Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 2.6.32-71.el6.x86_64 (mockbuild@x86-007.build.bos.redhat.com) (gcc version 4.4.4 20100726 (Red Hat 4.4.4-13) (GCC) ) #1 SMP Wed Sep 1 01:33:01 EDT 2010
Command line: ro root=/dev/mapper/vg_client-lv_root rd_LVM_LV=vg_client/lv_root rd_LVM_LV=vg_client/lv_swap    rhgb quiet clocksource=tsc
KERNEL supported cpus:
  Intel GenuineIntel
  AMD AuthenticAMD
  Centaur CentaurHauls
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009f400 (usable)
 BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 00000000cfe56000 (usable)
 BIOS-e820: 00000000cfe56000 - 00000000cfe5e000 (ACPI data)
 BIOS-e820: 00000000cfe5e000 - 00000000cfe5f000 (usable)
 BIOS-e820: 00000000cfe5f000 - 00000000d0000000 (reserved)
 BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
 BIOS-e820: 00000000fec00000 - 00000000fed00000 (reserved)
 BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved)
 BIOS-e820: 00000000ffc00000 - 0000000100000000 (reserved)
 BIOS-e820: 0000000100000000 - 000000022ffff000 (usable)
DMI 2.4 present.
e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
last_pfn = 0x22ffff max_arch_pfn = 0x400000000
MTRR default type: write-back
MTRR fixed ranges enabled:
  00000-9FFFF write-back
  A0000-BFFFF uncachable
  C0000-FFFFF write-protect
MTRR variable ranges enabled:
  0 base 00D0000000 mask 0FF0000000 uncachable
  1 base 00E0000000 mask 0FE0000000 uncachable
  2 disabled
  3 disabled
  4 disabled
  5 disabled
  6 disabled
  7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
last_pfn = 0xcfe5f max_arch_pfn = 0x400000000
initial memory mapped : 0 - 20000000
init_memory_mapping: 0000000000000000-00000000cfe5f000
 0000000000 - 00cfe00000 page 2M
 00cfe00000 - 00cfe5f000 page 4k
kernel direct mapping tables up to cfe5f000 @ 8000-e000
init_memory_mapping: 0000000100000000-000000022ffff000
 0100000000 - 022fe00000 page 2M
 022fe00000 - 022ffff000 page 4k
kernel direct mapping tables up to 22ffff000 @ c000-17000
RAMDISK: 372b5000 - 37fefe0f
ACPI: RSDP 00000000000f4f00 00024 (v02 HP    )
ACPI: XSDT 00000000cfe567c0 00074 (v01 HP     ProLiant 00000002   ? 0000162E)
ACPI: FACP 00000000cfe56840 000F4 (v03 HP     ProLiant 00000002   ? 0000162E)
ACPI Warning: Invalid length for Pm1aControlBlock: 32, using default 16 (20090903/tbfadt-607)
ACPI: DSDT 00000000cfe56940 02047 (v01 HP         DSDT 00000001 INTL 20030228)
ACPI: FACS 00000000cfe56100 00040
ACPI: SPCR 00000000cfe56140 00050 (v01 HP     SPCRRBSU 00000001   ? 0000162E)
ACPI: MCFG 00000000cfe561c0 0003C (v01 HP     ProLiant 00000001      00000000)
ACPI: HPET 00000000cfe56200 00038 (v01 HP     ProLiant 00000002   ? 0000162E)
ACPI: SPMI 00000000cfe56240 00040 (v05 HP     ProLiant 00000001   ? 0000162E)
ACPI: ERST 00000000cfe56280 001D0 (v01 HP     ProLiant 00000001   ? 0000162E)
ACPI: APIC 00000000cfe56480 0009E (v01 HP     ProLiant 00000002      00000000)
ACPI: FFFF 00000000cfe56540 00176 (v01 HP     ProLiant 00000001   ? 0000162E)
ACPI: BERT 00000000cfe566c0 00030 (v01 HP     ProLiant 00000001   ? 0000162E)
ACPI: HEST 00000000cfe56700 000BC (v01 HP     ProLiant 00000001   ? 0000162E)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at 0000000000000000-000000022ffff000
Bootmem setup node 0 0000000000000000-000000022ffff000
  NODE_DATA [0000000000012000 - 0000000000045fff]
  bootmap [0000000000046000 -  000000000008bfff] pages 46
(8 early reservations) ==> bootmem [0000000000 - 022ffff000]
  #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
  #1 [0000006000 - 0000008000]       TRAMPOLINE ==> [0000006000 - 0000008000]
  #2 [0001000000 - 0001c9eff8]    TEXT DATA BSS ==> [0001000000 - 0001c9eff8]
  #3 [00372b5000 - 0037fefe0f]          RAMDISK ==> [00372b5000 - 0037fefe0f]
  #4 [000009f400 - 0000100000]    BIOS reserved ==> [000009f400 - 0000100000]
  #5 [0001c9f000 - 0001c9f110]              BRK ==> [0001c9f000 - 0001c9f110]
  #6 [0000008000 - 000000c000]          PGTABLE ==> [0000008000 - 000000c000]
  #7 [000000c000 - 0000012000]          PGTABLE ==> [000000c000 - 0000012000]
found SMP MP-table at [ffff8800000f4f80] f4f80
 [ffffea0000000000-ffffea0007bfffff] PMD -> [ffff880028600000-ffff88002f7fffff] on node 0
Zone PFN ranges:
  DMA      0x00000001 -> 0x00001000
  DMA32    0x00001000 -> 0x00100000
  Normal   0x00100000 -> 0x0022ffff
Movable zone start PFN for each node
early_node_map[4] active PFN ranges
    0: 0x00000001 -> 0x0000009f
    0: 0x00000100 -> 0x000cfe56
    0: 0x000cfe5e -> 0x000cfe5f
    0: 0x00100000 -> 0x0022ffff
On node 0 totalpages: 2096628
  DMA zone: 56 pages used for memmap
  DMA zone: 109 pages reserved
  DMA zone: 3833 pages, LIFO batch:0
  DMA32 zone: 14280 pages used for memmap
  DMA32 zone: 833167 pages, LIFO batch:31
  Normal zone: 17024 pages used for memmap
  Normal zone: 1228159 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x908
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] disabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] disabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] disabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] disabled)
ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x09] address[0xfec80000] gsi_base[24])
IOAPIC[1]: apic_id 9, version 32, address 0xfec80000, GSI 24-47
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
SMP: Allowing 8 CPUs, 4 hotplug CPUs
nr_irqs_gsi: 48
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
PM: Registered nosave memory: 00000000cfe56000 - 00000000cfe5e000
PM: Registered nosave memory: 00000000cfe5f000 - 00000000d0000000
PM: Registered nosave memory: 00000000d0000000 - 00000000e0000000
PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
PM: Registered nosave memory: 00000000f0000000 - 00000000fec00000
PM: Registered nosave memory: 00000000fec00000 - 00000000fed00000
PM: Registered nosave memory: 00000000fed00000 - 00000000fee00000
PM: Registered nosave memory: 00000000fee00000 - 00000000fee10000
PM: Registered nosave memory: 00000000fee10000 - 00000000ffc00000
PM: Registered nosave memory: 00000000ffc00000 - 0000000100000000
Allocating PCI resources starting at d0000000 (gap: d0000000:10000000)
Booting paravirtualized kernel on bare hardware
NR_CPUS:4096 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
PERCPU: Embedded 31 pages/cpu @ffff880028200000 s95064 r8192 d23720 u262144
pcpu-alloc: s95064 r8192 d23720 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7 
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 2065159
Policy zone: Normal
Kernel command line: ro root=/dev/mapper/vg_client-lv_root rd_LVM_LV=vg_client/lv_root rd_LVM_LV=vg_client/lv_swap    rhgb quiet clocksource=tsc
PID hash table entries: 4096 (order: 3, 32768 bytes)
Checking aperture...
No AGP bridge found
AMD-Vi disabled by default: pass amd_iommu=on to enable
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Placing 64MB software IO TLB between ffff880020000000 - ffff880024000000
software IO TLB at phys 0x20000000 - 0x24000000
Memory: 8175724k/9175036k available (4935k kernel code, 788524k absent, 210788k reserved, 3927k data, 1220k init)
Hierarchical RCU implementation.
NR_IRQS:33024 nr_irqs:880
Extended CMOS year: 2000
Console: colour VGA+ 80x25
console [tty0] enabled
allocated 83886080 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
HPET: 3 timers in total, 0 timers will be used for per-cpu timer
Fast TSC calibration using PIT
Detected 2833.953 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 5667.90 BogoMIPS (lpj=2833953)
pid_max: default: 32768 minimum: 301
Security Framework initialized
SELinux:  Initializing.
SELinux:  Starting in permissive mode
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 6 MCE banks
CPU0: Thermal monitoring enabled (TM2)
using mwait in idle threads.
Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
... version:                2
... bit width:              40
... generic registers:      2
... value mask:             000000ffffffffff
... max period:             000000007fffffff
... fixed-purpose events:   3
... event mask:             0000000700000003
ACPI: Core revision 20090903
ftrace: converting mcount calls to 0f 1f 44 00 00
ftrace: allocating 20276 entries in 80 pages
Setting APIC routing to flat
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Xeon(R) CPU           E5440  @ 2.83GHz stepping 06
Booting Node   0, Processors  #1 #2 #3
Brought up 4 CPUs
Total of 4 processors activated (22667.89 BogoMIPS).
Testing NMI watchdog ... OK.
sizeof(vma)=200 bytes
sizeof(page)=56 bytes
sizeof(inode)=592 bytes
sizeof(dentry)=192 bytes
sizeof(ext3inode)=800 bytes
sizeof(buffer_head)=104 bytes
sizeof(skbuff)=232 bytes
sizeof(task_struct)=2600 bytes
devtmpfs: initialized
regulator: core version 0.5
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
PCI: MCFG area at e0000000 reserved in E820
PCI: Using MMCONFIG at e0000000 - efffffff
PCI: Using configuration type 1 for base access
PCI: HP ProLiant DL360 detected, enabling pci=bfsort.
bio: create slab <bio-0> at 0
ACPI: EC: Look up EC in DSDT
ACPI Error: Field [CDW3] at 96 exceeds Buffer [NULL] size 64 (bits) (20090903/dsopcode-596)
ACPI Error (psparse-0537): Method parse/execution failed [\_SB_._OSC] (Node ffff8802268eaab0), AE_AML_BUFFER_LIMIT
ACPI: Interpreter enabled
ACPI: (supports S0 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:00.0: PME# disabled
pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: PME# disabled
pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
pci 0000:00:03.0: PME# disabled
pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
pci 0000:00:04.0: PME# disabled
pci 0000:00:05.0: PME# supported from D0 D3hot D3cold
pci 0000:00:05.0: PME# disabled
pci 0000:00:06.0: PME# supported from D0 D3hot D3cold
pci 0000:00:06.0: PME# disabled
pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
pci 0000:00:07.0: PME# disabled
pci 0000:00:1d.0: reg 20 io port: [0x1000-0x101f]
pci 0000:00:1d.1: reg 20 io port: [0x1020-0x103f]
pci 0000:00:1d.2: reg 20 io port: [0x1040-0x105f]
pci 0000:00:1d.3: reg 20 io port: [0x1060-0x107f]
pci 0000:00:1d.7: reg 10 32bit mmio: [0xf7df0000-0xf7df03ff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: PME# disabled
pci 0000:00:1f.1: reg 10 io port: [0x1f0-0x1f7]
pci 0000:00:1f.1: reg 14 io port: [0x3f4-0x3f7]
pci 0000:00:1f.1: reg 18 io port: [0x170-0x177]
pci 0000:00:1f.1: reg 1c io port: [0x374-0x377]
pci 0000:00:1f.1: reg 20 io port: [0x500-0x50f]
pci 0000:09:00.0: PME# supported from D0 D3hot D3cold
pci 0000:09:00.0: PME# disabled
pci 0000:09:00.3: PME# supported from D0 D3hot D3cold
pci 0000:09:00.3: PME# disabled
pci 0000:09:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
pci 0000:00:02.0: bridge 32bit mmio: [0xfdf00000-0xfdffffff]
pci 0000:0a:00.0: PME# supported from D0 D3hot D3cold
pci 0000:0a:00.0: PME# disabled
pci 0000:0a:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
pci 0000:0a:01.0: PME# supported from D0 D3hot D3cold
pci 0000:0a:01.0: PME# disabled
pci 0000:0a:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
pci 0000:0a:02.0: PME# supported from D0 D3hot D3cold
pci 0000:0a:02.0: PME# disabled
pci 0000:0a:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
pci 0000:06:00.0: reg 10 64bit mmio: [0xfde00000-0xfdefffff]
pci 0000:06:00.0: reg 18 io port: [0x4000-0x40ff]
pci 0000:06:00.0: reg 1c 64bit mmio: [0xfddf0000-0xfddf0fff]
pci 0000:06:00.0: reg 30 32bit mmio pref: [0x000000-0x03ffff]
pci 0000:06:00.0: supports D1
pci 0000:06:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
pci 0000:00:03.0: bridge io port: [0x4000-0x4fff]
pci 0000:00:03.0: bridge 32bit mmio: [0xfdd00000-0xfdefffff]
pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
pci 0000:02:00.0: PME# disabled
pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
pci 0000:00:06.0: bridge 32bit mmio: [0xf8000000-0xf9ffffff]
pci 0000:03:00.0: reg 10 64bit mmio: [0xf8000000-0xf9ffffff]
pci 0000:03:00.0: reg 30 32bit mmio pref: [0x000000-0x0007ff]
pci 0000:03:00.0: PME# supported from D3hot D3cold
pci 0000:03:00.0: PME# disabled
pci 0000:02:00.0: bridge 32bit mmio: [0xf8000000-0xf9ffffff]
pci 0000:04:00.0: PME# supported from D0 D3hot D3cold
pci 0000:04:00.0: PME# disabled
pci 0000:04:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
pci 0000:00:07.0: bridge 32bit mmio: [0xfa000000-0xfbffffff]
pci 0000:05:00.0: reg 10 64bit mmio: [0xfa000000-0xfbffffff]
pci 0000:05:00.0: reg 30 32bit mmio pref: [0x000000-0x0007ff]
pci 0000:05:00.0: PME# supported from D3hot D3cold
pci 0000:05:00.0: PME# disabled
pci 0000:04:00.0: bridge 32bit mmio: [0xfa000000-0xfbffffff]
pci 0000:01:03.0: reg 10 32bit mmio pref: [0xd8000000-0xdfffffff]
pci 0000:01:03.0: reg 14 io port: [0x3000-0x30ff]
pci 0000:01:03.0: reg 18 32bit mmio: [0xf7ff0000-0xf7ffffff]
pci 0000:01:03.0: reg 30 32bit mmio pref: [0x000000-0x01ffff]
pci 0000:01:03.0: supports D1 D2
pci 0000:01:04.0: reg 10 io port: [0x2800-0x28ff]
pci 0000:01:04.0: reg 14 32bit mmio: [0xf7fe0000-0xf7fe01ff]
pci 0000:01:04.0: PME# supported from D0 D3hot D3cold
pci 0000:01:04.0: PME# disabled
pci 0000:01:04.2: reg 10 io port: [0x3400-0x34ff]
pci 0000:01:04.2: reg 14 32bit mmio: [0xf7fd0000-0xf7fd07ff]
pci 0000:01:04.2: reg 18 32bit mmio: [0xf7fc0000-0xf7fc1fff]
pci 0000:01:04.2: reg 1c 32bit mmio: [0xf7f00000-0xf7f7ffff]
pci 0000:01:04.2: reg 30 32bit mmio pref: [0x000000-0x00ffff]
pci 0000:01:04.2: PME# supported from D0 D3hot D3cold
pci 0000:01:04.2: PME# disabled
pci 0000:01:04.4: reg 20 io port: [0x3800-0x381f]
pci 0000:01:04.4: PME# supported from D0 D3hot D3cold
pci 0000:01:04.4: PME# disabled
pci 0000:01:04.6: reg 10 32bit mmio: [0xf7ef0000-0xf7ef00ff]
pci 0000:01:04.6: PME# supported from D0 D3hot D3cold
pci 0000:01:04.6: PME# disabled
pci 0000:00:1e.0: transparent bridge
pci 0000:00:1e.0: bridge io port: [0x2000-0x3fff]
pci 0000:00:1e.0: bridge 32bit mmio: [0xf7e00000-0xf7ffffff]
pci 0000:00:1e.0: bridge 64bit mmio pref: [0xd8000000-0xdfffffff]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.IP2P._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PT02._PRT]
ACPI Warning for \_SB_.PCI0.PT02._PRT: Return Package has no elements (empty) (20090903/nspredef-433)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PT02.IPE4._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PT02.IPE4.IPE1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PT02.P2P2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PT03._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PT04._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PT06.NB01._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PT07.NB02._PRT]
Unable to assume PCIe control: Disabling ASPM
ACPI: PCI Interrupt Link [LNKA] (IRQs *5 7 10 11)
ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *7 10 11)
ACPI: PCI Interrupt Link [LNKC] (IRQs 5 7 *10 11)
ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 *10 11)
ACPI: PCI Interrupt Link [LNKE] (IRQs 5 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs *5 7 10 11)
ACPI: PCI Interrupt Link [LNKG] (IRQs 5 7 *10 11)
ACPI: PCI Interrupt Link [LNKH] (IRQs 5 *7 10 11)
vgaarb: device added: PCI:0000:01:03.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: old code would have set cacheline size to 32 bytes, but clflush_size = 64
PCI: pci_cache_line_size set to 64 bytes
NetLabel: Initializing
NetLabel:  domain hash size = 128
NetLabel:  protocols = UNLABELED CIPSOv4
NetLabel:  unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 64-bit 14.318180 MHz counter
Switching to clocksource tsc
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 10 devices
ACPI: ACPI bus type pnp unregistered
system 00:01: ioport range 0x408-0x40f has been reserved
system 00:01: ioport range 0x4d0-0x4d1 has been reserved
system 00:01: ioport range 0x700-0x71f has been reserved
system 00:01: ioport range 0x800-0x83f has been reserved
system 00:01: ioport range 0x900-0x97f has been reserved
system 00:01: ioport range 0xc80-0xc83 has been reserved
system 00:01: ioport range 0xcd4-0xcd7 has been reserved
system 00:01: ioport range 0xf50-0xf58 has been reserved
system 00:01: ioport range 0xca0-0xca1 has been reserved
system 00:01: ioport range 0xca4-0xca5 has been reserved
system 00:01: ioport range 0x2f8-0x2ff has been reserved
system 00:01: iomem range 0xe0000000-0xefffffff has been reserved
system 00:01: iomem range 0xfe000000-0xfebfffff has been reserved
pci 0000:0a:00.0: PCI bridge to [bus 0b-0d]
pci 0000:0a:00.0: PCI bridge, secondary bus 0000:0b
pci 0000:0a:00.0:   bridge window [io  disabled]
pci 0000:0a:00.0:   bridge window [mem disabled]
pci 0000:0a:00.0:   bridge window [mem pref disabled]
pci 0000:0a:01.0: PCI bridge to [bus 0e-0e]
pci 0000:0a:01.0: PCI bridge, secondary bus 0000:0e
pci 0000:0a:01.0:   bridge window [io  disabled]
pci 0000:0a:01.0:   bridge window [mem disabled]
pci 0000:0a:01.0:   bridge window [mem pref disabled]
pci 0000:0a:02.0: PCI bridge to [bus 0f-0f]
pci 0000:0a:02.0: PCI bridge, secondary bus 0000:0f
pci 0000:0a:02.0:   bridge window [io  disabled]
pci 0000:0a:02.0:   bridge window [mem disabled]
pci 0000:0a:02.0:   bridge window [mem pref disabled]
pci 0000:09:00.0: PCI bridge to [bus 0a-0f]
pci 0000:09:00.0: PCI bridge, secondary bus 0000:0a
pci 0000:09:00.0:   bridge window [io  disabled]
pci 0000:09:00.0:   bridge window [mem disabled]
pci 0000:09:00.0:   bridge window [mem pref disabled]
pci 0000:09:00.3: PCI bridge to [bus 10-12]
pci 0000:09:00.3: PCI bridge, secondary bus 0000:10
pci 0000:09:00.3:   bridge window [io  disabled]
pci 0000:09:00.3:   bridge window [mem disabled]
pci 0000:09:00.3:   bridge window [mem pref disabled]
pci 0000:00:02.0: PCI bridge to [bus 09-12]
pci 0000:00:02.0: PCI bridge, secondary bus 0000:09
pci 0000:00:02.0:   bridge window [io  disabled]
pci 0000:00:02.0:   bridge window [0xfdf00000-0xfdffffff]
pci 0000:00:02.0:   bridge window [mem pref disabled]
pci 0000:00:03.0: PCI bridge to [bus 06-08]
pci 0000:00:03.0: PCI bridge, secondary bus 0000:06
pci 0000:00:03.0:   bridge window [0x4000-0x4fff]
pci 0000:00:03.0:   bridge window [0xfdd00000-0xfdefffff]
pci 0000:00:03.0:   bridge window [0xd0000000-0xd00fffff]
pci 0000:00:04.0: PCI bridge to [bus 13-15]
pci 0000:00:04.0: PCI bridge, secondary bus 0000:13
pci 0000:00:04.0:   bridge window [io  disabled]
pci 0000:00:04.0:   bridge window [mem disabled]
pci 0000:00:04.0:   bridge window [mem pref disabled]
pci 0000:00:05.0: PCI bridge to [bus 16-16]
pci 0000:00:05.0: PCI bridge, secondary bus 0000:16
pci 0000:00:05.0:   bridge window [io  disabled]
pci 0000:00:05.0:   bridge window [mem disabled]
pci 0000:00:05.0:   bridge window [mem pref disabled]
pci 0000:02:00.0: PCI bridge to [bus 03-03]
pci 0000:02:00.0: PCI bridge, secondary bus 0000:03
pci 0000:02:00.0:   bridge window [io  disabled]
pci 0000:02:00.0:   bridge window [0xf8000000-0xf9ffffff]
pci 0000:02:00.0:   bridge window [0xd0100000-0xd01fffff]
pci 0000:00:06.0: PCI bridge to [bus 02-03]
pci 0000:00:06.0: PCI bridge, secondary bus 0000:02
pci 0000:00:06.0:   bridge window [io  disabled]
pci 0000:00:06.0:   bridge window [0xf8000000-0xf9ffffff]
pci 0000:00:06.0:   bridge window [0xd0100000-0xd01fffff]
pci 0000:04:00.0: PCI bridge to [bus 05-05]
pci 0000:04:00.0: PCI bridge, secondary bus 0000:05
pci 0000:04:00.0:   bridge window [io  disabled]
pci 0000:04:00.0:   bridge window [0xfa000000-0xfbffffff]
pci 0000:04:00.0:   bridge window [0xd0200000-0xd02fffff]
pci 0000:00:07.0: PCI bridge to [bus 04-05]
pci 0000:00:07.0: PCI bridge, secondary bus 0000:04
pci 0000:00:07.0:   bridge window [io  disabled]
pci 0000:00:07.0:   bridge window [0xfa000000-0xfbffffff]
pci 0000:00:07.0:   bridge window [0xd0200000-0xd02fffff]
pci 0000:00:1e.0: PCI bridge to [bus 01-01]
pci 0000:00:1e.0: PCI bridge, secondary bus 0000:01
pci 0000:00:1e.0:   bridge window [0x2000-0x3fff]
pci 0000:00:1e.0:   bridge window [0xf7e00000-0xf7ffffff]
pci 0000:00:1e.0:   bridge window [0xd8000000-0xdfffffff]
pci 0000:00:02.0: setting latency timer to 64
pci 0000:09:00.0: setting latency timer to 64
  alloc irq_desc for 16 on node -1
  alloc kstat_irqs on node -1
pci 0000:0a:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:0a:00.0: setting latency timer to 64
  alloc irq_desc for 17 on node -1
  alloc kstat_irqs on node -1
pci 0000:0a:01.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
pci 0000:0a:01.0: setting latency timer to 64
  alloc irq_desc for 18 on node -1
  alloc kstat_irqs on node -1
pci 0000:0a:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
pci 0000:0a:02.0: setting latency timer to 64
pci 0000:09:00.3: setting latency timer to 64
pci 0000:00:03.0: setting latency timer to 64
pci 0000:00:04.0: setting latency timer to 64
pci 0000:00:05.0: setting latency timer to 64
pci 0000:00:06.0: setting latency timer to 64
pci 0000:02:00.0: setting latency timer to 64
pci 0000:00:07.0: setting latency timer to 64
pci 0000:04:00.0: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
pci_bus 0000:09: resource 1 mem: [0xfdf00000-0xfdffffff]
pci_bus 0000:06: resource 0 io:  [0x4000-0x4fff]
pci_bus 0000:06: resource 1 mem: [0xfdd00000-0xfdefffff]
pci_bus 0000:06: resource 2 pref mem [0xd0000000-0xd00fffff]
pci_bus 0000:02: resource 1 mem: [0xf8000000-0xf9ffffff]
pci_bus 0000:02: resource 2 pref mem [0xd0100000-0xd01fffff]
pci_bus 0000:03: resource 1 mem: [0xf8000000-0xf9ffffff]
pci_bus 0000:03: resource 2 pref mem [0xd0100000-0xd01fffff]
pci_bus 0000:04: resource 1 mem: [0xfa000000-0xfbffffff]
pci_bus 0000:04: resource 2 pref mem [0xd0200000-0xd02fffff]
pci_bus 0000:05: resource 1 mem: [0xfa000000-0xfbffffff]
pci_bus 0000:05: resource 2 pref mem [0xd0200000-0xd02fffff]
pci_bus 0000:01: resource 0 io:  [0x2000-0x3fff]
pci_bus 0000:01: resource 1 mem: [0xf7e00000-0xf7ffffff]
pci_bus 0000:01: resource 2 pref mem [0xd8000000-0xdfffffff]
pci_bus 0000:01: resource 3 io:  [0x00-0xffff]
pci_bus 0000:01: resource 4 mem: [0x000000-0xffffffffffffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP reno registered
NET: Registered protocol family 1
pci 0000:00:1f.0: rerouting interrupts for [8086:2670]
pci 0000:01:03.0: Boot video device
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 13547k freed
platform rtc_cmos: registered platform RTC device (no PNP device found)
audit: initializing netlink socket (disabled)
type=2000 audit(1305603615.595:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 15994
SELinux:  Registering netfilter hooks
alg: No test for stdrng (krng)
ksign: Installing public key data
Loading keyring
- Added public key 9D480283FFC05098
- User ID: Red Hat, Inc. (Kernel Module GPG key)
- Added public key D4A26C9CCD09BEDA
- User ID: Red Hat Enterprise Linux Driver Update Program <secalert@redhat.com>
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
  alloc irq_desc for 48 on node -1
  alloc kstat_irqs on node -1
pcieport 0000:00:02.0: irq 48 for MSI/MSI-X
pcieport 0000:00:02.0: setting latency timer to 64
  alloc irq_desc for 49 on node -1
  alloc kstat_irqs on node -1
pcieport 0000:00:03.0: irq 49 for MSI/MSI-X
pcieport 0000:00:03.0: setting latency timer to 64
  alloc irq_desc for 50 on node -1
  alloc kstat_irqs on node -1
pcieport 0000:00:04.0: irq 50 for MSI/MSI-X
pcieport 0000:00:04.0: setting latency timer to 64
  alloc irq_desc for 51 on node -1
  alloc kstat_irqs on node -1
pcieport 0000:00:05.0: irq 51 for MSI/MSI-X
pcieport 0000:00:05.0: setting latency timer to 64
  alloc irq_desc for 52 on node -1
  alloc kstat_irqs on node -1
pcieport 0000:00:06.0: irq 52 for MSI/MSI-X
pcieport 0000:00:06.0: setting latency timer to 64
  alloc irq_desc for 53 on node -1
  alloc kstat_irqs on node -1
pcieport 0000:00:07.0: irq 53 for MSI/MSI-X
pcieport 0000:00:07.0: setting latency timer to 64
  alloc irq_desc for 54 on node -1
  alloc kstat_irqs on node -1
pcieport 0000:0a:00.0: irq 54 for MSI/MSI-X
pcieport 0000:0a:00.0: setting latency timer to 64
  alloc irq_desc for 55 on node -1
  alloc kstat_irqs on node -1
pcieport 0000:0a:01.0: irq 55 for MSI/MSI-X
pcieport 0000:0a:01.0: setting latency timer to 64
  alloc irq_desc for 56 on node -1
  alloc kstat_irqs on node -1
pcieport 0000:0a:02.0: irq 56 for MSI/MSI-X
pcieport 0000:0a:02.0: setting latency timer to 64
aer 0000:00:02.0:pcie02: AER service couldn't init device: no _OSC support
aer 0000:00:03.0:pcie02: AER service couldn't init device: no _OSC support
aer 0000:00:04.0:pcie02: AER service couldn't init device: no _OSC support
aer 0000:00:05.0:pcie02: AER service couldn't init device: no _OSC support
aer 0000:00:06.0:pcie02: AER service couldn't init device: no _OSC support
aer 0000:00:07.0:pcie02: AER service couldn't init device: no _OSC support
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
pci-stub: invalid id string ""
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
ACPI: Power Button [PWRF]
processor LNXCPU:00: registered as cooling_device0
processor LNXCPU:01: registered as cooling_device1
processor LNXCPU:02: registered as cooling_device2
processor LNXCPU:03: registered as cooling_device3
thermal LNXTHERM:01: registered as thermal_zone0
ACPI: Thermal Zone [THM0] (8 C)
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
crash memory driver: version 1.0
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
brd: module loaded
loop: module loaded
input: Macintosh mouse button emulation as /devices/virtual/input/input1
Fixed MDIO Bus: probed
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 16 (level, low) -> IRQ 16
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
ehci_hcd 0000:00:1d.7: irq 16, io mem 0xf7df0000
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.32-71.el6.x86_64 ehci_hcd
usb usb1: SerialNumber: 0000:00:1d.7
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.0: irq 16, io base 0x00001000
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: UHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.32-71.el6.x86_64 uhci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.1: irq 17, io base 0x00001020
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.32-71.el6.x86_64 uhci_hcd
usb usb3: SerialNumber: 0000:00:1d.1
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001040
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 2.6.32-71.el6.x86_64 uhci_hcd
usb usb4: SerialNumber: 0000:00:1d.2
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
  alloc irq_desc for 19 on node -1
  alloc kstat_irqs on node -1
uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
uhci_hcd 0000:00:1d.3: setting latency timer to 64
uhci_hcd 0000:00:1d.3: UHCI Host Controller
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.3: irq 19, io base 0x00001060
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: UHCI Host Controller
usb usb5: Manufacturer: Linux 2.6.32-71.el6.x86_64 uhci_hcd
usb usb5: SerialNumber: 0000:00:1d.3
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
  alloc irq_desc for 22 on node -1
  alloc kstat_irqs on node -1
uhci_hcd 0000:01:04.4: PCI INT B -> GSI 22 (level, low) -> IRQ 22
uhci_hcd 0000:01:04.4: UHCI Host Controller
uhci_hcd 0000:01:04.4: new USB bus registered, assigned bus number 6
uhci_hcd 0000:01:04.4: port count misdetected? forcing to 2 ports
uhci_hcd 0000:01:04.4: irq 22, io base 0x00003800
usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: UHCI Host Controller
usb usb6: Manufacturer: Linux 2.6.32-71.el6.x86_64 uhci_hcd
usb usb6: SerialNumber: 0000:01:04.4
usb usb6: configuration #1 chosen from 1 choice
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
PNP: PS/2 Controller [PNP0303:KBD,PNP0f0e:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
rtc_cmos rtc_cmos: RTC can wake from S4
rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
cpuidle: using governor ladder
cpuidle: using governor menu
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 17
registered taskstats version 1
IMA: No TPM chip found, activating TPM-bypass!
rtc_cmos rtc_cmos: setting system clock to 2011-05-17 03:40:17 UTC (1305603617)
Initalizing network drop monitor service
Freeing unused kernel memory: 1220k freed
Write protecting the kernel read-only data: 7176k
dracut: dracut-004-32.el6
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: dm-devel@redhat.com
udev: starting version 147
[drm] Initialized drm 1.1.0 20060810
[drm] radeon defaulting to kernel modesetting.
[drm] radeon kernel modesetting enabled.
  alloc irq_desc for 23 on node -1
  alloc kstat_irqs on node -1
radeon 0000:01:03.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[drm] initializing kernel modesetting (RV100 0x1002:0x515E).
[drm] register mmio base: 0xF7FF0000
[drm] register mmio size: 65536
radeon 0000:01:03.0: VRAM: 64M 0xD8000000 - 0xDBFFFFFF (32M used)
radeon 0000:01:03.0: GTT: 512M 0xB8000000 - 0xD7FFFFFF
[drm] radeon: irq initialized.
------------[ cut here ]------------
WARNING: at arch/x86/kernel/cpu/mtrr/generic.c:467 generic_get_mtrr+0x11e/0x140() (Not tainted)
Hardware name: ProLiant DL360 G5
mtrr: your BIOS has set up an incorrect mask, fixing it up.
Modules linked in: radeon(+) ttm drm_kms_helper drm i2c_algo_bit i2c_core dm_mod
Pid: 105, comm: modprobe Not tainted 2.6.32-71.el6.x86_64 #1
Call Trace:
 [<ffffffff8106b857>] warn_slowpath_common+0x87/0xc0
 [<ffffffff8106b946>] warn_slowpath_fmt+0x46/0x50
 [<ffffffff8102ba6e>] generic_get_mtrr+0x11e/0x140
 [<ffffffff8102a59b>] mtrr_add_page+0xdb/0x470
 [<ffffffff810d9f64>] ? request_threaded_irq+0x1d4/0x2f0
 [<ffffffff8102a986>] mtrr_add+0x56/0x70
 [<ffffffffa00ceafe>] radeon_bo_init+0x2e/0x90 [radeon]
 [<ffffffffa00ed65f>] r100_init+0xff/0x2c0 [radeon]
 [<ffffffff8131e722>] ? vga_client_register+0x82/0x90
 [<ffffffffa00bad65>] radeon_device_init+0x275/0x370 [radeon]
 [<ffffffffa00bc12f>] radeon_driver_load_kms+0x9f/0x1d0 [radeon]
 [<ffffffffa003f4b8>] drm_get_dev+0x328/0x550 [drm]
 [<ffffffffa012eca8>] radeon_pci_probe+0x15/0x293 [radeon]
 [<ffffffff812765d7>] local_pci_probe+0x17/0x20
 [<ffffffff812777c1>] pci_device_probe+0x101/0x120
 [<ffffffff8132ec52>] ? driver_sysfs_add+0x62/0x90
 [<ffffffff8132edf0>] driver_probe_device+0xa0/0x2a0
 [<ffffffff8132f09b>] __driver_attach+0xab/0xb0
 [<ffffffff8132eff0>] ? __driver_attach+0x0/0xb0
 [<ffffffff8132e054>] bus_for_each_dev+0x64/0x90
 [<ffffffff8132eb8e>] driver_attach+0x1e/0x20
 [<ffffffff8132e490>] bus_add_driver+0x200/0x300
 [<ffffffff8132f3c6>] driver_register+0x76/0x140
 [<ffffffff81277a26>] __pci_register_driver+0x56/0xd0
 [<ffffffff814c7c23>] ? printk+0x41/0x46
 [<ffffffffa0039731>] drm_init+0x111/0x120 [drm]
 [<ffffffffa0166000>] ? radeon_init+0x0/0xc1 [radeon]
 [<ffffffffa01660bf>] radeon_init+0xbf/0xc1 [radeon]
 [<ffffffff8100a04c>] do_one_initcall+0x3c/0x1d0
 [<ffffffff810af5ef>] sys_init_module+0xdf/0x250
 [<ffffffff81013172>] system_call_fastpath+0x16/0x1b
---[ end trace 585ab3544e44d00d ]---
[drm] Detected VRAM RAM=64M, BAR=128M
[drm] RAM width 16bits DDR
[TTM] Zone  kernel: Available graphics memory: 4095246 kiB.
[TTM] Zone   dma32: Available graphics memory: 2097152 kiB.
[drm] radeon: 32M of VRAM memory ready
[drm] radeon: 512M of GTT memory ready.
[drm] GART: num cpu pages 131072, num gpu pages 131072
[drm] Loading R100 Microcode
platform radeon_cp.0: firmware: requesting radeon/R100_cp.bin
[drm] radeon: ring at 0x00000000B8000000
[drm] ring test succeeded in 1 usecs
[drm] radeon: ib pool ready.
[drm] ib test succeeded in 0 usecs
[drm] Radeon Display Connectors
[drm] Connector 0:
[drm]   VGA
[drm]   DDC: 0x60 0x60 0x60 0x60 0x60 0x60 0x60 0x60
[drm]   Encoders:
[drm]     CRT1: INTERNAL_DAC1
[drm] Connector 1:
[drm]   VGA
[drm]   DDC: 0x6c 0x6c 0x6c 0x6c 0x6c 0x6c 0x6c 0x6c
[drm]   Encoders:
[drm]     CRT2: INTERNAL_DAC2
[drm] fb mappable at 0xD8040000
[drm] vram apper at 0xD8000000
[drm] size 786432
[drm] fb depth is 8
[drm]    pitch is 1024
fbcon: radeondrmfb (fb0) is primary device
usb 6-1: new full speed USB device using uhci_hcd and address 2
Console: switching to colour frame buffer device 128x48
fb0: radeondrmfb frame buffer device
drm: registered panic notifier
Slow work thread pool: Starting up
Slow work thread pool: Ready
[drm] Initialized radeon 2.1.0 20080528 for 0000:01:03.0 on minor 0
dracut: Starting plymouth daemon
usb 6-1: New USB device found, idVendor=03f0, idProduct=1027
usb 6-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 6-1: Product: Virtual Keyboard
usb 6-1: Manufacturer: HP
usb 6-1: configuration #1 chosen from 1 choice
input: HP Virtual Keyboard as /devices/pci0000:00/0000:00:1e.0/0000:01:04.4/usb6/6-1/6-1:1.0/input/input2
generic-usb 0003:03F0:1027.0001: input,hidraw0: USB HID v1.01 Keyboard [HP Virtual Keyboard] on usb-0000:01:04.4-1/input0
input: HP Virtual Keyboard as /devices/pci0000:00/0000:00:1e.0/0000:01:04.4/usb6/6-1/6-1:1.1/input/input3
generic-usb 0003:03F0:1027.0002: input,hidraw1: USB HID v1.01 Mouse [HP Virtual Keyboard] on usb-0000:01:04.4-1/input1
HP CISS Driver (v 3.6.26-RH1)
cciss 0000:06:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
  alloc irq_desc for 57 on node -1
  alloc kstat_irqs on node -1
cciss 0000:06:00.0: irq 57 for MSI/MSI-X
  alloc irq_desc for 58 on node -1
  alloc kstat_irqs on node -1
cciss 0000:06:00.0: irq 58 for MSI/MSI-X
  alloc irq_desc for 59 on node -1
  alloc kstat_irqs on node -1
cciss 0000:06:00.0: irq 59 for MSI/MSI-X
  alloc irq_desc for 60 on node -1
  alloc kstat_irqs on node -1
cciss 0000:06:00.0: irq 60 for MSI/MSI-X
usb 6-2: new full speed USB device using uhci_hcd and address 3
IRQ 59/cciss0: IRQF_DISABLED is not guaranteed on shared IRQs
cciss0: <0x3230> at PCI 0000:06:00.0 IRQ 59 using DAC
 cciss/c0d0: p1 p2
ata_piix 0000:00:1f.1: version 2.13
ata_piix 0000:00:1f.1: PCI INT A -> GSI 17 (level, low) -> IRQ 17
ata_piix 0000:00:1f.1: setting latency timer to 64
scsi0 : ata_piix
scsi1 : ata_piix
ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x500 irq 14
ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x508 irq 15
usb 6-2: New USB device found, idVendor=03f0, idProduct=1327
usb 6-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 6-2: Product: Virtual Hub
usb 6-2: Manufacturer: HP
usb 6-2: configuration #1 chosen from 1 choice
hub 6-2:1.0: USB hub found
hub 6-2:1.0: 7 ports detected
dracut: Scanning devices  for LVM logical volumes vg_client/lv_root vg_client/lv_swap 
dracut: inactive '/dev/vg_client/lv_store' [111.75 GiB] inherit
dracut: inactive '/dev/vg_client/lv_root' [14.65 GiB] inherit
dracut: inactive '/dev/vg_client/lv_swap' [9.81 GiB] inherit
EXT4-fs (dm-0): mounted filesystem with ordered data mode
dracut: Mounted root filesystem /dev/mapper/vg_client-lv_root
dracut: Loading SELinux policy
SELinux:  Disabled at runtime.
SELinux:  Unregistering netfilter hooks
type=1404 audit(1305603618.962:2): selinux=0 auid=4294967295 ses=4294967295
dracut: /sbin/load_policy: Can't load policy: No such file or directory
dracut: Switching root
readahead: starting
udev: starting version 147
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
EDAC MC: Ver: 2.1.0 Sep  1 2010
EDAC MC0: Giving out device to 'i5000_edac.c' 'I5000': DEV 0000:00:10.0
EDAC PCI0: Giving out device to module 'i5000_edac' controller 'EDAC PCI controller': DEV '0000:00:10.0' (POLLED)
intel_rng: FWH not detected
iTCO_vendor_support: vendor-support=0
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05
iTCO_wdt: failed to reset NO_REBOOT flag, reboot disabled by hardware
iTCO_wdt: No card detected
Broadcom NetXtreme II Gigabit Ethernet Driver bnx2 v2.0.8-j15 (Feb 15, 2010)
bnx2 0000:03:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
bnx2 0000:03:00.0: firmware: requesting bnx2/bnx2-mips-06-5.0.0.j6.fw
bnx2 0000:03:00.0: firmware: requesting bnx2/bnx2-rv2p-06-5.0.0.j3.fw
eth0: Broadcom NetXtreme II BCM5708 1000Base-T (B2) PCI-X 64-bit 133MHz found at mem f8000000, IRQ 18, node addr 00:21:5a:45:67:ce
bnx2 0000:05:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
bnx2 0000:05:00.0: firmware: requesting bnx2/bnx2-mips-06-5.0.0.j6.fw
bnx2 0000:05:00.0: firmware: requesting bnx2/bnx2-rv2p-06-5.0.0.j3.fw
eth1: Broadcom NetXtreme II BCM5708 1000Base-T (B2) PCI-X 64-bit 133MHz found at mem fa000000, IRQ 19, node addr 00:21:5a:45:67:c8
hpilo 0000:01:04.2: PCI INT B -> GSI 22 (level, low) -> IRQ 22
ipmi message handler version 39.2
IPMI System Interface driver.
  alloc irq_desc for 21 on node -1
  alloc kstat_irqs on node -1
ipmi_si 0000:01:04.6: PCI INT A -> GSI 21 (level, low) -> IRQ 21
ipmi_si: Adding PCI-specified kcs state machine
ipmi_si: Adding SMBIOS-specified kcs state machine
ipmi_si: Adding ACPI-specified kcs state machine: duplicate interface
ipmi_si: Trying PCI-specified kcs state machine at mem address 0xf7ef0000, slave address 0x0, irq 21
IRQ 21/ipmi_si: IRQF_DISABLED is not guaranteed on shared IRQs
  Using irq 21
ipmi: Found new BMC (man_id: 0x00000b,  prod_id: 0x0000, dev_id: 0x11)
IPMI kcs interface initialized
EXT4-fs (cciss!c0d0p1): mounted filesystem with ordered data mode
EXT4-fs (dm-2): mounted filesystem with ordered data mode
Adding 10289144k swap on /dev/mapper/vg_client-lv_swap.  Priority:-1 extents:1 across:10289144k 
