SPEC Seal of Reviewal SPECjEnterprise®2010 Result
Copyright © 2009-2011 Standard Performance Evaluation Corporation
WebSphere Application Server V8 on IBM System x3650 and DB2 9.7 on IBM System HS22
2,341.12 SPECjEnterprise2010 EjOPS
Submitter:
IBM Corporation
SPEC license # 11 Test date:
Mar-2011
Software Products
WebSphere Application Server V8
IBM J9 VM (build 2.6, JRE 1.6.0 Linux x86-32)
IBM J9 VM (build 2.4, J2RE 1.6.0 IBM J9 2.4 Linux amd64-64)
IBM DB2 Universal JDBC Drivers (3.61.75)
DB2 9.7 Workgroup Server Edition Fix Pack 3a
Software Configurations
JEE Application Server
Emulator Software Config
Database Software Config
Driver Config
Hardware Systems
JEE AppServer HW
Database Server HW
Load Driver HW
Emulator HW

System Configuration Diagram

Benchmark
Modifications
Configuration
Bill of Materials
Other Info
General Notes
Full Disclosure Archive

SUT Configuration
JEE Server Nodes: 1   DB Server Nodes: 1
JEE Server CPUs: 8 cores, 2 chips   DB Server CPUs: 12 cores, 2 chips
JEE Instances: 2   DB Instances: 1
Other SUT Components:
   NETGEAR ProSafe GS748T 48-port 10/100/1000Mbps Gigabit Switch

Benchmark Settings
Dealer Injection Rate: 1,480   Ramp Up Time: 1,200 seconds
DB Load Injection Rate: 2,000   Steady State Time: 3,600 seconds
# of Dealer Agents: 14,800   Ramp Down Time: 300 seconds
# of Manufacturing Agents: 4,440  

Detailed Results
Dealer Transaction Mix Count Tx. Mix Failure Count
Purchase 1,338,244 25.03% 2
Manage 1,337,543 25.02% 0
Browse 2,670,571 49.95% 0
Total # Dealer Transactions 5,346,358
Manufacturing Transaction Mix Count Tx. Mix Failure Count
CreateVehicleEJB 1,542,377 50.05% 402
CreateVehicleWS 1,539,308 49.95% 444
Total # Manufacturing Transactions 3,081,685
Response Times Average Standard Deviation Maximum 90th% Reqd
Purchase 0.377 0.57 9.964 0.940 2.000
Manage 0.266 0.36 10.186 0.610 2.000
Browse 0.442 0.63 8.353 1.230 2.000
CreateVehicleEJB 0.518 0.62 8.280 1.150 5.000
CreateVehicleWS 0.360 0.68 14.305 0.650 5.000
Reproducibility Run (SPECjEnterprise2010 EjOPS) 2,343.46

WebSphere Application Server V8
Vendor: IBM Corporation Availability: Jun-2011
CTS Version: 5.0 Date Passed CTS: Apr-2011
OS Name: Novell SUSE Linux Enterprise Server 10 SP3
EJB Protocol: RMI/IIOP

IBM J9 VM (build 2.6, JRE 1.6.0 Linux x86-32)
Vendor: IBM Corporation Availability: Jun-2011
OS Name: Novell SUSE Linux Enterprise Server 10 SP3

IBM J9 VM (build 2.4, J2RE 1.6.0 IBM J9 2.4 Linux amd64-64)
Vendor: IBM Corporation Availability: Jun-2009
OS Name: Red Hat Enterprise Linux 5.2

IBM DB2 Universal JDBC Drivers (3.61.75)
Vendor: IBM Corporation Availability: Oct-2010
OS Name: Novell SUSE Linux Enterprise Server 10 SP3

DB2 9.7 Workgroup Server Edition Fix Pack 3a
Vendor: IBM Corporation Availability: Oct-2010
OS Name: Novell SUSE Linux Enterprise Server 10 SP3

JEE Application Server
JEE Product: WebSphere Application Server V8
JVM Product: IBM J9 VM (build 2.6, JRE 1.6.0 Linux x86-32)
JDBC Product: IBM DB2 Universal JDBC Drivers (3.61.75)
Hardware: JEE AppServer HW
# of Instances: 2
Interfaces:
Web Interface for the Order Domain
Web Services Interface for the Supplier Domain
EJB Interface for the Manufacturing Domain
Web Services Interface for the Manufacturing Domain
Notes / Tuning Information
JVM Parameters:
-Xms2560m -Xmx2560m -Xss128k -Xgcpolicy:gencon -Xnoloa -Xmo500m -Xmn2060m -Xtrace:none -Xlp
-Xgcthreads4 -Xdisableexplicitgc -Dcom.ibm.CORBA.FragmentSize=10000 -Djavax.xml.transform.TransformerFactory=org.apache.xalan.processor.TransformerFactoryImpl
-Djavax.xml.parsers.SAXParserFactory=org.apache.xerces.jaxp.SAXParserFactoryImpl
-Djavax.xml.parsers.DocumentBuilderFactory=org.apache.xerces.jaxp.DocumentBuilderFactoryImpl
-Djava.net.preferIPv4Stack=true -Dsun.net.inetaddr.ttl=0 -DdisableWSAddressCaching=true
Refer to files appservers/node.resources.xml, and appservers/server.xml
for all server configuration and resource configuration
information

Emulator Software Config
JEE Product: WebSphere Application Server V8
JVM Product: IBM J9 VM (build 2.6, JRE 1.6.0 Linux x86-32)
Hardware: Emulator HW
# of Instances: 2
Notes / Tuning Information
JVM Parameters:
-Xms2048m -Xmx2048m -Xss128k -Xgcpolicy:gencon -Xnoloa -Xmo512m -Xmn1536m -Xtrace:none -Xlp -DdisableWSAddressCaching=true
-Xgcthreads8 -Xdisableexplicitgc -Djavax.xml.transform.TransformerFactory=org.apache.xalan.processor.TransformerFactoryImpl
-Djavax.xml.parsers.SAXParserFactory=org.apache.xerces.jaxp.SAXParserFactoryImpl
-Djavax.xml.parsers.DocumentBuilderFactory=org.apache.xerces.jaxp.DocumentBuilderFactoryImpl
-Djava.net.preferIPv4Stack=true -Dsun.net.inetaddr.ttl=0
Refer to files emulator/server.xml
for all server configuration and resource configuration
information

Database Software Config
DB Product: DB2 9.7 Workgroup Server Edition Fix Pack 3a
Hardware: Database Server HW
# of Instances: 1
Character Set: UTF-8
Notes / Tuning Information
DB2_MINIMIZE_LISTPREFETCH=YES
DB2_RESOURCE_POLICY=/home/db2inst1/scripts/loggerpri.cfg
DB2_USE_ALTERNATE_PAGE_CLEANING=ON
DB2_KEEPTABLELOCK=CONNECTION
DB2_APM_PERFORMANCE=ON
MAX_COORDAGENTS 1080 automatic
DFT_MON_BUFPOOL on
DFT_MON_LOCK off
DFT_MON_SORT off
DFT_MON_STMT off
DFT_MON_TIMESTAMP off
DFT_MON_UOW off
DFT_MON_TABLE off
CPUSPEED -1
SVCENAME 60004
LOGBUFSZ 4096
LOGPRIMARY 52
SOFTMAX 1000
CHNGPGS_THRESH 99
LOGFILSIZ 65535
LOGRETAIN on
NEWLOGPATH /dev/speclogs/speclogLV
AUTO_MAINT off
AUTO_RUNSTATS off
AUTO_TBL_MAINT off
LOCKLIST 36000
MAXLOCKS 100
MINCOMMIT 1
MON_REQ_METRICS none
MON_ACT_METRICS none
MON_OBJ_METRICS none
IBMDEFAULTBP immediate size 4300000
O_ORDERLINE, O_ORDER, O_CUSTOMERINVENTORY, S_PURCH_ORDER, M_WORKORDER append on
M_WORKORDER, O_ITEMS, M_INVENTORY, S_SUPPLIER volatile

Driver Config
JVM Product: IBM J9 VM (build 2.4, J2RE 1.6.0 IBM J9 2.4 Linux amd64-64)
Hardware: Load Driver HW
# of Instances: 2
Notes / Tuning Information
-server -Xms2048M -Xmx2048M -Djava.net.preferIPv4Stack=true
-Dsun.net.inetaddr.ttl=0 -Dnetworkaddress.cache.ttl=0 -Dcom.ibm.websphere.naming.jndicache.cacheobject=none
-Dcom.ibm.websphere.naming.hostname.normalizer=...none... -DdisableWSAddressCaching=true

JEE AppServer HW (SUT hardware)
Hardware Vendor: IBM Corporation OS Vendor: Novell
Model Name: IBM System x3650 M2 OS Name: Novell SUSE Linux Enterprise Server 10 SP3
Processor: Intel Xeon X5570 (Intel Turbo Boost Technology up to 3.33GHz) Filesystem: Reiser
MHz: 2933 Disks: 4x73GB 15K SAS
# of CPUs: 8 cores, 2 chips, 4 cores/chip (8 HW threads/chip) Network Interface: (8) 1000BaseT Ethernet
Memory (MB): 24576 Other Hardware:
DIMM[0] Count: 6 DIMM[0] Size: 4096
L1 Cache: 32 KB I + 32 KB D on chip per core # of Systems: 1
L2 Cache: 256 KB I+D on chip per core H/W Available: Jun-2009
Other Cache: 8 MB I+D on chip per chip OS Available: May-2009
Notes / Tuning Information
fs.file-max = 1048576
kernel.sem = 250 32000 100 128
kernel.shmall = 4294967296
kernel.shmmax = 68719476736
net.core.netdev_max_backlog = 400000
net.core.optmem_max = 30000000
net.core.rmem_default = 30000000
net.core.wmem_default = 30000000
net.core.rmem_max = 30000000
net.core.wmem_max = 30000000
net.core.somaxconn = 300000
net.ipv4.conf.all.arp_announce = 2
net.ipv4.conf.all.arp_ignore = 1
net.ipv4.conf.default.rp_filter = 1
net.ipv4.conf.default.accept_source_route = 0
net.ipv4.ip_forward = 0
net.ipv4.ip_local_port_range = 1024 65000
net.ipv4.tcp_fin_timeout = 10
net.ipv4.tcp_max_syn_backlog = 30000
net.ipv4.tcp_max_tw_buckets = 2000000
net.ipv4.tcp_mem  = 30000000 30000000 30000000
net.ipv4.tcp_rmem = 30000000 30000000 30000000
net.ipv4.tcp_wmem = 30000000 30000000 30000000
net.ipv4.tcp_timestamps = 0
net.ipv4.tcp_sack = 0
vm.nr_hugepages = 6656
ulimit -n 1048576

Network Tuning:
  set txqueuelen 60000
  Stop irqbalance.
  Network interrupts bound to a core corresponding to the server instance.

Server instances were started using taskset, binding 1 instances per chip.

Database Server HW (SUT hardware)
Hardware Vendor: IBM Corporation OS Vendor: Novell
Model Name: IBM System x HS22 OS Name: Novell SUSE Linux Enterprise Server 10 SP3
Processor: Intel Xeon X5670 (Intel Turbo Boost Technology up to 3.33GHz) Filesystem: Reiser
MHz: 2933 Disks: 2x73GB 15K SAS
# of CPUs: 12 cores, 2 chips, 6 cores/chip (12 HW threads/chip) Network Interface: (3) 1000BaseT Ethernet
Memory (MB): 49152 Other Hardware: 1xDS3524 Disk Systems, 24x146.8GB 15K E-DDM Disks
DIMM[0] Count: 12 DIMM[0] Size: 4096
L1 Cache: 32 KB I + 32 KB D on chip per core # of Systems: 1
L2 Cache: 256 KB I+D on chip per core H/W Available: Mar-2010
Other Cache: 12 MB I+D on chip per chip OS Available: May-2009
Notes / Tuning Information
fs.file-max = 1048576
kernel.sem = 250 32000 100 128
kernel.shmall = 4294967296
kernel.shmmax = 68719476736
net.core.netdev_max_backlog = 400000
net.core.optmem_max = 30000000
net.core.rmem_default = 30000000
net.core.wmem_default = 30000000
net.core.rmem_max = 30000000
net.core.wmem_max = 30000000
net.core.somaxconn = 300000
net.ipv4.conf.all.arp_announce = 2
net.ipv4.conf.all.arp_ignore = 1
net.ipv4.conf.default.rp_filter = 1
net.ipv4.conf.default.accept_source_route = 0
net.ipv4.ip_forward = 0
net.ipv4.ip_local_port_range = 1024 65000
net.ipv4.tcp_fin_timeout = 10
net.ipv4.tcp_max_syn_backlog = 30000
net.ipv4.tcp_max_tw_buckets = 2000000
net.ipv4.tcp_mem  = 30000000 30000000 30000000
net.ipv4.tcp_rmem = 30000000 30000000 30000000
net.ipv4.tcp_wmem = 30000000 30000000 30000000
net.ipv4.tcp_timestamps = 0
net.ipv4.tcp_sack = 0
ulimit -n 1048576

Load Driver HW (non-SUT hardware)
Hardware Vendor: IBM Corporation OS Vendor: Red Hat
Model Name: IBM BladeCenter HS21 OS Name: Red Hat Enterprise Linux 5.2
Processor: Quad Core Intel(R) Xeon(R) X5470 Filesystem: Reiser
MHz: 3333 Disks: 1 x 73.4GB SAS 15K rpm
# of CPUs: 8 cores, 2 chips, 4 cores/chip Network Interface: (3) 1000BaseT
Memory (MB): 16384 Other Hardware:
L1 Cache: 32KB(I)+32KB(D) # of Systems: 2
L2 Cache: 2x6MB per chip H/W Available: Nov-2008
Other Cache: OS Available: Oct-2008
Notes / Tuning Information
fs.file-max = 1048576
kernel.sem = 250 32000 100 128
kernel.shmall = 4294967296
kernel.shmmax = 68719476736
net.core.netdev_max_backlog = 400000
net.core.optmem_max = 30000000
net.core.rmem_default = 30000000
net.core.wmem_default = 30000000
net.core.rmem_max = 30000000
net.core.wmem_max = 30000000
net.core.somaxconn = 300000
net.ipv4.conf.default.rp_filter = 1
net.ipv4.conf.default.accept_source_route = 0
net.ipv4.ip_forward = 0
net.ipv4.ip_local_port_range = 1024 65000
net.ipv4.tcp_fin_timeout = 10
net.ipv4.tcp_max_syn_backlog = 30000
net.ipv4.tcp_max_tw_buckets = 2000000
net.ipv4.tcp_mem  = 30000000 30000000 30000000
net.ipv4.tcp_rmem = 30000000 30000000 30000000
net.ipv4.tcp_wmem = 30000000 30000000 30000000
net.ipv4.tcp_timestamps = 0
net.ipv4.tcp_sack = 0
net.ipv4.conf.all.arp_announce = 2
net.ipv4.conf.all.arp_ignore = 1
ulimit -n 1048576

Emulator HW (non-SUT hardware)
Hardware Vendor: IBM Corporation OS Vendor: Novell
Model Name: IBM System x3850 M2 OS Name: Novell SUSE Linux Enterprise Server 10 SP2
Processor: Intel Xeon X7460 Filesystem: Reiser
MHz: 2666 Disks: 2x146Gb 10K 2.5" Hot-Swap SAS HDD
# of CPUs: 12 cores, 2 chips, 6 cores/chip Network Interface: (3) 1000BaseT
Memory (MB): 65536 Other Hardware:
L1 Cache: 32KB(I)+32KB(D) # of Systems: 1
L2 Cache: 9MB(I+D) on chip, per chip (3MB shared / 2 cores) H/W Available: Jun-2009
Other Cache: 16MB(I+D) on chip, per chip OS Available: Oct-2008
Notes / Tuning Information
fs.file-max = 1048576
kernel.sem = 4096 512000 1600 9000
kernel.shmall = 4294967296
kernel.shmmax = 68719476736
net.core.netdev_max_backlog = 400000
net.core.optmem_max = 30000000
net.core.rmem_default = 30000000
net.core.wmem_default = 30000000
net.core.rmem_max = 30000000
net.core.wmem_max = 30000000
net.core.somaxconn = 300000
net.ipv4.conf.default.rp_filter = 1
net.ipv4.conf.default.accept_source_route = 0
net.ipv4.ip_forward = 0
net.ipv4.ip_local_port_range = 1024 65000
net.ipv4.tcp_fin_timeout = 10
net.ipv4.tcp_max_syn_backlog = 30000
net.ipv4.tcp_max_tw_buckets = 2000000
net.ipv4.tcp_mem  = 30000000 30000000 30000000
net.ipv4.tcp_rmem = 30000000 30000000 30000000
net.ipv4.tcp_wmem = 30000000 30000000 30000000
net.ipv4.tcp_timestamps = 0
net.ipv4.tcp_sack = 0
net.ipv4.conf.all.arp_announce = 2
net.ipv4.conf.all.arp_ignore = 1
ulimit -n 1048576

Benchmark Modifications
Schema Modifications:
  No modifications to the schema where made.
Load Program Modifications:
  No modifications to the load programs were made.

Benchmark Configuration Information
Isolation Requirement Info:
  The benchmark meets the isolation level requirements by version column
    checking on entities against the database.
  The ItemEnt bean was cached for 20 minute intervals using
    the WebSphere JPA Object Cache mechanism.
Durability Requirement Info:
  To ensure database durability, RAID10 was used for the
    database logs maintained on the external storage.
    A total of 12 x 146GB disks were used for the log.
Storage Requirement Info:
  Over the course of a 85 minute run at an injection rate of
    1480, the database storage for database system increased by
    1.56 GB.  Given a linear scale, a 24 hour run at the same
    injection rate would increase storage for database system
    by 26.43 GB.  One RAID10 disk array was used to create the
    filesystem space for the database.  The array contained
    12 x 146GB disks providing 876 GB of storage.

Bill of Materials
Supplier  Description                                   Product #          Qty
--------  -------------------------------------------   ----------------   ---
IBM       IBM System x HS22                             7870H4X              1
-          2xIntel Xeon Processor X5670 6C
-            (2.93GHz 12MB L3 Cache 1333MHz 95w)
-          48GB RAM (12x4GB DIMMS), 2x146GB 10k SAS HDD
IBM       3 Year Onsite Repair 24x7 4 Hour Response     6756025
IBM       SUSE Linux Enterprise Server w/ 3yr support   5639S1X              1
IBM       IBM BladeCenter H                             88524SU              1
IBM       3 Year Onsite Repair 24x7 4 Hour Response     40Y5981              1
IBM       IBM PCI Express I/O Expansion Unit            43W4391              1
IBM       DS3524 Express Dual Controller, 4 GB Cache    1746-C4A             1
IBM       6Gbps FC, 146.8 GB/15K HDD                       5205             24
...
IBM       IBM System x3650 M2   325254-B21              7947AC1              1
-          2xIntel Xeon Processor X5570 4C
-            (2.93GHz 8MB L3 Cache 1333MHz 95w)
-          24GB RAM (6x4GB DIMMS), 1x146GB 10k SAS HDD
IBM       3 Year Onsite Repair 24x7 4 Hour Response     6756025
IBM       SUSE Linux Enterprise Server w/ 3yr support   5639S1X              1
...
CDW       NETGEAR ProSafe GS748T 48-port                 698653              1
-           10/100/1000Mbps Gigabit Switch
CDW       NETGEAR 3 Year ProSupport Maintenance          867761              1
-          Contract - OnCall 24x7 - Category 1
...
IBM       IBM DB2 Workgroup Server Edition  9.7         D0A1LLL              1
-         Limited Use Socket Lic+SW Maint 12 Months
IBM       IBM DB2 Workgroup Server Edition 9.7          E07BQLL              2
-         Limited Use Socket SW Maint Rewl 1 Anniv
IBM       WebSphere Application Server V8               D55W8LL             8*
-           Lic+SW Maint 12 Months
IBM       WebSphere Application Server V8               E1CBBLL             16
-           SW Maint Rewl 1 Anniv
...
* Note:  Pricing for WebSphere is based on Value Units (VU).  Each Intel core is 70 VU.


Other Benchmark Information
  DNS round robin load balancing was used and hosted on the database machine
  All network connections were 1Gbps

General Notes
All exceptions in driver logs are from Optimistic Concurrency Checking.
These exceptions are expected in the benchmark.

The IBM DB2 Universal JDBC Drivers is a type 4 driver.

DB2 uses "Soft" checkpoint to ensure that no updates remain unflushed for
longer than the allowed time.

When DB2 UDB Server changes a database table with an update, insert, or delete
operation, the change is initially made in memory, not on disk. When there is
not enough space in the memory buffer to read in or write additional data pages,
DB2 UDB Server will make space by flushing some modified pages to disk.
Modified pages are also written to disk as part of the "Soft" checkpoint to
ensure that no updates remain unflushed for longer than the allowed time.
Before a change is made to the database, it is first recorded in the
transaction log. This ensures that the database can be recovered completely
in the event of a failure. Using the transaction log, transactions that
started but did not complete prior to a failure can be undone, and
transactions recorded as complete in the transaction log but not yet written
to disk can be redone.

DB2 UDB uses a write-ahead-logging protocol to guarantee recovery. This
protocol uses "Soft" checkpoint to write least-recently-used database pages
to disk independent of transaction commit. However, enough log information to
redo/undo the change to a database pages is committed to disk before the
database page itself is written. This protocol therefore renders checkpoint
unnecessary for DB2 UDB. For a more detailed description of the general
principles of the write-ahead-logging protocol, see the IBM research paper,
ARIES: A Transaction Recovery Method Supporting Fine Granularity Locking and
Partial Rollbacks Using Write-Ahead Logging," by C. Mohan, Database Technology
Institute, IBM Almaden Research Center. (http:// portal.acm.org/citation.cfm
?id=128770&coll=portal&dl=ACM&CFID=10343790&CFTOKEN=42047146)


For questions about this result, please contact the submitter: IBM Corporation
For other inquiries, please contact webmaster@spec.org

Copyright © 2009-2011 Standard Performance Evaluation Corporation

First published at SPEC.org on 20-Jun-2011