0x0000] (disabled)
pci 0000:80:01.1:   bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:80:01.1:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:80:02.0: PCI bridge to [bus 90-94]
pci 0000:80:02.0:   bridge window [io  0xf000-0x0000] (disabled)
pci 0000:80:02.0:   bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:80:02.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:80:02.2: PCI bridge to [bus 95-99]
pci 0000:80:02.2:   bridge window [io  0xf000-0x0000] (disabled)
pci 0000:80:02.2:   bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:80:02.2:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:80:03.0: PCI bridge to [bus 9a-9e]
pci 0000:80:03.0:   bridge window [io  0xf000-0x0000] (disabled)
pci 0000:80:03.0:   bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:80:03.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci_bus 0000:80: on NUMA node 1 (pxm 1)
ACPI: PCI Interrupt Routing Table [\_SB_.IOH1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.IOH1.MRPE._PRT]
 pci0000:80: Requesting ACPI _OSC control (0x1d)
 pci0000:80: ACPI _OSC control (0x15) granted
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
vgaarb: device added: PCI:0000:04:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:04:00.0
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: old code would have set cacheline size to 32 bytes, but clflush_size = 64
PCI: pci_cache_line_size set to 64 bytes
NetLabel: Initializing
NetLabel:  domain hash size = 128
NetLabel:  protocols = UNLABELED CIPSOv4
NetLabel:  unlabeled traffic allowed by default
  alloc irq_desc for 74 on node 0
  alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
  alloc irq_desc for 75 on node 0
  alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
  alloc irq_desc for 76 on node 0
  alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
  alloc irq_desc for 77 on node 0
  alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
  alloc irq_desc for 78 on node 0
  alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
HPET: 8 timers in total, 5 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 74, 75, 76, 77, 78, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
hpet: hpet2 irq 74 for MSI
hpet: hpet3 irq 75 for MSI
hpet: hpet4 irq 76 for MSI
hpet: hpet5 irq 77 for MSI
hpet: hpet6 irq 78 for MSI
Switching to clocksource hpet
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: [io  0x0cf8-0x0cff]
pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
pnp 00:01: [mem 0xfec00000-0xfecfffff]
pnp 00:01: Plug and Play ACPI device, IDs PNP0003 (active)
pnp 00:02: [io  0x0000-0x000f]
pnp 00:02: [io  0x0081-0x0083]
pnp 00:02: [io  0x0087]
pnp 00:02: [io  0x0089-0x008b]
pnp 00:02: [io  0x008f]
pnp 00:02: [io  0x00c0-0x00df]
pnp 00:02: [dma 4]
pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:03: [io  0x0070-0x0071]
pnp 00:03: [io  0x0074-0x0077]
pnp 00:03: [irq 8]
pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:04: [io  0x00f0]
pnp 00:04: [irq 13]
pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:05: [io  0x0061]
pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:06: [mem 0xfed00000-0xfed003ff]
pnp 00:06: Plug and Play ACPI device, IDs PNP0103 (active)
pnp 00:07: [io  0x0500-0x053f]
pnp 00:07: [io  0x0400-0x047f]
pnp 00:07: [io  0x0092]
pnp 00:07: [io  0x0010-0x001f]
pnp 00:07: [io  0x0072-0x0073]
pnp 00:07: [io  0x0080]
pnp 00:07: [io  0x0084-0x0086]
pnp 00:07: [io  0x0088]
pnp 00:07: [io  0x008c-0x008e]
pnp 00:07: [io  0x0090-0x009f]
pnp 00:07: [io  0x0800-0x081f]
pnp 00:07: [mem 0xfed1c000-0xfed8bffe]
pnp 00:07: [mem 0xff000000-0xffffffff]
pnp 00:07: [mem 0xfee00000-0xfeefffff]
pnp 00:07: [mem 0xfed1b000-0xfed1bfff]
pnp 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:08: [io  0x0cc0]
pnp 00:08: [io  0x0cc1]
pnp 00:08: Plug and Play ACPI device, IDs IPI0001 PNP0c02 (active)
pnp 00:09: [io  0x0c80-0x0c9f]
pnp 00:09: [io  0x0cc2-0x0cc3]
pnp 00:09: [io  0x0ca0-0x0caf]
pnp 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0a: [io  0x03f8-0x03ff]
pnp 00:0a: [irq 4]
pnp 00:0a: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:0b: [io  0x02f8-0x02ff]
pnp 00:0b: [irq 3]
pnp 00:0b: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:0c: [io  0x004e-0x004f]
pnp 00:0c: [io  0x0820-0x082b]
pnp 00:0c: [mem 0xfed40000-0xfed44fff]
pnp 00:0c: Plug and Play ACPI device, IDs PNP0c31 (active)
pnp 00:0d: [io  0x0cb0-0x0cbf]
pnp 00:0d: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0e: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
pnp 00:0f: [mem 0xfbff8000-0xfbffafff]
pnp 00:0f: [mem 0xc3ff8000-0xc3ffafff]
pnp 00:0f: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 16 devices
ACPI: ACPI bus type pnp unregistered
system 00:07: [io  0x0500-0x053f] has been reserved
system 00:07: [io  0x0400-0x047f] has been reserved
system 00:07: [io  0x0800-0x081f] has been reserved
system 00:07: [mem 0xfed1c000-0xfed8bffe] could not be reserved
system 00:07: [mem 0xff000000-0xffffffff] could not be reserved
system 00:07: [mem 0xfee00000-0xfeefffff] has been reserved
system 00:07: [mem 0xfed1b000-0xfed1bfff] has been reserved
system 00:08: [io  0x0cc0] has been reserved
system 00:08: [io  0x0cc1] has been reserved
system 00:09: [io  0x0c80-0x0c9f] has been reserved
system 00:09: [io  0x0cc2-0x0cc3] has been reserved
system 00:09: [io  0x0ca0-0x0caf] has been reserved
system 00:0d: [io  0x0cb0-0x0cbf] has been reserved
system 00:0f: [mem 0xfbff8000-0xfbffafff] could not be reserved
system 00:0f: [mem 0xc3ff8000-0xc3ffafff] could not be reserved
pci 0000:11:00.0: no compatible bridge window for [mem 0xfffc0000-0xffffffff pref]
pci 0000:11:00.1: no compatible bridge window for [mem 0xfffc0000-0xffffffff pref]
pci 0000:16:00.0: no compatible bridge window for [mem 0xfffc0000-0xffffffff pref]
pci 0000:16:00.1: no compatible bridge window for [mem 0xfffc0000-0xffffffff pref]
pci 0000:16:00.2: no compatible bridge window for [mem 0xfffc0000-0xffffffff pref]
pci 0000:16:00.3: no compatible bridge window for [mem 0xfffc0000-0xffffffff pref]
pci 0000:1b:00.0: no compatible bridge window for [mem 0xfffc0000-0xffffffff pref]
pci 0000:1b:00.1: no compatible bridge window for [mem 0xfffc0000-0xffffffff pref]
pci 0000:20:00.0: no compatible bridge window for [mem 0xfffc0000-0xffffffff pref]
pci 0000:20:00.1: no compatible bridge window for [mem 0xfffc0000-0xffffffff pref]
pci 0000:20:00.2: no compatible bridge window for [mem 0xfffc0000-0xffffffff pref]
pci 0000:20:00.3: no compatible bridge window for [mem 0xfffc0000-0xffffffff pref]
pci 0000:06:00.0: no compatible bridge window for [mem 0xfff80000-0xffffffff pref]
PCI: max bus depth: 4 pci_try_num: 5
pci 0000:00:02.0: BAR 15: assigned [mem 0xc6900000-0xc69fffff pref]
pci 0000:00:02.2: BAR 15: assigned [mem 0xc6a00000-0xc6afffff pref]
pci 0000:00:03.0: BAR 15: assigned [mem 0xc6b00000-0xc6bfffff pref]
pci 0000:00:03.2: BAR 15: assigned [mem 0xc6c00000-0xc6cfffff pref]
pci 0000:00:1c.4: BAR 15: assigned [mem 0xc6d00000-0xc6dfffff pref]
pci 0000:00:01.0: PCI bridge to [bus 0c-10]
pci 0000:00:01.0: PCI bridge to [bus 0c-10]
pci 0000:00:01.0:   bridge window [io  disabled]
pci 0000:00:01.0:   bridge window [mem disabled]
pci 0000:00:01.0:   bridge window [mem pref disabled]
pci 0000:11:00.0: reg 1a4: [mem 0xc6684000-0xc6687fff 64bit]
pci 0000:11:00.0: reg 1a4: [mem 0xc6684000-0xc6687fff 64bit]
pci 0000:11:00.1: reg 1a4: [mem 0xc6708000-0xc670bfff 64bit]
pci 0000:11:00.0: reg 1a4: [mem 0xc6684000-0xc6687fff 64bit]
pci 0000:11:00.0: BAR 6: assigned [mem 0xc6900000-0xc693ffff pref]
pci 0000:11:00.1: BAR 6: assigned [mem 0xc6940000-0xc697ffff pref]
pci 0000:11:00.0: reg 1a4: [mem 0xc6684000-0xc6687fff 64bit]
pci 0000:11:00.0: reg 1a4: [mem 0xc6684000-0xc6687fff 64bit]
pci 0000:11:00.0: BAR 7: assigned [mem 0xc6684000-0xc6703fff 64bit]
pci 0000:11:00.0: BAR 7: set to [mem 0xc6684000-0xc6703fff 64bit] (PCI address [0xc6684000-0xc6703fff]
pci 0000:11:00.1: reg 1a4: [mem 0xc6708000-0xc670bfff 64bit]
pci 0000:11:00.1: reg 1a4: [mem 0xc6708000-0xc670bfff 64bit]
pci 0000:11:00.1: BAR 7: assigned [mem 0xc6708000-0xc6787fff 64bit]
pci 0000:11:00.1: BAR 7: set to [mem 0xc6708000-0xc6787fff 64bit] (PCI address [0xc6708000-0xc6787fff]
pci 0000:00:02.0: PCI bridge to [bus 11-15]
pci 0000:00:02.0: PCI bridge to [bus 11-15]
pci 0000:00:02.0:   bridge window [io  disabled]
pci 0000:00:02.0:   bridge window [mem 0xc6600000-0xc67fffff]
pci 0000:00:02.0:   bridge window [mem 0xc6900000-0xc69fffff pref]
pci 0000:16:00.0: BAR 6: assigned [mem 0xc6a00000-0xc6a3ffff pref]
pci 0000:16:00.1: BAR 6: assigned [mem 0xc6a40000-0xc6a7ffff pref]
pci 0000:16:00.2: BAR 6: assigned [mem 0xc6a80000-0xc6abffff pref]
pci 0000:16:00.3: BAR 6: assigned [mem 0xc6ac0000-0xc6afffff pref]
pci 0000:00:02.2: PCI bridge to [bus 16-1a]
pci 0000:00:02.2: PCI bridge to [bus 16-1a]
pci 0000:00:02.2:   bridge window [io  disabled]
pci 0000:00:02.2:   bridge window [mem 0xc6400000-0xc65fffff]
pci 0000:00:02.2:   bridge window [mem 0xc6a00000-0xc6afffff pref]
pci 0000:1b:00.0: reg 1a4: [mem 0xc6284000-0xc6287fff 64bit]
pci 0000:1b:00.0: reg 1a4: [mem 0xc6284000-0xc6287fff 64bit]
pci 0000:1b:00.1: reg 1a4: [mem 0xc6308000-0xc630bfff 64bit]
pci 0000:1b:00.0: reg 1a4: [mem 0xc6284000-0xc6287fff 64bit]
pci 0000:1b:00.0: BAR 6: assigned [mem 0xc6b00000-0xc6b3ffff pref]
pci 0000:1b:00.1: BAR 6: assigned [mem 0xc6b40000-0xc6b7ffff pref]
pci 0000:1b:00.0: reg 1a4: [mem 0xc6284000-0xc6287fff 64bit]
pci 0000:1b:00.0: reg 1a4: [mem 0xc6284000-0xc6287fff 64bit]
pci 0000:1b:00.0: BAR 7: assigned [mem 0xc6284000-0xc6303fff 64bit]
pci 0000:1b:00.0: BAR 7: set to [mem 0xc6284000-0xc6303fff 64bit] (PCI address [0xc6284000-0xc6303fff]
pci 0000:1b:00.1: reg 1a4: [mem 0xc6308000-0xc630bfff 64bit]
pci 0000:1b:00.1: reg 1a4: [mem 0xc6308000-0xc630bfff 64bit]
pci 0000:1b:00.1: BAR 7: assigned [mem 0xc6308000-0xc6387fff 64bit]
pci 0000:1b:00.1: BAR 7: set to [mem 0xc6308000-0xc6387fff 64bit] (PCI address [0xc6308000-0xc6387fff]
pci 0000:00:03.0: PCI bridge to [bus 1b-1f]
pci 0000:00:03.0: PCI bridge to [bus 1b-1f]
pci 0000:00:03.0:   bridge window [io  disabled]
pci 0000:00:03.0:   bridge window [mem 0xc6200000-0xc63fffff]
pci 0000:00:03.0:   bridge window [mem 0xc6b00000-0xc6bfffff pref]
pci 0000:20:00.0: BAR 6: assigned [mem 0xc6c00000-0xc6c3ffff pref]
pci 0000:20:00.1: BAR 6: assigned [mem 0xc6c40000-0xc6c7ffff pref]
pci 0000:20:00.2: BAR 6: assigned [mem 0xc6c80000-0xc6cbffff pref]
pci 0000:20:00.3: BAR 6: assigned [mem 0xc6cc0000-0xc6cfffff pref]
pci 0000:00:03.2: PCI bridge to [bus 20-24]
pci 0000:00:03.2: PCI bridge to [bus 20-24]
pci 0000:00:03.2:   bridge window [io  disabled]
pci 0000:00:03.2:   bridge window [mem 0xc6000000-0xc61fffff]
pci 0000:00:03.2:   bridge window [mem 0xc6c00000-0xc6cfffff pref]
pci 0000:00:11.0: PCI bridge to [bus 25-25]
pci 0000:00:11.0: PCI bridge to [bus 25-25]
pci 0000:00:11.0:   bridge window [io  0x2000-0x2fff]
pci 0000:00:11.0:   bridge window [mem 0xc5f00000-0xc5ffffff]
pci 0000:00:11.0:   bridge window [mem pref disabled]
pci 0000:03:00.0: PCI bridge to [bus 04-04]
pci 0000:03:00.0: PCI bridge to [bus 04-04]
pci 0000:03:00.0:   bridge window [io  disabled]
pci 0000:03:00.0:   bridge window [mem 0xc5000000-0xc58fffff]
pci 0000:03:00.0:   bridge window [mem 0xc4000000-0xc4ffffff 64bit pref]
pci 0000:02:00.0: PCI bridge to [bus 03-04]
pci 0000:02:00.0: PCI bridge to [bus 03-04]
pci 0000:02:00.0:   bridge window [io  disabled]
pci 0000:02:00.0:   bridge window [mem 0xc5000000-0xc58fffff]
pci 0000:02:00.0:   bridge window [mem 0xc4000000-0xc4ffffff 64bit pref]
pci 0000:02:01.0: PCI bridge to [bus 05-05]
pci 0000:02:01.0: PCI bridge to [bus 05-05]
pci 0000:02:01.0:   bridge window [io  disabled]
pci 0000:02:01.0:   bridge window [mem 0xc5900000-0xc59fffff]
pci 0000:02:01.0:   bridge window [mem pref disabled]
pci 0000:01:00.0: PCI bridge to [bus 02-05]
pci 0000:01:00.0: PCI bridge to [bus 02-05]
pci 0000:01:00.0:   bridge window [io  disabled]
pci 0000:01:00.0:   bridge window [mem 0xc5000000-0xc59fffff]
pci 0000:01:00.0:   bridge window [mem 0xc4000000-0xc4ffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 01-05]
pci 0000:00:1c.0: PCI bridge to [bus 01-05]
pci 0000:00:1c.0:   bridge window [io  disabled]
pci 0000:00:1c.0:   bridge window [mem 0xc5000000-0xc59fffff]
pci 0000:00:1c.0:   bridge window [mem 0xc4000000-0xc4ffffff 64bit pref]
pci 0000:06:00.0: reg 174: [mem 0xc5e44000-0xc5e47fff 64bit]
pci 0000:06:00.0: reg 17c: [mem 0xc5a40000-0xc5a7ffff 64bit]
pci 0000:06:00.0: reg 174: [mem 0xc5e44000-0xc5e47fff 64bit]
pci 0000:06:00.0: BAR 6: assigned [mem 0xc6d00000-0xc6d7ffff pref]
pci 0000:06:00.0: reg 17c: [mem 0xc5a40000-0xc5a7ffff 64bit]
pci 0000:06:00.0: reg 17c: [mem 0xc5a40000-0xc5a7ffff 64bit]
pci 0000:06:00.0: BAR 9: assigned [mem 0xc5a40000-0xc5e3ffff 64bit]
pci 0000:06:00.0: BAR 9: set to [mem 0xc5a40000-0xc5e3ffff 64bit] (PCI address [0xc5a40000-0xc5e3ffff]
pci 0000:06:00.0: reg 174: [mem 0xc5e44000-0xc5e47fff 64bit]
pci 0000:06:00.0: reg 174: [mem 0xc5e44000-0xc5e47fff 64bit]
pci 0000:06:00.0: BAR 7: assigned [mem 0xc5e44000-0xc5e83fff 64bit]
pci 0000:06:00.0: BAR 7: set to [mem 0xc5e44000-0xc5e83fff 64bit] (PCI address [0xc5e44000-0xc5e83fff]
pci 0000:00:1c.4: PCI bridge to [bus 06-07]
pci 0000:00:1c.4: PCI bridge to [bus 06-07]
pci 0000:00:1c.4:   bridge window [io  0x1000-0x1fff]
pci 0000:00:1c.4:   bridge window [mem 0xc5a00000-0xc5efffff]
pci 0000:00:1c.4:   bridge window [mem 0xc6d00000-0xc6dfffff pref]
pci 0000:00:1e.0: PCI bridge to [bus 26-26]
pci 0000:00:1e.0: PCI bridge to [bus 26-26]
pci 0000:00:1e.0:   bridge window [io  disabled]
pci 0000:00:1e.0:   bridge window [mem disabled]
pci 0000:00:1e.0:   bridge window [mem pref disabled]
pci 0000:80:00.0: PCI bridge to [bus 81-85]
pci 0000:80:00.0: PCI bridge to [bus 81-85]
pci 0000:80:00.0:   bridge window [io  disabled]
pci 0000:80:00.0:   bridge window [mem disabled]
pci 0000:80:00.0:   bridge window [mem pref disabled]
pci 0000:80:01.0: PCI bridge to [bus 86-8a]
pci 0000:80:01.0: PCI bridge to [bus 86-8a]
pci 0000:80:01.0:   bridge window [io  disabled]
pci 0000:80:01.0:   bridge window [mem disabled]
pci 0000:80:01.0:   bridge window [mem pref disabled]
pci 0000:80:01.1: PCI bridge to [bus 8b-8f]
pci 0000:80:01.1: PCI bridge to [bus 8b-8f]
pci 0000:80:01.1:   bridge window [io  disabled]
pci 0000:80:01.1:   bridge window [mem disabled]
pci 0000:80:01.1:   bridge window [mem pref disabled]
pci 0000:80:02.0: PCI bridge to [bus 90-94]
pci 0000:80:02.0: PCI bridge to [bus 90-94]
pci 0000:80:02.0:   bridge window [io  disabled]
pci 0000:80:02.0:   bridge window [mem disabled]
pci 0000:80:02.0:   bridge window [mem pref disabled]
pci 0000:80:02.2: PCI bridge to [bus 95-99]
pci 0000:80:02.2: PCI bridge to [bus 95-99]
pci 0000:80:02.2:   bridge window [io  disabled]
pci 0000:80:02.2:   bridge window [mem disabled]
pci 0000:80:02.2:   bridge window [mem pref disabled]
pci 0000:80:03.0: PCI bridge to [bus 9a-9e]
pci 0000:80:03.0: PCI bridge to [bus 9a-9e]
pci 0000:80:03.0:   bridge window [io  disabled]
pci 0000:80:03.0:   bridge window [mem disabled]
pci 0000:80:03.0:   bridge window [mem pref disabled]
  alloc irq_desc for 26 on node 0
  alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
pci 0000:00:01.0: PCI INT A -> GSI 26 (level, low) -> IRQ 26
pci 0000:00:01.0: setting latency timer to 64
  alloc irq_desc for 32 on node 0
  alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
pci 0000:00:02.0: PCI INT A -> GSI 32 (level, low) -> IRQ 32
pci 0000:00:02.0: setting latency timer to 64
pci 0000:00:02.2: PCI INT A -> GSI 32 (level, low) -> IRQ 32
pci 0000:00:02.2: setting latency timer to 64
  alloc irq_desc for 40 on node 0
  alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
pci 0000:00:03.0: PCI INT A -> GSI 40 (level, low) -> IRQ 40
pci 0000:00:03.0: setting latency timer to 64
pci 0000:00:03.2: PCI INT A -> GSI 40 (level, low) -> IRQ 40
pci 0000:00:03.2: setting latency timer to 64
  alloc irq_desc for 16 on node 0
  alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
pci 0000:00:11.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:11.0: setting latency timer to 64
pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.0: setting latency timer to 64
pci 0000:01:00.0: setting latency timer to 64
pci 0000:02:00.0: setting latency timer to 64
pci 0000:03:00.0: setting latency timer to 64
pci 0000:02:01.0: enabling device (0000 -> 0002)
pci 0000:02:01.0: setting latency timer to 64
pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.4: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
  alloc irq_desc for 48 on node 1
  alloc kstat_irqs on node 1
alloc irq_2_iommu on node 1
pci 0000:80:00.0: PCI INT A -> GSI 48 (level, low) -> IRQ 48
pci 0000:80:00.0: setting latency timer to 64
  alloc irq_desc for 50 on node 1
  alloc kstat_irqs on node 1
alloc irq_2_iommu on node 1
pci 0000:80:01.0: PCI INT A -> GSI 50 (level, low) -> IRQ 50
pci 0000:80:01.0: setting latency timer to 64
pci 0000:80:01.1: PCI INT A -> GSI 50 (level, low) -> IRQ 50
pci 0000:80:01.1: setting latency timer to 64
  alloc irq_desc for 56 on node 1
  alloc kstat_irqs on node 1
alloc irq_2_iommu on node 1
pci 0000:80:02.0: PCI INT A -> GSI 56 (level, low) -> IRQ 56
pci 0000:80:02.0: setting latency timer to 64
pci 0000:80:02.2: PCI INT A -> GSI 56 (level, low) -> IRQ 56
pci 0000:80:02.2: setting latency timer to 64
  alloc irq_desc for 64 on node 1
  alloc kstat_irqs on node 1
alloc irq_2_iommu on node 1
pci 0000:80:03.0: PCI INT A -> GSI 64 (level, low) -> IRQ 64
pci 0000:80:03.0: setting latency timer to 64
pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io  0x1000-0xbfff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0xfed40000-0xfedfffff]
pci_bus 0000:00: resource 8 [mem 0xc4000000-0xfbff7fff]
pci_bus 0000:00: resource 9 [mem 0x3c0000000000-0x3c007fffffff]
pci_bus 0000:00: resource 10 [mem 0x3c0080000000-0x3c00ffffffff]
pci_bus 0000:00: resource 11 [mem 0x3c0100000000-0x3c017fffffff]
pci_bus 0000:00: resource 12 [mem 0x3c0180000000-0x3c01ffffffff]
pci_bus 0000:00: resource 13 [mem 0x3c0200000000-0x3c027fffffff]
pci_bus 0000:00: resource 14 [mem 0x3c0280000000-0x3c02ffffffff]
pci_bus 0000:00: resource 15 [mem 0x3c0300000000-0x3c037fffffff]
pci_bus 0000:00: resource 16 [mem 0x3c0380000000-0x3c03ffffffff]
pci_bus 0000:00: resource 17 [mem 0x3c0400000000-0x3c047fffffff]
pci_bus 0000:00: resource 18 [mem 0x3c0480000000-0x3c04ffffffff]
pci_bus 0000:00: resource 19 [mem 0x3c0500000000-0x3c057fffffff]
pci_bus 0000:00: resource 20 [mem 0x3c0580000000-0x3c05ffffffff]
pci_bus 0000:00: resource 21 [mem 0x3c0600000000-0x3c067fffffff]
pci_bus 0000:00: resource 22 [mem 0x3c0680000000-0x3c06ffffffff]
pci_bus 0000:00: resource 23 [mem 0x3c0700000000-0x3c077fffffff]
pci_bus 0000:00: resource 24 [mem 0x3c0780000000-0x3c07ffffffff]
pci_bus 0000:11: resource 1 [mem 0xc6600000-0xc67fffff]
pci_bus 0000:11: resource 2 [mem 0xc6900000-0xc69fffff pref]
pci_bus 0000:16: resource 1 [mem 0xc6400000-0xc65fffff]
pci_bus 0000:16: resource 2 [mem 0xc6a00000-0xc6afffff pref]
pci_bus 0000:1b: resource 1 [mem 0xc6200000-0xc63fffff]
pci_bus 0000:1b: resource 2 [mem 0xc6b00000-0xc6bfffff pref]
pci_bus 0000:20: resource 1 [mem 0xc6000000-0xc61fffff]
pci_bus 0000:20: resource 2 [mem 0xc6c00000-0xc6cfffff pref]
pci_bus 0000:25: resource 0 [io  0x2000-0x2fff]
pci_bus 0000:25: resource 1 [mem 0xc5f00000-0xc5ffffff]
pci_bus 0000:01: resource 1 [mem 0xc5000000-0xc59fffff]
pci_bus 0000:01: resource 2 [mem 0xc4000000-0xc4ffffff 64bit pref]
pci_bus 0000:02: resource 1 [mem 0xc5000000-0xc59fffff]
pci_bus 0000:02: resource 2 [mem 0xc4000000-0xc4ffffff 64bit pref]
pci_bus 0000:03: resource 1 [mem 0xc5000000-0xc58fffff]
pci_bus 0000:03: resource 2 [mem 0xc4000000-0xc4ffffff 64bit pref]
pci_bus 0000:04: resource 1 [mem 0xc5000000-0xc58fffff]
pci_bus 0000:04: resource 2 [mem 0xc4000000-0xc4ffffff 64bit pref]
pci_bus 0000:05: resource 1 [mem 0xc5900000-0xc59fffff]
pci_bus 0000:06: resource 0 [io  0x1000-0x1fff]
pci_bus 0000:06: resource 1 [mem 0xc5a00000-0xc5efffff]
pci_bus 0000:06: resource 2 [mem 0xc6d00000-0xc6dfffff pref]
pci_bus 0000:26: resource 4 [io  0x0000-0x0cf7]
pci_bus 0000:26: resource 5 [io  0x1000-0xbfff]
pci_bus 0000:26: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:26: resource 7 [mem 0xfed40000-0xfedfffff]
pci_bus 0000:26: resource 8 [mem 0xc4000000-0xfbff7fff]
pci_bus 0000:26: resource 9 [mem 0x3c0000000000-0x3c007fffffff]
pci_bus 0000:26: resource 10 [mem 0x3c0080000000-0x3c00ffffffff]
pci_bus 0000:26: resource 11 [mem 0x3c0100000000-0x3c017fffffff]
pci_bus 0000:26: resource 12 [mem 0x3c0180000000-0x3c01ffffffff]
pci_bus 0000:26: resource 13 [mem 0x3c0200000000-0x3c027fffffff]
pci_bus 0000:26: resource 14 [mem 0x3c0280000000-0x3c02ffffffff]
pci_bus 0000:26: resource 15 [mem 0x3c0300000000-0x3c037fffffff]
pci_bus 0000:26: resource 16 [mem 0x3c0380000000-0x3c03ffffffff]
pci_bus 0000:26: resource 17 [mem 0x3c0400000000-0x3c047fffffff]
pci_bus 0000:26: resource 18 [mem 0x3c0480000000-0x3c04ffffffff]
pci_bus 0000:26: resource 19 [mem 0x3c0500000000-0x3c057fffffff]
pci_bus 0000:26: resource 20 [mem 0x3c0580000000-0x3c05ffffffff]
pci_bus 0000:26: resource 21 [mem 0x3c0600000000-0x3c067fffffff]
pci_bus 0000:26: resource 22 [mem 0x3c0680000000-0x3c06ffffffff]
pci_bus 0000:26: resource 23 [mem 0x3c0700000000-0x3c077fffffff]
pci_bus 0000:26: resource 24 [mem 0x3c0780000000-0x3c07ffffffff]
pci_bus 0000:80: resource 4 [io  0xc000-0xffff]
pci_bus 0000:80: resource 5 [mem 0x90000000-0xc3ff7fff]
pci_bus 0000:80: resource 6 [mem 0x3c0800000000-0x3c087fffffff]
pci_bus 0000:80: resource 7 [mem 0x3c0880000000-0x3c08ffffffff]
pci_bus 0000:80: resource 8 [mem 0x3c0900000000-0x3c097fffffff]
pci_bus 0000:80: resource 9 [mem 0x3c0980000000-0x3c09ffffffff]
pci_bus 0000:80: resource 10 [mem 0x3c0a00000000-0x3c0a7fffffff]
pci_bus 0000:80: resource 11 [mem 0x3c0a80000000-0x3c0affffffff]
pci_bus 0000:80: resource 12 [mem 0x3c0b00000000-0x3c0b7fffffff]
pci_bus 0000:80: resource 13 [mem 0x3c0b80000000-0x3c0bffffffff]
pci_bus 0000:80: resource 14 [mem 0x3c0c00000000-0x3c0c7fffffff]
pci_bus 0000:80: resource 15 [mem 0x3c0c80000000-0x3c0cffffffff]
pci_bus 0000:80: resource 16 [mem 0x3c0d00000000-0x3c0d7fffffff]
pci_bus 0000:80: resource 17 [mem 0x3c0d80000000-0x3c0dffffffff]
pci_bus 0000:80: resource 18 [mem 0x3c0e00000000-0x3c0e7fffffff]
pci_bus 0000:80: resource 19 [mem 0x3c0e80000000-0x3c0effffffff]
pci_bus 0000:80: resource 20 [mem 0x3c0f00000000-0x3c0f7fffffff]
pci_bus 0000:80: resource 21 [mem 0x3c0f80000000-0x3c0fffffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 524288 (order: 10, 4194304 bytes)
TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP reno registered
NET: Registered protocol family 1
pci 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1a.0: PCI INT A disabled
  alloc irq_desc for 23 on node 0
  alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
pci 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
pci 0000:00:1d.0: PCI INT A disabled
pci 0000:04:00.0: Boot video device
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 16150k freed
dmar: Unsupported device scope
IOMMU 0xc3ff8000: using Queued invalidation
IOMMU 0xfbff8000: using Queued invalidation
IOMMU: hardware identity mapping for device 0000:00:00.0
IOMMU: hardware identity mapping for device 0000:00:01.0
IOMMU: hardware identity mapping for device 0000:00:02.0
IOMMU: hardware identity mapping for device 0000:00:02.2
IOMMU: hardware identity mapping for device 0000:00:03.0
IOMMU: hardware identity mapping for device 0000:00:03.2
IOMMU: hardware identity mapping for device 0000:00:04.0
IOMMU: hardware identity mapping for device 0000:00:04.1
IOMMU: hardware identity mapping for device 0000:00:04.2
IOMMU: hardware identity mapping for device 0000:00:04.3
IOMMU: hardware identity mapping for device 0000:00:04.4
IOMMU: hardware identity mapping for device 0000:00:04.5
IOMMU: hardware identity mapping for device 0000:00:04.6
IOMMU: hardware identity mapping for device 0000:00:04.7
IOMMU: hardware identity mapping for device 0000:00:05.0
IOMMU: hardware identity mapping for device 0000:00:05.2
IOMMU: hardware identity mapping for device 0000:00:11.0
IOMMU: hardware identity mapping for device 0000:00:1a.0
IOMMU: hardware identity mapping for device 0000:00:1c.0
IOMMU: hardware identity mapping for device 0000:00:1c.4
IOMMU: hardware identity mapping for device 0000:00:1d.0
IOMMU: hardware identity mapping for device 0000:00:1f.0
IOMMU: hardware identity mapping for device 0000:00:1f.3
IOMMU: hardware identity mapping for device 0000:11:00.0
IOMMU: hardware identity mapping for device 0000:11:00.1
IOMMU: hardware identity mapping for device 0000:16:00.0
IOMMU: hardware identity mapping for device 0000:16:00.1
IOMMU: hardware identity mapping for device 0000:16:00.2
IOMMU: hardware identity mapping for device 0000:16:00.3
IOMMU: hardware identity mapping for device 0000:1b:00.0
IOMMU: hardware identity mapping for device 0000:1b:00.1
IOMMU: hardware identity mapping for device 0000:20:00.0
IOMMU: hardware identity mapping for device 0000:20:00.1
IOMMU: hardware identity mapping for device 0000:20:00.2
IOMMU: hardware identity mapping for device 0000:20:00.3
IOMMU: hardware identity mapping for device 0000:01:00.0
IOMMU: hardware identity mapping for device 0000:02:00.0
IOMMU: hardware identity mapping for device 0000:02:01.0
IOMMU: hardware identity mapping for device 0000:06:00.0
IOMMU: hardware identity mapping for device 0000:80:00.0
IOMMU: hardware identity mapping for device 0000:80:01.0
IOMMU: hardware identity mapping for device 0000:80:01.1
IOMMU: hardware identity mapping for device 0000:80:02.0
IOMMU: hardware identity mapping for device 0000:80:02.2
IOMMU: hardware identity mapping for device 0000:80:03.0
IOMMU: hardware identity mapping for device 0000:80:04.0
IOMMU: hardware identity mapping for device 0000:80:04.1
IOMMU: hardware identity mapping for device 0000:80:04.2
IOMMU: hardware identity mapping for device 0000:80:04.3
IOMMU: hardware identity mapping for device 0000:80:04.4
IOMMU: hardware identity mapping for device 0000:80:04.5
IOMMU: hardware identity mapping for device 0000:80:04.6
IOMMU: hardware identity mapping for device 0000:80:04.7
IOMMU: hardware identity mapping for device 0000:80:05.0
IOMMU: hardware identity mapping for device 0000:80:05.2
IOMMU: Setting RMRR:
Ignoring identity map for HW passthrough device 0000:00:1d.0 [0x7e600000 - 0x7e680000]
Ignoring identity map for HW passthrough device 0000:00:1a.0 [0x7e600000 - 0x7e680000]
IOMMU: Prepare 0-16MiB unity mapping for LPC
Ignoring identity map for HW passthrough device 0000:00:1f.0 [0x0 - 0x1000000]
PCI-DMA: Intel(R) Virtualization Technology for Directed I/O
audit: initializing netlink socket (disabled)
type=2000 audit(1363636381.830:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 32768
alg: No test for stdrng (krng)
ksign: Installing public key data
Loading keyring
- Added public key DB6BC3CB5AEBCDD6
- User ID: Red Hat, Inc. (Kernel Module GPG key)
- Added public key D4A26C9CCD09BEDA
- User ID: Red Hat Enterprise Linux Driver Update Program <secalert@redhat.com>
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered (default)
io scheduler cfq registered
pcieport 0000:00:01.0: setting latency timer to 64
  alloc irq_desc for 79 on node 0
  alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
pcieport 0000:00:01.0: irq 79 for MSI/MSI-X
32bit 0000:00:01.0 uses non-identity mapping
pcieport 0000:00:02.0: setting latency timer to 64
  alloc irq_desc for 80 on node 0
  alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
pcieport 0000:00:02.0: irq 80 for MSI/MSI-X
32bit 0000:00:02.0 uses non-identity mapping
pcieport 0000:00:02.2: setting latency timer to 64
  alloc irq_desc for 81 on node 0
  alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
pcieport 0000:00:02.2: irq 81 for MSI/MSI-X
32bit 0000:00:02.2 uses non-identity mapping
pcieport 0000:00:03.0: setting latency timer to 64
  alloc irq_desc for 82 on node 0
  alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
pcieport 0000:00:03.0: irq 82 for MSI/MSI-X
32bit 0000:00:03.0 uses non-identity mapping
pcieport 0000:00:03.2: setting latency timer to 64
  alloc irq_desc for 83 on node 0
  alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
pcieport 0000:00:03.2: irq 83 for MSI/MSI-X
32bit 0000:00:03.2 uses non-identity mapping
pcieport 0000:00:11.0: setting latency timer to 64
  alloc irq_desc for 84 on node 0
  alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
pcieport 0000:00:11.0: irq 84 for MSI/MSI-X
32bit 0000:00:11.0 uses non-identity mapping
pcieport 0000:00:1c.0: setting latency timer to 64
  alloc irq_desc for 85 on node 0
  alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
pcieport 0000:00:1c.0: irq 85 for MSI/MSI-X
32bit 0000:00:1c.0 uses non-identity mapping
pcieport 0000:00:1c.4: setting latency timer to 64
  alloc irq_desc for 86 on node 0
  alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
pcieport 0000:00:1c.4: irq 86 for MSI/MSI-X
32bit 0000:00:1c.4 uses non-identity mapping
pcieport 0000:80:00.0: setting latency timer to 64
  alloc irq_desc for 87 on node 1
  alloc kstat_irqs on node 1
alloc irq_2_iommu on node 1
pcieport 0000:80:00.0: irq 87 for MSI/MSI-X
32bit 0000:80:00.0 uses non-identity mapping
pcieport 0000:80:01.0: setting latency timer to 64
  alloc irq_desc for 88 on node 1
  alloc kstat_irqs on node 1
alloc irq_2_iommu on node 1
pcieport 0000:80:01.0: irq 88 for MSI/MSI-X
32bit 0000:80:01.0 uses non-identity mapping
pcieport 0000:80:01.1: setting latency timer to 64
  alloc irq_desc for 89 on node 1
  alloc kstat_irqs on node 1
alloc irq_2_iommu on node 1
pcieport 0000:80:01.1: irq 89 for MSI/MSI-X
32bit 0000:80:01.1 uses non-identity mapping
pcieport 0000:80:02.0: setting latency timer to 64
  alloc irq_desc for 90 on node 1
  alloc kstat_irqs on node 1
alloc irq_2_iommu on node 1
pcieport 0000:80:02.0: irq 90 for MSI/MSI-X
32bit 0000:80:02.0 uses non-identity mapping
pcieport 0000:80:02.2: setting latency timer to 64
  alloc irq_desc for 91 on node 1
  alloc kstat_irqs on node 1
alloc irq_2_iommu on node 1
pcieport 0000:80:02.2: irq 91 for MSI/MSI-X
32bit 0000:80:02.2 uses non-identity mapping
pcieport 0000:80:03.0: setting latency timer to 64
  alloc irq_desc for 92 on node 1
  alloc kstat_irqs on node 1
alloc irq_2_iommu on node 1
pcieport 0000:80:03.0: irq 92 for MSI/MSI-X
32bit 0000:80:03.0 uses non-identity mapping
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
intel_idle: MWAIT substates: 0x21120
intel_idle: v0.4 model 0x2D
intel_idle: lapic_timer_reliable_states 0xffffffff
ipmi message handler version 39.2
IPMI System Interface driver.
ipmi_si: Adding SMBIOS-specified kcs state machine
ipmi_si: Trying SMBIOS-specified kcs state machine at i/o address 0xcc0, slave address 0x20, irq 0
ipmi: Found new BMC (man_id: 0x004f4d,  prod_id: 0x0141, dev_id: 0x20)
IPMI kcs interface initialized
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
ACPI: Power Button [PWRF]
ACPI: acpi_idle yielding to intel_idle
ERST: Could not register with persistent store
ERST: Error Record Serialization Table (ERST) support is initialized.
GHES: APEI firmware first mode is enabled by APEI bit and WHEA _OSC.
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
tpm_tis 00:0c: 1.2 TPM (device-id 0xFE, rev-id 70)
crash memory driver: version 1.1
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:0b: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
brd: module loaded
loop: module loaded
input: Macintosh mouse button emulation as /devices/virtual/input/input1
Fixed MDIO Bus: probed
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
ehci_hcd 0000:00:1a.0: setting latency timer to 64
ehci_hcd 0000:00:1a.0: EHCI Host Controller
ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
32bit 0000:00:1a.0 uses non-identity mapping
ehci_hcd 0000:00:1a.0: debug port 2
ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
ehci_hcd 0000:00:1a.0: irq 16, io mem 0xc6801000
ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.32-358.el6.x86_64 ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.0
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:1d.0: setting latency timer to 64
ehci_hcd 0000:00:1d.0: EHCI Host Controller
ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
32bit 0000:00:1d.0 uses non-identity mapping
ehci_hcd 0000:00:1d.0: debug port 2
ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
ehci_hcd 0000:00:1d.0: irq 23, io mem 0xc6800000
ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.32-358.el6.x86_64 ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 8 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
PNP: No PS/2 controller found. Probing ports directly.
usb 1-1: new high speed USB device number 2 using ehci_hcd
Refined TSC clocksource calibration: 2899.999 MHz.
Switching to clocksource tsc
i8042.c: Can't read CTR while initializing i8042.
i8042: probe of i8042 failed with error -5
mice: PS/2 mouse device common for all mice
rtc_cmos 00:03: RTC can wake from S4
rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
cpuidle: using governor ladder
cpuidle: using governor menu
EFI Variables Facility v0.08 2004-May-17
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 17
registered taskstats version 1
rtc_cmos 00:03: setting system clock to 2013-03-18 19:53:06 UTC (1363636386)
Initalizing network drop monitor service
Freeing unused kernel memory: 1264k freed
Write protecting the kernel read-only data: 10240k
Freeing unused kernel memory: 904k freed
Freeing unused kernel memory: 1676k freed
dracut: dracut-004-303.el6
dracut: rd_NO_LUKS: removing cryptoluks activation
dracut: rd_NO_LVM: removing LVM activation
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.23.6-ioctl (2012-07-25) initialised: dm-devel@redhat.com
udev: starting version 147
device-mapper: multipath: version 1.5.0 loaded
usb 1-1: New USB device found, idVendor=8087, idProduct=0024
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
usb 1-1: configuration #1 chosen from 1 choice
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 6 ports detected
dracut: Starting plymouth daemon
dracut: rd_NO_DM: removing DM RAID activation
dracut: rd_NO_MD: removing MD RAID activation
ACPI: WMI: Mapper loaded
usb 2-1: new high speed USB device number 2 using ehci_hcd
mpt2sas version 13.101.00.00 loaded
scsi0 : Fusion MPT SAS Host
mpt2sas 0000:06:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
mpt2sas 0000:06:00.0: setting latency timer to 64
mpt2sas0: 64 BIT PCI BUS DMA ADDRESSING SUPPORTED, total mem (264571060 kB)
  alloc irq_desc for 93 on node 0
  alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
mpt2sas 0000:06:00.0: irq 93 for MSI/MSI-X
mpt2sas0-msix0: PCI-MSI-X enabled: IRQ 93
mpt2sas0: iomem(0x00000000c5e40000), mapped(0xffffc90028f60000), size(16384)
mpt2sas0: ioport(0x0000000000001000), size(256)
mpt2sas0: sending diag reset !!
usb 2-1: New USB device found, idVendor=8087, idProduct=0024
usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
usb 2-1: configuration #1 chosen from 1 choice
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 8 ports detected
usb 2-1.1: new high speed USB device number 3 using ehci_hcd
usb 2-1.1: New USB device found, idVendor=ffff, idProduct=0248
usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-1.1: Product: Gadget USB HUB
usb 2-1.1: Manufacturer: no manufacturer
usb 2-1.1: SerialNumber: 0123456789
usb 2-1.1: configuration #1 chosen from 1 choice
hub 2-1.1:1.0: USB hub found
hub 2-1.1:1.0: 6 ports detected
usb 2-1.1.1: new high speed USB device number 4 using ehci_hcd
usb 2-1.1.1: New USB device found, idVendor=04b3, idProduct=4011
usb 2-1.1.1: New USB device strings: Mfr=4, Product=5, SerialNumber=6
usb 2-1.1.1: Product: Keyboard/Mouse Function
usb 2-1.1.1: Manufacturer: Avocent
usb 2-1.1.1: SerialNumber: 20111018
usb 2-1.1.1: configuration #1 chosen from 1 choice
input: Avocent Keyboard/Mouse Function as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1.1/2-1.1.1:1.0/input/input2
generic-usb 0003:04B3:4011.0001: input,hidraw0: USB HID v1.00 Keyboard [Avocent Keyboard/Mouse Function] on usb-0000:00:1d.0-1.1.1/input0
input: Avocent Keyboard/Mouse Function as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1.1/2-1.1.1:1.1/input/input3
generic-usb 0003:04B3:4011.0002: input,hidraw1: USB HID v1.00 Mouse [Avocent Keyboard/Mouse Function] on usb-0000:00:1d.0-1.1.1/input1
input: Avocent Keyboard/Mouse Function as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1.1/2-1.1.1:1.2/input/input4
generic-usb 0003:04B3:4011.0003: input,hidraw2: USB HID v1.00 Mouse [Avocent Keyboard/Mouse Function] on usb-0000:00:1d.0-1.1.1/input2
usb 2-1.1.5: new high speed USB device number 5 using ehci_hcd
usb 2-1.1.5: New USB device found, idVendor=04b3, idProduct=4010
usb 2-1.1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-1.1.5: Product: RNDIS/Ethernet Gadget
usb 2-1.1.5: Manufacturer: IBM
usb 2-1.1.5: configuration #1 chosen from 2 choices
usb 2-1.1.5: USB disconnect, device number 5
mpt2sas0: diag reset: SUCCESS
usb 2-1.1.5: new high speed USB device number 6 using ehci_hcd
mpt2sas0: Allocated physical memory: size(4219 kB)
mpt2sas0: Current Controller Queue Depth(1865), Max Controller Queue Depth(2040)
mpt2sas0: Scatter Gather Elements per IO(128)
mpt2sas0: LSISAS2004: FWVersion(10.00.05.00), ChipRevision(0x03), BiosVersion(07.19.00.00)
mpt2sas0: Protocol=(Initiator), Capabilities=(Raid,TLR,EEDP,Snapshot Buffer,Diag Trace Buffer,Task Set Full,NCQ)
mpt2sas0: sending port enable !!
usb 2-1.1.5: New USB device found, idVendor=04b3, idProduct=4010
usb 2-1.1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-1.1.5: Product: RNDIS/Ethernet Gadget
usb 2-1.1.5: Manufacturer: IBM
usb 2-1.1.5: configuration #1 chosen from 2 choices
usb 2-1.1.1: USB disconnect, device number 4
usb 2-1.1.1: new high speed USB device number 7 using ehci_hcd
usb 2-1.1.1: New USB device found, idVendor=04b3, idProduct=4011
usb 2-1.1.1: New USB device strings: Mfr=4, Product=5, SerialNumber=6
usb 2-1.1.1: Product: Keyboard/Mouse Function
usb 2-1.1.1: Manufacturer: Avocent
usb 2-1.1.1: SerialNumber: 20111018
usb 2-1.1.1: configuration #1 chosen from 1 choice
input: Avocent Keyboard/Mouse Function as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1.1/2-1.1.1:1.0/input/input5
generic-usb 0003:04B3:4011.0004: input,hidraw0: USB HID v1.00 Keyboard [Avocent Keyboard/Mouse Function] on usb-0000:00:1d.0-1.1.1/input0
input: Avocent Keyboard/Mouse Function as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1.1/2-1.1.1:1.1/input/input6
generic-usb 0003:04B3:4011.0005: input,hidraw1: USB HID v1.00 Mouse [Avocent Keyboard/Mouse Function] on usb-0000:00:1d.0-1.1.1/input1
input: Avocent Keyboard/Mouse Function as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1.1/2-1.1.1:1.2/input/input7
generic-usb 0003:04B3:4011.0006: input,hidraw2: USB HID v1.00 Mouse [Avocent Keyboard/Mouse Function] on usb-0000:00:1d.0-1.1.1/input2
mpt2sas0: host_add: handle(0x0001), sas_addr(0x50050760490022bc), phys(8)
mpt2sas0: port enable: SUCCESS
scsi 0:1:0:0: Direct-Access     LSI      Logical Volume   3000 PQ: 0 ANSI: 6
scsi 0:1:0:0: RAID1: handle(0x00b5), wwid(0x0fbe73e14ed19b39), pd_count(2), type(SSP)
scsi 0:1:0:0: qdepth(128), tagged(1), simple(1), ordered(0), scsi_level(7), cmd_que(1)
scsi 0:0:0:0: Direct-Access     IBM-ESXS ST9600204SS      B549 PQ: 0 ANSI: 5
scsi 0:0:0:0: SSP: handle(0x0009), sas_addr(0x5000c50033c3e3b9), phy(0), device_name(0x5000c50033c3e3b8)
scsi 0:0:0:0: SSP: enclosure_logical_id(0x50050760490022bc), slot(0)
scsi 0:0:0:0: qdepth(254), tagged(1), simple(1), ordered(0), scsi_level(6), cmd_que(1)
scsi 0:0:1:0: Direct-Access     IBM-ESXS ST9600204SS      B549 PQ: 0 ANSI: 5
scsi 0:0:1:0: SSP: handle(0x000a), sas_addr(0x5000c50033c1a769), phy(1), device_name(0x5000c50033c1a768)
scsi 0:0:1:0: SSP: enclosure_logical_id(0x50050760490022bc), slot(1)
scsi 0:0:1:0: qdepth(254), tagged(1), simple(1), ordered(0), scsi_level(6), cmd_que(1)
sd 0:1:0:0: [sda] 1169920000 512-byte logical blocks: (598 GB/557 GiB)
sd 0:1:0:0: [sda] Write Protect is off
sd 0:1:0:0: [sda] Mode Sense: 03 00 00 08
sd 0:1:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
 sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7
sd 0:1:0:0: [sda] Attached SCSI disk
EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: 
dracut: Mounted root filesystem /dev/sda2
dracut: Switching root
readahead: starting
udev: starting version 147
be2net 0000:11:00.0: PCI INT A -> GSI 32 (level, low) -> IRQ 32
be2net 0000:11:00.0: setting latency timer to 64
32bit 0000:11:00.0 uses non-identity mapping
  alloc irq_desc for 94 on node 0
  alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
be2net 0000:11:00.0: irq 94 for MSI/MSI-X
be2net 0000:11:00.0: enabled 1 MSI-x vector(s)
be2net 0000:11:00.0: created 0 RSS queue(s) and 1 default RX queue
be2net 0000:11:00.0: created 1 TX queue(s)
be2net 0000:11:00.0: Emulex OneConnect(be3): 10Gbps NIC  "OCm11104-N-X" PF vNIC port 0
  alloc irq_desc for 36 on node 0
  alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
be2net 0000:11:00.1: PCI INT B -> GSI 36 (level, low) -> IRQ 36
be2net 0000:11:00.1: setting latency timer to 64
32bit 0000:11:00.1 uses non-identity mapping
  alloc irq_desc for 95 on node 0
  alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
be2net 0000:11:00.1: irq 95 for MSI/MSI-X
be2net 0000:11:00.1: enabled 1 MSI-x vector(s)
be2net 0000:11:00.1: created 0 RSS queue(s) and 1 default RX queue
be2net 0000:11:00.1: created 1 TX queue(s)
be2net 0000:11:00.1: Emulex OneConnect(be3): 10Gbps NIC  "OCm11104-N-X" PF vNIC port 1
  alloc irq_desc for 34 on node 0
  alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
be2net 0000:16:00.0: PCI INT A -> GSI 34 (level, low) -> IRQ 34
be2net 0000:16:00.0: setting latency timer to 64
32bit 0000:16:00.0 uses non-identity mapping
  alloc irq_desc for 96 on node 0
  alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
be2net 0000:16:00.0: irq 96 for MSI/MSI-X
be2net 0000:16:00.0: enabled 1 MSI-x vector(s)
be2net 0000:16:00.0: created 0 RSS queue(s) and 1 default RX queue
be2net 0000:16:00.0: created 1 TX queue(s)
be2net 0000:16:00.0: device doesn't support SRIOV
be2net 0000:16:00.0: Emulex OneConnect(be3): 10Gbps NIC  "OCm11104-N-X" PF vNIC port 0
  alloc irq_desc for 37 on node 0
  alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
be2net 0000:16:00.1: PCI INT B -> GSI 37 (level, low) -> IRQ 37
be2net 0000:16:00.1: setting latency timer to 64
32bit 0000:16:00.1 uses non-identity mapping
  alloc irq_desc for 97 on node 0
  alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
be2net 0000:16:00.1: irq 97 for MSI/MSI-X
be2net 0000:16:00.1: enabled 1 MSI-x vector(s)
be2net 0000:16:00.1: created 0 RSS queue(s) and 1 default RX queue
be2net 0000:16:00.1: created 1 TX queue(s)
be2net 0000:16:00.1: device doesn't support SRIOV
be2net 0000:16:00.1: Emulex OneConnect(be3): 10Gbps NIC  "OCm11104-N-X" PF vNIC port 1
be2net 0000:1b:00.0: PCI INT A -> GSI 40 (level, low) -> IRQ 40
be2net 0000:1b:00.0: setting latency timer to 64
32bit 0000:1b:00.0 uses non-identity mapping
  alloc irq_desc for 98 on node 0
  alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
be2net 0000:1b:00.0: irq 98 for MSI/MSI-X
be2net 0000:1b:00.0: enabled 1 MSI-x vector(s)
be2net 0000:1b:00.0: created 0 RSS queue(s) and 1 default RX queue
be2net 0000:1b:00.0: created 1 TX queue(s)
be2net 0000:1b:00.0: Emulex OneConnect(be3): 10Gbps NIC  "90Y3554" PF vNIC port 0
  alloc irq_desc for 44 on node 0
  alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
be2net 0000:1b:00.1: PCI INT B -> GSI 44 (level, low) -> IRQ 44
be2net 0000:1b:00.1: setting latency timer to 64
32bit 0000:1b:00.1 uses non-identity mapping
  alloc irq_desc for 99 on node 0
  alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
be2net 0000:1b:00.1: irq 99 for MSI/MSI-X
be2net 0000:1b:00.1: enabled 1 MSI-x vector(s)
be2net 0000:1b:00.1: created 0 RSS queue(s) and 1 default RX queue
be2net 0000:1b:00.1: created 1 TX queue(s)
be2net 0000:1b:00.1: Emulex OneConnect(be3): 10Gbps NIC  "90Y3554" PF vNIC port 1
  alloc irq_desc for 42 on node 0
  alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
be2net 0000:20:00.0: PCI INT A -> GSI 42 (level, low) -> IRQ 42
be2net 0000:20:00.0: setting latency timer to 64
32bit 0000:20:00.0 uses non-identity mapping
  alloc irq_desc for 100 on node 0
  alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
be2net 0000:20:00.0: irq 100 for MSI/MSI-X
be2net 0000:20:00.0: enabled 1 MSI-x vector(s)
be2net 0000:20:00.0: created 0 RSS queue(s) and 1 default RX queue
be2net 0000:20:00.0: created 1 TX queue(s)
be2net 0000:20:00.0: device doesn't support SRIOV
be2net 0000:20:00.0: Emulex OneConnect(be3): 10Gbps NIC  "90Y3554" PF vNIC port 0
  alloc irq_desc for 45 on node 0
  alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
be2net 0000:20:00.1: PCI INT B -> GSI 45 (level, low) -> IRQ 45
be2net 0000:20:00.1: setting latency timer to 64
32bit 0000:20:00.1 uses non-identity mapping
  alloc irq_desc for 101 on node 0
  alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
be2net 0000:20:00.1: irq 101 for MSI/MSI-X
be2net 0000:20:00.1: enabled 1 MSI-x vector(s)
be2net 0000:20:00.1: created 0 RSS queue(s) and 1 default RX queue
be2net 0000:20:00.1: created 1 TX queue(s)
be2net 0000:20:00.1: device doesn't support SRIOV
be2net 0000:20:00.1: Emulex OneConnect(be3): 10Gbps NIC  "90Y3554" PF vNIC port 1
be2net 0000:11:04.0: enabling device (0040 -> 0042)
be2net 0000:11:04.0: setting latency timer to 64
be2net 0000:11:04.0: Could not use PCIe error reporting
  alloc irq_desc for 102 on node 0
  alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
be2net 0000:11:04.0: irq 102 for MSI/MSI-X
be2net 0000:11:04.0: enabled 1 MSI-x vector(s)
be2net 0000:11:04.0: created 0 RSS queue(s) and 1 default RX queue
be2net 0000:11:04.0: created 1 TX queue(s)
be2net 0000:11:04.0: Emulex OneConnect(be3): 10Gbps NIC  "OCm11104-N-X" VF vNIC port 0
be2net 0000:11:04.1: enabling device (0040 -> 0042)
be2net 0000:11:04.1: setting latency timer to 64
be2net 0000:11:04.1: Could not use PCIe error reporting
  alloc irq_desc for 103 on node 0
  alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
be2net 0000:11:04.1: irq 103 for MSI/MSI-X
be2net 0000:11:04.1: enabled 1 MSI-x vector(s)
be2net 0000:11:04.1: created 0 RSS queue(s) and 1 default RX queue
be2net 0000:11:04.1: created 1 TX queue(s)
be2net 0000:11:04.1: Emulex OneConnect(be3): 10Gbps NIC  "OCm11104-N-X" VF vNIC port 0
be2net 0000:11:04.2: enabling device (0040 -> 0042)
be2net 0000:11:04.2: setting latency timer to 64
be2net 0000:11:04.2: Could not use PCIe error reporting
  alloc irq_desc for 104 on node 0
  alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
be2net 0000:11:04.2: irq 104 for MSI/MSI-X
be2net 0000:11:04.2: enabled 1 MSI-x vector(s)
be2net 0000:11:04.2: created 0 RSS queue(s) and 1 default RX queue
be2net 0000:11:04.2: created 1 TX queue(s)
be2net 0000:11:04.2: Emulex OneConnect(be3): 10Gbps NIC  "OCm11104-N-X" VF vNIC port 0
be2net 0000:11:04.3: enabling device (0040 -> 0042)
be2net 0000:11:04.3: setting latency timer to 64
be2net 0000:11:04.3: Could not use PCIe error reporting
  alloc irq_desc for 105 on node 0
  alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
be2net 0000:11:04.3: irq 105 for MSI/MSI-X
be2net 0000:11:04.3: enabled 1 MSI-x vector(s)
be2net 0000:11:04.3: created 0 RSS queue(s) and 1 default RX queue
be2net 0000:11:04.3: created 1 TX queue(s)
be2net 0000:11:04.3: Emulex OneConnect(be3): 10Gbps NIC  "OCm11104-N-X" VF vNIC port 0
be2net 0000:11:04.4: enabling device (0040 -> 0042)
be2net 0000:11:04.4: setting latency timer to 64
be2net 0000:11:04.4: Could not use PCIe error reporting
  alloc irq_desc for 106 on node 0
  alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
be2net 0000:11:04.4: irq 106 for MSI/MSI-X
be2net 0000:11:04.4: enabled 1 MSI-x vector(s)
be2net 0000:11:04.4: created 0 RSS queue(s) and 1 default RX queue
be2net 0000:11:04.4: created 1 TX queue(s)
be2net 0000:11:04.4: Emulex OneConnect(be3): 10Gbps NIC  "OCm11104-N-X" VF vNIC port 0
be2net 0000:11:04.5: enabling device (0040 -> 0042)
be2net 0000:11:04.5: setting latency timer to 64
be2net 0000:11:04.5: Could not use PCIe error reporting
  alloc irq_desc for 107 on node 0
  alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
be2net 0000:11:04.5: irq 107 for MSI/MSI-X
be2net 0000:11:04.5: enabled 1 MSI-x vector(s)
be2net 0000:11:04.5: created 0 RSS queue(s) and 1 default RX queue
be2net 0000:11:04.5: created 1 TX queue(s)
be2net 0000:11:04.5: Emulex OneConnect(be3): 10Gbps NIC  "OCm11104-N-X" VF vNIC port 0
be2net 0000:11:04.6: enabling device (0040 -> 0042)
be2net 0000:11:04.6: setting latency timer to 64
be2net 0000:11:04.6: Could not use PCIe error reporting
  alloc irq_desc for 108 on node 0
  alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
be2net 0000:11:04.6: irq 108 for MSI/MSI-X
be2net 0000:11:04.6: enabled 1 MSI-x vector(s)
be2net 0000:11:04.6: created 0 RSS queue(s) and 1 default RX queue
be2net 0000:11:04.6: created 1 TX queue(s)
be2net 0000:11:04.6: Emulex OneConnect(be3): 10Gbps NIC  "OCm11104-N-X" VF vNIC port 0
be2net 0000:11:04.7: enabling device (0040 -> 0042)
be2net 0000:11:04.7: setting latency timer to 64
be2net 0000:11:04.7: Could not use PCIe error reporting
  alloc irq_desc for 109 on node 0
  alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
be2net 0000:11:04.7: irq 109 for MSI/MSI-X
be2net 0000:11:04.7: enabled 1 MSI-x vector(s)
be2net 0000:11:04.7: created 0 RSS queue(s) and 1 default RX queue
be2net 0000:11:04.7: created 1 TX queue(s)
be2net 0000:11:04.7: Emulex OneConnect(be3): 10Gbps NIC  "OCm11104-N-X" VF vNIC port 0
be2net 0000:11:05.0: enabling device (0040 -> 0042)
be2net 0000:11:05.0: setting latency timer to 64
be2net 0000:11:05.0: Could not use PCIe error reporting
  alloc irq_desc for 110 on node 0
  alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
be2net 0000:11:05.0: irq 110 for MSI/MSI-X
be2net 0000:11:05.0: enabled 1 MSI-x vector(s)
be2net 0000:11:05.0: created 0 RSS queue(s) and 1 default RX queue
be2net 0000:11:05.0: created 1 TX queue(s)
be2net 0000:11:05.0: Emulex OneConnect(be3): 10Gbps NIC  "OCm11104-N-X" VF vNIC port 0
be2net 0000:11:05.1: enabling device (0040 -> 0042)
be2net 0000:11:05.1: setting latency timer to 64
be2net 0000:11:05.1: Could not use PCIe error reporting
  alloc irq_desc for 111 on node 0
  alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
be2net 0000:11:05.1: irq 111 for MSI/MSI-X
be2net 0000:11:05.1: enabled 1 MSI-x vector(s)
be2net 0000:11:05.1: created 0 RSS queue(s) and 1 default RX queue
be2net 0000:11:05.1: created 1 TX queue(s)
be2net 0000:11:05.1: Emulex OneConnect(be3): 10Gbps NIC  "OCm11104-N-X" VF vNIC port 0
be2net 0000:11:05.2: enabling device (0040 -> 0042)
be2net 0000:11:05.2: setting latency timer to 64
be2net 0000:11:05.2: Could not use PCIe error reporting
  alloc irq_desc for 112 on node 0
  alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
be2net 0000:11:05.2: irq 112 for MSI/MSI-X
be2net 0000:11:05.2: enabled 1 MSI-x vector(s)
be2net 0000:11:05.2: created 0 RSS queue(s) and 1 default RX queue
be2net 0000:11:05.2: created 1 TX queue(s)
be2net 0000:11:05.2: Emulex OneConnect(be3): 10Gbps NIC  "OCm11104-N-X" VF vNIC port 0
be2net 0000:11:05.3: enabling device (0040 -> 0042)
be2net 0000:11:05.3: setting latency timer to 64
be2net 0000:11:05.3: Could not use PCIe error reporting
  alloc irq_desc for 113 on node 0
  alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
be2net 0000:11:05.3: irq 113 for MSI/MSI-X
be2net 0000:11:05.3: enabled 1 MSI-x vector(s)
be2net 0000:11:05.3: created 0 RSS queue(s) and 1 default RX queue
be2net 0000:11:05.3: created 1 TX queue(s)
be2net 0000:11:05.3: Emulex OneConnect(be3): 10Gbps NIC  "OCm11104-N-X" VF vNIC port 0
be2net 0000:11:05.4: enabling device (0040 -> 0042)
be2net 0000:11:05.4: setting latency timer to 64
be2net 0000:11:05.4: Could not use PCIe error reporting
  alloc irq_desc for 114 on node 0
  alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
be2net 0000:11:05.4: irq 114 for MSI/MSI-X
be2net 0000:11:05.4: enabled 1 MSI-x vector(s)
be2net 0000:11:05.4: created 0 RSS queue(s) and 1 default RX queue
be2net 0000:11:05.4: created 1 TX queue(s)
be2net 0000:11:05.4: Emulex OneConnect(be3): 10Gbps NIC  "OCm11104-N-X" VF vNIC port 0
be2net 0000:11:05.5: enabling device (0040 -> 0042)
be2net 0000:11:05.5: setting latency timer to 64
be2net 0000:11:05.5: Could not use PCIe error reporting
  alloc irq_desc for 115 on node 0
  alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
be2net 0000:11:05.5: irq 115 for MSI/MSI-X
be2net 0000:11:05.5: enabled 1 MSI-x vector(s)
be2net 0000:11:05.5: created 0 RSS queue(s) and 1 default RX queue
be2net 0000:11:05.5: created 1 TX queue(s)
be2net 0000:11:05.5: Emulex OneConnect(be3): 10Gbps NIC  "OCm11104-N-X" VF vNIC port 0
be2net 0000:11:05.6: enabling device (0040 -> 0042)
be2net 0000:11:05.6: setting latency timer to 64
be2net 0000:11:05.6: Could not use PCIe error reporting
  alloc irq_desc for 116 on node 0
  alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
be2net 0000:11:05.6: irq 116 for MSI/MSI-X
be2net 0000:11:05.6: enabled 1 MSI-x vector(s)
be2net 0000:11:05.6: created 0 RSS queue(s) and 1 default RX queue
be2net 0000:11:05.6: created 1 TX queue(s)
be2net 0000:11:05.6: Emulex OneConnect(be3): 10Gbps NIC  "OCm11104-N-X" VF vNIC port 0
be2net 0000:11:05.7: enabling device (0040 -> 0042)
be2net 0000:11:05.7: setting latency timer to 64
be2net 0000:11:05.7: Could not use PCIe error reporting
  alloc irq_desc for 117 on node 0
  alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
be2net 0000:11:05.7: irq 117 for MSI/MSI-X
be2net 0000:11:05.7: enabled 1 MSI-x vector(s)
be2net 0000:11:05.7: created 0 RSS queue(s) and 1 default RX queue
be2net 0000:11:05.7: created 1 TX queue(s)
be2net 0000:11:05.7: Emulex OneConnect(be3): 10Gbps NIC  "OCm11104-N-X" VF vNIC port 0
be2net 0000:11:06.0: enabling device (0040 -> 0042)
be2net 0000:11:06.0: setting latency timer to 64
be2net 0000:11:06.0: Could not use PCIe error reporting
  alloc irq_desc for 118 on node 0
  alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
be2net 0000:11:06.0: irq 118 for MSI/MSI-X
be2net 0000:11:06.0: enabled 1 MSI-x vector(s)
be2net 0000:11:06.0: created 0 RSS queue(s) and 1 default RX queue
be2net 0000:11:06.0: created 1 TX queue(s)
be2net 0000:11:06.0: Emulex OneConnect(be3): 10Gbps NIC  "OCm11104-N-X" VF vNIC port 0
be2net 0000:11:06.1: enabling device (0040 -> 0042)
be2net 0000:11:06.1: setting latency timer to 64
be2net 0000:11:06.1: Could not use PCIe error reporting
  alloc irq_desc for 119 on node 0
  alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
be2net 0000:11:06.1: irq 119 for MSI/MSI-X
be2net 0000:11:06.1: enabled 1 MSI-x vector(s)
be2net 0000:11:06.1: created 0 RSS queue(s) and 1 default RX queue
be2net 0000:11:06.1: created 1 TX queue(s)
be2net 0000:11:06.1: Emulex OneConnect(be3): 10Gbps NIC  "OCm11104-N-X" VF vNIC port 0
be2net 0000:11:06.2: enabling device (0040 -> 0042)
be2net 0000:11:06.2: setting latency timer to 64
be2net 0000:11:06.2: Could not use PCIe error reporting
  alloc irq_desc for 120 on node 0
  alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
be2net 0000:11:06.2: irq 120 for MSI/MSI-X
be2net 0000:11:06.2: enabled 1 MSI-x vector(s)
be2net 0000:11:06.2: created 0 RSS queue(s) and 1 default RX queue
be2net 0000:11:06.2: created 1 TX queue(s)
be2net 0000:11:06.2: Emulex OneConnect(be3): 10Gbps NIC  "OCm11104-N-X" VF vNIC port 0
be2net 0000:11:06.3: enabling device (0040 -> 0042)
be2net 0000:11:06.3: setting latency timer to 64
be2net 0000:11:06.3: Could not use PCIe error reporting
  alloc irq_desc for 121 on node 0
  alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
be2net 0000:11:06.3: irq 121 for MSI/MSI-X
be2net 0000:11:06.3: enabled 1 MSI-x vector(s)
be2net 0000:11:06.3: created 0 RSS queue(s) and 1 default RX queue
be2net 0000:11:06.3: created 1 TX queue(s)
be2net 0000:11:06.3: Emulex OneConnect(be3): 10Gbps NIC  "OCm11104-N-X" VF vNIC port 0
be2net 0000:11:06.4: enabling device (0040 -> 0042)
be2net 0000:11:06.4: setting latency timer to 64
be2net 0000:11:06.4: Could not use PCIe error reporting
  alloc irq_desc for 122 on node 0
  alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
be2net 0000:11:06.4: irq 122 for MSI/MSI-X
be2net 0000:11:06.4: enabled 1 MSI-x vector(s)
be2net 0000:11:06.4: created 0 RSS queue(s) and 1 default RX queue
be2net 0000:11:06.4: created 1 TX queue(s)
be2net 0000:11:06.4: Emulex OneConnect(be3): 10Gbps NIC  "OCm11104-N-X" VF vNIC port 0
be2net 0000:11:06.5: enabling device (0040 -> 0042)
be2net 0000:11:06.5: setting latency timer to 64
be2net 0000:11:06.5: Could not use PCIe error reporting
  alloc irq_desc for 123 on node 0
  alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
be2net 0000:11:06.5: irq 123 for MSI/MSI-X
be2net 0000:11:06.5: enabled 1 MSI-x vector(s)
be2net 0000:11:06.5: created 0 RSS queue(s) and 1 default RX queue
be2net 0000:11:06.5: created 1 TX queue(s)
be2net 0000:11:06.5: Emulex OneConnect(be3): 10Gbps NIC  "OCm11104-N-X" VF vNIC port 0
be2net 0000:11:06.6: enabling device (0040 -> 0042)
be2net 0000:11:06.6: setting latency timer to 64
be2net 0000:11:06.6: Could not use PCIe error reporting
  alloc irq_desc for 124 on node 0
  alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
be2net 0000:11:06.6: irq 124 for MSI/MSI-X
be2net 0000:11:06.6: enabled 1 MSI-x vector(s)
be2net 0000:11:06.6: created 0 RSS queue(s) and 1 default RX queue
be2net 0000:11:06.6: created 1 TX queue(s)
be2net 0000:11:06.6: Emulex OneConnect(be3): 10Gbps NIC  "OCm11104-N-X" VF vNIC port 0
be2net 0000:11:06.7: enabling device (0040 -> 0042)
be2net 0000:11:06.7: setting latency timer to 64
be2net 0000:11:06.7: Could not use PCIe error reporting
  alloc irq_desc for 125 on node 0
  alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
be2net 0000:11:06.7: irq 125 for MSI/MSI-X
be2net 0000:11:06.7: enabled 1 MSI-x vector(s)
be2net 0000:11:06.7: created 0 RSS queue(s) and 1 default RX queue
be2net 0000:11:06.7: created 1 TX queue(s)
be2net 0000:11:06.7: Emulex OneConnect(be3): 10Gbps NIC  "OCm11104-N-X" VF vNIC port 0
be2net 0000:11:07.0: enabling device (0040 -> 0042)
be2net 0000:11:07.0: setting latency timer to 64
be2net 0000:11:07.0: Could not use PCIe error reporting
  alloc irq_desc for 126 on node 0
  alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
be2net 0000:11:07.0: irq 126 for MSI/MSI-X
be2net 0000:11:07.0: enabled 1 MSI-x vector(s)
be2net 0000:11:07.0: created 0 RSS queue(s) and 1 default RX queue
be2net 0000:11:07.0: created 1 TX queue(s)
be2net 0000:11:07.0: Emulex OneConnect(be3): 10Gbps NIC  "OCm11104-N-X" VF vNIC port 0
be2net 0000:11:07.1: enabling device (0040 -> 0042)
be2net 0000:11:07.1: setting latency timer to 64
be2net 0000:11:07.1: Could not use PCIe error reporting
  alloc irq_desc for 127 on node 0
  alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
be2net 0000:11:07.1: irq 127 for MSI/MSI-X
be2net 0000:11:07.1: enabled 1 MSI-x vector(s)
be2net 0000:11:07.1: created 0 RSS queue(s) and 1 default RX queue
be2net 0000:11:07.1: created 1 TX queue(s)
be2net 0000:11:07.1: Emulex OneConnect(be3): 10Gbps NIC  "OCm11104-N-X" VF vNIC port 0
be2net 0000:11:07.2: enabling device (0040 -> 0042)
be2net 0000:11:07.2: setting latency timer to 64
be2net 0000:11:07.2: Could not use PCIe error reporting
  alloc irq_desc for 128 on node 0
  alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
be2net 0000:11:07.2: irq 128 for MSI/MSI-X
be2net 0000:11:07.2: enabled 1 MSI-x vector(s)
be2net 0000:11:07.2: created 0 RSS queue(s) and 1 default RX queue
be2net 0000:11:07.2: created 1 TX queue(s)
be2net 0000:11:07.2: Emulex OneConnect(be3): 10Gbps NIC  "OCm11104-N-X" VF vNIC port 0
be2net 0000:11:07.3: enabling device (0040 -> 0042)
be2net 0000:11:07.3: setting latency timer to 64
be2net 0000:11:07.3: Could not use PCIe error reporting
  alloc irq_desc for 129 on node 0
  alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
be2net 0000:11:07.3: irq 129 for MSI/MSI-X
be2net 0000:11:07.3: enabled 1 MSI-x vector(s)
be2net 0000:11:07.3: created 0 RSS queue(s) and 1 default RX queue
be2net 0000:11:07.3: created 1 TX queue(s)
be2net 0000:11:07.3: Emulex OneConnect(be3): 10Gbps NIC  "OCm11104-N-X" VF vNIC port 0
be2net 0000:11:07.4: enabling device (0040 -> 0042)
be2net 0000:11:07.4: setting latency timer to 64
be2net 0000:11:07.4: Could not use PCIe error reporting
  alloc irq_desc for 130 on node 0
  alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
be2net 0000:11:07.4: irq 130 for MSI/MSI-X
be2net 0000:11:07.4: enabled 1 MSI-x vector(s)
be2net 0000:11:07.4: created 0 RSS queue(s) and 1 default RX queue
be2net 0000:11:07.4: created 1 TX queue(s)
be2net 0000:11:07.4: Emulex OneConnect(be3): 10Gbps NIC  "OCm11104-N-X" VF vNIC port 0
be2net 0000:11:07.5: enabling device (0040 -> 0042)
be2net 0000:11:07.5: setting latency timer to 64
be2net 0000:11:07.5: Could not use PCIe error reporting
  alloc irq_desc for 131 on node 0
  alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
be2net 0000:11:07.5: irq 131 for MSI/MSI-X
be2net 0000:11:07.5: enabled 1 MSI-x vector(s)
be2net 0000:11:07.5: created 0 RSS queue(s) and 1 default RX queue
be2net 0000:11:07.5: created 1 TX queue(s)
be2net 0000:11:07.5: Emulex OneConnect(be3): 10Gbps NIC  "OCm11104-N-X" VF vNIC port 0
be2net 0000:11:08.0: enabling device (0040 -> 0042)
be2net 0000:11:08.0: setting latency timer to 64
be2net 0000:11:08.0: Could not use PCIe error reporting
  alloc irq_desc for 132 on node 0
  alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
be2net 0000:11:08.0: irq 132 for MSI/MSI-X
be2net 0000:11:08.0: enabled 1 MSI-x vector(s)
be2net 0000:11:08.0: created 0 RSS queue(s) and 1 default RX queue
be2net 0000:11:08.0: created 1 TX queue(s)
be2net 0000:11:08.0: Emulex OneConnect(be3): 10Gbps NIC  "OCm11104-N-X" VF vNIC port 1
be2net 0000:11:08.1: enabling device (0040 -> 0042)
be2net 0000:11:08.1: setting latency timer to 64
be2net 0000:11:08.1: Could not use PCIe error reporting
  alloc irq_desc for 133 on node 0
  alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
be2net 0000:11:08.1: irq 133 for MSI/MSI-X
be2net 0000:11:08.1: enabled 1 MSI-x vector(s)
be2net 0000:11:08.1: created 0 RSS queue(s) and 1 default RX queue
be2net 0000:11:08.1: created 1 TX queue(s)
be2net 0000:11:08.1: Emulex OneConnect(be3): 10Gbps NIC  "OCm11104-N-X" VF vNIC port 1
be2net 0000:11:08.2: enabling device (0040 -> 0042)
be2net 0000:11:08.2: setting latency timer to 64
be2net 0000:11:08.2: Could not use PCIe error reporting
  alloc irq_desc for 134 on node 0
  alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
be2net 0000:11:08.2: irq 134 for MSI/MSI-X
be2net 0000:11:08.2: enabled 1 MSI-x vector(s)
be2net 0000:11:08.2: created 0 RSS queue(s) and 1 default RX queue
be2net 0000:11:08.2: created 1 TX queue(s)
be2net 0000:11:08.2: Emulex OneConnect(be3): 10Gbps NIC  "OCm11104-N-X" VF vNIC port 1
be2net 0000:11:08.3: enabling device (0040 -> 0042)
be2net 0000:11:08.3: setting latency timer to 64
be2net 0000:11:08.3: Could not use PCIe error reporting
  alloc irq_desc for 135 on node 0
  alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
be2net 0000:11:08.3: irq 135 for MSI/MSI-X
be2net 0000:11:08.3: enabled 1 MSI-x vector(s)
be2net 0000:11:08.3: created 0 RSS queue(s) and 1 default RX queue
be2net 0000:11:08.3: created 1 TX queue(s)
be2net 0000:11:08.3: Emulex OneConnect(be3): 10Gbps NIC  "OCm11104-N-X" VF vNIC port 1
be2net 0000:11:08.4: enabling device (0040 -> 0042)
be2net 0000:11:08.4: setting latency timer to 64
be2net 0000:11:08.4: Could not use PCIe error reporting
  alloc irq_desc for 136 on node 0
  alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
be2net 0000:11:08.4: irq 136 for MSI/MSI-X
be2net 0000:11:08.4: enabled 1 MSI-x vector(s)
be2net 0000:11:08.4: created 0 RSS queue(s) and 1 default RX queue
be2net 0000:11:08.4: created 1 TX queue(s)
be2net 0000:11:08.4: Emulex OneConnect(be3): 10Gbps NIC  "OCm11104-N-X" VF vNIC port 1
be2net 0000:11:08.5: enabling device (0040 -> 0042)
be2net 0000:11:08.5: setting latency timer to 64
be2net 0000:11:08.5: Could not use PCIe error reporting
  alloc irq_desc for 137 on node 0
  alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
be2net 0000:11:08.5: irq 137 for MSI/MSI-X
be2net 0000:11:08.5: enabled 1 MSI-x vector(s)
be2net 0000:11:08.5: created 0 RSS queue(s) and 1 default RX queue
be2net 0000:11:08.5: created 1 TX queue(s)
be2net 0000:11:08.5: Emulex OneConnect(be3): 10Gbps NIC  "OCm11104-N-X" VF vNIC port 1
be2net 0000:11:08.6: enabling device (0040 -> 0042)
be2net 0000:11:08.6: setting latency timer to 64
be2net 0000:11:08.6: Could not use PCIe error reporting
  alloc irq_desc for 138 on node 0
  alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
be2net 0000:11:08.6: irq 138 for MSI/MSI-X
be2net 0000:11:08.6: enabled 1 MSI-x vector(s)
be2net 0000:11:08.6: created 0 RSS queue(s) and 1 default RX queue
be2net 0000:11:08.6: created 1 TX queue(s)
be2net 0000:11:08.6: Emulex OneConnect(be3): 10Gbps NIC  "OCm11104-N-X" VF vNIC port 1
be2net 0000:11:08.7: enabling device (0040 -> 0042)
be2net 0000:11:08.7: setting latency timer to 64
be2net 0000:11:08.7: Could not use PCIe error reporting
  alloc irq_desc for 139 on node 0
  alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
be2net 0000:11:08.7: irq 139 for MSI/MSI-X
be2net 0000:11:08.7: enabled 1 MSI-x vector(s)
be2net 0000:11:08.7: created 0 RSS queue(s) and 1 default RX queue
be2net 0000:11:08.7: created 1 TX queue(s)
be2net 0000:11:08.7: Emulex OneConnect(be3): 10Gbps NIC  "OCm11104-N-X" VF vNIC port 1
be2net 0000:11:09.0: enabling device (0040 -> 0042)
be2net 0000:11:09.0: setting latency timer to 64
be2net 0000:11:09.0: Could not use PCIe error reporting
  alloc irq_desc for 140 on node 0
  alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
be2net 0000:11:09.0: irq 140 for MSI/MSI-X
be2net 0000:11:09.0: enabled 1 MSI-x vector(s)
be2net 0000:11:09.0: created 0 RSS queue(s) and 1 default RX queue
be2net 0000:11:09.0: created 1 TX queue(s)
be2net 0000:11:09.0: Emulex OneConnect(be3): 10Gbps NIC  "OCm11104-N-X" VF vNIC port 1
be2net 0000:11:09.1: enabling device (0040 -> 0042)
be2net 0000:11:09.1: setting latency timer to 64
be2net 0000:11:09.1: Could not use PCIe error reporting
  alloc irq_desc for 141 on node 0
  alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
be2net 0000:11:09.1: irq 141 for MSI/MSI-X
be2net 0000:11:09.1: enabled 1 MSI-x vector(s)
be2net 0000:11:09.1: created 0 RSS queue(s) and 1 default RX queue
be2net 0000:11:09.1: created 1 TX queue(s)
be2net 0000:11:09.1: Emulex OneConnect(be3): 10Gbps NIC  "OCm11104-N-X" VF vNIC port 1
be2net 0000:11:09.2: enabling device (0040 -> 0042)
be2net 0000:11:09.2: setting latency timer to 64
be2net 0000:11:09.2: Could not use PCIe error reporting
  alloc irq_desc for 142 on node 0
  alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
be2net 0000:11:09.2: irq 142 for MSI/MSI-X
be2net 0000:11:09.2: enabled 1 MSI-x vector(s)
be2net 0000:11:09.2: created 0 RSS queue(s) and 1 default RX queue
be2net 0000:11:09.2: created 1 TX queue(s)
be2net 0000:11:09.2: Emulex OneConnect(be3): 10Gbps NIC  "OCm11104-N-X" VF vNIC port 1
be2net 0000:11:09.3: enabling device (0040 -> 0042)
be2net 0000:11:09.3: setting latency timer to 64
be2net 0000:11:09.3: Could not use PCIe error reporting
  alloc irq_desc for 143 on node 0
  alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
be2net 0000:11:09.3: irq 143 for MSI/MSI-X
be2net 0000:11:09.3: enabled 1 MSI-x vector(s)
be2net 0000:11:09.3: created 0 RSS queue(s) and 1 default RX queue
be2net 0000:11:09.3: created 1 TX queue(s)
be2net 0000:11:09.3: Emulex OneConnect(be3): 10Gbps NIC  "OCm11104-N-X" VF vNIC port 1
be2net 0000:11:09.4: enabling device (0040 -> 0042)
be2net 0000:11:09.4: setting latency timer to 64
be2net 0000:11:09.4: Could not use PCIe error reporting
  alloc irq_desc for 144 on node 0
  alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
be2net 0000:11:09.4: irq 144 for MSI/MSI-X
be2net 0000:11:09.4: enabled 1 MSI-x vector(s)
be2net 0000:11:09.4: created 0 RSS queue(s) and 1 default RX queue
be2net 0000:11:09.4: created 1 TX queue(s)
be2net 0000:11:09.4: Emulex OneConnect(be3): 10Gbps NIC  "OCm11104-N-X" VF vNIC port 1
be2net 0000:11:09.5: enabling device (0040 -> 0042)
be2net 0000:11:09.5: setting latency timer to 64
be2net 0000:11:09.5: Could not use PCIe error reporting
  alloc irq_desc for 145 on node 0
  alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
be2net 0000:11:09.5: irq 145 for MSI/MSI-X
be2net 0000:11:09.5: enabled 1 MSI-x vector(s)
be2net 0000:11:09.5: created 0 RSS queue(s) and 1 default RX queue
be2net 0000:11:09.5: created 1 TX queue(s)
be2net 0000:11:09.5: Emulex OneConnect(be3): 10Gbps NIC  "OCm11104-N-X" VF vNIC port 1
be2net 0000:11:09.6: enabling device (0040 -> 0042)
be2net 0000:11:09.6: setting latency timer to 64
be2net 0000:11:09.6: Could not use PCIe error reporting
  alloc irq_desc for 146 on node 0
  alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
be2net 0000:11:09.6: irq 146 for MSI/MSI-X
be2net 0000:11:09.6: enabled 1 MSI-x vector(s)
be2net 0000:11:09.6: created 0 RSS queue(s) and 1 default RX queue
be2net 0000:11:09.6: created 1 TX queue(s)
be2net 0000:11:09.6: Emulex OneConnect(be3): 10Gbps NIC  "OCm11104-N-X" VF vNIC port 1
be2net 0000:11:09.7: enabling device (0040 -> 0042)
be2net 0000:11:09.7: setting latency timer to 64
be2net 0000:11:09.7: Could not use PCIe error reporting
  alloc irq_desc for 147 on node 0
  alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
be2net 0000:11:09.7: irq 147 for MSI/MSI-X
be2net 0000:11:09.7: enabled 1 MSI-x vector(s)
be2net 0000:11:09.7: created 0 RSS queue(s) and 1 default RX queue
be2net 0000:11:09.7: created 1 TX queue(s)
be2net 0000:11:09.7: Emulex OneConnect(be3): 10Gbps NIC  "OCm11104-N-X" VF vNIC port 1
be2net 0000:11:0a.0: enabling device (0040 -> 0042)
be2net 0000:11:0a.0: setting latency timer to 64
be2net 0000:11:0a.0: Could not use PCIe error reporting
  alloc irq_desc for 148 on node 0
  alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
be2net 0000:11:0a.0: irq 148 for MSI/MSI-X
be2net 0000:11:0a.0: enabled 1 MSI-x vector(s)
be2net 0000:11:0a.0: created 0 RSS queue(s) and 1 default RX queue
be2net 0000:11:0a.0: created 1 TX queue(s)
be2net 0000:11:0a.0: Emulex OneConnect(be3): 10Gbps NIC  "OCm11104-N-X" VF vNIC port 1
be2net 0000:11:0a.1: enabling device (0040 -> 0042)
be2net 0000:11:0a.1: setting latency timer to 64
be2net 0000:11:0a.1: Could not use PCIe error reporting
  alloc irq_desc for 149 on node 0
  alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
be2net 0000:11:0a.1: irq 149 for MSI/MSI-X
be2net 0000:11:0a.1: enabled 1 MSI-x vector(s)
be2net 0000:11:0a.1: created 0 RSS queue(s) and 1 default RX queue
be2net 0000:11:0a.1: created 1 TX queue(s)
be2net 0000:11:0a.1: Emulex OneConnect(be3): 10Gbps NIC  "OCm11104-N-X" VF vNIC port 1
be2net 0000:11:0a.2: enabling device (0040 -> 0042)
be2net 0000:11:0a.2: setting latency timer to 64
be2net 0000:11:0a.2: Could not use PCIe error reporting
  alloc irq_desc for 150 on node 0
  alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
be2net 0000:11:0a.2: irq 150 for MSI/MSI-X
be2net 0000:11:0a.2: enabled 1 MSI-x vector(s)
be2net 0000:11:0a.2: created 0 RSS queue(s) and 1 default RX queue
be2net 0000:11:0a.2: created 1 TX queue(s)
be2net 0000:11:0a.2: Emulex OneConnect(be3): 10Gbps NIC  "OCm11104-N-X" VF vNIC port 1
be2net 0000:11:0a.3: enabling device (0040 -> 0042)
be2net 0000:11:0a.3: setting latency timer to 64
be2net 0000:11:0a.3: Could not use PCIe error reporting
  alloc irq_desc for 151 on node 0
  alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
be2net 0000:11:0a.3: irq 151 for MSI/MSI-X
be2net 0000:11:0a.3: enabled 1 MSI-x vector(s)
be2net 0000:11:0a.3: created 0 RSS queue(s) and 1 default RX queue
be2net 0000:11:0a.3: created 1 TX queue(s)
be2net 0000:11:0a.3: Emulex OneConnect(be3): 10Gbps NIC  "OCm11104-N-X" VF vNIC port 1
be2net 0000:11:0a.4: enabling device (0040 -> 0042)
be2net 0000:11:0a.4: setting latency timer to 64
be2net 0000:11:0a.4: Could not use PCIe error reporting
  alloc irq_desc for 152 on node 0
  alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
be2net 0000:11:0a.4: irq 152 for MSI/MSI-X
be2net 0000:11:0a.4: enabled 1 MSI-x vector(s)
be2net 0000:11:0a.4: created 0 RSS queue(s) and 1 default RX queue
be2net 0000:11:0a.4: created 1 TX queue(s)
be2net 0000:11:0a.4: Emulex OneConnect(be3): 10Gbps NIC  "OCm11104-N-X" VF vNIC port 1
be2net 0000:11:0a.5: enabling device (0040 -> 0042)
be2net 0000:11:0a.5: setting latency timer to 64
be2net 0000:11:0a.5: Could not use PCIe error reporting
  alloc irq_desc for 153 on node 0
  alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
be2net 0000:11:0a.5: irq 153 for MSI/MSI-X
be2net 0000:11:0a.5: enabled 1 MSI-x vector(s)
be2net 0000:11:0a.5: created 0 RSS queue(s) and 1 default RX queue
be2net 0000:11:0a.5: created 1 TX queue(s)
be2net 0000:11:0a.5: Emulex OneConnect(be3): 10Gbps NIC  "OCm11104-N-X" VF vNIC port 1
be2net 0000:11:0a.6: enabling device (0040 -> 0042)
be2net 0000:11:0a.6: setting latency timer to 64
be2net 0000:11:0a.6: Could not use PCIe error reporting
  alloc irq_desc for 154 on node 0
  alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
be2net 0000:11:0a.6: irq 154 for MSI/MSI-X
be2net 0000:11:0a.6: enabled 1 MSI-x vector(s)
be2net 0000:11:0a.6: created 0 RSS queue(s) and 1 default RX queue
be2net 0000:11:0a.6: created 1 TX queue(s)
be2net 0000:11:0a.6: Emulex OneConnect(be3): 10Gbps NIC  "OCm11104-N-X" VF vNIC port 1
be2net 0000:11:0a.7: enabling device (0040 -> 0042)
be2net 0000:11:0a.7: setting latency timer to 64
be2net 0000:11:0a.7: Could not use PCIe error reporting
  alloc irq_desc for 155 on node 0
  alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
be2net 0000:11:0a.7: irq 155 for MSI/MSI-X
be2net 0000:11:0a.7: enabled 1 MSI-x vector(s)
be2net 0000:11:0a.7: created 0 RSS queue(s) and 1 default RX queue
be2net 0000:11:0a.7: created 1 TX queue(s)
be2net 0000:11:0a.7: Emulex OneConnect(be3): 10Gbps NIC  "OCm11104-N-X" VF vNIC port 1
be2net 0000:11:0b.0: enabling device (0040 -> 0042)
be2net 0000:11:0b.0: setting latency timer to 64
be2net 0000:11:0b.0: Could not use PCIe error reporting
  alloc irq_desc for 156 on node 0
  alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
be2net 0000:11:0b.0: irq 156 for MSI/MSI-X
be2net 0000:11:0b.0: enabled 1 MSI-x vector(s)
be2net 0000:11:0b.0: created 0 RSS queue(s) and 1 default RX queue
be2net 0000:11:0b.0: created 1 TX queue(s)
be2net 0000:11:0b.0: Emulex OneConnect(be3): 10Gbps NIC  "OCm11104-N-X" VF vNIC port 1
be2net 0000:11:0b.1: enabling device (0040 -> 0042)
be2net 0000:11:0b.1: setting latency timer to 64
be2net 0000:11:0b.1: Could not use PCIe error reporting
  alloc irq_desc for 157 on node 0
  alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
be2net 0000:11:0b.1: irq 157 for MSI/MSI-X
be2net 0000:11:0b.1: enabled 1 MSI-x vector(s)
be2net 0000:11:0b.1: created 0 RSS queue(s) and 1 default RX queue
be2net 0000:11:0b.1: created 1 TX queue(s)
be2net 0000:11:0b.1: Emulex OneConnect(be3): 10Gbps NIC  "OCm11104-N-X" VF vNIC port 1
be2net 0000:11:0b.2: enabling device (0040 -> 0042)
be2net 0000:11:0b.2: setting latency timer to 64
be2net 0000:11:0b.2: Could not use PCIe error reporting
  alloc irq_desc for 158 on node 0
  alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
be2net 0000:11:0b.2: irq 158 for MSI/MSI-X
be2net 0000:11:0b.2: enabled 1 MSI-x vector(s)
be2net 0000:11:0b.2: created 0 RSS queue(s) and 1 default RX queue
be2net 0000:11:0b.2: created 1 TX queue(s)
be2net 0000:11:0b.2: Emulex OneConnect(be3): 10Gbps NIC  "OCm11104-N-X" VF vNIC port 1
be2net 0000:11:0b.3: enabling device (0040 -> 0042)
be2net 0000:11:0b.3: setting latency timer to 64
be2net 0000:11:0b.3: Could not use PCIe error reporting
  alloc irq_desc for 159 on node 0
  alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
be2net 0000:11:0b.3: irq 159 for MSI/MSI-X
be2net 0000:11:0b.3: enabled 1 MSI-x vector(s)
be2net 0000:11:0b.3: created 0 RSS queue(s) and 1 default RX queue
be2net 0000:11:0b.3: created 1 TX queue(s)
be2net 0000:11:0b.3: Emulex OneConnect(be3): 10Gbps NIC  "OCm11104-N-X" VF vNIC port 1
be2net 0000:11:0b.4: enabling device (0040 -> 0042)
be2net 0000:11:0b.4: setting latency timer to 64
be2net 0000:11:0b.4: Could not use PCIe error reporting
  alloc irq_desc for 160 on node 0
  alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
be2net 0000:11:0b.4: irq 160 for MSI/MSI-X
be2net 0000:11:0b.4: enabled 1 MSI-x vector(s)
be2net 0000:11:0b.4: created 0 RSS queue(s) and 1 default RX queue
be2net 0000:11:0b.4: created 1 TX queue(s)
be2net 0000:11:0b.4: Emulex OneConnect(be3): 10Gbps NIC  "OCm11104-N-X" VF vNIC port 1
be2net 0000:11:0b.5: enabling device (0040 -> 0042)
be2net 0000:11:0b.5: setting latency timer to 64
be2net 0000:11:0b.5: Could not use PCIe error reporting
  alloc irq_desc for 161 on node 0
  alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
be2net 0000:11:0b.5: irq 161 for MSI/MSI-X
be2net 0000:11:0b.5: enabled 1 MSI-x vector(s)
be2net 0000:11:0b.5: created 0 RSS queue(s) and 1 default RX queue
be2net 0000:11:0b.5: created 1 TX queue(s)
be2net 0000:11:0b.5: Emulex OneConnect(be3): 10Gbps NIC  "OCm11104-N-X" VF vNIC port 1
be2net 0000:1b:04.0: enabling device (0040 -> 0042)
be2net 0000:1b:04.0: setting latency timer to 64
be2net 0000:1b:04.0: Could not use PCIe error reporting
  alloc irq_desc for 162 on node 0
  alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
be2net 0000:1b:04.0: irq 162 for MSI/MSI-X
be2net 0000:1b:04.0: enabled 1 MSI-x vector(s)
be2net 0000:1b:04.0: created 0 RSS queue(s) and 1 default RX queue
be2net 0000:1b:04.0: created 1 TX queue(s)
be2net 0000:1b:04.0: Emulex OneConnect(be3): 10Gbps NIC  "90Y3554" VF vNIC port 0
be2net 0000:1b:04.1: enabling device (0040 -> 0042)
be2net 0000:1b:04.1: setting latency timer to 64
be2net 0000:1b:04.1: Could not use PCIe error reporting
  alloc irq_desc for 163 on node 0
  alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
be2net 0000:1b:04.1: irq 163 for MSI/MSI-X
be2net 0000:1b:04.1: enabled 1 MSI-x vector(s)
be2net 0000:1b:04.1: created 0 RSS queue(s) and 1 default RX queue
be2net 0000:1b:04.1: created 1 TX queue(s)
be2net 0000:1b:04.1: Emulex OneConnect(be3): 10Gbps NIC  "90Y3554" VF vNIC port 0
be2net 0000:1b:04.2: enabling device (0040 -> 0042)
be2net 0000:1b:04.2: setting latency timer to 64
be2net 0000:1b:04.2: Could not use PCIe error reporting
  alloc irq_desc for 164 on node 0
  alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
be2net 0000:1b:04.2: irq 164 for MSI/MSI-X
be2net 0000:1b:04.2: enabled 1 MSI-x vector(s)
be2net 0000:1b:04.2: created 0 RSS queue(s) and 1 default RX queue
be2net 0000:1b:04.2: created 1 TX queue(s)
be2net 0000:1b:04.2: Emulex OneConnect(be3): 10Gbps NIC  "90Y3554" VF vNIC port 0
be2net 0000:1b:04.3: enabling device (0040 -> 0042)
be2net 0000:1b:04.3: setting latency timer to 64
be2net 0000:1b:04.3: Could not use PCIe error reporting
  alloc irq_desc for 165 on node 0
  alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
be2net 0000:1b:04.3: irq 165 for MSI/MSI-X
be2net 0000:1b:04.3: enabled 1 MSI-x vector(s)
be2net 0000:1b:04.3: created 0 RSS queue(s) and 1 default RX queue
be2net 0000:1b:04.3: created 1 TX queue(s)
be2net 0000:1b:04.3: Emulex OneConnect(be3): 10Gbps NIC  "90Y3554" VF vNIC port 0
be2net 0000:1b:04.4: enabling device (0040 -> 0042)
be2net 0000:1b:04.4: setting latency timer to 64
be2net 0000:1b:04.4: Could not use PCIe error reporting
  alloc irq_desc for 166 on node 0
  alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
be2net 0000:1b:04.4: irq 166 for MSI/MSI-X
be2net 0000:1b:04.4: enabled 1 MSI-x vector(s)
be2net 0000:1b:04.4: created 0 RSS queue(s) and 1 default RX queue
be2net 0000:1b:04.4: created 1 TX queue(s)
be2net 0000:1b:04.4: Emulex OneConnect(be3): 10Gbps NIC  "90Y3554" VF vNIC port 0
be2net 0000:1b:04.5: enabling device (0040 -> 0042)
be2net 0000:1b:04.5: setting latency timer to 64
be2net 0000:1b:04.5: Could not use PCIe error reporting
  alloc irq_desc for 167 on node 0
  alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
be2net 0000:1b:04.5: irq 167 for MSI/MSI-X
be2net 0000:1b:04.5: enabled 1 MSI-x vector(s)
be2net 0000:1b:04.5: created 0 RSS queue(s) and 1 default RX queue
be2net 0000:1b:04.5: created 1 TX queue(s)
be2net 0000:1b:04.5: Emulex OneConnect(be3): 10Gbps NIC  "90Y3554" VF vNIC port 0
be2net 0000:1b:04.6: enabling device (0040 -> 0042)
be2net 0000:1b:04.6: setting latency timer to 64
be2net 0000:1b:04.6: Could not use PCIe error reporting
  alloc irq_desc for 168 on node 0
  alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
be2net 0000:1b:04.6: irq 168 for MSI/MSI-X
be2net 0000:1b:04.6: enabled 1 MSI-x vector(s)
be2net 0000:1b:04.6: created 0 RSS queue(s) and 1 default RX queue
be2net 0000:1b:04.6: created 1 TX queue(s)
be2net 0000:1b:04.6: Emulex OneConnect(be3): 10Gbps NIC  "90Y3554" VF vNIC port 0
be2net 0000:1b:04.7: enabling device (0040 -> 0042)
be2net 0000:1b:04.7: setting latency timer to 64
be2net 0000:1b:04.7: Could not use PCIe error reporting
  alloc irq_desc for 169 on node 0
  alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
be2net 0000:1b:04.7: irq 169 for MSI/MSI-X
be2net 0000:1b:04.7: enabled 1 MSI-x vector(s)
be2net 0000:1b:04.7: created 0 RSS queue(s) and 1 default RX queue
be2net 0000:1b:04.7: created 1 TX queue(s)
be2net 0000:1b:04.7: Emulex OneConnect(be3): 10Gbps NIC  "90Y3554" VF vNIC port 0
be2net 0000:1b:05.0: enabling device (0040 -> 0042)
be2net 0000:1b:05.0: setting latency timer to 64
be2net 0000:1b:05.0: Could not use PCIe error reporting
  alloc irq_desc for 170 on node 0
  alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
be2net 0000:1b:05.0: irq 170 for MSI/MSI-X
be2net 0000:1b:05.0: enabled 1 MSI-x vector(s)
be2net 0000:1b:05.0: created 0 RSS queue(s) and 1 default RX queue
be2net 0000:1b:05.0: created 1 TX queue(s)
be2net 0000:1b:05.0: Emulex OneConnect(be3): 10Gbps NIC  "90Y3554" VF vNIC port 0
be2net 0000:1b:05.1: enabling device (0040 -> 0042)
be2net 0000:1b:05.1: setting latency timer to 64
be2net 0000:1b:05.1: Could not use PCIe error reporting
  alloc irq_desc for 171 on node 0
  alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
be2net 0000:1b:05.1: irq 171 for MSI/MSI-X
be2net 0000:1b:05.1: enabled 1 MSI-x vector(s)
be2net 0000:1b:05.1: created 0 RSS queue(s) and 1 default RX queue
be2net 0000:1b:05.1: created 1 TX queue(s)
be2net 0000:1b:05.1: Emulex OneConnect(be3): 10Gbps NIC  "90Y3554" VF vNIC port 0
be2net 0000:1b:05.2: enabling device (0040 -> 0042)
be2net 0000:1b:05.2: setting latency timer to 64
be2net 0000:1b:05.2: Could not use PCIe error reporting
  alloc irq_desc for 172 on node 0
  alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
be2net 0000:1b:05.2: irq 172 for MSI/MSI-X
be2net 0000:1b:05.2: enabled 1 MSI-x vector(s)
be2net 0000:1b:05.2: created 0 RSS queue(s) and 1 default RX queue
be2net 0000:1b:05.2: created 1 TX queue(s)
be2net 0000:1b:05.2: Emulex OneConnect(be3): 10Gbps NIC  "90Y3554" VF vNIC port 0
be2net 0000:1b:05.3: enabling device (0040 -> 0042)
be2net 0000:1b:05.3: setting latency timer to 64
be2net 0000:1b:05.3: Could not use PCIe error reporting
  alloc irq_desc for 173 on node 0
  alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
be2net 0000:1b:05.3: irq 173 for MSI/MSI-X
be2net 0000:1b:05.3: enabled 1 MSI-x vector(s)
be2net 0000:1b:05.3: created 0 RSS queue(s) and 1 default RX queue
be2net 0000:1b:05.3: created 1 TX queue(s)
be2net 0000:1b:05.3: Emulex OneConnect(be3): 10Gbps NIC  "90Y3554" VF vNIC port 0
be2net 0000:1b:05.4: enabling device (0040 -> 0042)
be2net 0000:1b:05.4: setting latency timer to 64
be2net 0000:1b:05.4: Could not use PCIe error reporting
  alloc irq_desc for 174 on node 0
  alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
be2net 0000:1b:05.4: irq 174 for MSI/MSI-X
be2net 0000:1b:05.4: enabled 1 MSI-x vector(s)
be2net 0000:1b:05.4: created 0 RSS queue(s) and 1 default RX queue
be2net 0000:1b:05.4: created 1 TX queue(s)
be2net 0000:1b:05.4: Emulex OneConnect(be3): 10Gbps NIC  "90Y3554" VF vNIC port 0
be2net 0000:1b:05.5: enabling device (0040 -> 0042)
be2net 0000:1b:05.5: setting latency timer to 64
be2net 0000:1b:05.5: Could not use PCIe error reporting
  alloc irq_desc for 175 on node 0
  alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
be2net 0000:1b:05.5: irq 175 for MSI/MSI-X
be2net 0000:1b:05.5: enabled 1 MSI-x vector(s)
be2net 0000:1b:05.5: created 0 RSS queue(s) and 1 default RX queue
be2net 0000:1b:05.5: created 1 TX queue(s)
be2net 0000:1b:05.5: Emulex OneConnect(be3): 10Gbps NIC  "90Y3554" VF vNIC port 0
be2net 0000:1b:05.6: enabling device (0040 -> 0042)
be2net 0000:1b:05.6: setting latency timer to 64
be2net 0000:1b:05.6: Could not use PCIe error reporting
  alloc irq_desc for 176 on node 0
  alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
be2net 0000:1b:05.6: irq 176 for MSI/MSI-X
be2net 0000:1b:05.6: enabled 1 MSI-x vector(s)
be2net 0000:1b:05.6: created 0 RSS queue(s) and 1 default RX queue
be2net 0000:1b:05.6: created 1 TX queue(s)
be2net 0000:1b:05.6: Emulex OneConnect(be3): 10Gbps NIC  "90Y3554" VF vNIC port 0
be2net 0000:1b:05.7: enabling device (0040 -> 0042)
be2net 0000:1b:05.7: setting latency timer to 64
be2net 0000:1b:05.7: Could not use PCIe error reporting
  alloc irq_desc for 177 on node 0
  alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
be2net 0000:1b:05.7: irq 177 for MSI/MSI-X
be2net 0000:1b:05.7: enabled 1 MSI-x vector(s)
be2net 0000:1b:05.7: created 0 RSS queue(s) and 1 default RX queue
be2net 0000:1b:05.7: created 1 TX queue(s)
be2net 0000:1b:05.7: Emulex OneConnect(be3): 10Gbps NIC  "90Y3554" VF vNIC port 0
be2net 0000:1b:06.0: enabling device (0040 -> 0042)
be2net 0000:1b:06.0: setting latency timer to 64
be2net 0000:1b:06.0: Could not use PCIe error reporting
  alloc irq_desc for 178 on node 0
  alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
be2net 0000:1b:06.0: irq 178 for MSI/MSI-X
be2net 0000:1b:06.0: enabled 1 MSI-x vector(s)
be2net 0000:1b:06.0: created 0 RSS queue(s) and 1 default RX queue
be2net 0000:1b:06.0: created 1 TX queue(s)
be2net 0000:1b:06.0: Emulex OneConnect(be3): 10Gbps NIC  "90Y3554" VF vNIC port 0
be2net 0000:1b:06.1: enabling device (0040 -> 0042)
be2net 0000:1b:06.1: setting latency timer to 64
be2net 0000:1b:06.1: Could not use PCIe error reporting
  alloc irq_desc for 179 on node 0
  alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
be2net 0000:1b:06.1: irq 179 for MSI/MSI-X
be2net 0000:1b:06.1: enabled 1 MSI-x vector(s)
be2net 0000:1b:06.1: created 0 RSS queue(s) and 1 default RX queue
be2net 0000:1b:06.1: created 1 TX queue(s)
be2net 0000:1b:06.1: Emulex OneConnect(be3): 10Gbps NIC  "90Y3554" VF vNIC port 0
be2net 0000:1b:06.2: enabling device (0040 -> 0042)
be2net 0000:1b:06.2: setting latency timer to 64
be2net 0000:1b:06.2: Could not use PCIe error reporting
  alloc irq_desc for 180 on node 0
  alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
be2net 0000:1b:06.2: irq 180 for MSI/MSI-X
be2net 0000:1b:06.2: enabled 1 MSI-x vector(s)
be2net 0000:1b:06.2: created 0 RSS queue(s) and 1 default RX queue
be2net 0000:1b:06.2: created 1 TX queue(s)
be2net 0000:1b:06.2: Emulex OneConnect(be3): 10Gbps NIC  "90Y3554" VF vNIC port 0
be2net 0000:1b:06.3: enabling device (0040 -> 0042)
be2net 0000:1b:06.3: setting latency timer to 64
be2net 0000:1b:06.3: Could not use PCIe error reporting
  alloc irq_desc for 181 on node 0
  alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
be2net 0000:1b:06.3: irq 181 for MSI/MSI-X
be2net 0000:1b:06.3: enabled 1 MSI-x vector(s)
be2net 0000:1b:06.3: created 0 RSS queue(s) and 1 default RX queue
be2net 0000:1b:06.3: created 1 TX queue(s)
be2net 0000:1b:06.3: Emulex OneConnect(be3): 10Gbps NIC  "90Y3554" VF vNIC port 0
be2net 0000:1b:06.4: enabling device (0040 -> 0042)
be2net 0000:1b:06.4: setting latency timer to 64
be2net 0000:1b:06.4: Could not use PCIe error reporting
  alloc irq_desc for 182 on node 0
  alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
be2net 0000:1b:06.4: irq 182 for MSI/MSI-X
be2net 0000:1b:06.4: enabled 1 MSI-x vector(s)
be2net 0000:1b:06.4: created 0 RSS queue(s) and 1 default RX queue
be2net 0000:1b:06.4: created 1 TX queue(s)
be2net 0000:1b:06.4: Emulex OneConnect(be3): 10Gbps NIC  "90Y3554" VF vNIC port 0
be2net 0000:1b:06.5: enabling device (0040 -> 0042)
be2net 0000:1b:06.5: setting latency timer to 64
be2net 0000:1b:06.5: Could not use PCIe error reporting
  alloc irq_desc for 183 on node 0
  alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
be2net 0000:1b:06.5: irq 183 for MSI/MSI-X
be2net 0000:1b:06.5: enabled 1 MSI-x vector(s)
be2net 0000:1b:06.5: created 0 RSS queue(s) and 1 default RX queue
be2net 0000:1b:06.5: created 1 TX queue(s)
be2net 0000:1b:06.5: Emulex OneConnect(be3): 10Gbps NIC  "90Y3554" VF vNIC port 0
be2net 0000:1b:06.6: enabling device (0040 -> 0042)
be2net 0000:1b:06.6: setting latency timer to 64
be2net 0000:1b:06.6: Could not use PCIe error reporting
  alloc irq_desc for 184 on node 0
  alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
be2net 0000:1b:06.6: irq 184 for MSI/MSI-X
be2net 0000:1b:06.6: enabled 1 MSI-x vector(s)
be2net 0000:1b:06.6: created 0 RSS queue(s) and 1 default RX queue
be2net 0000:1b:06.6: created 1 TX queue(s)
be2net 0000:1b:06.6: Emulex OneConnect(be3): 10Gbps NIC  "90Y3554" VF vNIC port 0
be2net 0000:1b:06.7: enabling device (0040 -> 0042)
be2net 0000:1b:06.7: setting latency timer to 64
be2net 0000:1b:06.7: Could not use PCIe error reporting
  alloc irq_desc for 185 on node 0
  alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
be2net 0000:1b:06.7: irq 185 for MSI/MSI-X
be2net 0000:1b:06.7: enabled 1 MSI-x vector(s)
be2net 0000:1b:06.7: created 0 RSS queue(s) and 1 default RX queue
be2net 0000:1b:06.7: created 1 TX queue(s)
be2net 0000:1b:06.7: Emulex OneConnect(be3): 10Gbps NIC  "90Y3554" VF vNIC port 0
be2net 0000:1b:07.0: enabling device (0040 -> 0042)
be2net 0000:1b:07.0: setting latency timer to 64
be2net 0000:1b:07.0: Could not use PCIe error reporting
  alloc irq_desc for 186 on node 0
  alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
be2net 0000:1b:07.0: irq 186 for MSI/MSI-X
be2net 0000:1b:07.0: enabled 1 MSI-x vector(s)
be2net 0000:1b:07.0: created 0 RSS queue(s) and 1 default RX queue
be2net 0000:1b:07.0: created 1 TX queue(s)
be2net 0000:1b:07.0: Emulex OneConnect(be3): 10Gbps NIC  "90Y3554" VF vNIC port 0
be2net 0000:1b:07.1: enabling device (0040 -> 0042)
be2net 0000:1b:07.1: setting latency timer to 64
be2net 0000:1b:07.1: Could not use PCIe error reporting
  alloc irq_desc for 187 on node 0
  alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
be2net 0000:1b:07.1: irq 187 for MSI/MSI-X
be2net 0000:1b:07.1: enabled 1 MSI-x vector(s)
be2net 0000:1b:07.1: created 0 RSS queue(s) and 1 default RX queue
be2net 0000:1b:07.1: created 1 TX queue(s)
be2net 0000:1b:07.1: Emulex OneConnect(be3): 10Gbps NIC  "90Y3554" VF vNIC port 0
be2net 0000:1b:07.2: enabling device (0040 -> 0042)
be2net 0000:1b:07.2: setting latency timer to 64
be2net 0000:1b:07.2: Could not use PCIe error reporting
  alloc irq_desc for 188 on node 0
  alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
be2net 0000:1b:07.2: irq 188 for MSI/MSI-X
be2net 0000:1b:07.2: enabled 1 MSI-x vector(s)
be2net 0000:1b:07.2: created 0 RSS queue(s) and 1 default RX queue
be2net 0000:1b:07.2: created 1 TX queue(s)
be2net 0000:1b:07.2: Emulex OneConnect(be3): 10Gbps NIC  "90Y3554" VF vNIC port 0
be2net 0000:1b:07.3: enabling device (0040 -> 0042)
be2net 0000:1b:07.3: setting latency timer to 64
be2net 0000:1b:07.3: Could not use PCIe error reporting
  alloc irq_desc for 189 on node 0
  alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
be2net 0000:1b:07.3: irq 189 for MSI/MSI-X
be2net 0000:1b:07.3: enabled 1 MSI-x vector(s)
be2net 0000:1b:07.3: created 0 RSS queue(s) and 1 default RX queue
be2net 0000:1b:07.3: created 1 TX queue(s)
be2net 0000:1b:07.3: Emulex OneConnect(be3): 10Gbps NIC  "90Y3554" VF vNIC port 0
be2net 0000:1b:07.4: enabling device (0040 -> 0042)
be2net 0000:1b:07.4: setting latency timer to 64
be2net 0000:1b:07.4: Could not use PCIe error reporting
  alloc irq_desc for 190 on node 0
  alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
be2net 0000:1b:07.4: irq 190 for MSI/MSI-X
be2net 0000:1b:07.4: enabled 1 MSI-x vector(s)
be2net 0000:1b:07.4: created 0 RSS queue(s) and 1 default RX queue
be2net 0000:1b:07.4: created 1 TX queue(s)
be2net 0000:1b:07.4: Emulex OneConnect(be3): 10Gbps NIC  "90Y3554" VF vNIC port 0
be2net 0000:1b:07.5: enabling device (0040 -> 0042)
be2net 0000:1b:07.5: setting latency timer to 64
be2net 0000:1b:07.5: Could not use PCIe error reporting
  alloc irq_desc for 191 on node 0
  alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
be2net 0000:1b:07.5: irq 191 for MSI/MSI-X
be2net 0000:1b:07.5: enabled 1 MSI-x vector(s)
be2net 0000:1b:07.5: created 0 RSS queue(s) and 1 default RX queue
be2net 0000:1b:07.5: created 1 TX queue(s)
be2net 0000:1b:07.5: Emulex OneConnect(be3): 10Gbps NIC  "90Y3554" VF vNIC port 0
be2net 0000:1b:08.0: enabling device (0040 -> 0042)
be2net 0000:1b:08.0: setting latency timer to 64
be2net 0000:1b:08.0: Could not use PCIe error reporting
  alloc irq_desc for 192 on node 0
  alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
be2net 0000:1b:08.0: irq 192 for MSI/MSI-X
be2net 0000:1b:08.0: enabled 1 MSI-x vector(s)
be2net 0000:1b:08.0: created 0 RSS queue(s) and 1 default RX queue
be2net 0000:1b:08.0: created 1 TX queue(s)
be2net 0000:1b:08.0: VF is not privileged to issue opcode 36-1
be2net 0000:1b:08.0: Emulex OneConnect(be3): 10Gbps NIC  "90Y3554" VF vNIC port 1
be2net 0000:1b:08.1: enabling device (0040 -> 0042)
be2net 0000:1b:08.1: setting latency timer to 64
be2net 0000:1b:08.1: Could not use PCIe error reporting
  alloc irq_desc for 193 on node 0
  alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
be2net 0000:1b:08.1: irq 193 for MSI/MSI-X
be2net 0000:1b:08.1: enabled 1 MSI-x vector(s)
be2net 0000:1b:08.1: created 0 RSS queue(s) and 1 default RX queue
be2net 0000:1b:08.1: created 1 TX queue(s)
be2net 0000:1b:08.1: VF is not privileged to issue opcode 36-1
be2net 0000:1b:08.1: Emulex OneConnect(be3): 10Gbps NIC  "90Y3554" VF vNIC port 1
be2net 0000:1b:08.2: enabling device (0040 -> 0042)
be2net 0000:1b:08.2: setting latency timer to 64
be2net 0000:1b:08.2: Could not use PCIe error reporting
  alloc irq_desc for 194 on node 0
  alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
be2net 0000:1b:08.2: irq 194 for MSI/MSI-X
be2net 0000:1b:08.2: enabled 1 MSI-x vector(s)
be2net 0000:1b:08.2: created 0 RSS queue(s) and 1 default RX queue
be2net 0000:1b:08.2: created 1 TX queue(s)
be2net 0000:1b:08.2: VF is not privileged to issue opcode 36-1
be2net 0000:1b:08.2: Emulex OneConnect(be3): 10Gbps NIC  "90Y3554" VF vNIC port 1
be2net 0000:1b:08.3: enabling device (0040 -> 0042)
be2net 0000:1b:08.3: setting latency timer to 64
be2net 0000:1b:08.3: Could not use PCIe error reporting
  alloc irq_desc for 195 on node 0
  alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
be2net 0000:1b:08.3: irq 195 for MSI/MSI-X
be2net 0000:1b:08.3: enabled 1 MSI-x vector(s)
be2net 0000:1b:08.3: created 0 RSS queue(s) and 1 default RX queue
be2net 0000:1b:08.3: created 1 TX queue(s)
be2net 0000:1b:08.3: VF is not privileged to issue opcode 36-1
be2net 0000:1b:08.3: Emulex OneConnect(be3): 10Gbps NIC  "90Y3554" VF vNIC port 1
be2net 0000:1b:08.4: enabling device (0040 -> 0042)
be2net 0000:1b:08.4: setting latency timer to 64
be2net 0000:1b:08.4: Could not use PCIe error reporting
  alloc irq_desc for 196 on node 0
  alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
be2net 0000:1b:08.4: irq 196 for MSI/MSI-X
be2net 0000:1b:08.4: enabled 1 MSI-x vector(s)
be2net 0000:1b:08.4: created 0 RSS queue(s) and 1 default RX queue
be2net 0000:1b:08.4: created 1 TX queue(s)
be2net 0000:1b:08.4: VF is not privileged to issue opcode 36-1
be2net 0000:1b:08.4: Emulex OneConnect(be3): 10Gbps NIC  "90Y3554" VF vNIC port 1
be2net 0000:1b:08.5: enabling device (0040 -> 0042)
be2net 0000:1b:08.5: setting latency timer to 64
be2net 0000:1b:08.5: Could not use PCIe error reporting
  alloc irq_desc for 197 on node 0
  alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
be2net 0000:1b:08.5: irq 197 for MSI/MSI-X
be2net 0000:1b:08.5: enabled 1 MSI-x vector(s)
be2net 0000:1b:08.5: created 0 RSS queue(s) and 1 default RX queue
be2net 0000:1b:08.5: created 1 TX queue(s)
be2net 0000:1b:08.5: VF is not privileged to issue opcode 36-1
be2net 0000:1b:08.5: Emulex OneConnect(be3): 10Gbps NIC  "90Y3554" VF vNIC port 1
be2net 0000:1b:08.6: enabling device (0040 -> 0042)
be2net 0000:1b:08.6: setting latency timer to 64
be2net 0000:1b:08.6: Could not use PCIe error reporting
  alloc irq_desc for 198 on node 0
  alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
be2net 0000:1b:08.6: irq 198 for MSI/MSI-X
be2net 0000:1b:08.6: enabled 1 MSI-x vector(s)
be2net 0000:1b:08.6: created 0 RSS queue(s) and 1 default RX queue
be2net 0000:1b:08.6: created 1 TX queue(s)
be2net 0000:1b:08.6: VF is not privileged to issue opcode 36-1
be2net 0000:1b:08.6: Emulex OneConnect(be3): 10Gbps NIC  "90Y3554" VF vNIC port 1
be2net 0000:1b:08.7: enabling device (0040 -> 0042)
be2net 0000:1b:08.7: setting latency timer to 64
be2net 0000:1b:08.7: Could not use PCIe error reporting
  alloc irq_desc for 199 on node 0
  alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
be2net 0000:1b:08.7: irq 199 for MSI/MSI-X
be2net 0000:1b:08.7: enabled 1 MSI-x vector(s)
be2net 0000:1b:08.7: created 0 RSS queue(s) and 1 default RX queue
be2net 0000:1b:08.7: created 1 TX queue(s)
be2net 0000:1b:08.7: VF is not privileged to issue opcode 36-1
be2net 0000:1b:08.7: Emulex OneConnect(be3): 10Gbps NIC  "90Y3554" VF vNIC port 1
be2net 0000:1b:09.0: enabling device (0040 -> 0042)
be2net 0000:1b:09.0: setting latency timer to 64
be2net 0000:1b:09.0: Could not use PCIe error reporting
  alloc irq_desc for 200 on node 0
  alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
be2net 0000:1b:09.0: irq 200 for MSI/MSI-X
be2net 0000:1b:09.0: enabled 1 MSI-x vector(s)
be2net 0000:1b:09.0: created 0 RSS queue(s) and 1 default RX queue
be2net 0000:1b:09.0: created 1 TX queue(s)
be2net 0000:1b:09.0: VF is not privileged to issue opcode 36-1
be2net 0000:1b:09.0: Emulex OneConnect(be3): 10Gbps NIC  "90Y3554" VF vNIC port 1
be2net 0000:1b:09.1: enabling device (0040 -> 0042)
be2net 0000:1b:09.1: setting latency timer to 64
be2net 0000:1b:09.1: Could not use PCIe error reporting
  alloc irq_desc for 201 on node 0
  alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
be2net 0000:1b:09.1: irq 201 for MSI/MSI-X
be2net 0000:1b:09.1: enabled 1 MSI-x vector(s)
be2net 0000:1b:09.1: created 0 RSS queue(s) and 1 default RX queue
be2net 0000:1b:09.1: created 1 TX queue(s)
be2net 0000:1b:09.1: VF is not privileged to issue opcode 36-1
be2net 0000:1b:09.1: Emulex OneConnect(be3): 10Gbps NIC  "90Y3554" VF vNIC port 1
be2net 0000:1b:09.2: enabling device (0040 -> 0042)
be2net 0000:1b:09.2: setting latency timer to 64
be2net 0000:1b:09.2: Could not use PCIe error reporting
  alloc irq_desc for 202 on node 0
  alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
be2net 0000:1b:09.2: irq 202 for MSI/MSI-X
be2net 0000:1b:09.2: enabled 1 MSI-x vector(s)
be2net 0000:1b:09.2: created 0 RSS queue(s) and 1 default RX queue
be2net 0000:1b:09.2: created 1 TX queue(s)
be2net 0000:1b:09.2: VF is not privileged to issue opcode 36-1
be2net 0000:1b:09.2: Emulex OneConnect(be3): 10Gbps NIC  "90Y3554" VF vNIC port 1
be2net 0000:1b:09.3: enabling device (0040 -> 0042)
be2net 0000:1b:09.3: setting latency timer to 64
be2net 0000:1b:09.3: Could not use PCIe error reporting
  alloc irq_desc for 203 on node 0
  alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
be2net 0000:1b:09.3: irq 203 for MSI/MSI-X
be2net 0000:1b:09.3: enabled 1 MSI-x vector(s)
be2net 0000:1b:09.3: created 0 RSS queue(s) and 1 default RX queue
be2net 0000:1b:09.3: created 1 TX queue(s)
be2net 0000:1b:09.3: VF is not privileged to issue opcode 36-1
be2net 0000:1b:09.3: Emulex OneConnect(be3): 10Gbps NIC  "90Y3554" VF vNIC port 1
be2net 0000:1b:09.4: enabling device (0040 -> 0042)
be2net 0000:1b:09.4: setting latency timer to 64
be2net 0000:1b:09.4: Could not use PCIe error reporting
  alloc irq_desc for 204 on node 0
  alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
be2net 0000:1b:09.4: irq 204 for MSI/MSI-X
be2net 0000:1b:09.4: enabled 1 MSI-x vector(s)
be2net 0000:1b:09.4: created 0 RSS queue(s) and 1 default RX queue
be2net 0000:1b:09.4: created 1 TX queue(s)
be2net 0000:1b:09.4: VF is not privileged to issue opcode 36-1
be2net 0000:1b:09.4: Emulex OneConnect(be3): 10Gbps NIC  "90Y3554" VF vNIC port 1
be2net 0000:1b:09.5: enabling device (0040 -> 0042)
be2net 0000:1b:09.5: setting latency timer to 64
be2net 0000:1b:09.5: Could not use PCIe error reporting
  alloc irq_desc for 205 on node 0
  alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
be2net 0000:1b:09.5: irq 205 for MSI/MSI-X
be2net 0000:1b:09.5: enabled 1 MSI-x vector(s)
be2net 0000:1b:09.5: created 0 RSS queue(s) and 1 default RX queue
be2net 0000:1b:09.5: created 1 TX queue(s)
be2net 0000:1b:09.5: VF is not privileged to issue opcode 36-1
be2net 0000:1b:09.5: Emulex OneConnect(be3): 10Gbps NIC  "90Y3554" VF vNIC port 1
be2net 0000:1b:09.6: enabling device (0040 -> 0042)
be2net 0000:1b:09.6: setting latency timer to 64
be2net 0000:1b:09.6: Could not use PCIe error reporting
  alloc irq_desc for 206 on node 0
  alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
be2net 0000:1b:09.6: irq 206 for MSI/MSI-X
be2net 0000:1b:09.6: enabled 1 MSI-x vector(s)
be2net 0000:1b:09.6: created 0 RSS queue(s) and 1 default RX queue
be2net 0000:1b:09.6: created 1 TX queue(s)
be2net 0000:1b:09.6: VF is not privileged to issue opcode 36-1
be2net 0000:1b:09.6: Emulex OneConnect(be3): 10Gbps NIC  "90Y3554" VF vNIC port 1
be2net 0000:1b:09.7: enabling device (0040 -> 0042)
be2net 0000:1b:09.7: setting latency timer to 64
be2net 0000:1b:09.7: Could not use PCIe error reporting
  alloc irq_desc for 207 on node 0
  alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
be2net 0000:1b:09.7: irq 207 for MSI/MSI-X
be2net 0000:1b:09.7: enabled 1 MSI-x vector(s)
be2net 0000:1b:09.7: created 0 RSS queue(s) and 1 default RX queue
be2net 0000:1b:09.7: created 1 TX queue(s)
be2net 0000:1b:09.7: VF is not privileged to issue opcode 36-1
be2net 0000:1b:09.7: Emulex OneConnect(be3): 10Gbps NIC  "90Y3554" VF vNIC port 1
be2net 0000:1b:0a.0: enabling device (0040 -> 0042)
be2net 0000:1b:0a.0: setting latency timer to 64
be2net 0000:1b:0a.0: Could not use PCIe error reporting
  alloc irq_desc for 208 on node 0
  alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
be2net 0000:1b:0a.0: irq 208 for MSI/MSI-X
be2net 0000:1b:0a.0: enabled 1 MSI-x vector(s)
be2net 0000:1b:0a.0: created 0 RSS queue(s) and 1 default RX queue
be2net 0000:1b:0a.0: created 1 TX queue(s)
be2net 0000:1b:0a.0: VF is not privileged to issue opcode 36-1
be2net 0000:1b:0a.0: Emulex OneConnect(be3): 10Gbps NIC  "90Y3554" VF vNIC port 1
be2net 0000:1b:0a.1: enabling device (0040 -> 0042)
be2net 0000:1b:0a.1: setting latency timer to 64
be2net 0000:1b:0a.1: Could not use PCIe error reporting
  alloc irq_desc for 209 on node 0
  alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
be2net 0000:1b:0a.1: irq 209 for MSI/MSI-X
be2net 0000:1b:0a.1: enabled 1 MSI-x vector(s)
be2net 0000:1b:0a.1: created 0 RSS queue(s) and 1 default RX queue
be2net 0000:1b:0a.1: created 1 TX queue(s)
be2net 0000:1b:0a.1: VF is not privileged to issue opcode 36-1
be2net 0000:1b:0a.1: Emulex OneConnect(be3): 10Gbps NIC  "90Y3554" VF vNIC port 1
be2net 0000:1b:0a.2: enabling device (0040 -> 0042)
be2net 0000:1b:0a.2: setting latency timer to 64
be2net 0000:1b:0a.2: Could not use PCIe error reporting
  alloc irq_desc for 210 on node 0
  alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
be2net 0000:1b:0a.2: irq 210 for MSI/MSI-X
be2net 0000:1b:0a.2: enabled 1 MSI-x vector(s)
be2net 0000:1b:0a.2: created 0 RSS queue(s) and 1 default RX queue
be2net 0000:1b:0a.2: created 1 TX queue(s)
be2net 0000:1b:0a.2: VF is not privileged to issue opcode 36-1
be2net 0000:1b:0a.2: Emulex OneConnect(be3): 10Gbps NIC  "90Y3554" VF vNIC port 1
be2net 0000:1b:0a.3: enabling device (0040 -> 0042)
be2net 0000:1b:0a.3: setting latency timer to 64
be2net 0000:1b:0a.3: Could not use PCIe error reporting
  alloc irq_desc for 211 on node 0
  alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
be2net 0000:1b:0a.3: irq 211 for MSI/MSI-X
be2net 0000:1b:0a.3: enabled 1 MSI-x vector(s)
be2net 0000:1b:0a.3: created 0 RSS queue(s) and 1 default RX queue
be2net 0000:1b:0a.3: created 1 TX queue(s)
be2net 0000:1b:0a.3: VF is not privileged to issue opcode 36-1
be2net 0000:1b:0a.3: Emulex OneConnect(be3): 10Gbps NIC  "90Y3554" VF vNIC port 1
be2net 0000:1b:0a.4: enabling device (0040 -> 0042)
be2net 0000:1b:0a.4: setting latency timer to 64
be2net 0000:1b:0a.4: Could not use PCIe error reporting
  alloc irq_desc for 212 on node 0
  alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
be2net 0000:1b:0a.4: irq 212 for MSI/MSI-X
be2net 0000:1b:0a.4: enabled 1 MSI-x vector(s)
be2net 0000:1b:0a.4: created 0 RSS queue(s) and 1 default RX queue
be2net 0000:1b:0a.4: created 1 TX queue(s)
be2net 0000:1b:0a.4: VF is not privileged to issue opcode 36-1
be2net 0000:1b:0a.4: Emulex OneConnect(be3): 10Gbps NIC  "90Y3554" VF vNIC port 1
be2net 0000:1b:0a.5: enabling device (0040 -> 0042)
be2net 0000:1b:0a.5: setting latency timer to 64
be2net 0000:1b:0a.5: Could not use PCIe error reporting
  alloc irq_desc for 213 on node 0
  alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
be2net 0000:1b:0a.5: irq 213 for MSI/MSI-X
be2net 0000:1b:0a.5: enabled 1 MSI-x vector(s)
be2net 0000:1b:0a.5: created 0 RSS queue(s) and 1 default RX queue
be2net 0000:1b:0a.5: created 1 TX queue(s)
be2net 0000:1b:0a.5: VF is not privileged to issue opcode 36-1
be2net 0000:1b:0a.5: Emulex OneConnect(be3): 10Gbps NIC  "90Y3554" VF vNIC port 1
be2net 0000:1b:0a.6: enabling device (0040 -> 0042)
be2net 0000:1b:0a.6: setting latency timer to 64
be2net 0000:1b:0a.6: Could not use PCIe error reporting
  alloc irq_desc for 214 on node 0
  alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
be2net 0000:1b:0a.6: irq 214 for MSI/MSI-X
be2net 0000:1b:0a.6: enabled 1 MSI-x vector(s)
be2net 0000:1b:0a.6: created 0 RSS queue(s) and 1 default RX queue
be2net 0000:1b:0a.6: created 1 TX queue(s)
be2net 0000:1b:0a.6: VF is not privileged to issue opcode 36-1
be2net 0000:1b:0a.6: Emulex OneConnect(be3): 10Gbps NIC  "90Y3554" VF vNIC port 1
be2net 0000:1b:0a.7: enabling device (0040 -> 0042)
be2net 0000:1b:0a.7: setting latency timer to 64
be2net 0000:1b:0a.7: Could not use PCIe error reporting
  alloc irq_desc for 215 on node 0
  alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
be2net 0000:1b:0a.7: irq 215 for MSI/MSI-X
be2net 0000:1b:0a.7: enabled 1 MSI-x vector(s)
be2net 0000:1b:0a.7: created 0 RSS queue(s) and 1 default RX queue
be2net 0000:1b:0a.7: created 1 TX queue(s)
be2net 0000:1b:0a.7: VF is not privileged to issue opcode 36-1
be2net 0000:1b:0a.7: Emulex OneConnect(be3): 10Gbps NIC  "90Y3554" VF vNIC port 1
be2net 0000:1b:0b.0: enabling device (0040 -> 0042)
be2net 0000:1b:0b.0: setting latency timer to 64
be2net 0000:1b:0b.0: Could not use PCIe error reporting
  alloc irq_desc for 216 on node 0
  alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
be2net 0000:1b:0b.0: irq 216 for MSI/MSI-X
be2net 0000:1b:0b.0: enabled 1 MSI-x vector(s)
be2net 0000:1b:0b.0: created 0 RSS queue(s) and 1 default RX queue
be2net 0000:1b:0b.0: created 1 TX queue(s)
be2net 0000:1b:0b.0: VF is not privileged to issue opcode 36-1
be2net 0000:1b:0b.0: Emulex OneConnect(be3): 10Gbps NIC  "90Y3554" VF vNIC port 1
be2net 0000:1b:0b.1: enabling device (0040 -> 0042)
be2net 0000:1b:0b.1: setting latency timer to 64
be2net 0000:1b:0b.1: Could not use PCIe error reporting
  alloc irq_desc for 217 on node 0
  alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
be2net 0000:1b:0b.1: irq 217 for MSI/MSI-X
be2net 0000:1b:0b.1: enabled 1 MSI-x vector(s)
be2net 0000:1b:0b.1: created 0 RSS queue(s) and 1 default RX queue
be2net 0000:1b:0b.1: created 1 TX queue(s)
be2net 0000:1b:0b.1: VF is not privileged to issue opcode 36-1
be2net 0000:1b:0b.1: Emulex OneConnect(be3): 10Gbps NIC  "90Y3554" VF vNIC port 1
be2net 0000:1b:0b.2: enabling device (0040 -> 0042)
be2net 0000:1b:0b.2: setting latency timer to 64
be2net 0000:1b:0b.2: Could not use PCIe error reporting
  alloc irq_desc for 218 on node 0
  alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
be2net 0000:1b:0b.2: irq 218 for MSI/MSI-X
be2net 0000:1b:0b.2: enabled 1 MSI-x vector(s)
be2net 0000:1b:0b.2: created 0 RSS queue(s) and 1 default RX queue
be2net 0000:1b:0b.2: created 1 TX queue(s)
be2net 0000:1b:0b.2: VF is not privileged to issue opcode 36-1
be2net 0000:1b:0b.2: Emulex OneConnect(be3): 10Gbps NIC  "90Y3554" VF vNIC port 1
be2net 0000:1b:0b.3: enabling device (0040 -> 0042)
be2net 0000:1b:0b.3: setting latency timer to 64
be2net 0000:1b:0b.3: Could not use PCIe error reporting
  alloc irq_desc for 219 on node 0
  alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
be2net 0000:1b:0b.3: irq 219 for MSI/MSI-X
be2net 0000:1b:0b.3: enabled 1 MSI-x vector(s)
be2net 0000:1b:0b.3: created 0 RSS queue(s) and 1 default RX queue
be2net 0000:1b:0b.3: created 1 TX queue(s)
be2net 0000:1b:0b.3: VF is not privileged to issue opcode 36-1
be2net 0000:1b:0b.3: Emulex OneConnect(be3): 10Gbps NIC  "90Y3554" VF vNIC port 1
be2net 0000:1b:0b.4: enabling device (0040 -> 0042)
be2net 0000:1b:0b.4: setting latency timer to 64
be2net 0000:1b:0b.4: Could not use PCIe error reporting
  alloc irq_desc for 220 on node 0
  alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
be2net 0000:1b:0b.4: irq 220 for MSI/MSI-X
be2net 0000:1b:0b.4: enabled 1 MSI-x vector(s)
be2net 0000:1b:0b.4: created 0 RSS queue(s) and 1 default RX queue
be2net 0000:1b:0b.4: created 1 TX queue(s)
be2net 0000:1b:0b.4: VF is not privileged to issue opcode 36-1
be2net 0000:1b:0b.4: Emulex OneConnect(be3): 10Gbps NIC  "90Y3554" VF vNIC port 1
be2net 0000:1b:0b.5: enabling device (0040 -> 0042)
be2net 0000:1b:0b.5: setting latency timer to 64
be2net 0000:1b:0b.5: Could not use PCIe error reporting
  alloc irq_desc for 221 on node 0
  alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
be2net 0000:1b:0b.5: irq 221 for MSI/MSI-X
be2net 0000:1b:0b.5: enabled 1 MSI-x vector(s)
be2net 0000:1b:0b.5: created 0 RSS queue(s) and 1 default RX queue
be2net 0000:1b:0b.5: created 1 TX queue(s)
be2net 0000:1b:0b.5: VF is not privileged to issue opcode 36-1
be2net 0000:1b:0b.5: Emulex OneConnect(be3): 10Gbps NIC  "90Y3554" VF vNIC port 1
dca service started, version 1.12.1
ioatdma: Intel(R) QuickData Technology Driver 4.00
  alloc irq_desc for 31 on node 0
  alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
ioatdma 0000:00:04.0: PCI INT A -> GSI 31 (level, low) -> IRQ 31
ioatdma 0000:00:04.0: setting latency timer to 64
  alloc irq_desc for 222 on node 0
  alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
ioatdma 0000:00:04.0: irq 222 for MSI/MSI-X
  alloc irq_desc for 39 on node 0
  alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
ioatdma 0000:00:04.1: PCI INT B -> GSI 39 (level, low) -> IRQ 39
ioatdma 0000:00:04.1: setting latency timer to 64
  alloc irq_desc for 223 on node 0
  alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
ioatdma 0000:00:04.1: irq 223 for MSI/MSI-X
ioatdma 0000:00:04.2: PCI INT C -> GSI 31 (level, low) -> IRQ 31
ioatdma 0000:00:04.2: setting latency timer to 64
  alloc irq_desc for 224 on node 0
  alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
ioatdma 0000:00:04.2: irq 224 for MSI/MSI-X
ioatdma 0000:00:04.3: PCI INT D -> GSI 39 (level, low) -> IRQ 39
ioatdma 0000:00:04.3: setting latency timer to 64
  alloc irq_desc for 225 on node 0
  alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
ioatdma 0000:00:04.3: irq 225 for MSI/MSI-X
ioatdma 0000:00:04.4: PCI INT A -> GSI 31 (level, low) -> IRQ 31
ioatdma 0000:00:04.4: setting latency timer to 64
  alloc irq_desc for 226 on node 0
  alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
ioatdma 0000:00:04.4: irq 226 for MSI/MSI-X
ioatdma 0000:00:04.5: PCI INT B -> GSI 39 (level, low) -> IRQ 39
ioatdma 0000:00:04.5: setting latency timer to 64
  alloc irq_desc for 227 on node 0
  alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
ioatdma 0000:00:04.5: irq 227 for MSI/MSI-X
ioatdma 0000:00:04.6: PCI INT C -> GSI 31 (level, low) -> IRQ 31
ioatdma 0000:00:04.6: setting latency timer to 64
  alloc irq_desc for 228 on node 0
  alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
ioatdma 0000:00:04.6: irq 228 for MSI/MSI-X
ioatdma 0000:00:04.7: PCI INT D -> GSI 39 (level, low) -> IRQ 39
ioatdma 0000:00:04.7: setting latency timer to 64
  alloc irq_desc for 229 on node 0
  alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
ioatdma 0000:00:04.7: irq 229 for MSI/MSI-X
  alloc irq_desc for 55 on node 1
  alloc kstat_irqs on node 1
alloc irq_2_iommu on node 1
ioatdma 0000:80:04.0: PCI INT A -> GSI 55 (level, low) -> IRQ 55
ioatdma 0000:80:04.0: setting latency timer to 64
  alloc irq_desc for 230 on node 1
  alloc kstat_irqs on node 1
alloc irq_2_iommu on node 1
ioatdma 0000:80:04.0: irq 230 for MSI/MSI-X
  alloc irq_desc for 63 on node 1
  alloc kstat_irqs on node 1
alloc irq_2_iommu on node 1
ioatdma 0000:80:04.1: PCI INT B -> GSI 63 (level, low) -> IRQ 63
ioatdma 0000:80:04.1: setting latency timer to 64
  alloc irq_desc for 231 on node 1
  alloc kstat_irqs on node 1
alloc irq_2_iommu on node 1
ioatdma 0000:80:04.1: irq 231 for MSI/MSI-X
ioatdma 0000:80:04.2: PCI INT C -> GSI 55 (level, low) -> IRQ 55
ioatdma 0000:80:04.2: setting latency timer to 64
  alloc irq_desc for 232 on node 1
  alloc kstat_irqs on node 1
alloc irq_2_iommu on node 1
ioatdma 0000:80:04.2: irq 232 for MSI/MSI-X
ioatdma 0000:80:04.3: PCI INT D -> GSI 63 (level, low) -> IRQ 63
ioatdma 0000:80:04.3: setting latency timer to 64
  alloc irq_desc for 233 on node 1
  alloc kstat_irqs on node 1
alloc irq_2_iommu on node 1
ioatdma 0000:80:04.3: irq 233 for MSI/MSI-X
ioatdma 0000:80:04.4: PCI INT A -> GSI 55 (level, low) -> IRQ 55
ioatdma 0000:80:04.4: setting latency timer to 64
  alloc irq_desc for 234 on node 1
  alloc kstat_irqs on node 1
alloc irq_2_iommu on node 1
ioatdma 0000:80:04.4: irq 234 for MSI/MSI-X
ioatdma 0000:80:04.5: PCI INT B -> GSI 63 (level, low) -> IRQ 63
ioatdma 0000:80:04.5: setting latency timer to 64
  alloc irq_desc for 235 on node 1
  alloc kstat_irqs on node 1
alloc irq_2_iommu on node 1
ioatdma 0000:80:04.5: irq 235 for MSI/MSI-X
ioatdma 0000:80:04.6: PCI INT C -> GSI 55 (level, low) -> IRQ 55
ioatdma 0000:80:04.6: setting latency timer to 64
  alloc irq_desc for 236 on node 1
  alloc kstat_irqs on node 1
alloc irq_2_iommu on node 1
ioatdma 0000:80:04.6: irq 236 for MSI/MSI-X
ioatdma 0000:80:04.7: PCI INT D -> GSI 63 (level, low) -> IRQ 63
ioatdma 0000:80:04.7: setting latency timer to 64
  alloc irq_desc for 237 on node 1
  alloc kstat_irqs on node 1
alloc irq_2_iommu on node 1
ioatdma 0000:80:04.7: irq 237 for MSI/MSI-X
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
iTCO_vendor_support: vendor-support=0
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07rh
iTCO_wdt: unable to reset NO_REBOOT flag, device disabled by hardware/BIOS
  alloc irq_desc for 18 on node 0
  alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
32bit 0000:00:1f.3 uses non-identity mapping
usb0: register 'cdc_ether' at usb-0000:00:1d.0-1.1.5, CDC Ethernet Device, 5e:f3:fc:6e:02:bf
usbcore: registered new interface driver cdc_ether
microcode: CPU0 sig=0x206d6, pf=0x1, revision=0x619
platform microcode: firmware: requesting intel-ucode/06-2d-06
microcode: CPU1 sig=0x206d6, pf=0x1, revision=0x619
platform microcode: firmware: requesting intel-ucode/06-2d-06
microcode: CPU2 sig=0x206d6, pf=0x1, revision=0x619
platform microcode: firmware: requesting intel-ucode/06-2d-06
microcode: CPU3 sig=0x206d6, pf=0x1, revision=0x619
platform microcode: firmware: requesting intel-ucode/06-2d-06
microcode: CPU4 sig=0x206d6, pf=0x1, revision=0x619
platform microcode: firmware: requesting intel-ucode/06-2d-06
microcode: CPU5 sig=0x206d6, pf=0x1, revision=0x619
platform microcode: firmware: requesting intel-ucode/06-2d-06
microcode: CPU6 sig=0x206d6, pf=0x1, revision=0x619
platform microcode: firmware: requesting intel-ucode/06-2d-06
microcode: CPU7 sig=0x206d6, pf=0x1, revision=0x619
platform microcode: firmware: requesting intel-ucode/06-2d-06
microcode: CPU8 sig=0x206d6, pf=0x1, revision=0x619
platform microcode: firmware: requesting intel-ucode/06-2d-06
microcode: CPU9 sig=0x206d6, pf=0x1, revision=0x619
platform microcode: firmware: requesting intel-ucode/06-2d-06
microcode: CPU10 sig=0x206d6, pf=0x1, revision=0x619
platform microcode: firmware: requesting intel-ucode/06-2d-06
microcode: CPU11 sig=0x206d6, pf=0x1, revision=0x619
platform microcode: firmware: requesting intel-ucode/06-2d-06
microcode: CPU12 sig=0x206d6, pf=0x1, revision=0x619
platform microcode: firmware: requesting intel-ucode/06-2d-06
microcode: CPU13 sig=0x206d6, pf=0x1, revision=0x619
platform microcode: firmware: requesting intel-ucode/06-2d-06
microcode: CPU14 sig=0x206d6, pf=0x1, revision=0x619
platform microcode: firmware: requesting intel-ucode/06-2d-06
microcode: CPU15 sig=0x206d6, pf=0x1, revision=0x619
platform microcode: firmware: requesting intel-ucode/06-2d-06
microcode: CPU16 sig=0x206d6, pf=0x1, revision=0x619
platform microcode: firmware: requesting intel-ucode/06-2d-06
microcode: CPU17 sig=0x206d6, pf=0x1, revision=0x619
platform microcode: firmware: requesting intel-ucode/06-2d-06
microcode: CPU18 sig=0x206d6, pf=0x1, revision=0x619
platform microcode: firmware: requesting intel-ucode/06-2d-06
microcode: CPU19 sig=0x206d6, pf=0x1, revision=0x619
platform microcode: firmware: requesting intel-ucode/06-2d-06
microcode: CPU20 sig=0x206d6, pf=0x1, revision=0x619
platform microcode: firmware: requesting intel-ucode/06-2d-06
microcode: CPU21 sig=0x206d6, pf=0x1, revision=0x619
platform microcode: firmware: requesting intel-ucode/06-2d-06
microcode: CPU22 sig=0x206d6, pf=0x1, revision=0x619
platform microcode: firmware: requesting intel-ucode/06-2d-06
microcode: CPU23 sig=0x206d6, pf=0x1, revision=0x619
platform microcode: firmware: requesting intel-ucode/06-2d-06
microcode: CPU24 sig=0x206d6, pf=0x1, revision=0x619
platform microcode: firmware: requesting intel-ucode/06-2d-06
microcode: CPU25 sig=0x206d6, pf=0x1, revision=0x619
platform microcode: firmware: requesting intel-ucode/06-2d-06
microcode: CPU26 sig=0x206d6, pf=0x1, revision=0x619
platform microcode: firmware: requesting intel-ucode/06-2d-06
microcode: CPU27 sig=0x206d6, pf=0x1, revision=0x619
platform microcode: firmware: requesting intel-ucode/06-2d-06
microcode: CPU28 sig=0x206d6, pf=0x1, revision=0x619
platform microcode: firmware: requesting intel-ucode/06-2d-06
microcode: CPU29 sig=0x206d6, pf=0x1, revision=0x619
platform microcode: firmware: requesting intel-ucode/06-2d-06
microcode: CPU30 sig=0x206d6, pf=0x1, revision=0x619
platform microcode: firmware: requesting intel-ucode/06-2d-06
microcode: CPU31 sig=0x206d6, pf=0x1, revision=0x619
platform microcode: firmware: requesting intel-ucode/06-2d-06
Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
sd 0:1:0:0: Attached scsi generic sg0 type 0
scsi 0:0:0:0: Attached scsi generic sg1 type 0
scsi 0:0:1:0: Attached scsi generic sg2 type 0
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
kjournald starting.  Commit interval 5 seconds
EXT3-fs (sda1): using internal journal
EXT3-fs (sda1): mounted filesystem with ordered data mode
Adding 20479992k swap on /dev/sda3.  Priority:-1 extents:1 across:20479992k 
