ffffea0340000000-ffffea037fffffff] PMD -> [ffff888200200000-ffff8882401fffff] on node 2
 [ffffea0380000000-ffffea0381bfffff] PMD -> [ffff888240400000-ffff888241ffffff] on node 2
Zone PFN ranges:
  DMA      0x00000001 -> 0x00001000
  DMA32    0x00001000 -> 0x00100000
  Normal   0x00100000 -> 0x10080000
Movable zone start PFN for each node
early_node_map[19] active PFN ranges
    0: 0x00000001 -> 0x0000009d
    0: 0x00000100 -> 0x0005a68f
    0: 0x0005a6bc -> 0x0005a6ff
    0: 0x0005a702 -> 0x0005a703
    0: 0x0005ab03 -> 0x00067371
    0: 0x000673d2 -> 0x00067401
    0: 0x0006740f -> 0x0006749b
    0: 0x000674ac -> 0x000674c0
    0: 0x000674e0 -> 0x00067573
    0: 0x00067574 -> 0x0007cf2b
    0: 0x0007cf2f -> 0x0007cf30
    0: 0x0007cf31 -> 0x0007d777
    0: 0x0007d83b -> 0x0007dcaf
    0: 0x0007dd5f -> 0x0007e404
    0: 0x0007e405 -> 0x0007e76b
    0: 0x0007e76c -> 0x0007f800
    0: 0x00100000 -> 0x04080000
    1: 0x04080000 -> 0x08080000
    2: 0x08080000 -> 0x10080000
On node 0 totalpages: 67105104
  DMA zone: 56 pages used for memmap
  DMA zone: 1127 pages reserved
  DMA zone: 2813 pages, LIFO batch:0
  DMA32 zone: 14280 pages used for memmap
  DMA32 zone: 502252 pages, LIFO batch:31
  Normal zone: 910336 pages used for memmap
  Normal zone: 65674240 pages, LIFO batch:31
On node 1 totalpages: 67108864
  Normal zone: 917504 pages used for memmap
  Normal zone: 66191360 pages, LIFO batch:31
On node 2 totalpages: 134217728
  Normal zone: 1835008 pages used for memmap
  Normal zone: 132382720 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x588
ACPI: Local APIC address 0xfee00000
system APIC only can use physical flat
Setting APIC routing to physical flat.
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x06] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x10] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x12] enabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x14] enabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x16] enabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x20] enabled)
ACPI: LAPIC (acpi_id[0x09] lapic_id[0x22] enabled)
ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x24] enabled)
ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x26] enabled)
ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x30] enabled)
ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x32] enabled)
ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x34] enabled)
ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x36] enabled)
ACPI: LAPIC (acpi_id[0x40] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x41] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x42] lapic_id[0x05] enabled)
ACPI: LAPIC (acpi_id[0x43] lapic_id[0x07] enabled)
ACPI: LAPIC (acpi_id[0x44] lapic_id[0x11] enabled)
ACPI: LAPIC (acpi_id[0x45] lapic_id[0x13] enabled)
ACPI: LAPIC (acpi_id[0x46] lapic_id[0x15] enabled)
ACPI: LAPIC (acpi_id[0x47] lapic_id[0x17] enabled)
ACPI: LAPIC (acpi_id[0x48] lapic_id[0x21] enabled)
ACPI: LAPIC (acpi_id[0x49] lapic_id[0x23] enabled)
ACPI: LAPIC (acpi_id[0x4a] lapic_id[0x25] enabled)
ACPI: LAPIC (acpi_id[0x4b] lapic_id[0x27] enabled)
ACPI: LAPIC (acpi_id[0x4c] lapic_id[0x31] enabled)
ACPI: LAPIC (acpi_id[0x4d] lapic_id[0x33] enabled)
ACPI: LAPIC (acpi_id[0x4e] lapic_id[0x35] enabled)
ACPI: LAPIC (acpi_id[0x4f] lapic_id[0x37] enabled)
ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
ACPI: IOAPIC (id[0x0e] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 14, version 32, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x0d] address[0xfec01000] gsi_base[24])
IOAPIC[1]: apic_id 13, version 32, address 0xfec01000, GSI 24-47
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a301 base: 0xfed00000
SMP: Allowing 32 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 48
PM: Registered nosave memory: 000000000009d000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
PM: Registered nosave memory: 000000005a68f000 - 000000005a6b3000
PM: Registered nosave memory: 000000005a6b3000 - 000000005a6b4000
PM: Registered nosave memory: 000000005a6b4000 - 000000005a6b5000
PM: Registered nosave memory: 000000005a6b5000 - 000000005a6bc000
PM: Registered nosave memory: 000000005a6ff000 - 000000005a702000
PM: Registered nosave memory: 000000005a703000 - 000000005ab03000
PM: Registered nosave memory: 0000000067371000 - 00000000673d2000
PM: Registered nosave memory: 0000000067401000 - 000000006740f000
PM: Registered nosave memory: 000000006749b000 - 000000006749c000
PM: Registered nosave memory: 000000006749c000 - 00000000674ac000
PM: Registered nosave memory: 00000000674c0000 - 00000000674e0000
PM: Registered nosave memory: 0000000067573000 - 0000000067574000
PM: Registered nosave memory: 000000007cf2b000 - 000000007cf2e000
PM: Registered nosave memory: 000000007cf2e000 - 000000007cf2f000
PM: Registered nosave memory: 000000007cf30000 - 000000007cf31000
PM: Registered nosave memory: 000000007d777000 - 000000007d83b000
PM: Registered nosave memory: 000000007dcaf000 - 000000007dd5f000
PM: Registered nosave memory: 000000007e404000 - 000000007e405000
PM: Registered nosave memory: 000000007e76b000 - 000000007e76c000
PM: Registered nosave memory: 000000007f800000 - 0000000090000000
PM: Registered nosave memory: 0000000090000000 - 00000000fc000000
PM: Registered nosave memory: 00000000fc000000 - 00000000fd000000
PM: Registered nosave memory: 00000000fd000000 - 00000000fed1c000
PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000
PM: Registered nosave memory: 00000000fed20000 - 00000000ff800000
PM: Registered nosave memory: 00000000ff800000 - 0000000100000000
Allocating PCI resources starting at 90000000 (gap: 90000000:6c000000)
Booting paravirtualized kernel on bare hardware
NR_CPUS:4096 nr_cpumask_bits:32 nr_cpu_ids:32 nr_node_ids:3
PERCPU: Embedded 31 pages/cpu @ffff880028200000 s95064 r8192 d23720 u131072
pcpu-alloc: s95064 r8192 d23720 u131072 alloc=1*2097152
pcpu-alloc: [0] 00 01 02 03 04 05 06 07 16 17 18 19 20 21 22 23 
pcpu-alloc: [1] 08 09 10 11 12 13 14 15 24 25 26 27 28 29 30 31 
Built 3 zonelists in Zone order, mobility grouping on.  Total pages: 264753385
Policy zone: Normal
Kernel command line: initrd=vm-host/initramfs-2.6.32-71.el6.x86_64.img ro root=UUID=d6b66a1e-9a14-4b69-bb24-f16c774054f1 rd_NO_LUKS rd_NO_LVM rd_NO_MD rd_NO_DM LANG=en_US.UTF-8 SYSFONT=latarcyrheb-sun16 KEYBOARDTYPE=pc KEYTABLE=us crashkernel=129M@0M intel_iommu=on iommu=pt BOOT_IMAGE=vm-host/vmlinuz-2.6.32-71.el6.x86_64 
Intel-IOMMU: enabled
PID hash table entries: 4096 (order: 3, 32768 bytes)
Checking aperture...
No AGP bridge found
Queued invalidation will be enabled to support x2apic and Intr-remapping.
Memory: 1058878396k/1075838976k available (4935k kernel code, 2112192k absent, 14848388k reserved, 3927k data, 1220k init)
Hierarchical RCU implementation.
NR_IRQS:33024 nr_irqs:1072
Extended CMOS year: 2000
Console: colour VGA+ 80x25
console [tty0] enabled
allocated 10737418240 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
HPET: 4 timers in total, 0 timers will be used for per-cpu timer
Fast TSC calibration using PIT
Detected 2267.088 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 4534.17 BogoMIPS (lpj=2267088)
pid_max: default: 32768 minimum: 301
Security Framework initialized
SELinux:  Initializing.
SELinux:  Starting in permissive mode
Dentry cache hash table entries: 134217728 (order: 18, 1073741824 bytes)
Inode-cache hash table entries: 67108864 (order: 17, 536870912 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 22 MCE banks
CPU0: Thermal monitoring enabled (TM1)
using mwait in idle threads.
Performance Events: PEBS fmt1+, Nehalem events, Intel PMU driver.
... version:                3
... bit width:              48
... generic registers:      4
... value mask:             0000ffffffffffff
... max period:             000000007fffffff
... fixed-purpose events:   3
... event mask:             000000070000000f
ACPI: Core revision 20090903
ftrace: converting mcount calls to 0f 1f 44 00 00
ftrace: allocating 20276 entries in 80 pages
DMAR: Host address width 48
DMAR: DRHD base: 0x000000fed18000 flags: 0x1
IOMMU fed18000: ver 1:0 cap c90780106f0462 ecap f020fe
DMAR: RMRR base: 0x0000007dcd0000 end: 0x0000007dd4ffff
DMAR: ATSR flags: 0x0
DMAR: RHSA base: 0x000000fed18000 proximity domain: 0x0
IOAPIC id 14 under DRHD base 0xfed18000
IOAPIC id 13 under DRHD base 0xfed18000
Enabled Interrupt-remapping
Enabling x2apic
Enabled x2apic
Setting APIC routing to cluster x2apic
  alloc irq_desc for 48 on node 0
  alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Xeon(R) CPU           X7560  @ 2.27GHz stepping 06
Booting Node   0, Processors  #1 #2 #3 #4 #5 #6 #7 Ok.
Booting Node   1, Processors  #8 #9 #10 #11 #12 #13 #14 #15 Ok.
Booting Node   0, Processors  #16 #17 #18 #19 #20 #21 #22 #23 Ok.
Booting Node   1, Processors  #24 #25 #26 #27 #28 #29 #30 #31 Ok.
Brought up 32 CPUs
Total of 32 processors activated (145048.25 BogoMIPS).
Testing NMI watchdog ... OK.
sizeof(vma)=200 bytes
sizeof(page)=56 bytes
sizeof(inode)=592 bytes
sizeof(dentry)=192 bytes
sizeof(ext3inode)=800 bytes
sizeof(buffer_head)=104 bytes
sizeof(skbuff)=232 bytes
sizeof(task_struct)=2600 bytes
devtmpfs: initialized
regulator: core version 0.5
NET: Registered protocol family 16
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type pci registered
PCI: MCFG configuration 0: base 80000000 segment 0 buses 0 - 255
PCI: MCFG area at 80000000 reserved in E820
PCI: Using MMCONFIG at 80000000 - 8fffffff
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: PME# disabled
pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
pci 0000:00:03.0: PME# disabled
pci 0000:00:05.0: PME# supported from D0 D3hot D3cold
pci 0000:00:05.0: PME# disabled
pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
pci 0000:00:07.0: PME# disabled
pci 0000:00:09.0: PME# supported from D0 D3hot D3cold
pci 0000:00:09.0: PME# disabled
pci 0000:00:16.0: reg 10 64bit mmio: [0x98000000-0x98003fff]
pci 0000:00:16.1: reg 10 64bit mmio: [0x98004000-0x98007fff]
pci 0000:00:16.2: reg 10 64bit mmio: [0x98008000-0x9800bfff]
pci 0000:00:16.3: reg 10 64bit mmio: [0x9800c000-0x9800ffff]
pci 0000:00:16.4: reg 10 64bit mmio: [0x98010000-0x98013fff]
pci 0000:00:16.5: reg 10 64bit mmio: [0x98014000-0x98017fff]
pci 0000:00:16.6: reg 10 64bit mmio: [0x98018000-0x9801bfff]
pci 0000:00:16.7: reg 10 64bit mmio: [0x9801c000-0x9801ffff]
pci 0000:00:1a.0: reg 20 io port: [0x30c0-0x30df]
pci 0000:00:1a.1: reg 20 io port: [0x30a0-0x30bf]
pci 0000:00:1a.2: reg 20 io port: [0x3080-0x309f]
pci 0000:00:1a.7: reg 10 32bit mmio: [0x98021000-0x980213ff]
pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.7: PME# disabled
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: PME# disabled
pci 0000:00:1d.0: reg 20 io port: [0x3060-0x307f]
pci 0000:00:1d.1: reg 20 io port: [0x3040-0x305f]
pci 0000:00:1d.2: reg 20 io port: [0x3020-0x303f]
pci 0000:00:1d.7: reg 10 32bit mmio: [0x98020000-0x980203ff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: PME# disabled
pci 0000:00:1f.2: reg 10 io port: [0x00-0x07]
pci 0000:00:1f.2: reg 14 io port: [0x00-0x03]
pci 0000:00:1f.2: reg 18 io port: [0x00-0x07]
pci 0000:00:1f.2: reg 1c io port: [0x00-0x03]
pci 0000:00:1f.2: reg 20 io port: [0x30f0-0x30ff]
pci 0000:00:1f.2: reg 24 io port: [0x30e0-0x30ef]
pci 0000:00:1f.3: reg 10 64bit mmio: [0x98022000-0x980220ff]
pci 0000:00:1f.3: reg 20 io port: [0x3000-0x301f]
pci 0000:09:00.0: reg 10 io port: [0x2200-0x22ff]
pci 0000:09:00.0: reg 14 64bit mmio: [0x97f00000-0x97f03fff]
pci 0000:09:00.0: reg 30 32bit mmio pref: [0xfffc0000-0xffffffff]
pci 0000:09:00.1: reg 10 io port: [0x2000-0x20ff]
pci 0000:09:00.1: reg 14 64bit mmio: [0x97f04000-0x97f07fff]
pci 0000:09:00.1: reg 30 32bit mmio pref: [0xfffc0000-0xffffffff]
pci 0000:09:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
pci 0000:00:03.0: bridge io port: [0x2000-0x2fff]
pci 0000:00:03.0: bridge 32bit mmio: [0x97f00000-0x97ffffff]
pci 0000:13:00.0: reg 10 64bit mmio pref: [0x97900000-0x9797ffff]
pci 0000:13:00.0: reg 18 io port: [0x1020-0x103f]
pci 0000:13:00.0: reg 20 64bit mmio pref: [0x97a00000-0x97a03fff]
pci 0000:13:00.0: PME# supported from D0 D3hot
pci 0000:13:00.0: PME# disabled
pci 0000:13:00.0: reg 184 64bit mmio: [0x97b00000-0x97b03fff]
pci 0000:13:00.0: reg 190 64bit mmio: [0x97c00000-0x97c03fff]
pci 0000:13:00.1: reg 10 64bit mmio pref: [0x97980000-0x979fffff]
pci 0000:13:00.1: reg 18 io port: [0x1000-0x101f]
pci 0000:13:00.1: reg 20 64bit mmio pref: [0x97a04000-0x97a07fff]
pci 0000:13:00.1: PME# supported from D0 D3hot
pci 0000:13:00.1: PME# disabled
pci 0000:13:00.1: reg 184 64bit mmio: [0x97d00000-0x97d03fff]
pci 0000:13:00.1: reg 190 64bit mmio: [0x97e00000-0x97e03fff]
pci 0000:00:07.0: bridge io port: [0x1000-0x1fff]
pci 0000:00:07.0: bridge 32bit mmio: [0x97b00000-0x97efffff]
pci 0000:00:07.0: bridge 64bit mmio pref: [0x97900000-0x97afffff]
pci 0000:01:00.0: reg 10 64bit mmio: [0x92000000-0x93ffffff]
pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
pci 0000:01:00.0: PME# disabled
pci 0000:01:00.1: reg 10 64bit mmio: [0x94000000-0x95ffffff]
pci 0000:01:00.1: PME# supported from D0 D3hot D3cold
pci 0000:01:00.1: PME# disabled
pci 0000:00:1c.0: bridge 32bit mmio: [0x92000000-0x95ffffff]
pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
pci 0000:02:00.0: PME# disabled
pci 0000:00:1c.4: bridge 32bit mmio: [0x97000000-0x978fffff]
pci 0000:00:1c.4: bridge 64bit mmio pref: [0x96000000-0x96ffffff]
pci 0000:03:00.0: reg 10 32bit mmio pref: [0x96000000-0x96ffffff]
pci 0000:03:00.0: reg 14 32bit mmio: [0x97800000-0x97803fff]
pci 0000:03:00.0: reg 18 32bit mmio: [0x97000000-0x977fffff]
pci 0000:02:00.0: bridge 32bit mmio: [0x97000000-0x978fffff]
pci 0000:02:00.0: bridge 32bit mmio pref: [0x96000000-0x96ffffff]
pci 0000:00:1e.0: transparent bridge
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
Firmware did not grant requested _OSC control
Unable to assume PCIe control: Disabling ASPM
vgaarb: device added: PCI:0000:03:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: old code would have set cacheline size to 32 bytes, but clflush_size = 64
PCI: pci_cache_line_size set to 64 bytes
NetLabel: Initializing
NetLabel:  domain hash size = 128
NetLabel:  protocols = UNLABELED CIPSOv4
NetLabel:  unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
hpet0: 4 comparators, 64-bit 14.318180 MHz counter
Switching to clocksource tsc
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 13 devices
ACPI: ACPI bus type pnp unregistered
system 00:02: ioport range 0x2f8-0x2ff has been reserved
system 00:08: iomem range 0xfed00000-0xfed003ff has been reserved
system 00:09: ioport range 0x400-0x43f has been reserved
system 00:09: ioport range 0x440-0x45f has been reserved
system 00:09: ioport range 0x460-0x47f has been reserved
system 00:09: ioport range 0x580-0x5ff has been reserved
system 00:09: ioport range 0x5e0-0x5ff has been reserved
system 00:09: ioport range 0xcf9-0xcf9 could not be reserved
system 00:0a: ioport range 0xca2-0xca2 has been reserved
system 00:0a: ioport range 0xca3-0xca3 has been reserved
system 00:0b: ioport range 0xca0-0xca1 has been reserved
system 00:0b: ioport range 0xca4-0xca9 has been reserved
system 00:0b: ioport range 0xcaa-0xcab has been reserved
system 00:0b: ioport range 0xcac-0xcaf has been reserved
system 00:0b: ioport range 0xcc0-0xccb has been reserved
system 00:0c: ioport range 0xcb0-0xcbf has been reserved
pci 0000:09:00.0: BAR 6: no parent found for of device [0xfffc0000-0xffffffff]
pci 0000:09:00.1: BAR 6: no parent found for of device [0xfffc0000-0xffffffff]
pci 0000:00:01.0: PCI bridge to [bus 04-08]
pci 0000:00:01.0: PCI bridge, secondary bus 0000:04
pci 0000:00:01.0:   bridge window [io  disabled]
pci 0000:00:01.0:   bridge window [mem disabled]
pci 0000:00:01.0:   bridge window [mem pref disabled]
pci 0000:00:03.0: PCI bridge to [bus 09-0d]
pci 0000:00:03.0: PCI bridge, secondary bus 0000:09
pci 0000:00:03.0:   bridge window [0x2000-0x2fff]
pci 0000:00:03.0:   bridge window [0x97f00000-0x97ffffff]
pci 0000:00:03.0:   bridge window [0x90000000-0x900fffff]
pci 0000:00:05.0: PCI bridge to [bus 0e-12]
pci 0000:00:05.0: PCI bridge, secondary bus 0000:0e
pci 0000:00:05.0:   bridge window [io  disabled]
pci 0000:00:05.0:   bridge window [mem disabled]
pci 0000:00:05.0:   bridge window [mem pref disabled]
pci 0000:13:00.0: reg 184 64bit mmio: [0x97b00000-0x97b03fff]
pci 0000:13:00.0: reg 190 64bit mmio: [0x97c00000-0x97c03fff]
pci 0000:13:00.0: reg 184 64bit mmio: [0x97b00000-0x97b03fff]
pci 0000:13:00.1: reg 184 64bit mmio: [0x97d00000-0x97d03fff]
pci 0000:13:00.0: reg 184 64bit mmio: [0x97b00000-0x97b03fff]
pci 0000:13:00.0: reg 190 64bit mmio: [0x97c00000-0x97c03fff]
pci 0000:13:00.1: reg 190 64bit mmio: [0x97e00000-0x97e03fff]
pci 0000:13:00.0: reg 184 64bit mmio: [0x97b00000-0x97b03fff]
pci 0000:13:00.0: reg 190 64bit mmio: [0x97c00000-0x97c03fff]
pci 0000:13:00.1: reg 184 64bit mmio: [0x97d00000-0x97d03fff]
pci 0000:13:00.0: reg 184 64bit mmio: [0x97b00000-0x97b03fff]
pci 0000:13:00.0: reg 184 64bit mmio: [0x97b00000-0x97b03fff]
pci 0000:13:00.0: reg 190 64bit mmio: [0x97c00000-0x97c03fff]
pci 0000:13:00.0: reg 190 64bit mmio: [0x97c00000-0x97c03fff]
pci 0000:13:00.1: reg 184 64bit mmio: [0x97d00000-0x97d03fff]
pci 0000:13:00.1: reg 184 64bit mmio: [0x97d00000-0x97d03fff]
pci 0000:13:00.1: reg 190 64bit mmio: [0x97e00000-0x97e03fff]
pci 0000:13:00.1: reg 190 64bit mmio: [0x97e00000-0x97e03fff]
pci 0000:00:07.0: PCI bridge to [bus 13-17]
pci 0000:00:07.0: PCI bridge, secondary bus 0000:13
pci 0000:00:07.0:   bridge window [0x1000-0x1fff]
pci 0000:00:07.0:   bridge window [0x97b00000-0x97efffff]
pci 0000:00:07.0:   bridge window [0x97900000-0x97afffff]
pci 0000:00:09.0: PCI bridge to [bus 18-1c]
pci 0000:00:09.0: PCI bridge, secondary bus 0000:18
pci 0000:00:09.0:   bridge window [io  disabled]
pci 0000:00:09.0:   bridge window [mem disabled]
pci 0000:00:09.0:   bridge window [mem pref disabled]
pci 0000:00:1c.0: PCI bridge to [bus 01-01]
pci 0000:00:1c.0: PCI bridge, secondary bus 0000:01
pci 0000:00:1c.0:   bridge window [0x4000-0x4fff]
pci 0000:00:1c.0:   bridge window [0x92000000-0x95ffffff]
pci 0000:00:1c.0:   bridge window [0x90100000-0x902fffff]
pci 0000:02:00.0: PCI bridge to [bus 03-03]
pci 0000:02:00.0: PCI bridge, secondary bus 0000:03
pci 0000:02:00.0:   bridge window [io  disabled]
pci 0000:02:00.0:   bridge window [0x97000000-0x978fffff]
pci 0000:02:00.0:   bridge window [0x96000000-0x96ffffff]
pci 0000:00:1c.4: PCI bridge to [bus 02-03]
pci 0000:00:1c.4: PCI bridge, secondary bus 0000:02
pci 0000:00:1c.4:   bridge window [io  disabled]
pci 0000:00:1c.4:   bridge window [0x97000000-0x978fffff]
pci 0000:00:1c.4:   bridge window [0x96000000-0x96ffffff]
pci 0000:00:1e.0: PCI bridge to [bus 1d-1d]
pci 0000:00:1e.0: PCI bridge, secondary bus 0000:1d
pci 0000:00:1e.0:   bridge window [io  disabled]
pci 0000:00:1e.0:   bridge window [mem disabled]
pci 0000:00:1e.0:   bridge window [mem pref disabled]
  alloc irq_desc for 28 on node -1
  alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
pci 0000:00:01.0: PCI INT A -> GSI 28 (level, low) -> IRQ 28
pci 0000:00:01.0: setting latency timer to 64
  alloc irq_desc for 24 on node -1
  alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
pci 0000:00:03.0: PCI INT A -> GSI 24 (level, low) -> IRQ 24
pci 0000:00:03.0: setting latency timer to 64
  alloc irq_desc for 26 on node -1
  alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
pci 0000:00:05.0: PCI INT A -> GSI 26 (level, low) -> IRQ 26
pci 0000:00:05.0: setting latency timer to 64
  alloc irq_desc for 30 on node -1
  alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
pci 0000:00:07.0: PCI INT A -> GSI 30 (level, low) -> IRQ 30
pci 0000:00:07.0: setting latency timer to 64
  alloc irq_desc for 32 on node -1
  alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
pci 0000:00:09.0: PCI INT A -> GSI 32 (level, low) -> IRQ 32
pci 0000:00:09.0: setting latency timer to 64
  alloc irq_desc for 16 on node -1
  alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.0: setting latency timer to 64
pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.4: setting latency timer to 64
pci 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:02:00.0: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
pci_bus 0000:09: resource 0 io:  [0x2000-0x2fff]
pci_bus 0000:09: resource 1 mem: [0x97f00000-0x97ffffff]
pci_bus 0000:09: resource 2 pref mem [0x90000000-0x900fffff]
pci_bus 0000:13: resource 0 io:  [0x1000-0x1fff]
pci_bus 0000:13: resource 1 mem: [0x97b00000-0x97efffff]
pci_bus 0000:13: resource 2 pref mem [0x97900000-0x97afffff]
pci_bus 0000:01: resource 0 io:  [0x4000-0x4fff]
pci_bus 0000:01: resource 1 mem: [0x92000000-0x95ffffff]
pci_bus 0000:01: resource 2 pref mem [0x90100000-0x902fffff]
pci_bus 0000:02: resource 1 mem: [0x97000000-0x978fffff]
pci_bus 0000:02: resource 2 pref mem [0x96000000-0x96ffffff]
pci_bus 0000:03: resource 1 mem: [0x97000000-0x978fffff]
pci_bus 0000:03: resource 2 pref mem [0x96000000-0x96ffffff]
pci_bus 0000:1d: resource 3 io:  [0x00-0xffff]
pci_bus 0000:1d: resource 4 mem: [0x000000-0xffffffffffffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 524288 (order: 10, 4194304 bytes)
TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP reno registered
NET: Registered protocol family 1
pci 0000:03:00.0: Boot video device
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 13167k freed
IOMMU 0xfed18000: using Queued invalidation
IOMMU: hardware identity mapping for device 0000:00:00.0
IOMMU: hardware identity mapping for device 0000:00:01.0
IOMMU: hardware identity mapping for device 0000:00:03.0
IOMMU: hardware identity mapping for device 0000:00:05.0
IOMMU: hardware identity mapping for device 0000:00:07.0
IOMMU: hardware identity mapping for device 0000:00:09.0
IOMMU: hardware identity mapping for device 0000:00:10.0
IOMMU: hardware identity mapping for device 0000:00:10.1
IOMMU: hardware identity mapping for device 0000:00:11.0
IOMMU: hardware identity mapping for device 0000:00:11.1
IOMMU: hardware identity mapping for device 0000:00:14.0
IOMMU: hardware identity mapping for device 0000:00:14.1
IOMMU: hardware identity mapping for device 0000:00:14.2
IOMMU: hardware identity mapping for device 0000:00:16.0
IOMMU: hardware identity mapping for device 0000:00:16.1
IOMMU: hardware identity mapping for device 0000:00:16.2
IOMMU: hardware identity mapping for device 0000:00:16.3
IOMMU: hardware identity mapping for device 0000:00:16.4
IOMMU: hardware identity mapping for device 0000:00:16.5
IOMMU: hardware identity mapping for device 0000:00:16.6
IOMMU: hardware identity mapping for device 0000:00:16.7
IOMMU: hardware identity mapping for device 0000:00:1a.0
IOMMU: hardware identity mapping for device 0000:00:1a.1
IOMMU: hardware identity mapping for device 0000:00:1a.2
IOMMU: hardware identity mapping for device 0000:00:1a.7
IOMMU: hardware identity mapping for device 0000:00:1c.0
IOMMU: hardware identity mapping for device 0000:00:1c.4
IOMMU: hardware identity mapping for device 0000:00:1d.0
IOMMU: hardware identity mapping for device 0000:00:1d.1
IOMMU: hardware identity mapping for device 0000:00:1d.2
IOMMU: hardware identity mapping for device 0000:00:1d.7
IOMMU: hardware identity mapping for device 0000:00:1f.0
IOMMU: hardware identity mapping for device 0000:00:1f.2
IOMMU: hardware identity mapping for device 0000:00:1f.3
IOMMU: hardware identity mapping for device 0000:09:00.0
IOMMU: hardware identity mapping for device 0000:09:00.1
IOMMU: hardware identity mapping for device 0000:13:00.0
IOMMU: hardware identity mapping for device 0000:13:00.1
IOMMU: hardware identity mapping for device 0000:01:00.0
IOMMU: hardware identity mapping for device 0000:01:00.1
IOMMU: Setting RMRR:
Ignoring identity map for HW passthrough device 0000:00:1d.0 [0x7dcd0000 - 0x7dd50000]
Ignoring identity map for HW passthrough device 0000:00:1d.1 [0x7dcd0000 - 0x7dd50000]
Ignoring identity map for HW passthrough device 0000:00:1d.2 [0x7dcd0000 - 0x7dd50000]
Ignoring identity map for HW passthrough device 0000:00:1d.7 [0x7dcd0000 - 0x7dd50000]
Ignoring identity map for HW passthrough device 0000:00:1a.0 [0x7dcd0000 - 0x7dd50000]
Ignoring identity map for HW passthrough device 0000:00:1a.1 [0x7dcd0000 - 0x7dd50000]
Ignoring identity map for HW passthrough device 0000:00:1a.2 [0x7dcd0000 - 0x7dd50000]
Ignoring identity map for HW passthrough device 0000:00:1a.7 [0x7dcd0000 - 0x7dd50000]
IOMMU: Prepare 0-16MiB unity mapping for LPC
Ignoring identity map for HW passthrough device 0000:00:1f.0 [0x0 - 0x1000000]
PCI-DMA: Intel(R) Virtualization Technology for Directed I/O
audit: initializing netlink socket (disabled)
type=2000 audit(1290182644.023:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 32768
SELinux:  Registering netfilter hooks
alg: No test for stdrng (krng)
ksign: Installing public key data
Loading keyring
- Added public key 9D480283FFC05098
- User ID: Red Hat, Inc. (Kernel Module GPG key)
- Added public key D4A26C9CCD09BEDA
- User ID: Red Hat Enterprise Linux Driver Update Program <secalert@redhat.com>
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
  alloc irq_desc for 49 on node -1
  alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
pcieport 0000:00:01.0: irq 49 for MSI/MSI-X
pcieport 0000:00:01.0: setting latency timer to 64
32bit 0000:00:01.0 uses non-identity mapping
  alloc irq_desc for 50 on node -1
  alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
pcieport 0000:00:03.0: irq 50 for MSI/MSI-X
pcieport 0000:00:03.0: setting latency timer to 64
32bit 0000:00:03.0 uses non-identity mapping
  alloc irq_desc for 51 on node -1
  alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
pcieport 0000:00:05.0: irq 51 for MSI/MSI-X
pcieport 0000:00:05.0: setting latency timer to 64
32bit 0000:00:05.0 uses non-identity mapping
  alloc irq_desc for 52 on node -1
  alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
pcieport 0000:00:07.0: irq 52 for MSI/MSI-X
pcieport 0000:00:07.0: setting latency timer to 64
32bit 0000:00:07.0 uses non-identity mapping
  alloc irq_desc for 53 on node -1
  alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
pcieport 0000:00:09.0: irq 53 for MSI/MSI-X
pcieport 0000:00:09.0: setting latency timer to 64
32bit 0000:00:09.0 uses non-identity mapping
  alloc irq_desc for 54 on node -1
  alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
pcieport 0000:00:1c.0: irq 54 for MSI/MSI-X
pcieport 0000:00:1c.0: setting latency timer to 64
32bit 0000:00:1c.0 uses non-identity mapping
  alloc irq_desc for 55 on node -1
  alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
pcieport 0000:00:1c.4: irq 55 for MSI/MSI-X
pcieport 0000:00:1c.4: setting latency timer to 64
32bit 0000:00:1c.4 uses non-identity mapping
Firmware did not grant requested _OSC control
aer 0000:00:01.0:pcie02: AER service couldn't init device: no _OSC support
Firmware did not grant requested _OSC control
aer 0000:00:03.0:pcie02: AER service couldn't init device: no _OSC support
Firmware did not grant requested _OSC control
aer 0000:00:05.0:pcie02: AER service couldn't init device: no _OSC support
Firmware did not grant requested _OSC control
aer 0000:00:07.0:pcie02: AER service couldn't init device: no _OSC support
Firmware did not grant requested _OSC control
aer 0000:00:09.0:pcie02: AER service couldn't init device: no _OSC support
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
Firmware did not grant requested _OSC control
Firmware did not grant requested _OSC control
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
pci-stub: invalid id string ""
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
ACPI: Power Button [PWRF]
Monitor-Mwait will be used to enter C-1 state
Monitor-Mwait will be used to enter C-3 state
processor LNXCPU:00: registered as cooling_device0
processor LNXCPU:01: registered as cooling_device1
processor LNXCPU:02: registered as cooling_device2
processor LNXCPU:03: registered as cooling_device3
processor LNXCPU:04: registered as cooling_device4
processor LNXCPU:05: registered as cooling_device5
processor LNXCPU:06: registered as cooling_device6
processor LNXCPU:07: registered as cooling_device7
processor LNXCPU:08: registered as cooling_device8
processor LNXCPU:09: registered as cooling_device9
processor LNXCPU:0a: registered as cooling_device10
processor LNXCPU:0b: registered as cooling_device11
processor LNXCPU:0c: registered as cooling_device12
processor LNXCPU:0d: registered as cooling_device13
processor LNXCPU:0e: registered as cooling_device14
processor LNXCPU:0f: registered as cooling_device15
processor LNXCPU:10: registered as cooling_device16
processor LNXCPU:11: registered as cooling_device17
processor LNXCPU:12: registered as cooling_device18
processor LNXCPU:13: registered as cooling_device19
processor LNXCPU:14: registered as cooling_device20
processor LNXCPU:15: registered as cooling_device21
processor LNXCPU:16: registered as cooling_device22
processor LNXCPU:17: registered as cooling_device23
processor LNXCPU:18: registered as cooling_device24
processor LNXCPU:19: registered as cooling_device25
processor LNXCPU:1a: registered as cooling_device26
processor LNXCPU:1b: registered as cooling_device27
processor LNXCPU:1c: registered as cooling_device28
processor LNXCPU:1d: registered as cooling_device29
processor LNXCPU:1e: registered as cooling_device30
processor LNXCPU:1f: registered as cooling_device31
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
tpm_tis 00:03: 1.2 TPM (device-id 0xFE, rev-id 70)
crash memory driver: version 1.0
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
00:01: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
brd: module loaded
loop: module loaded
input: Macintosh mouse button emulation as /devices/virtual/input/input1
Fixed MDIO Bus: probed
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  alloc irq_desc for 19 on node -1
  alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 19 (level, low) -> IRQ 19
ehci_hcd 0000:00:1a.7: setting latency timer to 64
ehci_hcd 0000:00:1a.7: EHCI Host Controller
ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
32bit 0000:00:1a.7 uses non-identity mapping
ehci_hcd 0000:00:1a.7: debug port 1
ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported
ehci_hcd 0000:00:1a.7: irq 19, io mem 0x98021000
ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.32-71.el6.x86_64 ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.7
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
  alloc irq_desc for 17 on node -1
  alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 17 (level, low) -> IRQ 17
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
32bit 0000:00:1d.7 uses non-identity mapping
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
ehci_hcd 0000:00:1d.7: irq 17, io mem 0x98020000
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.32-71.el6.x86_64 ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.7
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
uhci_hcd 0000:00:1a.0: setting latency timer to 64
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1a.0: irq 17, io base 0x000030c0
32bit 0000:00:1a.0 uses non-identity mapping
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.32-71.el6.x86_64 uhci_hcd
usb usb3: SerialNumber: 0000:00:1a.0
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
  alloc irq_desc for 18 on node -1
  alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 18 (level, low) -> IRQ 18
uhci_hcd 0000:00:1a.1: setting latency timer to 64
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1a.1: irq 18, io base 0x000030a0
32bit 0000:00:1a.1 uses non-identity mapping
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 2.6.32-71.el6.x86_64 uhci_hcd
usb usb4: SerialNumber: 0000:00:1a.1
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 19 (level, low) -> IRQ 19
uhci_hcd 0000:00:1a.2: setting latency timer to 64
uhci_hcd 0000:00:1a.2: UHCI Host Controller
uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1a.2: irq 19, io base 0x00003080
32bit 0000:00:1a.2 uses non-identity mapping
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: UHCI Host Controller
usb usb5: Manufacturer: Linux 2.6.32-71.el6.x86_64 uhci_hcd
usb usb5: SerialNumber: 0000:00:1a.2
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.0: irq 17, io base 0x00003060
32bit 0000:00:1d.0 uses non-identity mapping
usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: UHCI Host Controller
usb usb6: Manufacturer: Linux 2.6.32-71.el6.x86_64 uhci_hcd
usb usb6: SerialNumber: 0000:00:1d.0
usb usb6: configuration #1 chosen from 1 choice
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 18 (level, low) -> IRQ 18
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
uhci_hcd 0000:00:1d.1: irq 18, io base 0x00003040
32bit 0000:00:1d.1 uses non-identity mapping
usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: UHCI Host Controller
usb usb7: Manufacturer: Linux 2.6.32-71.el6.x86_64 uhci_hcd
usb usb7: SerialNumber: 0000:00:1d.1
usb usb7: configuration #1 chosen from 1 choice
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 19 (level, low) -> IRQ 19
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
uhci_hcd 0000:00:1d.2: irq 19, io base 0x00003020
32bit 0000:00:1d.2 uses non-identity mapping
usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb8: Product: UHCI Host Controller
usb usb8: Manufacturer: Linux 2.6.32-71.el6.x86_64 uhci_hcd
usb usb8: SerialNumber: 0000:00:1d.2
usb usb8: configuration #1 chosen from 1 choice
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 2 ports detected
PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
mice: PS/2 mouse device common for all mice
rtc_cmos 00:05: RTC can wake from S4
rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
cpuidle: using governor ladder
cpuidle: using governor menu
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 17
registered taskstats version 1
rtc_cmos 00:05: setting system clock to 2010-11-19 16:04:20 UTC (1290182660)
Initalizing network drop monitor service
Freeing unused kernel memory: 1220k freed
Write protecting the kernel read-only data: 7176k
dracut: dracut-004-32.el6
dracut: rd_NO_LUKS: removing cryptoluks activation
dracut: rd_NO_LVM: removing LVM activation
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: dm-devel@redhat.com
udev: starting version 147
dracut: Starting plymouth daemon
dracut: rd_NO_DM: removing DM RAID activation
dracut: rd_NO_MD: removing MD RAID activation
usb 3-2: new low speed USB device using uhci_hcd and address 2
QLogic Fibre Channel HBA Driver: 8.03.01.05.06.0-k8
qla2xxx 0000:09:00.0: PCI INT A -> GSI 24 (level, low) -> IRQ 24
qla2xxx 0000:09:00.0: Found an ISP2432, irq 24, iobase 0xffffc90071172000
  alloc irq_desc for 56 on node -1
  alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
qla2xxx 0000:09:00.0: irq 56 for MSI/MSI-X
qla2xxx 0000:09:00.0: Configuring PCI space...
qla2xxx 0000:09:00.0: setting latency timer to 64
qla2xxx 0000:09:00.0: Configure NVRAM parameters...
qla2xxx 0000:09:00.0: Verifying loaded RISC code...
qla2xxx 0000:09:00.0: firmware: requesting ql2400_fw.bin
qla2xxx 0000:09:00.0: FW: Loading via request-firmware...
usb 3-2: New USB device found, idVendor=0624, idProduct=0296
usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-2: Product: IBM 73P5832
usb 3-2: Manufacturer: Avocent
usb 3-2: configuration #1 chosen from 1 choice
input: Avocent IBM 73P5832 as /devices/pci0000:00/0000:00:1a.0/usb3/3-2/3-2:1.0/input/input2
generic-usb 0003:0624:0296.0001: input,hidraw0: USB HID v1.10 Keyboard [Avocent IBM 73P5832] on usb-0000:00:1a.0-2/input0
input: Avocent IBM 73P5832 as /devices/pci0000:00/0000:00:1a.0/usb3/3-2/3-2:1.1/input/input3
generic-usb 0003:0624:0296.0002: input,hidraw1: USB HID v1.10 Mouse [Avocent IBM 73P5832] on usb-0000:00:1a.0-2/input1
qla2xxx 0000:09:00.0: Allocated (64 KB) for EFT...
qla2xxx 0000:09:00.0: Allocated (1285 KB) for firmware dump...
qla2xxx 0000:09:00.0: Unable to read FCP priority data.
scsi0 : qla2xxx
qla2xxx 0000:09:00.0: 
 QLogic Fibre Channel HBA Driver: 8.03.01.05.06.0-k8
  QLogic QLE2462 - QLogic 4GB FC Dual-Port PCI-E HBA for IBM System x
  ISP2432: PCIe (2.5GT/s x4) @ 0000:09:00.0 hdma+, host#=0, fw=5.03.02 (496)
  alloc irq_desc for 34 on node -1
  alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
qla2xxx 0000:09:00.1: PCI INT B -> GSI 34 (level, low) -> IRQ 34
qla2xxx 0000:09:00.1: Found an ISP2432, irq 34, iobase 0xffffc90071138000
  alloc irq_desc for 57 on node -1
  alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
qla2xxx 0000:09:00.1: irq 57 for MSI/MSI-X
qla2xxx 0000:09:00.1: Configuring PCI space...
qla2xxx 0000:09:00.1: setting latency timer to 64
qla2xxx 0000:09:00.1: Configure NVRAM parameters...
qla2xxx 0000:09:00.1: Verifying loaded RISC code...
qla2xxx 0000:09:00.1: FW: Loading via request-firmware...
usb 6-2: new full speed USB device using uhci_hcd and address 2
usb 6-2: New USB device found, idVendor=04b3, idProduct=4010
usb 6-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 6-2: Product: RNDIS/CDC ETHER
usb 6-2: Manufacturer: IBM
usb 6-2: configuration #1 chosen from 2 choices
qla2xxx 0000:09:00.0: LIP reset occurred (f7f7).
qla2xxx 0000:09:00.1: Allocated (64 KB) for EFT...
qla2xxx 0000:09:00.1: Allocated (1285 KB) for firmware dump...
qla2xxx 0000:09:00.1: Unable to read FCP priority data.
scsi1 : qla2xxx
qla2xxx 0000:09:00.1: 
 QLogic Fibre Channel HBA Driver: 8.03.01.05.06.0-k8
  QLogic QLE2462 - QLogic 4GB FC Dual-Port PCI-E HBA for IBM System x
  ISP2432: PCIe (2.5GT/s x4) @ 0000:09:00.1 hdma+, host#=1, fw=5.03.02 (496)
ata_piix 0000:00:1f.2: version 2.13
ata_piix 0000:00:1f.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
ata_piix 0000:00:1f.2: setting latency timer to 64
32bit 0000:00:1f.2 uses non-identity mapping
scsi2 : ata_piix
scsi3 : ata_piix
ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x30f0 irq 14
ata2: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x30f8 irq 15
qla2xxx 0000:09:00.1: LIP reset occurred (f7f7).
ata2.00: failed to resume link (SControl 0)
ata1.01: failed to resume link (SControl 0)
ata1.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.01: SATA link down (SStatus 0 SControl 0)
ata1.01: link offline, clearing class 3 to NONE
ata1.00: ATAPI: MATSHITADVD-RAM UJ870BJ, SA14, max UDMA/33
ata1.00: configured for UDMA/33
scsi: waiting for bus probes to complete ...
qla2xxx 0000:09:00.0: LIP occurred (f7f7).
qla2xxx 0000:09:00.0: LOOP UP detected (4 Gbps).
scsi 0:0:0:0: Direct-Access     IBM      1815      FAStT  0914 PQ: 0 ANSI: 5
scsi 0:0:0:1: Direct-Access     IBM      1815      FAStT  0914 PQ: 0 ANSI: 5
scsi 0:0:0:2: Direct-Access     IBM      1815      FAStT  0914 PQ: 0 ANSI: 5
scsi 0:0:0:3: Direct-Access     IBM      1815      FAStT  0914 PQ: 0 ANSI: 5
scsi 0:0:0:4: Direct-Access     IBM      1815      FAStT  0914 PQ: 0 ANSI: 5
scsi 0:0:0:5: Direct-Access     IBM      1815      FAStT  0914 PQ: 0 ANSI: 5
scsi 0:0:0:6: Direct-Access     IBM      1815      FAStT  0914 PQ: 0 ANSI: 5
scsi 0:0:0:7: Direct-Access     IBM      1815      FAStT  0914 PQ: 0 ANSI: 5
scsi 0:0:0:8: Direct-Access     IBM      1815      FAStT  0914 PQ: 0 ANSI: 5
ata2.01: failed to resume link (SControl 0)
ata2.00: SATA link down (SStatus 0 SControl 0)
ata2.01: SATA link down (SStatus 0 SControl 0)
qla2xxx 0000:09:00.1: LIP occurred (f7f7).
qla2xxx 0000:09:00.1: LOOP UP detected (4 Gbps).
scsi 1:0:0:0: Direct-Access     IBM      1815      FAStT  0914 PQ: 0 ANSI: 5
scsi 1:0:0:1: Direct-Access     IBM      1815      FAStT  0914 PQ: 0 ANSI: 5
scsi 1:0:0:2: Direct-Access     IBM      1815      FAStT  0914 PQ: 0 ANSI: 5
scsi 1:0:0:3: Direct-Access     IBM      1815      FAStT  0914 PQ: 0 ANSI: 5
scsi 1:0:0:4: Direct-Access     IBM      1815      FAStT  0914 PQ: 0 ANSI: 5
scsi 1:0:0:5: Direct-Access     IBM      1815      FAStT  0914 PQ: 0 ANSI: 5
scsi 1:0:0:6: Direct-Access     IBM      1815      FAStT  0914 PQ: 0 ANSI: 5
scsi 1:0:0:7: Direct-Access     IBM      1815      FAStT  0914 PQ: 0 ANSI: 5
scsi 1:0:0:8: Direct-Access     IBM      1815      FAStT  0914 PQ: 0 ANSI: 5
scsi 1:0:0:30: Direct-Access     IBM      1815      FAStT  0914 PQ: 0 ANSI: 5
scsi 1:0:0:31: Direct-Access     IBM      1815      FAStT  0914 PQ: 0 ANSI: 5
scsi 2:0:0:0: CD-ROM            MATSHITA DVD-RAM UJ870BJ  SA14 PQ: 0 ANSI: 5
sd 0:0:0:1: [sdb] 996265984 512-byte logical blocks: (510 GB/475 GiB)
sd 0:0:0:3: [sdd] 996265984 512-byte logical blocks: (510 GB/475 GiB)
sd 0:0:0:2: [sdc] 996265984 512-byte logical blocks: (510 GB/475 GiB)
sd 0:0:0:6: [sdg] 996265984 512-byte logical blocks: (510 GB/475 GiB)
sd 0:0:0:5: [sdf] 996265984 512-byte logical blocks: (510 GB/475 GiB)
sd 0:0:0:7: [sdh] 996265984 512-byte logical blocks: (510 GB/475 GiB)
sd 0:0:0:4: [sde] 996265984 512-byte logical blocks: (510 GB/475 GiB)
sd 0:0:0:8: [sdi] 996265984 512-byte logical blocks: (510 GB/475 GiB)
sd 0:0:0:0: [sda] 996265984 512-byte logical blocks: (510 GB/475 GiB)
sd 0:0:0:3: [sdd] Write Protect is off
sd 0:0:0:3: [sdd] Mode Sense: 77 00 10 08
sd 0:0:0:6: [sdg] Write Protect is off
sd 0:0:0:6: [sdg] Mode Sense: 77 00 10 08
sd 0:0:0:2: [sdc] Write Protect is off
sd 0:0:0:2: [sdc] Mode Sense: 77 00 10 08
sd 0:0:0:7: [sdh] Write Protect is off
sd 0:0:0:7: [sdh] Mode Sense: 77 00 10 08
sd 0:0:0:8: [sdi] Write Protect is off
sd 0:0:0:8: [sdi] Mode Sense: 77 00 10 08
sd 0:0:0:4: [sde] Write Protect is off
sd 0:0:0:4: [sde] Mode Sense: 77 00 10 08
sd 0:0:0:5: [sdf] Write Protect is off
sd 0:0:0:5: [sdf] Mode Sense: 77 00 10 08
sd 1:0:0:0: [sdj] 996265984 512-byte logical blocks: (510 GB/475 GiB)
sd 1:0:0:5: [sdo] 996265984 512-byte logical blocks: (510 GB/475 GiB)
sd 1:0:0:3: [sdm] 996265984 512-byte logical blocks: (510 GB/475 GiB)
sd 1:0:0:7: [sdq] 996265984 512-byte logical blocks: (510 GB/475 GiB)
sd 0:0:0:3: [sdd] Write cache: enabled, read cache: enabled, supports DPO and FUA
sd 0:0:0:6: [sdg] Write cache: enabled, read cache: enabled, supports DPO and FUA
sd 0:0:0:2: [sdc] Write cache: enabled, read cache: enabled, supports DPO and FUA
sd 1:0:0:30: [sds] 85983232 512-byte logical blocks: (44.0 GB/41.0 GiB)
sd 1:0:0:1: [sdk] 996265984 512-byte logical blocks: (510 GB/475 GiB)
sd 0:0:0:8: [sdi] Write cache: enabled, read cache: enabled, supports DPO and FUA
sd 1:0:0:2: [sdl] 996265984 512-byte logical blocks: (510 GB/475 GiB)
sd 1:0:0:8: [sdr] 996265984 512-byte logical blocks: (510 GB/475 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 77 00 10 08
sd 1:0:0:4: [sdn] 996265984 512-byte logical blocks: (510 GB/475 GiB)
sd 1:0:0:31: [sdt] 88080384 512-byte logical blocks: (45.0 GB/42.0 GiB)
sd 1:0:0:6: [sdp] 996265984 512-byte logical blocks: (510 GB/475 GiB)
sd 1:0:0:0: [sdj] Write Protect is off
sd 1:0:0:0: [sdj] Mode Sense: 77 00 10 08
sd 1:0:0:7: [sdq] Write Protect is off
sd 1:0:0:7: [sdq] Mode Sense: 77 00 10 08
sd 1:0:0:5: [sdo] Write Protect is off
sd 1:0:0:5: [sdo] Mode Sense: 77 00 10 08
sd 1:0:0:3: [sdm] Write Protect is off
sd 1:0:0:3: [sdm] Mode Sense: 77 00 10 08
sd 1:0:0:1: [sdk] Write Protect is off
sd 1:0:0:1: [sdk] Mode Sense: 77 00 10 08
sd 1:0:0:30: [sds] Write Protect is off
sd 1:0:0:30: [sds] Mode Sense: 77 00 10 08
sd 1:0:0:2: [sdl] Write Protect is off
sd 1:0:0:2: [sdl] Mode Sense: 77 00 10 08
sd 1:0:0:8: [sdr] Write Protect is off
sd 1:0:0:8: [sdr] Mode Sense: 77 00 10 08
sd 1:0:0:4: [sdn] Write Protect is off
sd 1:0:0:4: [sdn] Mode Sense: 77 00 10 08
sd 1:0:0:0: [sdj] Write cache: enabled, read cache: enabled, supports DPO and FUA
sd 1:0:0:5: [sdo] Write cache: enabled, read cache: enabled, supports DPO and FUA
sd 1:0:0:2: [sdl] Write cache: enabled, read cache: enabled, supports DPO and FUA
sd 1:0:0:3: [sdm] Write cache: enabled, read cache: enabled, supports DPO and FUA
sd 1:0:0:8: [sdr] Write cache: enabled, read cache: enabled, supports DPO and FUA
sd 1:0:0:7: [sdq] Write cache: enabled, read cache: enabled, supports DPO and FUA
sd 1:0:0:4: [sdn] Write cache: enabled, read cache: enabled, supports DPO and FUA
sd 1:0:0:30: [sds] Write cache: enabled, read cache: enabled, supports DPO and FUA
sd 1:0:0:1: [sdk] Write cache: enabled, read cache: enabled, supports DPO and FUA
sd 1:0:0:6: [sdp] Write Protect is off
sd 1:0:0:6: [sdp] Mode Sense: 77 00 10 08
sd 1:0:0:31: [sdt] Write Protect is off
sd 1:0:0:31: [sdt] Mode Sense: 77 00 10 08
sd 1:0:0:6: [sdp] Write cache: enabled, read cache: enabled, supports DPO and FUA
sd 1:0:0:31: [sdt] Write cache: enabled, read cache: enabled, supports DPO and FUA
 sdr:
 sdl:
 sdm:
 sdo:
sd 0:0:0:7: [sdh] Write cache: enabled, read cache: enabled, supports DPO and FUA
sd 0:0:0:5: [sdf] Write cache: enabled, read cache: enabled, supports DPO and FUA
sd 0:0:0:4: [sde] Write cache: enabled, read cache: enabled, supports DPO and FUA
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA
 sdq:
 sdn: unknown partition table
 sdj: unknown partition table
sd 0:0:0:1: [sdb] Write Protect is off
sd 0:0:0:1: [sdb] Mode Sense: 77 00 10 08
sd 0:0:0:1: [sdb] Write cache: enabled, read cache: enabled, supports DPO and FUA
 unknown partition table
 unknown partition table
sd 1:0:0:8: [sdr] Attached SCSI disk
 sds:
 sdc: unknown partition table
 unknown partition table
sd 1:0:0:0: [sdj] Attached SCSI disk
 unknown partition table
 sds1 sds2
sd 1:0:0:3: [sdm] Attached SCSI disk
sd 1:0:0:2: [sdl] Attached SCSI disk
sd 1:0:0:7: [sdq] Attached SCSI disk
 unknown partition table
sd 1:0:0:4: [sdn] Attached SCSI disk
sd 1:0:0:5: [sdo] Attached SCSI disk
 sdh:
 sdt:
 sde:
sd 1:0:0:30: [sds] Attached SCSI disk
 sdf:
 sdb:
 sdp: unknown partition table
sd 0:0:0:2: [sdc] Attached SCSI disk
 unknown partition table
 unknown partition table
 sda:
 sdk:
sd 1:0:0:31: [sdt] Attached SCSI disk
sd 1:0:0:6: [sdp] Attached SCSI disk
 unknown partition table
sd 1:0:0:1: [sdk] Attached SCSI disk
 unknown partition table
 unknown partition table
 unknown partition table
sd 0:0:0:7: [sdh] Attached SCSI disk
sd 0:0:0:4: [sde] Attached SCSI disk
 sdd:
sd 0:0:0:5: [sdf] Attached SCSI disk
sd 0:0:0:1: [sdb] Attached SCSI disk
 sdi:
 sdg: unknown partition table
sd 0:0:0:0: [sda] Attached SCSI disk
 unknown partition table
 unknown partition table
sd 0:0:0:6: [sdg] Attached SCSI disk
sd 0:0:0:8: [sdi] Attached SCSI disk
sd 0:0:0:3: [sdd] Attached SCSI disk
sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 2:0:0:0: Attached scsi CD-ROM sr0
EXT4-fs (sds1): mounted filesystem with ordered data mode
dracut: Mounted root filesystem /dev/sds1
dracut: Loading SELinux policy
SELinux:  Disabled at runtime.
SELinux:  Unregistering netfilter hooks
type=1404 audit(1290182664.197:2): selinux=0 auid=4294967295 ses=4294967295
dracut: /sbin/load_policy: Can't load policy: No such file or directory
dracut: Switching root
readahead: starting
udev: starting version 147
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:1: Attached scsi generic sg1 type 0
sd 0:0:0:2: Attached scsi generic sg2 type 0
sd 0:0:0:3: Attached scsi generic sg3 type 0
sd 0:0:0:4: Attached scsi generic sg4 type 0
sd 0:0:0:5: Attached scsi generic sg5 type 0
sd 0:0:0:6: Attached scsi generic sg6 type 0
sd 0:0:0:7: Attached scsi generic sg7 type 0
sd 0:0:0:8: Attached scsi generic sg8 type 0
sd 1:0:0:0: Attached scsi generic sg9 type 0
sd 1:0:0:1: Attached scsi generic sg10 type 0
sd 1:0:0:2: Attached scsi generic sg11 type 0
sd 1:0:0:3: Attached scsi generic sg12 type 0
sd 1:0:0:4: Attached scsi generic sg13 type 0
sd 1:0:0:5: Attached scsi generic sg14 type 0
sd 1:0:0:6: Attached scsi generic sg15 type 0
sd 1:0:0:7: Attached scsi generic sg16 type 0
sd 1:0:0:8: Attached scsi generic sg17 type 0
sd 1:0:0:30: Attached scsi generic sg18 type 0
sd 1:0:0:31: Attached scsi generic sg19 type 0
sr 2:0:0:0: Attached scsi generic sg20 type 5
dca service started, version 1.12.1
ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver - version 2.1.4-NAPI
Copyright (c) 1999-2010 Intel Corporation.
ixgbe 0000:13:00.0: PCI INT A -> GSI 30 (level, low) -> IRQ 30
ixgbe 0000:13:00.0: setting latency timer to 64
ixgbe: I/O Virtualization (IOV) set to 60
ixgbe: 0000:13:00.0: ixgbe_check_options: Flow Director hash filtering enabled
ixgbe: 0000:13:00.0: ixgbe_check_options: Flow Director allocated 64kB of packet buffer
ixgbe: 0000:13:00.0: ixgbe_check_options: ATR Tx Packet sample rate set to default of 20
ixgbe: 0000:13:00.0: ixgbe_check_options: FCoE Offload feature disabled
  alloc irq_desc for 58 on node -1
  alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
ixgbe 0000:13:00.0: irq 58 for MSI/MSI-X
  alloc irq_desc for 59 on node -1
  alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
ixgbe 0000:13:00.0: irq 59 for MSI/MSI-X
  alloc irq_desc for 60 on node -1
  alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
ixgbe 0000:13:00.0: irq 60 for MSI/MSI-X
ixgbe: 0000:13:00.0: ixgbe_init_interrupt_scheme: Multiqueue Disabled: Rx Queue count = 1, Tx Queue count = 1
ixgbe: eth0: ixgbe_probe: No DCA provider found.  Please start ioatdma for DCA functionality.
ixgbe: eth0: ixgbe_probe: (PCI Express:5.0Gb/s:Width x8) 00:1b:21:5f:53:e8
ixgbe: eth0: ixgbe_probe: MAC: 2, PHY: 15, SFP+: 5, PBA No: e68785-002

ixgbe: eth0: ixgbe_probe: GRO is enabled
ixgbe: eth0: ixgbe_probe: IOV is enabled with 60 VFs
ixgbe: eth0: ixgbe_vf_configuration: IOV: VF 0 is enabled mac 96:B6:58:BF:F9:CB
ixgbe: eth0: ixgbe_vf_configuration: IOV: VF 1 is enabled mac EE:26:4B:58:62:1A
ixgbe: eth0: ixgbe_vf_configuration: IOV: VF 2 is enabled mac 6E:D2:12:06:25:3E
ixgbe: eth0: ixgbe_vf_configuration: IOV: VF 3 is enabled mac 72:99:26:BB:C4:F5
ixgbe: eth0: ixgbe_vf_configuration: IOV: VF 4 is enabled mac 1E:A6:75:AF:F9:2E
ixgbe: eth0: ixgbe_vf_configuration: IOV: VF 5 is enabled mac 7E:54:0D:72:99:98
ixgbe: eth0: ixgbe_vf_configuration: IOV: VF 6 is enabled mac 7E:E7:9D:EC:15:1E
ixgbe: eth0: ixgbe_vf_configuration: IOV: VF 7 is enabled mac 9E:E2:84:6E:FA:09
ixgbe: eth0: ixgbe_vf_configuration: IOV: VF 8 is enabled mac F6:40:E4:AC:5F:DF
ixgbe: eth0: ixgbe_vf_configuration: IOV: VF 9 is enabled mac 5E:4E:4A:49:C2:16
ixgbe: eth0: ixgbe_vf_configuration: IOV: VF 10 is enabled mac 3E:72:6D:4A:EF:AC
ixgbe: eth0: ixgbe_vf_configuration: IOV: VF 11 is enabled mac 52:4B:4A:D1:C1:85
ixgbe: eth0: ixgbe_vf_configuration: IOV: VF 12 is enabled mac 26:88:94:2A:CC:FA
ixgbe: eth0: ixgbe_vf_configuration: IOV: VF 13 is enabled mac 96:9D:98:5D:12:D6
ixgbe: eth0: ixgbe_vf_configuration: IOV: VF 14 is enabled mac CA:38:36:A5:D2:6A
ixgbe: eth0: ixgbe_vf_configuration: IOV: VF 15 is enabled mac 3E:EC:3E:E1:D5:03
ixgbe: eth0: ixgbe_vf_configuration: IOV: VF 16 is enabled mac 16:21:B5:D6:F7:F1
ixgbe: eth0: ixgbe_vf_configuration: IOV: VF 17 is enabled mac 92:AE:8E:76:34:4E
ixgbe: eth0: ixgbe_vf_configuration: IOV: VF 18 is enabled mac 8E:D6:B7:95:5E:BE
ixgbe: eth0: ixgbe_vf_configuration: IOV: VF 19 is enabled mac E2:36:96:B3:89:BC
ixgbe: eth0: ixgbe_vf_configuration: IOV: VF 20 is enabled mac EA:CB:38:A7:E3:BC
ixgbe: eth0: ixgbe_vf_configuration: IOV: VF 21 is enabled mac 2A:77:B0:57:0B:F9
ixgbe: eth0: ixgbe_vf_configuration: IOV: VF 22 is enabled mac FE:13:A5:C5:4A:5A
ixgbe: eth0: ixgbe_vf_configuration: IOV: VF 23 is enabled mac 32:AA:DF:E1:B0:48
ixgbe: eth0: ixgbe_vf_configuration: IOV: VF 24 is enabled mac 26:9E:4D:C4:AF:F5
ixgbe: eth0: ixgbe_vf_configuration: IOV: VF 25 is enabled mac 42:31:0D:5B:CB:24
ixgbe: eth0: ixgbe_vf_configuration: IOV: VF 26 is enabled mac EE:38:2D:3D:DB:E2
ixgbe: eth0: ixgbe_vf_configuration: IOV: VF 27 is enabled mac BA:47:6D:46:8E:D5
ixgbe: eth0: ixgbe_vf_configuration: IOV: VF 28 is enabled mac F2:84:C8:AD:48:5A
ixgbe: eth0: ixgbe_vf_configuration: IOV: VF 29 is enabled mac 8A:45:3D:62:1A:F5
ixgbe: eth0: ixgbe_vf_configuration: IOV: VF 30 is enabled mac 5E:35:FF:E6:94:2C
ixgbe: eth0: ixgbe_vf_configuration: IOV: VF 31 is enabled mac D2:A5:B0:A7:A5:37
ixgbe: eth0: ixgbe_vf_configuration: IOV: VF 32 is enabled mac 3E:73:3C:2F:44:4B
ixgbe: eth0: ixgbe_vf_configuration: IOV: VF 33 is enabled mac B2:5B:E5:02:F2:5B
ixgbe: eth0: ixgbe_vf_configuration: IOV: VF 34 is enabled mac 92:2D:95:40:99:61
ixgbe: eth0: ixgbe_vf_configuration: IOV: VF 35 is enabled mac B6:92:89:8A:11:95
ixgbe: eth0: ixgbe_vf_configuration: IOV: VF 36 is enabled mac D6:21:0E:0F:3F:3C
ixgbe: eth0: ixgbe_vf_configuration: IOV: VF 37 is enabled mac 76:36:AA:DB:49:F2
ixgbe: eth0: ixgbe_vf_configuration: IOV: VF 38 is enabled mac DE:49:DC:7F:27:B7
ixgbe: eth0: ixgbe_vf_configuration: IOV: VF 39 is enabled mac 06:CD:53:BF:92:90
ixgbe: eth0: ixgbe_vf_configuration: IOV: VF 40 is enabled mac 76:5E:2D:9A:AB:35
ixgbe: eth0: ixgbe_vf_configuration: IOV: VF 41 is enabled mac E6:D7:F3:F6:44:A5
ixgbe: eth0: ixgbe_vf_configuration: IOV: VF 42 is enabled mac 46:0E:1B:C0:C3:BA
ixgbe: eth0: ixgbe_vf_configuration: IOV: VF 43 is enabled mac 4A:1D:14:8A:3C:30
ixgbe: eth0: ixgbe_vf_configuration: IOV: VF 44 is enabled mac 3E:C7:B5:C3:DA:33
ixgbe: eth0: ixgbe_vf_configuration: IOV: VF 45 is enabled mac 9A:32:79:F6:89:0A
ixgbe: eth0: ixgbe_vf_configuration: IOV: VF 46 is enabled mac 4E:AC:41:E4:16:D7
ixgbe: eth0: ixgbe_vf_configuration: IOV: VF 47 is enabled mac B6:68:D7:53:5F:0A
ixgbe: eth0: ixgbe_vf_configuration: IOV: VF 48 is enabled mac 8E:0D:48:B4:19:83
ixgbe: eth0: ixgbe_vf_configuration: IOV: VF 49 is enabled mac 36:AB:0E:DA:0B:61
ixgbe: eth0: ixgbe_vf_configuration: IOV: VF 50 is enabled mac 9A:AE:DC:58:E3:E5
ixgbe: eth0: ixgbe_vf_configuration: IOV: VF 51 is enabled mac F2:13:33:9E:3E:4D
ixgbe: eth0: ixgbe_vf_configuration: IOV: VF 52 is enabled mac D6:10:DC:54:2C:08
ixgbe: eth0: ixgbe_vf_configuration: IOV: VF 53 is enabled mac BE:20:0D:2F:35:AD
ixgbe: eth0: ixgbe_vf_configuration: IOV: VF 54 is enabled mac 42:1B:06:B6:99:49
ixgbe: eth0: ixgbe_vf_configuration: IOV: VF 55 is enabled mac 1E:F4:12:E0:4A:48
ixgbe: eth0: ixgbe_vf_configuration: IOV: VF 56 is enabled mac 2E:2D:19:E9:5C:BA
ixgbe: eth0: ixgbe_vf_configuration: IOV: VF 57 is enabled mac E2:39:60:7A:17:C3
ixgbe: eth0: ixgbe_vf_configuration: IOV: VF 58 is enabled mac 46:1A:67:67:17:21
ixgbe: eth0: ixgbe_vf_configuration: IOV: VF 59 is enabled mac 9E:76:44:A3:16:CC
ixgbe: eth0: ixgbe_probe: Intel(R) 10 Gigabit Network Connection
  alloc irq_desc for 37 on node -1
  alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
ixgbe 0000:13:00.1: PCI INT B -> GSI 37 (level, low) -> IRQ 37
ixgbe 0000:13:00.1: setting latency timer to 64
ixgbe: I/O Virtualization (IOV) set to 60
ixgbe: 0000:13:00.1: ixgbe_check_options: Flow Director hash filtering enabled
ixgbe: 0000:13:00.1: ixgbe_check_options: Flow Director allocated 64kB of packet buffer
ixgbe: 0000:13:00.1: ixgbe_check_options: ATR Tx Packet sample rate set to default of 20
ixgbe: 0000:13:00.1: ixgbe_check_options: FCoE Offload feature disabled
  alloc irq_desc for 61 on node -1
  alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
ixgbe 0000:13:00.1: irq 61 for MSI/MSI-X
  alloc irq_desc for 62 on node -1
  alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
ixgbe 0000:13:00.1: irq 62 for MSI/MSI-X
  alloc irq_desc for 63 on node -1
  alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
ixgbe 0000:13:00.1: irq 63 for MSI/MSI-X
ixgbe: 0000:13:00.1: ixgbe_init_interrupt_scheme: Multiqueue Disabled: Rx Queue count = 1, Tx Queue count = 1
ixgbe: eth1: ixgbe_probe: No DCA provider found.  Please start ioatdma for DCA functionality.
ixgbe: eth1: ixgbe_probe: (PCI Express:5.0Gb/s:Width x8) 00:1b:21:5f:53:e9
ixgbe: eth1: ixgbe_probe: MAC: 2, PHY: 15, SFP+: 6, PBA No: e68785-002

ixgbe: eth1: ixgbe_probe: GRO is enabled
ixgbe: eth1: ixgbe_probe: IOV is enabled with 60 VFs
ixgbe: eth1: ixgbe_vf_configuration: IOV: VF 0 is enabled mac 82:DE:9D:45:AC:A7
ixgbe: eth1: ixgbe_vf_configuration: IOV: VF 1 is enabled mac 0A:2A:70:E5:C6:BA
ixgbe: eth1: ixgbe_vf_configuration: IOV: VF 2 is enabled mac AE:2F:03:A4:60:5B
ixgbe: eth1: ixgbe_vf_configuration: IOV: VF 3 is enabled mac BA:E3:D7:4C:FB:B3
ixgbe: eth1: ixgbe_vf_configuration: IOV: VF 4 is enabled mac 1E:CF:EC:EC:D3:CC
ixgbe: eth1: ixgbe_vf_configuration: IOV: VF 5 is enabled mac 2E:9F:FC:62:30:AF
ixgbe: eth1: ixgbe_vf_configuration: IOV: VF 6 is enabled mac 7E:0E:BE:82:21:8D
ixgbe: eth1: ixgbe_vf_configuration: IOV: VF 7 is enabled mac 36:2B:77:63:A8:FE
ixgbe: eth1: ixgbe_vf_configuration: IOV: VF 8 is enabled mac 26:D2:2C:34:B4:7B
ixgbe: eth1: ixgbe_vf_configuration: IOV: VF 9 is enabled mac AA:42:65:5E:AC:1F
ixgbe: eth1: ixgbe_vf_configuration: IOV: VF 10 is enabled mac DA:17:1B:0C:97:FF
ixgbe: eth1: ixgbe_vf_configuration: IOV: VF 11 is enabled mac 76:6A:9A:08:2F:FA
ixgbe: eth1: ixgbe_vf_configuration: IOV: VF 12 is enabled mac EE:DD:00:7E:69:C1
ixgbe: eth1: ixgbe_vf_configuration: IOV: VF 13 is enabled mac DA:71:DB:FD:6F:F9
ixgbe: eth1: ixgbe_vf_configuration: IOV: VF 14 is enabled mac 46:00:D2:2C:6C:51
ixgbe: eth1: ixgbe_vf_configuration: IOV: VF 15 is enabled mac 8E:90:04:7E:F7:E3
ixgbe: eth1: ixgbe_vf_configuration: IOV: VF 16 is enabled mac 22:11:2E:7C:F6:A6
ixgbe: eth1: ixgbe_vf_configuration: IOV: VF 17 is enabled mac F2:BE:65:A2:B1:8C
ixgbe: eth1: ixgbe_vf_configuration: IOV: VF 18 is enabled mac 06:7D:A7:B1:C3:D2
ixgbe: eth1: ixgbe_vf_configuration: IOV: VF 19 is enabled mac 2E:4B:D8:73:25:54
ixgbe: eth1: ixgbe_vf_configuration: IOV: VF 20 is enabled mac A6:43:A7:E7:42:F9
ixgbe: eth1: ixgbe_vf_configuration: IOV: VF 21 is enabled mac A2:64:C7:12:1C:51
ixgbe: eth1: ixgbe_vf_configuration: IOV: VF 22 is enabled mac 7A:3F:0C:72:C9:38
ixgbe: eth1: ixgbe_vf_configuration: IOV: VF 23 is enabled mac 02:A9:DD:3B:8B:CA
ixgbe: eth1: ixgbe_vf_configuration: IOV: VF 24 is enabled mac 1E:9F:7A:A3:4B:2F
ixgbe: eth1: ixgbe_vf_configuration: IOV: VF 25 is enabled mac 7A:D0:CC:DF:0E:D3
ixgbe: eth1: ixgbe_vf_configuration: IOV: VF 26 is enabled mac 66:11:BF:22:40:BA
ixgbe: eth1: ixgbe_vf_configuration: IOV: VF 27 is enabled mac 4E:99:27:25:47:30
ixgbe: eth1: ixgbe_vf_configuration: IOV: VF 28 is enabled mac 1E:13:7E:A5:9F:35
ixgbe: eth1: ixgbe_vf_configuration: IOV: VF 29 is enabled mac A2:12:43:1C:66:85
ixgbe: eth1: ixgbe_vf_configuration: IOV: VF 30 is enabled mac DE:49:07:3D:5C:85
ixgbe: eth1: ixgbe_vf_configuration: IOV: VF 31 is enabled mac 8E:74:CE:B3:BE:88
ixgbe: eth1: ixgbe_vf_configuration: IOV: VF 32 is enabled mac 0E:61:A6:79:75:67
ixgbe: eth1: ixgbe_vf_configuration: IOV: VF 33 is enabled mac B6:11:92:83:0E:B2
ixgbe: eth1: ixgbe_vf_configuration: IOV: VF 34 is enabled mac 0E:F7:4C:75:6E:92
ixgbe: eth1: ixgbe_vf_configuration: IOV: VF 35 is enabled mac 7E:6A:FA:D9:31:D9
ixgbe: eth1: ixgbe_vf_configuration: IOV: VF 36 is enabled mac AA:6C:EE:18:A8:2E
ixgbe: eth1: ixgbe_vf_configuration: IOV: VF 37 is enabled mac EE:52:A3:65:F4:71
ixgbe: eth1: ixgbe_vf_configuration: IOV: VF 38 is enabled mac AA:25:2B:1C:73:04
ixgbe: eth1: ixgbe_vf_configuration: IOV: VF 39 is enabled mac 56:C4:34:28:CA:1F
ixgbe: eth1: ixgbe_vf_configuration: IOV: VF 40 is enabled mac 62:FA:C7:88:C1:BE
ixgbe: eth1: ixgbe_vf_configuration: IOV: VF 41 is enabled mac 66:A9:38:F6:FA:96
ixgbe: eth1: ixgbe_vf_configuration: IOV: VF 42 is enabled mac 4E:EA:DC:B8:AE:3E
ixgbe: eth1: ixgbe_vf_configuration: IOV: VF 43 is enabled mac 8A:BD:C8:0E:11:D8
ixgbe: eth1: ixgbe_vf_configuration: IOV: VF 44 is enabled mac E6:E0:04:FC:40:4B
ixgbe: eth1: ixgbe_vf_configuration: IOV: VF 45 is enabled mac 72:53:17:4D:BC:35
ixgbe: eth1: ixgbe_vf_configuration: IOV: VF 46 is enabled mac 72:2B:F8:70:0E:20
ixgbe: eth1: ixgbe_vf_configuration: IOV: VF 47 is enabled mac 96:BB:FD:04:07:1D
ixgbe: eth1: ixgbe_vf_configuration: IOV: VF 48 is enabled mac 26:1C:42:AF:9C:94
ixgbe: eth1: ixgbe_vf_configuration: IOV: VF 49 is enabled mac AA:45:CB:9A:8F:7B
ixgbe: eth1: ixgbe_vf_configuration: IOV: VF 50 is enabled mac 62:C4:03:88:CD:9C
ixgbe: eth1: ixgbe_vf_configuration: IOV: VF 51 is enabled mac 3A:4B:15:A1:85:64
ixgbe: eth1: ixgbe_vf_configuration: IOV: VF 52 is enabled mac 4E:4C:F6:A3:CB:99
ixgbe: eth1: ixgbe_vf_configuration: IOV: VF 53 is enabled mac 26:C2:C5:AD:DD:6D
ixgbe: eth1: ixgbe_vf_configuration: IOV: VF 54 is enabled mac 4E:80:F2:EE:A5:CD
ixgbe: eth1: ixgbe_vf_configuration: IOV: VF 55 is enabled mac FE:77:9A:83:B4:99
ixgbe: eth1: ixgbe_vf_configuration: IOV: VF 56 is enabled mac 5A:C7:D2:C1:78:65
ixgbe: eth1: ixgbe_vf_configuration: IOV: VF 57 is enabled mac B2:CD:FC:8E:7C:29
ixgbe: eth1: ixgbe_vf_configuration: IOV: VF 58 is enabled mac 9A:0F:FD:17:29:2A
ixgbe: eth1: ixgbe_vf_configuration: IOV: VF 59 is enabled mac F2:92:96:6B:08:2B
ixgbe: eth1: ixgbe_probe: Intel(R) 10 Gigabit Network Connection
udev: renamed network interface eth0 to eth2
udev: renamed network interface eth1 to eth3
EDAC MC: Ver: 2.1.0 Sep  1 2010
PCI: Discovered peer bus ff
PCI: Discovered peer bus fe
EDAC i7core: Driver loaded.
32bit 0000:00:14.0 uses non-identity mapping
ioatdma: Intel(R) QuickData Technology Driver 4.00
  alloc irq_desc for 43 on node -1
  alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
ioatdma 0000:00:16.0: PCI INT A -> GSI 43 (level, low) -> IRQ 43
ioatdma 0000:00:16.0: setting latency timer to 64
  alloc irq_desc for 64 on node -1
  alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
ioatdma 0000:00:16.0: irq 64 for MSI/MSI-X
  alloc irq_desc for 44 on node -1
  alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
ioatdma 0000:00:16.1: PCI INT B -> GSI 44 (level, low) -> IRQ 44
ioatdma 0000:00:16.1: setting latency timer to 64
  alloc irq_desc for 65 on node -1
  alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
ioatdma 0000:00:16.1: irq 65 for MSI/MSI-X
  alloc irq_desc for 45 on node -1
  alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
ioatdma 0000:00:16.2: PCI INT C -> GSI 45 (level, low) -> IRQ 45
ioatdma 0000:00:16.2: setting latency timer to 64
  alloc irq_desc for 66 on node -1
  alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
ioatdma 0000:00:16.2: irq 66 for MSI/MSI-X
  alloc irq_desc for 46 on node -1
  alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
ioatdma 0000:00:16.3: PCI INT D -> GSI 46 (level, low) -> IRQ 46
ioatdma 0000:00:16.3: setting latency timer to 64
  alloc irq_desc for 67 on node -1
  alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
ioatdma 0000:00:16.3: irq 67 for MSI/MSI-X
ioatdma 0000:00:16.4: PCI INT A -> GSI 43 (level, low) -> IRQ 43
ioatdma 0000:00:16.4: setting latency timer to 64
  alloc irq_desc for 68 on node -1
  alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
ioatdma 0000:00:16.4: irq 68 for MSI/MSI-X
ioatdma 0000:00:16.5: PCI INT B -> GSI 44 (level, low) -> IRQ 44
ioatdma 0000:00:16.5: setting latency timer to 64
  alloc irq_desc for 69 on node -1
  alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
ioatdma 0000:00:16.5: irq 69 for MSI/MSI-X
ioatdma 0000:00:16.6: PCI INT C -> GSI 45 (level, low) -> IRQ 45
ioatdma 0000:00:16.6: setting latency timer to 64
  alloc irq_desc for 70 on node -1
  alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
ioatdma 0000:00:16.6: irq 70 for MSI/MSI-X
ioatdma 0000:00:16.7: PCI INT D -> GSI 46 (level, low) -> IRQ 46
ioatdma 0000:00:16.7: setting latency timer to 64
  alloc irq_desc for 71 on node -1
  alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
ioatdma 0000:00:16.7: irq 71 for MSI/MSI-X
Broadcom NetXtreme II Gigabit Ethernet Driver bnx2 v2.0.8-j15 (Feb 15, 2010)
bnx2 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
bnx2 0000:01:00.0: setting latency timer to 64
bnx2 0000:01:00.0: firmware: requesting bnx2/bnx2-mips-09-5.0.0.j15.fw
bnx2 0000:01:00.0: firmware: requesting bnx2/bnx2-rv2p-09-5.0.0.j10.fw
eth0: Broadcom NetXtreme II BCM5709 1000Base-T (C0) PCI Express found at mem 92000000, IRQ 16, node addr 00:21:5e:5d:10:80
bnx2 0000:01:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
bnx2 0000:01:00.1: setting latency timer to 64
bnx2 0000:01:00.1: firmware: requesting bnx2/bnx2-mips-09-5.0.0.j15.fw
bnx2 0000:01:00.1: firmware: requesting bnx2/bnx2-rv2p-09-5.0.0.j10.fw
eth1: Broadcom NetXtreme II BCM5709 1000Base-T (C0) PCI Express found at mem 94000000, IRQ 17, node addr 00:21:5e:5d:10:82
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
iTCO_vendor_support: vendor-support=0
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05
iTCO_wdt: Found a ICH10 TCO device (Version=2, TCOBASE=0x05e0)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
usb0: register 'cdc_ether' at usb-0000:00:1d.0-2, CDC Ethernet Device, 02:21:5e:5e:10:83
usbcore: registered new interface driver cdc_ether
  alloc irq_desc for 22 on node -1
  alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
i801_smbus 0000:00:1f.3: PCI INT B -> GSI 22 (level, low) -> IRQ 22
32bit 0000:00:1f.3 uses non-identity mapping
Adding 10485752k swap on /dev/sds2.  Priority:-1 extents:1 across:10485752k 
