|
Fujitsu PRIMERGY TX1320 M4, Intel Xeon E-2288G, |
SPECspeed®2017_fp_base = 35.9 |
|
SPECspeed®2017_fp_peak = Not Run SPECspeed®2017_fp_energy_peak = Not Run |
| CPU2017 License: | 19 | Test Date: | Oct-2019 |
|---|---|---|---|
| Test Sponsor: | Fujitsu | Hardware Availability: | Oct-2019 |
| Tested by: | Fujitsu | Software Availability: | May-2019 |
Benchmark result graphs are available in the PDF report.
| Hardware | |
|---|---|
| CPU Name: | Intel Xeon E-2288G |
| Max MHz: | 5000 |
| Nominal: | 3700 |
| Enabled: | 8 cores, 1 chip |
| Orderable: | 1 chip |
| Cache L1: | 32 KB I + 32 KB D on chip per core |
| L2: | 256 KB I+D on chip per core |
| L3: | 16 MB I+D on chip per chip |
| Other: | None |
| Memory: | 64 GB (4 x 16 GB 2Rx8 PC4-2666V-E) |
| Storage: | 1 x SATA M.2 SSD, 480 GB |
| Other: | None |
| Software | |
|---|---|
| OS: | Red Hat Enterprise Linux Server release 7.6 (Maipo) 3.10.0-957.el7.x86_64 |
| Compiler: | C/C++: Version 19.0.4.227 of Intel C/C++ Compiler for Linux; Fortran: Version 19.0.4.227 of Intel Fortran Compiler for Linux |
| Parallel: | Yes |
| Firmware: | Fujitsu BIOS Version V5.0.0.13 R1.12.0 for D3673-A1x. Released Sep-2019 |
| File System: | xfs |
| System State: | Run level 3 (multi-user) |
| Base Pointers: | 64-bit |
| Peak Pointers: | Not Applicable |
| Other: | None |
| Power Management: | Enabled |
| Power | |
|---|---|
| Max. Power (W): | 180.06 |
| Idle Power (W): | 19.76 |
| Min. Temperature (C): | 20.56 |
| Elevation (m): | 11 |
| Line Standard: | 200 V / 50 Hz / 1 phase / 2 wires |
| Provisioning: | Line-powered |
| Power Settings | |
|---|---|
| Management FW: | Version 1.60h for D3673-A1x of Fujitsu BMC Firmware |
| Memory Mode: | Normal |
| Power-Relevant Hardware | |
|---|---|
| Power Supply: | 1 x 450 W (non-redundant) |
| Details: | Standard power supply part of base unit S26361-K1639-V101 |
| Backplane: | 4 x 2.5inch HDD back plane |
| Other Storage: | Embedded SATA Controller |
| Storage Model #s: | S26361-F5706 |
| NICs Installed: | 2 x Intel I210 Springville @ 1 Gb |
| NICs Enabled (FW/OS): | 2 / 2 |
| NICs Connected/Speed: | 1 @ 1 Gb |
| Other HW Model #s: | None |
| Power Analyzer | |
|---|---|
| Power Analyzer: | 10.26.120.153:8888 |
| Hardware Vendor: | Hioki |
| Model: | Hioki PW3336:1-Channel |
| Serial Number: | 170134584 |
| Input Connection: | USB via USB-Serial CH340 |
| Metrology Institute: | NICT |
| Calibration By: | HIOKI E.E. CORPORATION |
| Calibration Label: | H06400087-1901T |
| Calibration Date: | 1-Jan-2019 |
| PTDaemon™ Version: | 1.9.1 (a2d19f26; 2019-07-17) |
| Setup Description: | Connected to PSU 1 |
| Current Ranges Used: | 1A |
| Voltage Range Used: | 300V |
| Temperature Meter | |
|---|---|
| Temperature Meter: | 10.26.120.153:8889 |
| Hardware Vendor: | Digi International Inc. |
| Model: | DigiWATCHPORT_H |
| Serial Number: | W 640 45112 |
| Input Connection: | USB |
| PTDaemon Version: | 1.9.1 (a2d19f26; 2019-07-17) |
| Setup Description: | 5 mm in front of SUT main air intake |
| Benchmark | Threads | Seconds | Ratio | Energy (kJ) |
Energy Ratio |
Average Power |
Maximum Power |
Seconds | Ratio | Energy (kJ) |
Energy Ratio |
Average Power |
Maximum Power |
Seconds | Ratio | Energy (kJ) |
Energy Ratio |
Average Power |
Maximum Power |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| SPECspeed®2017_fp_base | 35.9 | ||||||||||||||||||
| SPECspeed®2017_fp_energy_base | 312 | ||||||||||||||||||
| Results appear in the order in which they were run. Bold underlined text indicates a median measurement. | |||||||||||||||||||
| 603.bwaves_s | 8 | 761 | 77.6 | 94.1 | 684 | 124 | 131 | 761 | 77.6 | 95.0 | 678 | 125 | 132 | 761 | 77.6 | 95.1 | 677 | 125 | 132 |
| 607.cactuBSSN_s | 8 | 264 | 63.1 | 38.2 | 478 | 145 | 175 | 265 | 63.0 | 38.3 | 476 | 145 | 175 | 265 | 63.0 | 38.3 | 476 | 145 | 175 |
| 619.lbm_s | 8 | 330 | 15.9 | 45.9 | 130 | 139 | 141 | 330 | 15.9 | 46.1 | 129 | 140 | 141 | 330 | 15.9 | 46.0 | 129 | 139 | 141 |
| 621.wrf_s | 8 | 295 | 44.8 | 34.2 | 422 | 116 | 118 | 297 | 44.5 | 34.4 | 419 | 116 | 118 | 297 | 44.5 | 34.5 | 419 | 116 | 118 |
| 627.cam4_s | 8 | 288 | 30.8 | 37.0 | 260 | 129 | 136 | 288 | 30.7 | 37.1 | 260 | 129 | 136 | 289 | 30.7 | 37.2 | 259 | 129 | 138 |
| 628.pop2_s | 8 | 314 | 37.8 | 39.3 | 332 | 125 | 132 | 315 | 37.7 | 39.3 | 332 | 125 | 126 | 315 | 37.7 | 39.3 | 332 | 125 | 126 |
| 638.imagick_s | 8 | 370 | 39.0 | 49.5 | 318 | 134 | 179 | 372 | 38.8 | 49.8 | 316 | 134 | 179 | 374 | 38.6 | 49.8 | 316 | 133 | 180 |
| 644.nab_s | 8 | 229 | 76.5 | 31.5 | 603 | 138 | 177 | 229 | 76.4 | 31.5 | 603 | 138 | 177 | 228 | 76.5 | 31.6 | 601 | 139 | 177 |
| 649.fotonik3d_s | 8 | 534 | 17.1 | 58.0 | 176 | 109 | 115 | 533 | 17.1 | 57.7 | 177 | 108 | 115 | 536 | 17.0 | 58.0 | 177 | 108 | 116 |
| 654.roms_s | 8 | 901 | 17.5 | 103 | 170 | 115 | 126 | 901 | 17.5 | 103 | 170 | 115 | 127 | 903 | 17.4 | 104 | 170 | 115 | 126 |
Stack size set to unlimited using "ulimit -s unlimited"
Environment variables set by runcpu before the start of the run: KMP_AFFINITY = "granularity=fine,compact" LD_LIBRARY_PATH = "/home/Benchmark/speccpu2017-1.1.0/lib/intel64" OMP_STACKSIZE = "192M"
Environment variables set by runcpu before the start of the run: KMP_AFFINITY = "granularity=fine,compact" LD_LIBRARY_PATH = "/home/Benchmark/speccpu2017-2/ic19u5-lib/intel64" OMP_STACKSIZE = "192M" echo 100000000 > sched_min_granularity_ns echo 150000000 > sched_wakeup_granularity_ns echo 240000000 > sched_latency_ns Binaries compiled on a system with 1x Intel Core i9-799X CPU + 32GB RAM memory using Redhat Enterprise Linux 7.5 Transparent Huge Pages enabled by default Prior to runcpu invocation Filesystem page cache synced and cleared with: sync; echo 3> /proc/sys/vm/drop_caches NA: The test sponsor attests, as of date of publication, that CVE-2017-5754 (Meltdown) is mitigated in the system as tested and documented. Yes: The test sponsor attests, as of date of publication, that CVE-2017-5753 (Spectre variant 1) is mitigated in the system as tested and documented. Yes: The test sponsor attests, as of date of publication, that CVE-2017-5715 (Spectre variant 2) is mitigated in the system as tested and documented.
BIOS configuration:
Energy Efficient Turbo = Disabled
Fan Control = Full
Hyper-Threading = Disabled
SW Guard Extension(SGX) = Enabled
Sysinfo program /home/Benchmark/speccpu2017-1.1.0/bin/sysinfo
Rev: r6365 of 2019-08-21 295195f888a3d7edb1e6e46a485a0011
running on localhost.localdomain Mon Oct 14 18:19:29 2019
SUT (System Under Test) info as seen by some common utilities.
For more information on this section, see
https://www.spec.org/cpu2017/Docs/config.html#sysinfo
From /proc/cpuinfo
model name : Intel(R) Xeon(R) E-2288G CPU @ 3.70GHz
1 "physical id"s (chips)
8 "processors"
cores, siblings (Caution: counting these is hw and system dependent. The following
excerpts from /proc/cpuinfo might not be reliable. Use with caution.)
cpu cores : 8
siblings : 8
physical 0: cores 0 1 2 3 4 5 6 7
From lscpu:
Architecture: x86_64
CPU op-mode(s): 32-bit, 64-bit
Byte Order: Little Endian
CPU(s): 8
On-line CPU(s) list: 0-7
Thread(s) per core: 1
Core(s) per socket: 8
Socket(s): 1
NUMA node(s): 1
Vendor ID: GenuineIntel
CPU family: 6
Model: 158
Model name: Intel(R) Xeon(R) E-2288G CPU @ 3.70GHz
Stepping: 13
CPU MHz: 4562.896
CPU max MHz: 5000.0000
CPU min MHz: 800.0000
BogoMIPS: 7392.00
Virtualization: VT-x
L1d cache: 32K
L1i cache: 32K
L2 cache: 256K
L3 cache: 16384K
NUMA node0 CPU(s): 0-7
Flags: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov
pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx pdpe1gb rdtscp
lm constant_tsc art arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc
aperfmperf eagerfpu pni pclmulqdq dtes64 monitor ds_cpl vmx smx est tm2 ssse3 sdbg
fma cx16 xtpr pdcm pcid sse4_1 sse4_2 x2apic movbe popcnt tsc_deadline_timer aes
xsave avx f16c rdrand lahf_lm abm 3dnowprefetch epb intel_pt ssbd ibrs ibpb stibp
ibrs_enhanced tpr_shadow vnmi flexpriority ept vpid fsgsbase tsc_adjust bmi1 hle
avx2 smep bmi2 erms invpcid rtm mpx rdseed adx smap clflushopt xsaveopt xsavec
xgetbv1 dtherm ida arat pln pts hwp hwp_notify hwp_act_window hwp_epp spec_ctrl
intel_stibp flush_l1d arch_capabilities
/proc/cpuinfo cache data
cache size : 16384 KB
From numactl --hardware WARNING: a numactl 'node' might or might not correspond to a
physical chip.
From /proc/meminfo
MemTotal: 65596036 kB
HugePages_Total: 0
Hugepagesize: 2048 kB
From /etc/*release* /etc/*version*
os-release:
NAME="Red Hat Enterprise Linux Server"
VERSION="7.6 (Maipo)"
ID="rhel"
ID_LIKE="fedora"
VARIANT="Server"
VARIANT_ID="server"
VERSION_ID="7.6"
PRETTY_NAME="Red Hat Enterprise Linux Server 7.6 (Maipo)"
redhat-release: Red Hat Enterprise Linux Server release 7.6 (Maipo)
system-release: Red Hat Enterprise Linux Server release 7.6 (Maipo)
system-release-cpe: cpe:/o:redhat:enterprise_linux:7.6:ga:server
uname -a:
Linux localhost.localdomain 3.10.0-957.el7.x86_64 #1 SMP Thu Oct 4 20:48:51 UTC 2018
x86_64 x86_64 x86_64 GNU/Linux
Kernel self-reported vulnerability status:
CVE-2018-3620 (L1 Terminal Fault): Not affected
Microarchitectural Data Sampling: No status reported
CVE-2017-5754 (Meltdown): Not affected
CVE-2018-3639 (Speculative Store Bypass): Mitigation: Speculative Store Bypass disabled
via prctl and seccomp
CVE-2017-5753 (Spectre variant 1): Mitigation: Load fences, __user pointer
sanitization
CVE-2017-5715 (Spectre variant 2): Mitigation: Enhanced IBRS
run-level 3 Oct 14 18:18
SPEC is set to: /home/Benchmark/speccpu2017-1.1.0
Filesystem Type Size Used Avail Use% Mounted on
/dev/mapper/rhel-home xfs 392G 20G 373G 6% /home
From /sys/devices/virtual/dmi/id
BIOS: FUJITSU // American Megatrends Inc. V5.0.0.13 R1.12.0 for D3673-A1x
09/06/2019
Vendor: FUJITSU
Product: PRIMERGY TX1320 M4
Serial: YMJKXXXXXX
Additional information from dmidecode follows. WARNING: Use caution when you interpret
this section. The 'dmidecode' program reads system data which is "intended to allow
hardware to be accurately determined", but the intent may not be met, as there are
frequent changes to hardware, firmware, and the "DMTF SMBIOS" standard.
Memory:
4x SK Hynix HMA82GU7CJR8N-VK 16 GB 2 rank 2667
(End of data from sysinfo program)
PTDaemon to measure power and temperature was run on a PRIMERGY RX2530 M5 as a controller with 2x Intel Xeon Platinum 8280 CPU and 768 GB of memory using Windows Server 2012 R2. Power management in the BIOS was default except for any settings mentioned in BIOS Configuration. No power management settings were set in the management firmware. The optional optical drive was not installed. The run was started and observed through the management firmware.
============================================================================== C | 619.lbm_s(base) 638.imagick_s(base) 644.nab_s(base) ------------------------------------------------------------------------------ Intel(R) C Intel(R) 64 Compiler for applications running on Intel(R) 64, Version 19.0.4.227 Build 20190416 Copyright (C) 1985-2019 Intel Corporation. All rights reserved. ------------------------------------------------------------------------------ ============================================================================== C++, C, Fortran | 607.cactuBSSN_s(base) ------------------------------------------------------------------------------ Intel(R) C++ Intel(R) 64 Compiler for applications running on Intel(R) 64, Version 19.0.4.227 Build 20190416 Copyright (C) 1985-2019 Intel Corporation. All rights reserved. Intel(R) C Intel(R) 64 Compiler for applications running on Intel(R) 64, Version 19.0.4.227 Build 20190416 Copyright (C) 1985-2019 Intel Corporation. All rights reserved. Intel(R) Fortran Intel(R) 64 Compiler for applications running on Intel(R) 64, Version 19.0.4.227 Build 20190416 Copyright (C) 1985-2019 Intel Corporation. All rights reserved. ------------------------------------------------------------------------------ ============================================================================== Fortran | 603.bwaves_s(base) 649.fotonik3d_s(base) 654.roms_s(base) ------------------------------------------------------------------------------ Intel(R) Fortran Intel(R) 64 Compiler for applications running on Intel(R) 64, Version 19.0.4.227 Build 20190416 Copyright (C) 1985-2019 Intel Corporation. All rights reserved. ------------------------------------------------------------------------------ ============================================================================== Fortran, C | 621.wrf_s(base) 627.cam4_s(base) 628.pop2_s(base) ------------------------------------------------------------------------------ Intel(R) Fortran Intel(R) 64 Compiler for applications running on Intel(R) 64, Version 19.0.4.227 Build 20190416 Copyright (C) 1985-2019 Intel Corporation. All rights reserved. Intel(R) C Intel(R) 64 Compiler for applications running on Intel(R) 64, Version 19.0.4.227 Build 20190416 Copyright (C) 1985-2019 Intel Corporation. All rights reserved. ------------------------------------------------------------------------------
| icc -m64 -std=c11 |
| ifort -m64 |
| ifort -m64 icc -m64 -std=c11 |
| icpc -m64 icc -m64 -std=c11 ifort -m64 |
| 603.bwaves_s: | -DSPEC_LP64 |
| 607.cactuBSSN_s: | -DSPEC_LP64 |
| 619.lbm_s: | -DSPEC_LP64 |
| 621.wrf_s: | -DSPEC_LP64 -DSPEC_CASE_FLAG -convert big_endian |
| 627.cam4_s: | -DSPEC_LP64 -DSPEC_CASE_FLAG |
| 628.pop2_s: | -DSPEC_LP64 -DSPEC_CASE_FLAG -convert big_endian -assume byterecl |
| 638.imagick_s: | -DSPEC_LP64 |
| 644.nab_s: | -DSPEC_LP64 |
| 649.fotonik3d_s: | -DSPEC_LP64 |
| 654.roms_s: | -DSPEC_LP64 |
| -xCORE-AVX2 -ipo -O3 -no-prec-div -qopt-prefetch -ffinite-math-only -qopt-mem-layout-trans=4 -qopenmp -DSPEC_OPENMP |
| -DSPEC_OPENMP -xCORE-AVX2 -ipo -O3 -no-prec-div -qopt-prefetch -ffinite-math-only -qopt-mem-layout-trans=4 -qopenmp -nostandard-realloc-lhs |
| -xCORE-AVX2 -ipo -O3 -no-prec-div -qopt-prefetch -ffinite-math-only -qopt-mem-layout-trans=4 -qopenmp -DSPEC_OPENMP -nostandard-realloc-lhs |
| -xCORE-AVX2 -ipo -O3 -no-prec-div -qopt-prefetch -ffinite-math-only -qopt-mem-layout-trans=4 -qopenmp -DSPEC_OPENMP -nostandard-realloc-lhs |