Hewlett Packard Enterprise ProLiant DL560 Gen10 | SPECpower_ssj2008 = 13,022 overall ssj_ops/watt | ||||
Test Sponsor: | Hewlett Packard Enterprise | SPEC License #: | 3 | Test Method: | Single Node |
Tested By: | Hewlett Packard Enterprise | Test Location: | Houston, TX, USA | Test Date: | Mar 10, 2019 |
Hardware Availability: | Apr-2019 | Software Availability: | Mar-2019 | Publication: | Apr 2, 2019 |
System Source: | Single Supplier | System Designation: | Server | Power Provisioning: | Line-powered |
Performance | Power | Performance to Power Ratio | ||
---|---|---|---|---|
Target Load | Actual Load | ssj_ops | Average Active Power (W) | |
100% | 99.7% | 11,637,630 | 849 | 13,713 |
90% | 90.0% | 10,503,860 | 740 | 14,200 |
80% | 80.0% | 9,337,966 | 632 | 14,786 |
70% | 70.0% | 8,165,330 | 548 | 14,913 |
60% | 60.0% | 7,007,274 | 474 | 14,795 |
50% | 50.0% | 5,836,474 | 409 | 14,267 |
40% | 39.9% | 4,660,634 | 358 | 13,003 |
30% | 30.0% | 3,498,224 | 315 | 11,095 |
20% | 20.0% | 2,331,480 | 272 | 8,560 |
10% | 10.0% | 1,166,866 | 227 | 5,143 |
Active Idle | 0 | 103 | 0 | |
∑ssj_ops / ∑power = | 13,022 |
Set Identifier: | SUT |
Set Description: | System Under Test |
# of Identical Nodes: | 1 |
Comment: | SUT |
Hardware | |
---|---|
Hardware Vendor: | Hewlett Packard Enterprise |
Model: | ProLiant DL560 Gen10 |
Form Factor: | 2U |
CPU Name: | Intel Xeon Platinum 8280 @ 2.70GHz (Intel Turbo Boost Technology up to 4.00 GHz) |
CPU Characteristics: | 28-Core, 2.70 GHz, 38.5MB L3 Cache |
CPU Frequency (MHz): | 2700 |
CPU(s) Enabled: | 112 cores, 4 chips, 28 cores/chip |
Hardware Threads: | 224 (2 / core) |
CPU(s) Orderable: | 1,2,3,4 chips |
Primary Cache: | 32 KB I + 32 KB D on chip per core |
Secondary Cache: | 1 MB I+D on chip per core |
Tertiary Cache: | 39424 KB I+D on chip per chip |
Other Cache: | None |
Memory Amount (GB): | 192 |
# and size of DIMM: | 24 x 8192 MB |
Memory Details: | 8 GB 2Rx8 PC4-2666V-R: slots 1, 3, 5, 8, 10, 12 populated on each socket |
Power Supply Quantity and Rating (W): | 2 x 800 |
Power Supply Details: | HPE 800W Flex Slot Titanium Hot Plug Low Halogen Power Supply Kit 96% (865438-B21) |
Disk Drive: | 1 x HPE 240GB SATA 6G M.2 2280 SSD (875488-B21) |
Disk Controller: | 1 x HPE Smart Array S100i SR Gen10 |
# and type of Network Interface Cards (NICs) Installed: | 1 x HP Ethernet 1Gb 2-port 332T Adapter |
NICs Enabled in Firmware / OS / Connected: | 2/2/1 |
Network Speed (Mbit): | 1000 |
Keyboard: | None |
Mouse: | None |
Monitor: | None |
Optical Drives: | No |
Other Hardware: | None |
Software | |
---|---|
Power Management: | Enabled (see SUT Notes) |
Operating System (OS): | Windows Server 2012 R2 Datacenter |
OS Version: | Version 6.3 (Build 9600) |
Filesystem: | NTFS |
JVM Vendor: | Oracle Corporation |
JVM Version: | Oracle Java HotSpot(TM) 64-Bit Server VM (build 24.80-b11, mixed mode), version 1.7.0_80 |
JVM Command-line Options: | -server -Xmn19g -Xms21g -Xmx21g -XX:SurvivorRatio=1 -XX:TargetSurvivorRatio=99 -XX:AllocatePrefetchDistance=384 -XX:AllocatePrefetchLines=4 -XX:LoopUnrollLimit=37 -XX:InitialTenuringThreshold=12 -XX:MaxTenuringThreshold=15 -XX:ParallelGCThreads=28 -XX:InlineSmallCode=3900 -XX:MaxInlineSize=270 -XX:FreqInlineSize=2000 -XX:+AggressiveOpts -XX:+UseLargePages -XX:+UseParallelOldGC |
JVM Affinity: | start /NODE [0,1,2,3] /AFFINITY [0xFFFFFFF] |
JVM Instances: | 8 |
JVM Initial Heap (MB): | 21000 |
JVM Maximum Heap (MB): | 21000 |
JVM Address Bits: | 64 |
Boot Firmware Version: | U34 v2.00 (02/02/2019) |
Management Firmware Version: | 1.40 Feb 05 2019 |
Workload Version: | SSJ 1.2.10 |
Director Location: | Controller |
Other Software: | HPE Service Pack for ProLiant (SPP) - Version 2019.03.0 (Mar 2019), Microsoft Windows KB4054519, and KB4056898 |
Hardware | |
---|---|
Hardware Vendor: | Hewlett Packard Enterprise |
Model: | ProLiant DL360 G9 |
CPU Description: | 2x Intel Xeon E5-2660 v3 |
Memory amount (GB): | 128 |
Software | |
---|---|
Operating System (OS): | Micorsoft Windows Server 2012 R2 Standard (Version 6.3.9600, Build 9600) |
JVM Vendor: | Oracle Corporation |
JVM Version: | 1.8.0_191 (build 25.191-b12, mixed mode) |
CCS Version: | 1.2.6 |
Power Analyzer pwr1 | |
---|---|
Hardware Vendor: | Yokogawa |
Model: | WT310E |
Serial Number: | C2QM2201V |
Connectivity: | GPIB vi NI GPIB-USB-HS |
Input Connection: | Default |
Metrology Institute: | NIST |
Accredited by: | TRANSCAT |
Calibration Label: | 1-EM8E7-40-1 |
Date of Calibration: | 16-Jul-2018 |
PTDaemon Host System: | same as CCS |
PTDaemon Host OS: | same as CCS |
PTDaemon Version: | 1.8.1-260d064e-20161220 |
Setup Description: | SUT Power Supply 1 and 2 |
Temperature Sensor temp1 | |
---|---|
Hardware Vendor: | Digi International Inc. |
Model: | Watchport/H |
Driver Version: | 5.70.105.0 |
Connectivity: | USB |
PTDaemon Host System: | same as CCS |
PTDaemon Host OS: | same as CCS |
Setup Description: | 5 mm in front of SUT main intake |
Target Load | Average Active Power (W) | Minimum Ambient Temperature (°C) |
---|---|---|
100% | 849 | 23.4 |
90% | 740 | 23.2 |
80% | 632 | 23.2 |
70% | 548 | 23.5 |
60% | 474 | 23.8 |
50% | 409 | 23.8 |
40% | 358 | 23.9 |
30% | 315 | 23.9 |
20% | 272 | 23.7 |
10% | 227 | 23.6 |
Active Idle | 103 | 23.6 |
Line Standard | Minimum Temperature (°C) | Elevation (m) |
---|---|---|
220V / 60 Hz / 1 phase / 2 wires | 23.2 | 132 |
Target Load | Actual Load | ssj_ops | |
---|---|---|---|
Target | Actual | ||
Calibration 1 | 11,681,571 | ||
Calibration 2 | 11,667,263 | ||
Calibration 3 | 11,674,986 | ||
ssj_ops@calibrated=11,671,125 | |||
100% | 99.7% | 11,671,125 | 11,637,630 |
90% | 90.0% | 10,504,012 | 10,503,860 |
80% | 80.0% | 9,336,900 | 9,337,966 |
70% | 70.0% | 8,169,787 | 8,165,330 |
60% | 60.0% | 7,002,675 | 7,007,274 |
50% | 50.0% | 5,835,562 | 5,836,474 |
40% | 39.9% | 4,668,450 | 4,660,634 |
30% | 30.0% | 3,501,337 | 3,498,224 |
20% | 20.0% | 2,334,225 | 2,331,480 |
10% | 10.0% | 1,167,112 | 1,166,866 |
Active Idle | 0 | 0 |