SPEC CPU®2017 Floating Point Rate Result

Copyright 2017-2020 Standard Performance Evaluation Corporation

Hewlett Packard Enterprise (Test Sponsor: HPE)

ProLiant DL385 Gen10 Plus
(2.30 GHz, AMD EPYC 7352)

SPECrate®2017_fp_base = 32800

SPECrate®2017_fp_peak = Not Run

CPU2017 License: 3 Test Date: May-2020
Test Sponsor: HPE Hardware Availability: Apr-2020
Tested by: HPE Software Availability: Aug-2019

Benchmark result graphs are available in the PDF report.

Hardware
CPU Name: AMD EPYC 7352
  Max MHz: 3200
  Nominal: 2300
Enabled: 48 cores, 2 chips, 2 threads/core
Orderable: 1,2 chips
Cache L1: 32 KB I + 32 KB D on chip per core
  L2: 512 KB I+D on chip per core
  L3: 128 MB I+D on chip per chip,
16 MB shared / 3 cores
  Other: None
Memory: 1 TB (16 x 64 GB 2Rx4 PC4-3200AA-R)
Storage: 1 x 960 GB SATA SSD, RAID 0
Other: None
Software
OS: SUSE Linux Enterprise Server 15 (x86_64) SP1
Kernel 4.12.14-195-default
Compiler: C/C++/Fortran: Version 2.0.0 of AOCC
Parallel: No
Firmware: HPE BIOS Version A42 04/09/2020 released Apr-2020
File System: btrfs
System State: Run level 3 (multi-user)
Base Pointers: 64-bit
Peak Pointers: Not Applicable
Other: jemalloc: jemalloc memory allocator library v5.2.0
Power Management: BIOS set to prefer performance at the cost of additional power usage

Results Table

Benchmark Base Peak
Copies Seconds Ratio Seconds Ratio Seconds Ratio Copies Seconds Ratio Seconds Ratio Seconds Ratio
SPECrate®2017_fp_base 32800
SPECrate®2017_fp_peak Not Run
Results appear in the order in which they were run. Bold underlined text indicates a median measurement.
503.bwaves_r 96 1672 576 1671 576 1667 578
507.cactuBSSN_r 96 244 499 239 508 239 509
508.namd_r 96 348 262 349 261 348 262
510.parest_r 96 1242 202 1236 203 1239 203
511.povray_r 96 581 386 578 388 579 387
519.lbm_r 96 684 148 684 148 681 148
521.wrf_r 96 610 353 608 354 607 354
526.blender_r 96 392 373 392 373 392 373
527.cam4_r 96 502 335 502 334 501 335
538.imagick_r 96 233 1020 233 1020 233 1030
544.nab_r 96 344 470 344 470 343 471
549.fotonik3d_r 96 1831 204 1824 205 1830 204
554.roms_r 96 1146 133 1148 133 1143 133

Compiler Notes

The AMD64 AOCC Compiler Suite is available at
http://developer.amd.com/amd-aocc/

Submit Notes

The config file option 'submit' was used.
'numactl' was used to bind copies to the cores.
See the configuration file for details.

Operating System Notes

'ulimit -s unlimited' was used to set environment stack size
'ulimit -l 2097152' was used to set environment locked pages in memory limit

runcpu command invoked through numactl i.e.:
numactl --interleave=all runcpu <etc>

Set dirty_ratio=8 to limit dirty cache to 8% of memory
Set swappiness=1 to swap only if necessary
Set zone_reclaim_mode=1 to free local node memory and avoid remote memory
sync then drop_caches=3 to reset caches before invoking runcpu

dirty_ratio, swappiness, zone_reclaim_mode and drop_caches were
all set using privileged echo (e.g. echo 1 > /proc/sys/vm/swappiness).

Transparent huge pages set to 'always' for this run (OS default)

Environment Variables Notes

Environment variables set by runcpu before the start of the run:
LD_LIBRARY_PATH =
     "/home/cpu2017/amd_rate_aocc200_rome_C_lib/64;/home/cpu2017/amd_rate_aoc
     c200_rome_C_lib/32:"
MALLOC_CONF = "retain:true"

General Notes

Binaries were compiled on a system with 2x AMD EPYC 7601 CPU + 512GB Memory using Fedora 26

NA: The test sponsor attests, as of date of publication, that CVE-2017-5754 (Meltdown)
is mitigated in the system as tested and documented.
Yes: The test sponsor attests, as of date of publication, that CVE-2017-5753 (Spectre variant 1)
is mitigated in the system as tested and documented.
Yes: The test sponsor attests, as of date of publication, that CVE-2017-5715 (Spectre variant 2)
is mitigated in the system as tested and documented.


jemalloc: configured and built with GCC v9.1.0 in Ubuntu 19.04 with -O3 -znver2 -flto
jemalloc 5.2.0 is available here:
https://github.com/jemalloc/jemalloc/releases/download/5.2.0/jemalloc-5.2.0.tar.bz2

Platform Notes

BIOS Configuration
 Thermal Configuration set to Maximum Cooling
 Determinism Control set to Manual
 Performance Determinism set to Power Deterministic
 Minimum Processor Idle Power Core C-State set to C6 State
 Memory Patrol Scrubbing set to Disabled
 Workload Profile set to General Throughput Compute
 NUMA memory domains per socket set to Four memory domains per socket
 C-State Efficiency set to Enabled

 Sysinfo program /home/cpu2017/bin/sysinfo
 Rev: r6365 of 2019-08-21 295195f888a3d7edb1e6e46a485a0011
 running on linux-ocbc Thu Feb 14 09:22:15 2019

 SUT (System Under Test) info as seen by some common utilities.
 For more information on this section, see
    https://www.spec.org/cpu2017/Docs/config.html#sysinfo

 From /proc/cpuinfo
    model name : AMD EPYC 7352 24-Core Processor
       2  "physical id"s (chips)
       96 "processors"
    cores, siblings (Caution: counting these is hw and system dependent. The following
    excerpts from /proc/cpuinfo might not be reliable.  Use with caution.)
       cpu cores : 24
       siblings  : 48
       physical 0: cores 0 1 2 4 5 6 8 9 10 12 13 14 16 17 18 20 21 22 24 25 26 28 29 30
       physical 1: cores 0 1 2 4 5 6 8 9 10 12 13 14 16 17 18 20 21 22 24 25 26 28 29 30

 From lscpu:
      Architecture:        x86_64
      CPU op-mode(s):      32-bit, 64-bit
      Byte Order:          Little Endian
      Address sizes:       48 bits physical, 48 bits virtual
      CPU(s):              96
      On-line CPU(s) list: 0-95
      Thread(s) per core:  2
      Core(s) per socket:  24
      Socket(s):           2
      NUMA node(s):        8
      Vendor ID:           AuthenticAMD
      CPU family:          23
      Model:               49
      Model name:          AMD EPYC 7352 24-Core Processor
      Stepping:            0
      CPU MHz:             2295.453
      BogoMIPS:            4590.90
      Virtualization:      AMD-V
      L1d cache:           32K
      L1i cache:           32K
      L2 cache:            512K
      L3 cache:            16384K
      NUMA node0 CPU(s):   0-5,48-53
      NUMA node1 CPU(s):   6-11,54-59
      NUMA node2 CPU(s):   12-17,60-65
      NUMA node3 CPU(s):   18-23,66-71
      NUMA node4 CPU(s):   24-29,72-77
      NUMA node5 CPU(s):   30-35,78-83
      NUMA node6 CPU(s):   36-41,84-89
      NUMA node7 CPU(s):   42-47,90-95
      Flags:               fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov
      pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt pdpe1gb rdtscp lm
      constant_tsc rep_good nopl xtopology nonstop_tsc cpuid extd_apicid aperfmperf pni
      pclmulqdq monitor ssse3 fma cx16 sse4_1 sse4_2 movbe popcnt aes xsave avx f16c
      rdrand lahf_lm cmp_legacy svm extapic cr8_legacy abm sse4a misalignsse 3dnowprefetch
      osvw ibs skinit wdt tce topoext perfctr_core perfctr_nb bpext perfctr_l2 mwaitx cpb
      cat_l3 cdp_l3 hw_pstate ssbd ibrs ibpb stibp vmmcall fsgsbase bmi1 avx2 smep bmi2
      cqm rdt_a rdseed adx smap clflushopt clwb sha_ni xsaveopt xsavec xgetbv1 xsaves
      cqm_llc cqm_occup_llc cqm_mbm_total cqm_mbm_local clzero irperf xsaveerptr arat npt
      lbrv svm_lock nrip_save tsc_scale vmcb_clean flushbyasid decodeassists pausefilter
      pfthreshold avic v_vmsave_vmload vgif umip rdpid overflow_recov succor smca

 /proc/cpuinfo cache data
    cache size : 512 KB

 From numactl --hardware  WARNING: a numactl 'node' might or might not correspond to a
 physical chip.
   available: 8 nodes (0-7)
   node 0 cpus: 0 1 2 3 4 5 48 49 50 51 52 53
   node 0 size: 128710 MB
   node 0 free: 128456 MB
   node 1 cpus: 6 7 8 9 10 11 54 55 56 57 58 59
   node 1 size: 129021 MB
   node 1 free: 128801 MB
   node 2 cpus: 12 13 14 15 16 17 60 61 62 63 64 65
   node 2 size: 129021 MB
   node 2 free: 128839 MB
   node 3 cpus: 18 19 20 21 22 23 66 67 68 69 70 71
   node 3 size: 129009 MB
   node 3 free: 128811 MB
   node 4 cpus: 24 25 26 27 28 29 72 73 74 75 76 77
   node 4 size: 129021 MB
   node 4 free: 128828 MB
   node 5 cpus: 30 31 32 33 34 35 78 79 80 81 82 83
   node 5 size: 128991 MB
   node 5 free: 128810 MB
   node 6 cpus: 36 37 38 39 40 41 84 85 86 87 88 89
   node 6 size: 129021 MB
   node 6 free: 128825 MB
   node 7 cpus: 42 43 44 45 46 47 90 91 92 93 94 95
   node 7 size: 129019 MB
   node 7 free: 128744 MB
   node distances:
   node   0   1   2   3   4   5   6   7
     0:  10  12  12  12  32  32  32  32
     1:  12  10  12  12  32  32  32  32
     2:  12  12  10  12  32  32  32  32
     3:  12  12  12  10  32  32  32  32
     4:  32  32  32  32  10  12  12  12
     5:  32  32  32  32  12  10  12  12
     6:  32  32  32  32  12  12  10  12
     7:  32  32  32  32  12  12  12  10

 From /proc/meminfo
    MemTotal:       1056578764 kB
    HugePages_Total:       0
    Hugepagesize:       2048 kB

 From /etc/*release* /etc/*version*
    os-release:
       NAME="SLES"
       VERSION="15-SP1"
       VERSION_ID="15.1"
       PRETTY_NAME="SUSE Linux Enterprise Server 15 SP1"
       ID="sles"
       ID_LIKE="suse"
       ANSI_COLOR="0;32"
       CPE_NAME="cpe:/o:suse:sles:15:sp1"

 uname -a:
    Linux linux-ocbc 4.12.14-195-default #1 SMP Tue May 7 10:55:11 UTC 2019 (8fba516)
    x86_64 x86_64 x86_64 GNU/Linux

 Kernel self-reported vulnerability status:

 CVE-2018-3620 (L1 Terminal Fault):        Not affected
 Microarchitectural Data Sampling:         Not affected
 CVE-2017-5754 (Meltdown):                 Not affected
 CVE-2018-3639 (Speculative Store Bypass): Mitigation: Speculative Store Bypass disabled
                                           via prctl and seccomp
 CVE-2017-5753 (Spectre variant 1):        Mitigation: __user pointer sanitization
 CVE-2017-5715 (Spectre variant 2):        Mitigation: Full AMD retpoline, IBPB:
                                           conditional, IBRS_FW, STIBP: conditional, RSB
                                           filling

 run-level 3 Feb 14 09:21

 SPEC is set to: /home/cpu2017
    Filesystem     Type   Size  Used Avail Use% Mounted on
    /dev/sdb2      btrfs  853G  128G  725G  15% /home

 From /sys/devices/virtual/dmi/id
     BIOS:    HPE A42 04/09/2020
     Vendor:  HPE
     Product: ProLiant DL385 Gen10 Plus
     Product Family: ProLiant
     Serial:  CN79340HC3

 Additional information from dmidecode follows.  WARNING: Use caution when you interpret
 this section. The 'dmidecode' program reads system data which is "intended to allow
 hardware to be accurately determined", but the intent may not be met, as there are
 frequent changes to hardware, firmware, and the "DMTF SMBIOS" standard.
   Memory:
     16x Micron 36ASF8G72PZ-3G2B2 64 GB 2 rank 3200
     16x UNKNOWN NOT AVAILABLE

 (End of data from sysinfo program)

Compiler Version Notes

==============================================================================
C               | 519.lbm_r(base) 538.imagick_r(base) 544.nab_r(base)
------------------------------------------------------------------------------
AOCC.LLVM.2.0.0.B191.2019_07_19 clang version 8.0.0 (CLANG: Jenkins
  AOCC_2_0_0-Build#191) (based on LLVM AOCC.LLVM.2.0.0.B191.2019_07_19)
Target: x86_64-unknown-linux-gnu
Thread model: posix
InstalledDir: /sppo/dev/compilers/aocc-compiler-2.0.0/bin
------------------------------------------------------------------------------

==============================================================================
C++             | 508.namd_r(base) 510.parest_r(base)
------------------------------------------------------------------------------
AOCC.LLVM.2.0.0.B191.2019_07_19 clang version 8.0.0 (CLANG: Jenkins
  AOCC_2_0_0-Build#191) (based on LLVM AOCC.LLVM.2.0.0.B191.2019_07_19)
Target: x86_64-unknown-linux-gnu
Thread model: posix
InstalledDir: /sppo/dev/compilers/aocc-compiler-2.0.0/bin
------------------------------------------------------------------------------

==============================================================================
C++, C          | 511.povray_r(base) 526.blender_r(base)
------------------------------------------------------------------------------
AOCC.LLVM.2.0.0.B191.2019_07_19 clang version 8.0.0 (CLANG: Jenkins
  AOCC_2_0_0-Build#191) (based on LLVM AOCC.LLVM.2.0.0.B191.2019_07_19)
Target: x86_64-unknown-linux-gnu
Thread model: posix
InstalledDir: /sppo/dev/compilers/aocc-compiler-2.0.0/bin
AOCC.LLVM.2.0.0.B191.2019_07_19 clang version 8.0.0 (CLANG: Jenkins
  AOCC_2_0_0-Build#191) (based on LLVM AOCC.LLVM.2.0.0.B191.2019_07_19)
Target: x86_64-unknown-linux-gnu
Thread model: posix
InstalledDir: /sppo/dev/compilers/aocc-compiler-2.0.0/bin
------------------------------------------------------------------------------

==============================================================================
C++, C, Fortran | 507.cactuBSSN_r(base)
------------------------------------------------------------------------------
AOCC.LLVM.2.0.0.B191.2019_07_19 clang version 8.0.0 (CLANG: Jenkins
  AOCC_2_0_0-Build#191) (based on LLVM AOCC.LLVM.2.0.0.B191.2019_07_19)
Target: x86_64-unknown-linux-gnu
Thread model: posix
InstalledDir: /sppo/dev/compilers/aocc-compiler-2.0.0/bin
AOCC.LLVM.2.0.0.B191.2019_07_19 clang version 8.0.0 (CLANG: Jenkins
  AOCC_2_0_0-Build#191) (based on LLVM AOCC.LLVM.2.0.0.B191.2019_07_19)
Target: x86_64-unknown-linux-gnu
Thread model: posix
InstalledDir: /sppo/dev/compilers/aocc-compiler-2.0.0/bin
AOCC.LLVM.2.0.0.B191.2019_07_19 clang version 8.0.0 (CLANG: Jenkins
  AOCC_2_0_0-Build#191) (based on LLVM AOCC.LLVM.2.0.0.B191.2019_07_19)
Target: x86_64-unknown-linux-gnu
Thread model: posix
InstalledDir: /sppo/dev/compilers/aocc-compiler-2.0.0/bin
------------------------------------------------------------------------------

==============================================================================
Fortran         | 503.bwaves_r(base) 549.fotonik3d_r(base) 554.roms_r(base)
------------------------------------------------------------------------------
AOCC.LLVM.2.0.0.B191.2019_07_19 clang version 8.0.0 (CLANG: Jenkins
  AOCC_2_0_0-Build#191) (based on LLVM AOCC.LLVM.2.0.0.B191.2019_07_19)
Target: x86_64-unknown-linux-gnu
Thread model: posix
InstalledDir: /sppo/dev/compilers/aocc-compiler-2.0.0/bin
------------------------------------------------------------------------------

==============================================================================
Fortran, C      | 521.wrf_r(base) 527.cam4_r(base)
------------------------------------------------------------------------------
AOCC.LLVM.2.0.0.B191.2019_07_19 clang version 8.0.0 (CLANG: Jenkins
  AOCC_2_0_0-Build#191) (based on LLVM AOCC.LLVM.2.0.0.B191.2019_07_19)
Target: x86_64-unknown-linux-gnu
Thread model: posix
InstalledDir: /sppo/dev/compilers/aocc-compiler-2.0.0/bin
AOCC.LLVM.2.0.0.B191.2019_07_19 clang version 8.0.0 (CLANG: Jenkins
  AOCC_2_0_0-Build#191) (based on LLVM AOCC.LLVM.2.0.0.B191.2019_07_19)
Target: x86_64-unknown-linux-gnu
Thread model: posix
InstalledDir: /sppo/dev/compilers/aocc-compiler-2.0.0/bin
------------------------------------------------------------------------------

Base Compiler Invocation

C benchmarks:

 clang 

C++ benchmarks:

 clang++ 

Fortran benchmarks:

 flang 

Benchmarks using both Fortran and C:

 flang   clang 

Benchmarks using both C and C++:

 clang++   clang 

Benchmarks using Fortran, C, and C++:

 clang++   clang   flang 

Base Portability Flags

503.bwaves_r:  -DSPEC_LP64 
507.cactuBSSN_r:  -DSPEC_LP64 
508.namd_r:  -DSPEC_LP64 
510.parest_r:  -DSPEC_LP64 
511.povray_r:  -DSPEC_LP64 
519.lbm_r:  -DSPEC_LP64 
521.wrf_r:  -DSPEC_CASE_FLAG   -Mbyteswapio   -DSPEC_LP64 
526.blender_r:  -funsigned-char   -D__BOOL_DEFINED   -DSPEC_LP64 
527.cam4_r:  -DSPEC_CASE_FLAG   -DSPEC_LP64 
538.imagick_r:  -DSPEC_LP64 
544.nab_r:  -DSPEC_LP64 
549.fotonik3d_r:  -DSPEC_LP64 
554.roms_r:  -DSPEC_LP64 

Base Optimization Flags

C benchmarks:

 -flto   -Wl,-mllvm -Wl,-function-specialize   -Wl,-mllvm -Wl,-region-vectorize   -Wl,-mllvm -Wl,-vector-library=LIBMVEC   -Wl,-mllvm -Wl,-reduce-array-computations=3   -O3   -ffast-math   -march=znver2   -fstruct-layout=3   -mllvm -unroll-threshold=50   -fremap-arrays   -mllvm -function-specialize   -mllvm -enable-gvn-hoist   -mllvm -reduce-array-computations=3   -mllvm -global-vectorize-slp   -mllvm -vector-library=LIBMVEC   -mllvm -inline-threshold=1000   -flv-function-specialization   -z muldefs   -lmvec   -lamdlibm   -ljemalloc   -lflang 

C++ benchmarks:

 -std=c++98   -flto   -Wl,-mllvm -Wl,-function-specialize   -Wl,-mllvm -Wl,-region-vectorize   -Wl,-mllvm -Wl,-vector-library=LIBMVEC   -Wl,-mllvm -Wl,-reduce-array-computations=3   -Wl,-mllvm -Wl,-suppress-fmas   -O3   -ffast-math   -march=znver2   -mllvm -loop-unswitch-threshold=200000   -mllvm -vector-library=LIBMVEC   -mllvm -unroll-threshold=100   -flv-function-specialization   -mllvm -enable-partial-unswitch   -z muldefs   -lmvec   -lamdlibm   -ljemalloc   -lflang 

Fortran benchmarks:

 -flto   -Wl,-mllvm -Wl,-function-specialize   -Wl,-mllvm -Wl,-region-vectorize   -Wl,-mllvm -Wl,-vector-library=LIBMVEC   -Wl,-mllvm -Wl,-reduce-array-computations=3   -O3   -march=znver2   -funroll-loops   -Mrecursive   -mllvm -vector-library=LIBMVEC   -z muldefs   -Kieee   -fno-finite-math-only   -lmvec   -lamdlibm   -ljemalloc   -lflang 

Benchmarks using both Fortran and C:

 -flto   -Wl,-mllvm -Wl,-function-specialize   -Wl,-mllvm -Wl,-region-vectorize   -Wl,-mllvm -Wl,-vector-library=LIBMVEC   -Wl,-mllvm -Wl,-reduce-array-computations=3   -O3   -ffast-math   -march=znver2   -fstruct-layout=3   -mllvm -unroll-threshold=50   -fremap-arrays   -mllvm -function-specialize   -mllvm -enable-gvn-hoist   -mllvm -reduce-array-computations=3   -mllvm -global-vectorize-slp   -mllvm -vector-library=LIBMVEC   -mllvm -inline-threshold=1000   -flv-function-specialization   -funroll-loops   -Mrecursive   -z muldefs   -Kieee   -fno-finite-math-only   -lmvec   -lamdlibm   -ljemalloc   -lflang 

Benchmarks using both C and C++:

 -std=c++98   -flto   -Wl,-mllvm -Wl,-function-specialize   -Wl,-mllvm -Wl,-region-vectorize   -Wl,-mllvm -Wl,-vector-library=LIBMVEC   -Wl,-mllvm -Wl,-reduce-array-computations=3   -Wl,-mllvm -Wl,-suppress-fmas   -O3   -ffast-math   -march=znver2   -fstruct-layout=3   -mllvm -unroll-threshold=50   -fremap-arrays   -mllvm -function-specialize   -mllvm -enable-gvn-hoist   -mllvm -reduce-array-computations=3   -mllvm -global-vectorize-slp   -mllvm -vector-library=LIBMVEC   -mllvm -inline-threshold=1000   -flv-function-specialization   -mllvm -loop-unswitch-threshold=200000   -mllvm -unroll-threshold=100   -mllvm -enable-partial-unswitch   -z muldefs   -lmvec   -lamdlibm   -ljemalloc   -lflang 

Benchmarks using Fortran, C, and C++:

 -std=c++98   -flto   -Wl,-mllvm -Wl,-function-specialize   -Wl,-mllvm -Wl,-region-vectorize   -Wl,-mllvm -Wl,-vector-library=LIBMVEC   -Wl,-mllvm -Wl,-reduce-array-computations=3   -Wl,-mllvm -Wl,-suppress-fmas   -O3   -ffast-math   -march=znver2   -fstruct-layout=3   -mllvm -unroll-threshold=50   -fremap-arrays   -mllvm -function-specialize   -mllvm -enable-gvn-hoist   -mllvm -reduce-array-computations=3   -mllvm -global-vectorize-slp   -mllvm -vector-library=LIBMVEC   -mllvm -inline-threshold=1000   -flv-function-specialization   -mllvm -loop-unswitch-threshold=200000   -mllvm -unroll-threshold=100   -mllvm -enable-partial-unswitch   -funroll-loops   -Mrecursive   -z muldefs   -Kieee   -fno-finite-math-only   -lmvec   -lamdlibm   -ljemalloc   -lflang 

The flags files that were used to format this result can be browsed at
http://www.spec.org/cpu2017/flags/HPE-Platform-Flags-AMD-V1.2-EPYC-revH.2020-05-12.html,
http://www.spec.org/cpu2017/flags/aocc200-flags-C1-HPE.html.

You can also download the XML flags sources by saving the following links:
http://www.spec.org/cpu2017/flags/HPE-Platform-Flags-AMD-V1.2-EPYC-revH.2020-05-12.xml,
http://www.spec.org/cpu2017/flags/aocc200-flags-C1-HPE.xml.