| Hewlett Packard Enterprise ProLiant DL325 Gen10 | SPECpower_ssj2008 = 17,349 overall ssj_ops/watt | ||||
| Test Sponsor: | Hewlett Packard Enterprise | SPEC License #: | 3 | Test Method: | Single Node |
| Tested By: | Hewlett Packard Enterprise | Test Location: | Houston, TX, USA | Test Date: | Oct 1, 2018 |
| Hardware Availability: | Aug-2019 | Software Availability: | Jul-2019 | Publication: | Aug 7, 2019 |
| System Source: | Single Supplier | System Designation: | Server | Power Provisioning: | Line-powered |
| Performance | Power | Performance to Power Ratio | ||
|---|---|---|---|---|
| Target Load | Actual Load | ssj_ops | Average Active Power (W) | |
| 100% | 99.5% | 5,801,076 | 230 | 25,194 |
| 90% | 89.9% | 5,242,259 | 218 | 23,995 |
| 80% | 80.0% | 4,664,078 | 207 | 22,541 |
| 70% | 70.0% | 4,080,521 | 195 | 20,900 |
| 60% | 60.0% | 3,499,172 | 185 | 18,947 |
| 50% | 50.1% | 2,917,502 | 175 | 16,635 |
| 40% | 40.0% | 2,333,278 | 164 | 14,215 |
| 30% | 30.0% | 1,749,588 | 150 | 11,684 |
| 20% | 20.0% | 1,168,652 | 129 | 9,049 |
| 10% | 10.0% | 582,648 | 114 | 5,111 |
| Active Idle | 0 | 78.7 | 0 | |
| ∑ssj_ops / ∑power = | 17,349 | |||
| Set Identifier: | SUT |
| Set Description: | System Under Test |
| # of Identical Nodes: | 1 |
| Comment: | SUT |
| Hardware | |
|---|---|
| Hardware Vendor: | Hewlett Packard Enterprise |
| Model: | ProLiant DL325 Gen10 |
| Form Factor: | 1U |
| CPU Name: | AMD EPYC 7702P 2.00 GHz |
| CPU Characteristics: | 64-Core, 2.00 GHz, 256MB L3 Cache |
| CPU Frequency (MHz): | 2000 |
| CPU(s) Enabled: | 64 cores, 1 chip, 64 cores/chip |
| Hardware Threads: | 128 (2 / core) |
| CPU(s) Orderable: | 1 chip |
| Primary Cache: | 32 KB I + 32 KB D on chip per core |
| Secondary Cache: | 512 KB I+D on chip per core |
| Tertiary Cache: | 256 MB I+D on chip per chip |
| Other Cache: | None |
| Memory Amount (GB): | 128 |
| # and size of DIMM: | 8 x 16384 MB |
| Memory Details: | 16GB 2Rx8 PC4-2933Y-R; slots 1, 3, 5, 7, 10, 12, 14 and 16 populated |
| Power Supply Quantity and Rating (W): | 1 x 800 |
| Power Supply Details: | HPE 800W Flex Slot Titanium Hot Plug Low Halogen Power Supply Kit (865438-B21) |
| Disk Drive: | 1 x HPE 480GB SATA 6G SSD (P05976-B21) |
| Disk Controller: | Embedded SATA Controller |
| # and type of Network Interface Cards (NICs) Installed: | 1 x HPE Ethernet 1Gb 4-port 331i Adapter |
| NICs Enabled in Firmware / OS / Connected: | 4/4/1 |
| Network Speed (Mbit): | 1000 |
| Keyboard: | None |
| Mouse: | None |
| Monitor: | None |
| Optical Drives: | No |
| Other Hardware: | None |
| Software | |
|---|---|
| Power Management: | Enabled (see SUT Notes) |
| Operating System (OS): | SUSE Linux Enterprise Server 12 SP4 |
| OS Version: | 4.12.14-94.41-default |
| Filesystem: | xfs |
| JVM Vendor: | Oracle Corporation |
| JVM Version: | Oracle Java HotSpot(TM) 64-Bit Server VM (build 24.80-b11, mixed mode), version 1.7.0_80 |
| JVM Command-line Options: | -server -Xmx7680m -Xms7680m -Xmn6000m -XX:SurvivorRatio=15 -XX:InlineSmallCode=9000 -XX:FreqInlineSize=5000 -XX:+UseLargePages -XX:+UseBiasedLocking -XX:ParallelGCThreads=8 -XX:+UseParallelOldGC -XX:+OptimizeStringConcat -XX:AllocatePrefetchLines=7 -XX:MaxInlineSize=80 -XX:LoopUnrollLimit=30 -XX:AllocatePrefetchDistance=192 -XX:InitialTenuringThreshold=10 |
| JVM Affinity: | numactl --cpunodebind=[0-15] --localalloc |
| JVM Instances: | 16 |
| JVM Initial Heap (MB): | 7680 |
| JVM Maximum Heap (MB): | 7680 |
| JVM Address Bits: | 64 |
| Boot Firmware Version: | A41 v2.00 (07/15/2019) |
| Management Firmware Version: | 1.43 May 23 2019 |
| Workload Version: | SSJ 1.2.10 |
| Director Location: | Controller |
| Other Software: | None |
| Hardware | |
|---|---|
| Hardware Vendor: | Hewlett-Packard Company |
| Model: | ProLiant DL360p Gen8 |
| CPU Description: | Intel Xeon E5-2660 v3 |
| Memory amount (GB): | 128 |
| Software | |
|---|---|
| Operating System (OS): | Windows Server 2012 R2 Standard |
| JVM Vendor: | Oracle Corporation |
| JVM Version: | 1.8.0_131-b11 |
| CCS Version: | 1.2.6 |
| Power Analyzer pwr1 | |
|---|---|
| Hardware Vendor: | Yokogawa |
| Model: | WT210 |
| Serial Number: | 91GB47167 |
| Connectivity: | GPIB vi NI GPIB-USB-HS |
| Input Connection: | Default |
| Metrology Institute: | NIST |
| Accredited by: | TRANSCAT |
| Calibration Label: | 5-E553M-40-1 |
| Date of Calibration: | 21-May-2019 |
| PTDaemon Host System: | same as CCS |
| PTDaemon Host OS: | same as CCS |
| PTDaemon Version: | 1.9.0-ee285d08-20190201 |
| Setup Description: | SUT Power Supply 1 |
| Temperature Sensor temp1 | |
|---|---|
| Hardware Vendor: | Digi International Inc. |
| Model: | Watchport/H |
| Driver Version: | 5.70.105.0 |
| Connectivity: | USB |
| PTDaemon Host System: | same as CCS |
| PTDaemon Host OS: | same as CCS |
| Setup Description: | 5 mm in front of SUT main intake |
| Target Load | Average Active Power (W) | Minimum Ambient Temperature (°C) |
|---|---|---|
| 100% | 230 | 22.9 |
| 90% | 218 | 23.0 |
| 80% | 207 | 23.1 |
| 70% | 195 | 23.1 |
| 60% | 185 | 23.1 |
| 50% | 175 | 23.1 |
| 40% | 164 | 23.0 |
| 30% | 150 | 23.0 |
| 20% | 129 | 23.0 |
| 10% | 114 | 22.9 |
| Active Idle | 78.7 | 22.9 |
| Line Standard | Minimum Temperature (°C) | Elevation (m) |
|---|---|---|
| 208V / 60 Hz / 1 phase / 2 wires | 22.9 | 132 |
| Target Load | Actual Load | ssj_ops | |
|---|---|---|---|
| Target | Actual | ||
| Calibration 1 | 5,831,488 | ||
| Calibration 2 | 5,827,818 | ||
| Calibration 3 | 5,830,440 | ||
| ssj_ops@calibrated=5,829,129 | |||
| 100% | 99.5% | 5,829,129 | 5,801,076 |
| 90% | 89.9% | 5,246,216 | 5,242,259 |
| 80% | 80.0% | 4,663,303 | 4,664,078 |
| 70% | 70.0% | 4,080,390 | 4,080,521 |
| 60% | 60.0% | 3,497,477 | 3,499,172 |
| 50% | 50.1% | 2,914,564 | 2,917,502 |
| 40% | 40.0% | 2,331,652 | 2,333,278 |
| 30% | 30.0% | 1,748,739 | 1,749,588 |
| 20% | 20.0% | 1,165,826 | 1,168,652 |
| 10% | 10.0% | 582,913 | 582,648 |
| Active Idle | 0 | 0 | |