Hewlett Packard Enterprise ProLiant DL385 Gen10 Plus | SPECpower_ssj2008 = 19,629 overall ssj_ops/watt | ||||
Test Sponsor: | Hewlett Packard Enterprise | SPEC License #: | 3 | Test Method: | Single Node |
Tested By: | Hewlett Packard Enterprise | Test Location: | Houston, TX, USA | Test Date: | Feb 25, 2022 |
Hardware Availability: | Mar-2022 | Software Availability: | Jun-2021 | Publication: | Mar 24, 2022 |
System Source: | Single Supplier | System Designation: | Server | Power Provisioning: | Line-powered |
Performance | Power | Performance to Power Ratio | ||
---|---|---|---|---|
Target Load | Actual Load | ssj_ops | Average Active Power (W) | |
100% | 99.7% | 13,211,462 | 548 | 24,130 |
90% | 89.9% | 11,911,840 | 507 | 23,514 |
80% | 79.9% | 10,588,765 | 451 | 23,463 |
70% | 69.9% | 9,268,506 | 417 | 22,251 |
60% | 60.0% | 7,952,119 | 359 | 22,142 |
50% | 50.1% | 6,634,716 | 328 | 20,208 |
40% | 40.0% | 5,295,706 | 292 | 18,162 |
30% | 30.0% | 3,973,197 | 265 | 15,017 |
20% | 20.0% | 2,648,394 | 237 | 11,197 |
10% | 10.0% | 1,323,888 | 207 | 6,409 |
Active Idle | 0 | 101 | 0 | |
∑ssj_ops / ∑power = | 19,629 |
Set Identifier: | SUT |
Set Description: | System Under Test |
# of Identical Nodes: | 1 |
Comment: | SUT |
Hardware | |
---|---|
Hardware Vendor: | Hewlett Packard Enterprise |
Model: | ProLiant DL385 Gen10 Plus |
Form Factor: | 2U |
CPU Name: | AMD EPYC 7773X 2.20 GHz |
CPU Characteristics: | 64-Core, 2.20 GHz 768MB L3 Cache |
CPU Frequency (MHz): | 2200 |
CPU(s) Enabled: | 128 cores, 2 chips, 64 cores/chip |
Hardware Threads: | 256 (2 / core) |
CPU(s) Orderable: | 1,2 chips |
Primary Cache: | 32 KB I + 32 KB D on chip per core |
Secondary Cache: | 512 KB I+D on chip per core |
Tertiary Cache: | 768 MB I+D on chip per chip |
Other Cache: | None |
Memory Amount (GB): | 256 |
# and size of DIMM: | 16 x 16384 MB |
Memory Details: | 16 GB 2Rx8 PC4-3200AA-R; slots 1, 3, 5, 7, 10, 12, 14 and 16 populated on each socket |
Power Supply Quantity and Rating (W): | 1 x 800 |
Power Supply Details: | HPE 800W Flex Slot Titanium Hot Plug Low Halogen Power Supply Kit (865438-B21) |
Disk Drive: | 1 x HPE 480GB SATA 6G SSD (P05976-B21) |
Disk Controller: | Embedded SATA Controller |
# and type of Network Interface Cards (NICs) Installed: | 1 x Intel Ethernet I350 4-Port 1Gb NIC |
NICs Enabled in Firmware / OS / Connected: | 4/4/1 |
Network Speed (Mbit): | 1000 |
Keyboard: | None |
Mouse: | None |
Monitor: | None |
Optical Drives: | No |
Other Hardware: | None |
Software | |
---|---|
Power Management: | Enabled (see SUT Notes) |
Operating System (OS): | SUSE Linux Enterprise Server 15 SP3 |
OS Version: | 5.3.18-57-default |
Filesystem: | xfs |
JVM Vendor: | Oracle Corporation |
JVM Version: | Java HotSpot(TM) 64-Bit Server VM 18.9 (build 11.0.11+9-LTS-194, mixed mode) |
JVM Command-line Options: | -server -Xmn1700m -Xms1950m -Xmx1950m -XX:UseSSE=4 -XX:UseAVX=1 -XX:SurvivorRatio=1 -XX:TargetSurvivorRatio=99 -XX:ParallelGCThreads=2 -XX:AllocatePrefetchDistance=256 -XX:AllocatePrefetchLines=2 -XX:LoopUnrollLimit=45 -XX:InitialTenuringThreshold=12 -XX:MaxTenuringThreshold=15 -XX:InlineSmallCode=3900 -XX:MaxInlineSize=270 -XX:FreqInlineSize=2500 -XX:+UseLargePages -XX:+UseParallelOldGC -XX:+UseHugeTLBFS -XX:+UseTransparentHugePages |
JVM Affinity: | for each even physicalCoreId { numactl -C physicalCoreId, physicalCoreId+1, physicalCoreId + 128, physicalCoreId + 129 } |
JVM Instances: | 64 |
JVM Initial Heap (MB): | 1950 |
JVM Maximum Heap (MB): | 1950 |
JVM Address Bits: | 64 |
Boot Firmware Version: | A42 v2.56 (02/10/2022) |
Management Firmware Version: | 2.68 Feb 07 2022 |
Workload Version: | SSJ 1.2.10 |
Director Location: | Controller |
Other Software: | None |
Hardware | |
---|---|
Hardware Vendor: | Hewlett Packard Enterprise |
Model: | ProLiant DL360 Gen9 |
CPU Description: | 2x Intel Xeon E5-2660 v3 |
Memory amount (GB): | 128 |
Software | |
---|---|
Operating System (OS): | Windows Server 2012 R2 |
JVM Vendor: | Oracle Corporation |
JVM Version: | 1.8.0_241-b07 (build 25.241-b07, mixed mode) |
CCS Version: | 1.2.6 |
Power Analyzer pwr1 | |
---|---|
Hardware Vendor: | Yokogawa |
Model: | WT310 |
Serial Number: | C2QM22004V |
Connectivity: | GPIB vi NI GPIB-USB-HS |
Input Connection: | Default |
Metrology Institute: | NIST |
Accredited by: | TRANSCAT |
Calibration Label: | 5-FQ7PK-60-1 |
Date of Calibration: | 26-Jun-2021 |
PTDaemon Host System: | same as CCS |
PTDaemon Host OS: | same as CCS |
PTDaemon Version: | 1.9.2-3976349f-20201208 |
Setup Description: | SUT Power Supply 1 |
Temperature Sensor temp1 | |
---|---|
Hardware Vendor: | Digi International Inc. |
Model: | Watchport/H |
Driver Version: | 5.70.105.0 |
Connectivity: | USB |
PTDaemon Host System: | same as CCS |
PTDaemon Host OS: | same as CCS |
Setup Description: | 5 mm in front of SUT main intake |
Target Load | Average Active Power (W) | Minimum Ambient Temperature (°C) |
---|---|---|
100% | 548 | 22.4 |
90% | 507 | 22.4 |
80% | 451 | 22.4 |
70% | 417 | 22.5 |
60% | 359 | 22.6 |
50% | 328 | 22.6 |
40% | 292 | 22.5 |
30% | 265 | 22.5 |
20% | 237 | 22.4 |
10% | 207 | 22.4 |
Active Idle | 101 | 22.5 |
Line Standard | Minimum Temperature (°C) | Elevation (m) |
---|---|---|
208V / 60 Hz / 1 phase / 2 wires | 22.4 | 132 |
Target Load | Actual Load | ssj_ops | |
---|---|---|---|
Target | Actual | ||
Calibration 1 | 12,704,543 | ||
Calibration 2 | 13,251,692 | ||
Calibration 3 | 13,255,592 | ||
ssj_ops@calibrated=13,253,642 | |||
100% | 99.7% | 13,253,642 | 13,211,462 |
90% | 89.9% | 11,928,278 | 11,911,840 |
80% | 79.9% | 10,602,913 | 10,588,765 |
70% | 69.9% | 9,277,549 | 9,268,506 |
60% | 60.0% | 7,952,185 | 7,952,119 |
50% | 50.1% | 6,626,821 | 6,634,716 |
40% | 40.0% | 5,301,457 | 5,295,706 |
30% | 30.0% | 3,976,093 | 3,973,197 |
20% | 20.0% | 2,650,728 | 2,648,394 |
10% | 10.0% | 1,325,364 | 1,323,888 |
Active Idle | 0 | 0 |